Merge tag 'soc-fixes-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC fixes from Arnd Bergmann:
 "There are a few minor code fixes for tegra firmware, i.MX firmware
  and the eyeq reset controller, and a MAINTAINERS update as Alyssa
  Rosenzweig moves on to non-kernel projects.

  The other changes are all for devicetree files:

   - Multiple Marvell Armada SoCs need changes to fix PCIe, audio and
     SATA

   - A socfpga board fails to probe the ethernet phy

   - The two temperature sensors on i.MX8MP are swapped

   - Allwinner devicetree files cause build-time warnings

   - Two Rockchip based boards need corrections for headphone detection
     and SPI flash"

* tag 'soc-fixes-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  MAINTAINERS: remove Alyssa Rosenzweig
  firmware: tegra: Do not warn on missing memory-region property
  arm64: dts: marvell: cn9132-clearfog: fix multi-lane pci x2 and x4 ports
  arm64: dts: marvell: cn9132-clearfog: disable eMMC high-speed modes
  arm64: dts: marvell: cn913x-solidrun: fix sata ports status
  ARM: dts: kirkwood: Fix sound DAI cells for OpenRD clients
  arm64: dts: imx8mp: Correct thermal sensor index
  ARM: imx: Kconfig: Adjust select after renamed config option
  firmware: imx: Add stub functions for SCMI CPU API
  firmware: imx: Add stub functions for SCMI LMM API
  firmware: imx: Add stub functions for SCMI MISC API
  riscv: dts: allwinner: rename devterm i2c-gpio node to comply with binding
  arm64: dts: rockchip: Fix the headphone detection on the orangepi 5
  arm64: dts: rockchip: Add vcc supply for SPI Flash on NanoPC-T6
  ARM: dts: socfpga: sodia: Fix mdio bus probe and PHY address
  reset: eyeq: fix OF node leak
  ARM64: dts: mcbin: fix SATA ports on Macchiatobin
  ARM: dts: armada-370-db: Fix stereo audio input routing on Armada 370
  ARM: dts: allwinner: Minor whitespace cleanup

17 files changed, 50 insertions, 25 deletions

diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts
index 83d283cf6633..d425d9ee83db 100644
--- a/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts
@@ -218,7 +218,7 @@
 &usbphy {
 	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH5 */
-	usb0_vbus-supply   = <&reg_usb0_vbus>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi b/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi
index 272584881bb2..a0f787581dd9 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi
@@ -82,7 +82,7 @@
 };
 
 &ehci0 {
-	status  = "okay";
+	status = "okay";
 };
 
 &mmc1 {
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi b/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi
index fa162f7fa9f0..f0ed802a9d08 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi
@@ -705,7 +705,7 @@
 			};
 
 			/omit-if-no-ref/
-			uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins{
+			uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins {
 				pins = "PI16", "PI17";
 				function = "uart2";
 			};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts
index 5143cb4e7b78..cb6292319f39 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts
@@ -29,7 +29,7 @@
 	clk_can0: clock-can0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency  = <40000000>;
+		clock-frequency = <40000000>;
 	};
 
 	gpio-keys {
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
index ce0d6514eeb5..e4794ccb8e41 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
@@ -66,8 +66,10 @@
 	mdio0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		phy0: ethernet-phy@0 {
-			reg = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0: ethernet-phy@4 {
+			reg = <4>;
 			rxd0-skew-ps = <0>;
 			rxd1-skew-ps = <0>;
 			rxd2-skew-ps = <0>;
diff --git a/arch/arm/boot/dts/marvell/armada-370-db.dts b/arch/arm/boot/dts/marvell/armada-370-db.dts
index a7dc4c04d10b..a9a05d826f22 100644
--- a/arch/arm/boot/dts/marvell/armada-370-db.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-db.dts
@@ -119,7 +119,7 @@
 			"Out Jack", "HPL",
 			"Out Jack", "HPR",
 			"AIN1L", "In Jack",
-			"AIN1L", "In Jack";
+			"AIN1R", "In Jack";
 		status = "okay";
 
 		simple-audio-card,dai-link@0 {
diff --git a/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts b/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts
index d4e0b8150a84..cf26e2ceaaa0 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts
@@ -38,7 +38,7 @@
 		simple-audio-card,mclk-fs = <256>;
 
 		simple-audio-card,cpu {
-			sound-dai = <&audio0 0>;
+			sound-dai = <&audio0>;
 		};
 
 		simple-audio-card,codec {
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index dc47b2312127..6ea1bd55acf8 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -242,7 +242,7 @@ choice
 
 	config VF_USE_PIT_TIMER
 		bool "Use PIT timer"
-		select VF_PIT_TIMER
+		select NXP_PIT_TIMER
 		help
 		  Use SoC Periodic Interrupt Timer (PIT) as clocksource
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index bb24dba7338e..d6d21e8498dc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -298,7 +298,7 @@
 		cpu-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <2000>;
-			thermal-sensors = <&tmu 0>;
+			thermal-sensors = <&tmu 1>;
 			trips {
 				cpu_alert0: trip0 {
 					temperature = <85000>;
@@ -331,7 +331,7 @@
 		soc-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <2000>;
-			thermal-sensors = <&tmu 1>;
+			thermal-sensors = <&tmu 0>;
 			trips {
 				soc_alert0: trip0 {
 					temperature = <85000>;
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index 0d4a5fd9503f..f2d278d171eb 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -345,11 +345,13 @@
 	/* CPS Lane 1 - U32 */
 	sata-port@0 {
 		phys = <&cp1_comphy1 0>;
+		status = "okay";
 	};
 
 	/* CPS Lane 3 - U31 */
 	sata-port@1 {
 		phys = <&cp1_comphy3 1>;
+		status = "okay";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi b/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi
index ad0ab34b6602..bd42bfbe408b 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi
@@ -152,11 +152,12 @@
 
 /* SRDS #0 - SATA on M.2 connector */
 &cp0_sata0 {
-	phys = <&cp0_comphy0 1>;
 	status = "okay";
 
-	/* only port 1 is available */
-	/delete-node/ sata-port@0;
+	sata-port@1 {
+		phys = <&cp0_comphy0 1>;
+		status = "okay";
+	};
 };
 
 /* microSD */
diff --git a/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
index 47234d0858dd..338853d3b179 100644
--- a/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
+++ b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
@@ -563,11 +563,13 @@
 
 /* SRDS #1 - SATA on M.2 (J44) */
 &cp1_sata0 {
-	phys = <&cp1_comphy1 0>;
 	status = "okay";
 
 	/* only port 0 is available */
-	/delete-node/ sata-port@1;
+	sata-port@0 {
+		phys = <&cp1_comphy1 0>;
+		status = "okay";
+	};
 };
 
 &cp1_syscon0 {
diff --git a/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
index 0f53745a6fa0..6f237d3542b9 100644
--- a/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
+++ b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
@@ -413,7 +413,13 @@
 /* SRDS #0,#1,#2,#3 - PCIe */
 &cp0_pcie0 {
 	num-lanes = <4>;
-	phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, <&cp0_comphy2 0>, <&cp0_comphy3 0>;
+	/*
+	 * The mvebu-comphy driver does not currently know how to pass correct
+	 * lane-count to ATF while configuring the serdes lanes.
+	 * Rely on bootloader configuration only.
+	 *
+	 * phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, <&cp0_comphy2 0>, <&cp0_comphy3 0>;
+	 */
 	status = "okay";
 };
 
@@ -475,7 +481,13 @@
 /* SRDS #0,#1 - PCIe */
 &cp1_pcie0 {
 	num-lanes = <2>;
-	phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>;
+	/*
+	 * The mvebu-comphy driver does not currently know how to pass correct
+	 * lane-count to ATF while configuring the serdes lanes.
+	 * Rely on bootloader configuration only.
+	 *
+	 * phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>;
+	 */
 	status = "okay";
 };
 
@@ -512,10 +524,9 @@
 	status = "okay";
 
 	/* only port 1 is available */
-	/delete-node/ sata-port@0;
-
 	sata-port@1 {
 		phys = <&cp1_comphy3 1>;
+		status = "okay";
 	};
 };
 
@@ -631,9 +642,8 @@
 	status = "okay";
 
 	/* only port 1 is available */
-	/delete-node/ sata-port@0;
-
 	sata-port@1 {
+		status = "okay";
 		phys = <&cp2_comphy3 1>;
 	};
 };
diff --git a/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi b/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi
index afc041c1c448..bb2bb47fd77c 100644
--- a/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi
@@ -137,6 +137,14 @@
 	pinctrl-0 = <&ap_mmc0_pins>;
 	pinctrl-names = "default";
 	vqmmc-supply = <&v_1_8>;
+	/*
+	 * Not stable in HS modes - phy needs "more calibration", so disable
+	 * UHS (by preventing voltage switch), SDR104, SDR50 and DDR50 modes.
+	 */
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	non-removable;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
index 3d8b6f0c5541..69833a0a94d0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
@@ -731,6 +731,7 @@
 		spi-max-frequency = <104000000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <1>;
+		vcc-supply = <&vcc_1v8_s3>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
index 4fedc50cce8c..11940c77f2bd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
@@ -42,9 +42,8 @@
 		simple-audio-card,bitclock-master = <&masterdai>;
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&masterdai>;
-		simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
+		simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
 		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,pin-switches = "Headphones";
 		simple-audio-card,routing =
 			"Headphones", "LOUT1",
 			"Headphones", "ROUT1",
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dts
index bc5c84f22762..5f2e5cc3e3d5 100644
--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dts
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dts
@@ -17,7 +17,7 @@
 		#cooling-cells = <2>;
 	};
 
-	i2c-gpio-0 {
+	i2c-0 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&pio 3 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PD14/GPIO44 */
 		scl-gpios = <&pio 3 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PD15/GPIO45 */