Merge tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "This has two exciting community drivers for ARM Mali accelerators.
  Since ARM has never been open source friendly on the GPU side of the
  house, the community has had to create open source drivers for the
  Mali GPUs. Lima covers the older t4xx and panfrost the newer 6xx/7xx
  series. Well done to all involved and hopefully this will help ARM
  head in the right direction.

  There is also now the ability if you don't have any of the legacy
  drivers enabled (pre-KMS) to remove all the pre-KMS support code from
  the core drm, this saves 10% or so in codesize on my machine.

  i915 also enable Icelake/Elkhart Lake Gen11 GPUs by default, vboxvideo
  moves out of staging.

  There are also some rcar-du patches which crossover with media tree
  but all should be acked by Mauro.

  Summary:

  uapi changes:
   - Colorspace connector property
   - fourcc - new YUV formts
   - timeline sync objects initially merged
   - expose FB_DAMAGE_CLIPS to atomic userspace

  new drivers:
   - vboxvideo: moved out of staging
   - aspeed: ASPEED SoC BMC chip display support
   - lima: ARM Mali4xx GPU acceleration driver support
   - panfrost: ARM Mali6xx/7xx Midgard/Bitfrost acceleration driver support

  core:
   - component helper docs
   - unplugging fixes
   - devm device init
   - MIPI/DSI rate control
   - shmem backed gem objects
   - connector, display_info, edid_quirks cleanups
   - dma_buf fence chain support
   - 64-bit dma-fence seqno comparison fixes
   - move initial fb config code to core
   - gem fence array helpers for Lima
   - ability to remove legacy support code if no drivers requires it (removes 10% of drm.ko size)
   - lease fixes

  ttm:
   - unified DRM_FILE_PAGE_OFFSET handling
   - Account for kernel allocations in kernel zone only

  panel:
   - OSD070T1718-19TS panel support
   - panel-tpo-td028ttec1 backlight support
   - Ronbo RB070D30 MIPI/DSI
   - Feiyang FY07024DI26A30-D MIPI-DSI panel
   - Rocktech jh057n00900 MIPI-DSI panel

  i915:
   - Comet Lake (Gen9) PCI IDs
   - Updated Icelake PCI IDs
   - Elkhartlake (Gen11) support
   - DP MST property addtions
   - plane and watermark fixes
   - Icelake port sync and VEBOX disable fixes
   - struct_mutex usage reduction
   - Icelake gamma fix
   - GuC reset fixes
   - make mmap more asynchronous
   - sound display power well race fixes
   - DDI/MIPI-DSI clocks for Icelake
   - Icelake RPS frequency changing support
   - Icelake workarounds

  amdgpu:
   - Use HMM for userptr
   - vega20 experimental smu11 support
   - RAS support for vega20
   - BACO support for vega12 + fixes for vega20
   - reworked IH interrupt handling
   - amdkfd RAS support
   - Freesync improvements
   - initial timeline sync object support
   - DC Z ordering fixes
   - NV12 planes support
   - colorspace properties for planes=
   - eDP opts if eDP already initialized

  nouveau:
   - misc fixes

  etnaviv:
   - misc fixes

  msm:
   - GPU zap shader support expansion
   - robustness ABI addition

  exynos:
   - Logging cleanups

  tegra:
   - Shared reset fix
   - CPU cache maintenance fix

  cirrus:
   - driver rewritten using simple helpers

  meson:
   - G12A support

  vmwgfx:
   - Resource dirtying management improvements
   - Userspace logging improvements

  virtio:
   - PRIME fixes

  rockchip:
   - rk3066 hdmi support

  sun4i:
   - DSI burst mode support

  vc4:
   - load tracker to detect underflow

  v3d:
   - v3d v4.2 support

  malidp:
   - initial Mali D71 support in komeda driver

  tfp410:
   - omap related improvement

  omapdrm:
   - drm bridge/panel support
   - drop some omap specific panels

  rcar-du:
   - Display writeback support"

* tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm: (1507 commits)
  drm/msm/a6xx: No zap shader is not an error
  drm/cma-helper: Fix drm_gem_cma_free_object()
  drm: Fix timestamp docs for variable refresh properties.
  drm/komeda: Mark the local functions as static
  drm/komeda: Fixed warning: Function parameter or member not described
  drm/komeda: Expose bus_width to Komeda-CORE
  drm/komeda: Add sysfs attribute: core_id and config_id
  drm: add non-desktop quirk for Valve HMDs
  drm/panfrost: Show stored feature registers
  drm/panfrost: Don't scream about deferred probe
  drm/panfrost: Disable PM on probe failure
  drm/panfrost: Set DMA masks earlier
  drm/panfrost: Add sanity checks to submit IOCTL
  drm/etnaviv: initialize idle mask before querying the HW db
  drm: introduce a capability flag for syncobj timeline support
  drm: report consistent errors when checking syncobj capibility
  drm/nouveau/nouveau: forward error generated while resuming objects tree
  drm/nouveau/fb/ramgk104: fix spelling mistake "sucessfully" -> "successfully"
  drm/nouveau/i2c: Disable i2c bus access after ->fini()
  drm/nouveau: Remove duplicate ACPI_VIDEO_NOTIFY_PROBE definition
  ...

7 files changed, 109 insertions, 389 deletions

diff --git a/drivers/gpu/drm/amd/include/amd_shared.h b/drivers/gpu/drm/amd/include/amd_shared.h
index 470d7b89071a..574bf6e70763 100644
--- a/drivers/gpu/drm/amd/include/amd_shared.h
+++ b/drivers/gpu/drm/amd/include/amd_shared.h
@@ -137,6 +137,7 @@ enum DC_FEATURE_MASK {
 	DC_FBC_MASK = 0x1,
 };
 
+enum amd_dpm_forced_level;
 /**
  * struct amd_ip_funcs - general hooks for managing amdgpu IP Blocks
  */
@@ -186,6 +187,8 @@ struct amd_ip_funcs {
 				     enum amd_powergating_state state);
 	/** @get_clockgating_state: get current clockgating status */
 	void (*get_clockgating_state)(void *handle, u32 *flags);
+	/** @enable_umd_pstate: enable UMD powerstate */
+	int (*enable_umd_pstate)(void *handle, enum amd_dpm_forced_level *level);
 };
 
 
diff --git a/drivers/gpu/drm/amd/include/asic_reg/dcn/dcn_1_0_offset.h b/drivers/gpu/drm/amd/include/asic_reg/dcn/dcn_1_0_offset.h
index 721c61171045..5a44e614ab7e 100644
--- a/drivers/gpu/drm/amd/include/asic_reg/dcn/dcn_1_0_offset.h
+++ b/drivers/gpu/drm/amd/include/asic_reg/dcn/dcn_1_0_offset.h
@@ -2347,6 +2347,8 @@
 #define mmHUBP0_DCHUBP_VMPG_CONFIG_BASE_IDX                                                            2
 #define mmHUBP0_HUBPREQ_DEBUG_DB                                                                       0x0569
 #define mmHUBP0_HUBPREQ_DEBUG_DB_BASE_IDX                                                              2
+#define mmHUBP0_HUBPREQ_DEBUG                                                                          0x056a
+#define mmHUBP0_HUBPREQ_DEBUG_BASE_IDX                                                                 2
 #define mmHUBP0_HUBP_MEASURE_WIN_CTRL_DCFCLK                                                           0x056e
 #define mmHUBP0_HUBP_MEASURE_WIN_CTRL_DCFCLK_BASE_IDX                                                  2
 #define mmHUBP0_HUBP_MEASURE_WIN_CTRL_DPPCLK                                                           0x056f
@@ -2631,6 +2633,8 @@
 #define mmHUBP1_DCHUBP_VMPG_CONFIG_BASE_IDX                                                            2
 #define mmHUBP1_HUBPREQ_DEBUG_DB                                                                       0x062d
 #define mmHUBP1_HUBPREQ_DEBUG_DB_BASE_IDX                                                              2
+#define mmHUBP1_HUBPREQ_DEBUG                                                                          0x062e
+#define mmHUBP1_HUBPREQ_DEBUG_BASE_IDX                                                                 2
 #define mmHUBP1_HUBP_MEASURE_WIN_CTRL_DCFCLK                                                           0x0632
 #define mmHUBP1_HUBP_MEASURE_WIN_CTRL_DCFCLK_BASE_IDX                                                  2
 #define mmHUBP1_HUBP_MEASURE_WIN_CTRL_DPPCLK                                                           0x0633
@@ -2915,6 +2919,8 @@
 #define mmHUBP2_DCHUBP_VMPG_CONFIG_BASE_IDX                                                            2
 #define mmHUBP2_HUBPREQ_DEBUG_DB                                                                       0x06f1
 #define mmHUBP2_HUBPREQ_DEBUG_DB_BASE_IDX                                                              2
+#define mmHUBP2_HUBPREQ_DEBUG                                                                          0x06f2
+#define mmHUBP2_HUBPREQ_DEBUG_BASE_IDX                                                                 2
 #define mmHUBP2_HUBP_MEASURE_WIN_CTRL_DCFCLK                                                           0x06f6
 #define mmHUBP2_HUBP_MEASURE_WIN_CTRL_DCFCLK_BASE_IDX                                                  2
 #define mmHUBP2_HUBP_MEASURE_WIN_CTRL_DPPCLK                                                           0x06f7
@@ -3199,6 +3205,8 @@
 #define mmHUBP3_DCHUBP_VMPG_CONFIG_BASE_IDX                                                            2
 #define mmHUBP3_HUBPREQ_DEBUG_DB                                                                       0x07b5
 #define mmHUBP3_HUBPREQ_DEBUG_DB_BASE_IDX                                                              2
+#define mmHUBP3_HUBPREQ_DEBUG                                                                          0x07b6
+#define mmHUBP3_HUBPREQ_DEBUG_BASE_IDX                                                                 2
 #define mmHUBP3_HUBP_MEASURE_WIN_CTRL_DCFCLK                                                           0x07ba
 #define mmHUBP3_HUBP_MEASURE_WIN_CTRL_DCFCLK_BASE_IDX                                                  2
 #define mmHUBP3_HUBP_MEASURE_WIN_CTRL_DPPCLK                                                           0x07bb
diff --git a/drivers/gpu/drm/amd/include/asic_reg/vcn/vcn_1_0_offset.h b/drivers/gpu/drm/amd/include/asic_reg/vcn/vcn_1_0_offset.h
index 442ca7c471a5..6109f5ad25ad 100644
--- a/drivers/gpu/drm/amd/include/asic_reg/vcn/vcn_1_0_offset.h
+++ b/drivers/gpu/drm/amd/include/asic_reg/vcn/vcn_1_0_offset.h
@@ -141,6 +141,8 @@
 #define mmUVD_GPCOM_VCPU_DATA0_BASE_IDX                                                                1
 #define mmUVD_GPCOM_VCPU_DATA1                                                                         0x03c5
 #define mmUVD_GPCOM_VCPU_DATA1_BASE_IDX                                                                1
+#define mmUVD_ENGINE_CNTL                                                                              0x03c6
+#define mmUVD_ENGINE_CNTL_BASE_IDX                                                                     1
 #define mmUVD_UDEC_DBW_UV_ADDR_CONFIG                                                                  0x03d2
 #define mmUVD_UDEC_DBW_UV_ADDR_CONFIG_BASE_IDX                                                         1
 #define mmUVD_UDEC_ADDR_CONFIG                                                                         0x03d3
diff --git a/drivers/gpu/drm/amd/include/asic_reg/vcn/vcn_1_0_sh_mask.h b/drivers/gpu/drm/amd/include/asic_reg/vcn/vcn_1_0_sh_mask.h
index 63457f9df4c5..f84bed6eecb9 100644
--- a/drivers/gpu/drm/amd/include/asic_reg/vcn/vcn_1_0_sh_mask.h
+++ b/drivers/gpu/drm/amd/include/asic_reg/vcn/vcn_1_0_sh_mask.h
@@ -312,6 +312,11 @@
 //UVD_GPCOM_VCPU_DATA1
 #define UVD_GPCOM_VCPU_DATA1__DATA1__SHIFT                                                                    0x0
 #define UVD_GPCOM_VCPU_DATA1__DATA1_MASK                                                                      0xFFFFFFFFL
+//UVD_ENGINE_CNTL
+#define UVD_ENGINE_CNTL__ENGINE_START_MASK 0x1
+#define UVD_ENGINE_CNTL__ENGINE_START__SHIFT 0x0
+#define UVD_ENGINE_CNTL__ENGINE_START_MODE_MASK 0x2
+#define UVD_ENGINE_CNTL__ENGINE_START_MODE__SHIFT 0x1
 //UVD_UDEC_DBW_UV_ADDR_CONFIG
 #define UVD_UDEC_DBW_UV_ADDR_CONFIG__NUM_PIPES__SHIFT                                                         0x0
 #define UVD_UDEC_DBW_UV_ADDR_CONFIG__PIPE_INTERLEAVE_SIZE__SHIFT                                              0x3
diff --git a/drivers/gpu/drm/amd/include/atomfirmware.h b/drivers/gpu/drm/amd/include/atomfirmware.h
index 8eb0bb241210..d3075adb3297 100644
--- a/drivers/gpu/drm/amd/include/atomfirmware.h
+++ b/drivers/gpu/drm/amd/include/atomfirmware.h
@@ -494,6 +494,9 @@ enum atombios_firmware_capability
   ATOM_FIRMWARE_CAP_FIRMWARE_POSTED = 0x00000001,
   ATOM_FIRMWARE_CAP_GPU_VIRTUALIZATION  = 0x00000002,
   ATOM_FIRMWARE_CAP_WMI_SUPPORT  = 0x00000040,
+  ATOM_FIRMWARE_CAP_HWEMU_ENABLE  = 0x00000080,
+  ATOM_FIRMWARE_CAP_HWEMU_UMC_CFG = 0x00000100,
+  ATOM_FIRMWARE_CAP_SRAM_ECC      = 0x00000200,
 };
 
 enum atom_cooling_solution_id{
@@ -528,6 +531,35 @@ struct atom_firmware_info_v3_2 {
   uint32_t reserved2[3];
 };
 
+struct atom_firmware_info_v3_3
+{
+  struct atom_common_table_header table_header;
+  uint32_t firmware_revision;
+  uint32_t bootup_sclk_in10khz;
+  uint32_t bootup_mclk_in10khz;
+  uint32_t firmware_capability;             // enum atombios_firmware_capability
+  uint32_t main_call_parser_entry;          /* direct address of main parser call in VBIOS binary. */
+  uint32_t bios_scratch_reg_startaddr;      // 1st bios scratch register dword address
+  uint16_t bootup_vddc_mv;
+  uint16_t bootup_vddci_mv;
+  uint16_t bootup_mvddc_mv;
+  uint16_t bootup_vddgfx_mv;
+  uint8_t  mem_module_id;
+  uint8_t  coolingsolution_id;              /*0: Air cooling; 1: Liquid cooling ... */
+  uint8_t  reserved1[2];
+  uint32_t mc_baseaddr_high;
+  uint32_t mc_baseaddr_low;
+  uint8_t  board_i2c_feature_id;            // enum of atom_board_i2c_feature_id_def
+  uint8_t  board_i2c_feature_gpio_id;       // i2c id find in gpio_lut data table gpio_id
+  uint8_t  board_i2c_feature_slave_addr;
+  uint8_t  reserved3;
+  uint16_t bootup_mvddq_mv;
+  uint16_t bootup_mvpp_mv;
+  uint32_t zfbstartaddrin16mb;
+  uint32_t pplib_pptable_id;                // if pplib_pptable_id!=0, pplib get powerplay table inside driver instead of from VBIOS
+  uint32_t reserved2[2];
+};
+
 /* 
   ***************************************************************************
     Data Table lcd_info  structure
@@ -686,6 +718,7 @@ enum atom_encoder_caps_def
   ATOM_ENCODER_CAP_RECORD_HBR2_EN               =0x02,         // DP1.2 HBR2 setting is qualified and HBR2 can be enabled 
   ATOM_ENCODER_CAP_RECORD_HDMI6Gbps_EN          =0x04,         // HDMI2.0 6Gbps enable or not. 
   ATOM_ENCODER_CAP_RECORD_HBR3_EN               =0x08,         // DP1.3 HBR3 is supported by board. 
+  ATOM_ENCODER_CAP_RECORD_USB_C_TYPE            =0x100,        // the DP connector is a USB-C type.
 };
 
 struct  atom_encoder_caps_record
@@ -1226,16 +1259,17 @@ struct  atom_gfx_info_v2_3 {
   uint32_t rm21_sram_vmin_value;
 };
 
-struct  atom_gfx_info_v2_4 {
+struct  atom_gfx_info_v2_4
+{
   struct  atom_common_table_header  table_header;
   uint8_t gfxip_min_ver;
   uint8_t gfxip_max_ver;
-  uint8_t gc_num_se;
-  uint8_t max_tile_pipes;
-  uint8_t gc_num_cu_per_sh;
-  uint8_t gc_num_sh_per_se;
-  uint8_t gc_num_rb_per_se;
-  uint8_t gc_num_tccs;
+  uint8_t max_shader_engines;
+  uint8_t reserved;
+  uint8_t max_cu_per_sh;
+  uint8_t max_sh_per_se;
+  uint8_t max_backends_per_se;
+  uint8_t max_texture_channel_caches;
   uint32_t regaddr_cp_dma_src_addr;
   uint32_t regaddr_cp_dma_src_addr_hi;
   uint32_t regaddr_cp_dma_dst_addr;
@@ -1780,6 +1814,56 @@ struct atom_umc_info_v3_1
   uint32_t mem_refclk_10khz;
 };
 
+// umc_info.umc_config
+enum atom_umc_config_def {
+  UMC_CONFIG__ENABLE_1KB_INTERLEAVE_MODE  =   0x00000001,
+  UMC_CONFIG__DEFAULT_MEM_ECC_ENABLE      =   0x00000002,
+  UMC_CONFIG__ENABLE_HBM_LANE_REPAIR      =   0x00000004,
+  UMC_CONFIG__ENABLE_BANK_HARVESTING      =   0x00000008,
+  UMC_CONFIG__ENABLE_PHY_REINIT           =   0x00000010,
+  UMC_CONFIG__DISABLE_UCODE_CHKSTATUS     =   0x00000020,
+};
+
+struct atom_umc_info_v3_2
+{
+  struct  atom_common_table_header  table_header;
+  uint32_t ucode_version;
+  uint32_t ucode_rom_startaddr;
+  uint32_t ucode_length;
+  uint16_t umc_reg_init_offset;
+  uint16_t customer_ucode_name_offset;
+  uint16_t mclk_ss_percentage;
+  uint16_t mclk_ss_rate_10hz;
+  uint8_t umcip_min_ver;
+  uint8_t umcip_max_ver;
+  uint8_t vram_type;              //enum of atom_dgpu_vram_type
+  uint8_t umc_config;
+  uint32_t mem_refclk_10khz;
+  uint32_t pstate_uclk_10khz[4];
+  uint16_t umcgoldenoffset;
+  uint16_t densitygoldenoffset;
+};
+
+struct atom_umc_info_v3_3
+{
+  struct  atom_common_table_header  table_header;
+  uint32_t ucode_reserved;
+  uint32_t ucode_rom_startaddr;
+  uint32_t ucode_length;
+  uint16_t umc_reg_init_offset;
+  uint16_t customer_ucode_name_offset;
+  uint16_t mclk_ss_percentage;
+  uint16_t mclk_ss_rate_10hz;
+  uint8_t umcip_min_ver;
+  uint8_t umcip_max_ver;
+  uint8_t vram_type;              //enum of atom_dgpu_vram_type
+  uint8_t umc_config;
+  uint32_t mem_refclk_10khz;
+  uint32_t pstate_uclk_10khz[4];
+  uint16_t umcgoldenoffset;
+  uint16_t densitygoldenoffset;
+  uint32_t reserved[4];
+};
 
 /* 
   ***************************************************************************
diff --git a/drivers/gpu/drm/amd/include/kgd_kfd_interface.h b/drivers/gpu/drm/amd/include/kgd_kfd_interface.h
index 5f3c10ebff08..b897aca9b4c9 100644
--- a/drivers/gpu/drm/amd/include/kgd_kfd_interface.h
+++ b/drivers/gpu/drm/amd/include/kgd_kfd_interface.h
@@ -85,18 +85,6 @@ enum kgd_memory_pool {
 	KGD_POOL_FRAMEBUFFER = 3,
 };
 
-enum kgd_engine_type {
-	KGD_ENGINE_PFP = 1,
-	KGD_ENGINE_ME,
-	KGD_ENGINE_CE,
-	KGD_ENGINE_MEC1,
-	KGD_ENGINE_MEC2,
-	KGD_ENGINE_RLC,
-	KGD_ENGINE_SDMA1,
-	KGD_ENGINE_SDMA2,
-	KGD_ENGINE_MAX
-};
-
 /**
  * enum kfd_sched_policy
  *
@@ -230,8 +218,6 @@ struct tile_config {
  * @hqd_sdma_destroy: Destructs and preempts the SDMA queue assigned to that
  * SDMA hqd slot.
  *
- * @get_fw_version: Returns FW versions from the header
- *
  * @set_scratch_backing_va: Sets VA for scratch backing memory of a VMID.
  * Only used for no cp scheduling mode
  *
@@ -311,8 +297,6 @@ struct kfd2kgd_calls {
 					struct kgd_dev *kgd,
 					uint8_t vmid);
 
-	uint16_t (*get_fw_version)(struct kgd_dev *kgd,
-				enum kgd_engine_type type);
 	void (*set_scratch_backing_va)(struct kgd_dev *kgd,
 				uint64_t va, uint32_t vmid);
 	int (*get_tile_config)(struct kgd_dev *kgd, struct tile_config *config);
diff --git a/drivers/gpu/drm/amd/include/linux/chash.h b/drivers/gpu/drm/amd/include/linux/chash.h
deleted file mode 100644
index 6dc159924ed1..000000000000
--- a/drivers/gpu/drm/amd/include/linux/chash.h
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * Copyright 2017 Advanced Micro Devices, Inc.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
- */
-
-#ifndef _LINUX_CHASH_H
-#define _LINUX_CHASH_H
-
-#include <linux/types.h>
-#include <linux/hash.h>
-#include <linux/bug.h>
-#include <asm/bitsperlong.h>
-
-#if BITS_PER_LONG == 32
-# define _CHASH_LONG_SHIFT 5
-#elif BITS_PER_LONG == 64
-# define _CHASH_LONG_SHIFT 6
-#else
-# error "Unexpected BITS_PER_LONG"
-#endif
-
-struct __chash_table {
-	u8 bits;
-	u8 key_size;
-	unsigned int value_size;
-	u32 size_mask;
-	unsigned long *occup_bitmap, *valid_bitmap;
-	union {
-		u32 *keys32;
-		u64 *keys64;
-	};
-	u8 *values;
-
-#ifdef CONFIG_CHASH_STATS
-	u64 hits, hits_steps, hits_time_ns;
-	u64 miss, miss_steps, miss_time_ns;
-	u64 relocs, reloc_dist;
-#endif
-};
-
-#define __CHASH_BITMAP_SIZE(bits)				\
-	(((1 << (bits)) + BITS_PER_LONG - 1) / BITS_PER_LONG)
-#define __CHASH_ARRAY_SIZE(bits, size)				\
-	((((size) << (bits)) + sizeof(long) - 1) / sizeof(long))
-
-#define __CHASH_DATA_SIZE(bits, key_size, value_size)	\
-	(__CHASH_BITMAP_SIZE(bits) * 2 +		\
-	 __CHASH_ARRAY_SIZE(bits, key_size) +		\
-	 __CHASH_ARRAY_SIZE(bits, value_size))
-
-#define STRUCT_CHASH_TABLE(bits, key_size, value_size)			\
-	struct {							\
-		struct __chash_table table;				\
-		unsigned long data					\
-			[__CHASH_DATA_SIZE(bits, key_size, value_size)];\
-	}
-
-/**
- * struct chash_table - Dynamically allocated closed hash table
- *
- * Use this struct for dynamically allocated hash tables (using
- * chash_table_alloc and chash_table_free), where the size is
- * determined at runtime.
- */
-struct chash_table {
-	struct __chash_table table;
-	unsigned long *data;
-};
-
-/**
- * DECLARE_CHASH_TABLE - macro to declare a closed hash table
- * @table: name of the declared hash table
- * @bts: Table size will be 2^bits entries
- * @key_sz: Size of hash keys in bytes, 4 or 8
- * @val_sz: Size of data values in bytes, can be 0
- *
- * This declares the hash table variable with a static size.
- *
- * The closed hash table stores key-value pairs with low memory and
- * lookup overhead. In operation it performs no dynamic memory
- * management. The data being stored does not require any
- * list_heads. The hash table performs best with small @val_sz and as
- * long as some space (about 50%) is left free in the table. But the
- * table can still work reasonably efficiently even when filled up to
- * about 90%. If bigger data items need to be stored and looked up,
- * store the pointer to it as value in the hash table.
- *
- * @val_sz may be 0. This can be useful when all the stored
- * information is contained in the key itself and the fact that it is
- * in the hash table (or not).
- */
-#define DECLARE_CHASH_TABLE(table, bts, key_sz, val_sz)		\
-	STRUCT_CHASH_TABLE(bts, key_sz, val_sz) table
-
-#ifdef CONFIG_CHASH_STATS
-#define __CHASH_STATS_INIT(prefix),		\
-		prefix.hits = 0,		\
-		prefix.hits_steps = 0,		\
-		prefix.hits_time_ns = 0,	\
-		prefix.miss = 0,		\
-		prefix.miss_steps = 0,		\
-		prefix.miss_time_ns = 0,	\
-		prefix.relocs = 0,		\
-		prefix.reloc_dist = 0
-#else
-#define __CHASH_STATS_INIT(prefix)
-#endif
-
-#define __CHASH_TABLE_INIT(prefix, data, bts, key_sz, val_sz)	\
-	prefix.bits = (bts),					\
-		prefix.key_size = (key_sz),			\
-		prefix.value_size = (val_sz),			\
-		prefix.size_mask = ((1 << bts) - 1),		\
-		prefix.occup_bitmap = &data[0],			\
-		prefix.valid_bitmap = &data			\
-			[__CHASH_BITMAP_SIZE(bts)],		\
-		prefix.keys64 = (u64 *)&data			\
-			[__CHASH_BITMAP_SIZE(bts) * 2],		\
-		prefix.values = (u8 *)&data			\
-			[__CHASH_BITMAP_SIZE(bts) * 2 +		\
-			 __CHASH_ARRAY_SIZE(bts, key_sz)]	\
-		__CHASH_STATS_INIT(prefix)
-
-/**
- * DEFINE_CHASH_TABLE - macro to define and initialize a closed hash table
- * @tbl: name of the declared hash table
- * @bts: Table size will be 2^bits entries
- * @key_sz: Size of hash keys in bytes, 4 or 8
- * @val_sz: Size of data values in bytes, can be 0
- *
- * Note: the macro can be used for global and local hash table variables.
- */
-#define DEFINE_CHASH_TABLE(tbl, bts, key_sz, val_sz)			\
-	DECLARE_CHASH_TABLE(tbl, bts, key_sz, val_sz) = {		\
-		.table = {						\
-			__CHASH_TABLE_INIT(, (tbl).data, bts, key_sz, val_sz) \
-		},							\
-		.data = {0}						\
-	}
-
-/**
- * INIT_CHASH_TABLE - Initialize a hash table declared by DECLARE_CHASH_TABLE
- * @tbl: name of the declared hash table
- * @bts: Table size will be 2^bits entries
- * @key_sz: Size of hash keys in bytes, 4 or 8
- * @val_sz: Size of data values in bytes, can be 0
- */
-#define INIT_CHASH_TABLE(tbl, bts, key_sz, val_sz)			\
-	__CHASH_TABLE_INIT(((tbl).table), (tbl).data, bts, key_sz, val_sz)
-
-int chash_table_alloc(struct chash_table *table, u8 bits, u8 key_size,
-		      unsigned int value_size, gfp_t gfp_mask);
-void chash_table_free(struct chash_table *table);
-
-/**
- * chash_table_dump_stats - Dump statistics of a closed hash table
- * @tbl: Pointer to the table structure
- *
- * Dumps some performance statistics of the table gathered in operation
- * in the kernel log using pr_debug. If CONFIG_DYNAMIC_DEBUG is enabled,
- * user must turn on messages for chash.c (file chash.c +p).
- */
-#ifdef CONFIG_CHASH_STATS
-#define chash_table_dump_stats(tbl) __chash_table_dump_stats(&(*tbl).table)
-
-void __chash_table_dump_stats(struct __chash_table *table);
-#else
-#define chash_table_dump_stats(tbl)
-#endif
-
-/**
- * chash_table_reset_stats - Reset statistics of a closed hash table
- * @tbl: Pointer to the table structure
- */
-#ifdef CONFIG_CHASH_STATS
-#define chash_table_reset_stats(tbl) __chash_table_reset_stats(&(*tbl).table)
-
-static inline void __chash_table_reset_stats(struct __chash_table *table)
-{
-	(void)table __CHASH_STATS_INIT((*table));
-}
-#else
-#define chash_table_reset_stats(tbl)
-#endif
-
-/**
- * chash_table_copy_in - Copy a new value into the hash table
- * @tbl: Pointer to the table structure
- * @key: Key of the entry to add or update
- * @value: Pointer to value to copy, may be NULL
- *
- * If @key already has an entry, its value is replaced. Otherwise a
- * new entry is added. If @value is NULL, the value is left unchanged
- * or uninitialized. Returns 1 if an entry already existed, 0 if a new
- * entry was added or %-ENOMEM if there was no free space in the
- * table.
- */
-#define chash_table_copy_in(tbl, key, value)			\
-	__chash_table_copy_in(&(*tbl).table, key, value)
-
-int __chash_table_copy_in(struct __chash_table *table, u64 key,
-			  const void *value);
-
-/**
- * chash_table_copy_out - Copy a value out of the hash table
- * @tbl: Pointer to the table structure
- * @key: Key of the entry to find
- * @value: Pointer to value to copy, may be NULL
- *
- * If @value is not NULL and the table has a non-0 value_size, the
- * value at @key is copied to @value. Returns the slot index of the
- * entry or %-EINVAL if @key was not found.
- */
-#define chash_table_copy_out(tbl, key, value)			\
-	__chash_table_copy_out(&(*tbl).table, key, value, false)
-
-int __chash_table_copy_out(struct __chash_table *table, u64 key,
-			   void *value, bool remove);
-
-/**
- * chash_table_remove - Remove an entry from the hash table
- * @tbl: Pointer to the table structure
- * @key: Key of the entry to find
- * @value: Pointer to value to copy, may be NULL
- *
- * If @value is not NULL and the table has a non-0 value_size, the
- * value at @key is copied to @value. The entry is removed from the
- * table. Returns the slot index of the removed entry or %-EINVAL if
- * @key was not found.
- */
-#define chash_table_remove(tbl, key, value)			\
-	__chash_table_copy_out(&(*tbl).table, key, value, true)
-
-/*
- * Low level iterator API used internally by the above functions.
- */
-struct chash_iter {
-	struct __chash_table *table;
-	unsigned long mask;
-	int slot;
-};
-
-/**
- * CHASH_ITER_INIT - Initialize a hash table iterator
- * @tbl: Pointer to hash table to iterate over
- * @s: Initial slot number
- */
-#define CHASH_ITER_INIT(table, s) {			\
-		table,					\
-		1UL << ((s) & (BITS_PER_LONG - 1)),	\
-		s					\
-	}
-/**
- * CHASH_ITER_SET - Set hash table iterator to new slot
- * @iter: Iterator
- * @s: Slot number
- */
-#define CHASH_ITER_SET(iter, s)					\
-	(iter).mask = 1UL << ((s) & (BITS_PER_LONG - 1)),	\
-	(iter).slot = (s)
-/**
- * CHASH_ITER_INC - Increment hash table iterator
- * @table: Hash table to iterate over
- *
- * Wraps around at the end.
- */
-#define CHASH_ITER_INC(iter) do {					\
-		(iter).mask = (iter).mask << 1 |			\
-			(iter).mask >> (BITS_PER_LONG - 1);		\
-		(iter).slot = ((iter).slot + 1) & (iter).table->size_mask; \
-	} while (0)
-
-static inline bool chash_iter_is_valid(const struct chash_iter iter)
-{
-	BUG_ON((unsigned)iter.slot >= (1 << iter.table->bits));
-	return !!(iter.table->valid_bitmap[iter.slot >> _CHASH_LONG_SHIFT] &
-		  iter.mask);
-}
-static inline bool chash_iter_is_empty(const struct chash_iter iter)
-{
-	BUG_ON((unsigned)iter.slot >= (1 << iter.table->bits));
-	return !(iter.table->occup_bitmap[iter.slot >> _CHASH_LONG_SHIFT] &
-		 iter.mask);
-}
-
-static inline void chash_iter_set_valid(const struct chash_iter iter)
-{
-	BUG_ON((unsigned)iter.slot >= (1 << iter.table->bits));
-	iter.table->valid_bitmap[iter.slot >> _CHASH_LONG_SHIFT] |= iter.mask;
-	iter.table->occup_bitmap[iter.slot >> _CHASH_LONG_SHIFT] |= iter.mask;
-}
-static inline void chash_iter_set_invalid(const struct chash_iter iter)
-{
-	BUG_ON((unsigned)iter.slot >= (1 << iter.table->bits));
-	iter.table->valid_bitmap[iter.slot >> _CHASH_LONG_SHIFT] &= ~iter.mask;
-}
-static inline void chash_iter_set_empty(const struct chash_iter iter)
-{
-	BUG_ON((unsigned)iter.slot >= (1 << iter.table->bits));
-	iter.table->occup_bitmap[iter.slot >> _CHASH_LONG_SHIFT] &= ~iter.mask;
-}
-
-static inline u32 chash_iter_key32(const struct chash_iter iter)
-{
-	BUG_ON(iter.table->key_size != 4);
-	BUG_ON((unsigned)iter.slot >= (1 << iter.table->bits));
-	return iter.table->keys32[iter.slot];
-}
-static inline u64 chash_iter_key64(const struct chash_iter iter)
-{
-	BUG_ON(iter.table->key_size != 8);
-	BUG_ON((unsigned)iter.slot >= (1 << iter.table->bits));
-	return iter.table->keys64[iter.slot];
-}
-static inline u64 chash_iter_key(const struct chash_iter iter)
-{
-	BUG_ON((unsigned)iter.slot >= (1 << iter.table->bits));
-	return (iter.table->key_size == 4) ?
-		iter.table->keys32[iter.slot] : iter.table->keys64[iter.slot];
-}
-
-static inline u32 chash_iter_hash32(const struct chash_iter iter)
-{
-	BUG_ON(iter.table->key_size != 4);
-	return hash_32(chash_iter_key32(iter), iter.table->bits);
-}
-
-static inline u32 chash_iter_hash64(const struct chash_iter iter)
-{
-	BUG_ON(iter.table->key_size != 8);
-	return hash_64(chash_iter_key64(iter), iter.table->bits);
-}
-
-static inline u32 chash_iter_hash(const struct chash_iter iter)
-{
-	return (iter.table->key_size == 4) ?
-		hash_32(chash_iter_key32(iter), iter.table->bits) :
-		hash_64(chash_iter_key64(iter), iter.table->bits);
-}
-
-static inline void *chash_iter_value(const struct chash_iter iter)
-{
-	BUG_ON((unsigned)iter.slot >= (1 << iter.table->bits));
-	return iter.table->values +
-		((unsigned long)iter.slot * iter.table->value_size);
-}
-
-#endif /* _LINUX_CHASH_H */