drm/amd/display: Support HW cursor 180 rot for any number of pipe splits

[Why]
For the HW cursor, its current position in the pipe_ctx->stream struct is
not affected by the 180 rotation, i. e. the top left corner is still at
0,0. However, the DPP & HUBP set_cursor_position functions require rotated
position.

The current approach is hard-coded for ODM 2:1, thus it's failing for
ODM 4:1, resulting in a double cursor.

[How]
Instead of calculating the new cursor position relatively to the
viewports, we calculate it using a viewavable clip_rect of each plane.

The clip_rects are first offset and scaled to the same space as the
src_rect, i. e. Stream space -> Plane space.

In case of a pipe split, which divides the plane into 2 or more viewports,
the clip_rect is the union of all the viewports of the given plane.

With the assumption that the viewports in HUBP's set_cursor_position are
in the Plane space as well, it should produce a correct cursor position
for any number of pipe splits.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1 files changed, 27 insertions, 46 deletions

diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c
index d633033c98f2..506c3bbbf221 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn10/dcn10_hwseq.c
@@ -3663,6 +3663,8 @@ void dcn10_set_cursor_position(struct pipe_ctx *pipe_ctx)
 	int y_plane = pipe_ctx->plane_state->dst_rect.y;
 	int x_pos = pos_cpy.x;
 	int y_pos = pos_cpy.y;
+	int clip_x = pipe_ctx->plane_state->clip_rect.x;
+	int clip_width = pipe_ctx->plane_state->clip_rect.width;
 
 	if ((pipe_ctx->top_pipe != NULL) || (pipe_ctx->bottom_pipe != NULL)) {
 		if ((pipe_ctx->plane_state->src_rect.width != pipe_ctx->plane_res.scl_data.viewport.width) ||
@@ -3681,7 +3683,7 @@ void dcn10_set_cursor_position(struct pipe_ctx *pipe_ctx)
 	 */
 
 	/**
-	 * Translate cursor from stream space to plane space.
+	 * Translate cursor and clip offset from stream space to plane space.
 	 *
 	 * If the cursor is scaled then we need to scale the position
 	 * to be in the approximately correct place. We can't do anything
@@ -3698,6 +3700,10 @@ void dcn10_set_cursor_position(struct pipe_ctx *pipe_ctx)
 				pipe_ctx->plane_state->dst_rect.width;
 		y_pos = (y_pos - y_plane) * pipe_ctx->plane_state->src_rect.height /
 				pipe_ctx->plane_state->dst_rect.height;
+		clip_x = (clip_x - x_plane) * pipe_ctx->plane_state->src_rect.width /
+				pipe_ctx->plane_state->dst_rect.width;
+		clip_width = clip_width * pipe_ctx->plane_state->src_rect.width /
+				pipe_ctx->plane_state->dst_rect.width;
 	}
 
 	/**
@@ -3744,30 +3750,18 @@ void dcn10_set_cursor_position(struct pipe_ctx *pipe_ctx)
 
 
 	if (param.rotation == ROTATION_ANGLE_0) {
-		int viewport_width =
-			pipe_ctx->plane_res.scl_data.viewport.width;
-		int viewport_x =
-			pipe_ctx->plane_res.scl_data.viewport.x;
 
 		if (param.mirror) {
-			if (pipe_split_on || odm_combine_on) {
-				if (pos_cpy.x >= viewport_width + viewport_x) {
-					pos_cpy.x = 2 * viewport_width
-							- pos_cpy.x + 2 * viewport_x;
-				} else {
-					uint32_t temp_x = pos_cpy.x;
-
-					pos_cpy.x = 2 * viewport_x - pos_cpy.x;
-					if (temp_x >= viewport_x +
-						(int)hubp->curs_attr.width || pos_cpy.x
-						<= (int)hubp->curs_attr.width +
-						pipe_ctx->plane_state->src_rect.x) {
-						pos_cpy.x = 2 * viewport_width - temp_x;
-					}
-				}
-			} else {
-				pos_cpy.x = viewport_width - pos_cpy.x + 2 * viewport_x;
-			}
+			/*
+			 * The plane is split into multiple viewports.
+			 * The combination of all viewports span the
+			 * entirety of the clip rect.
+			 *
+			 * For no pipe_split, viewport_width is represents
+			 * the full width of the clip_rect, so we can just
+			 * mirror it.
+			 */
+			pos_cpy.x = clip_width - pos_cpy.x + 2 * clip_x;
 		}
 	}
 	// Swap axis and mirror horizontally
@@ -3837,30 +3831,17 @@ void dcn10_set_cursor_position(struct pipe_ctx *pipe_ctx)
 	}
 	// Mirror horizontally and vertically
 	else if (param.rotation == ROTATION_ANGLE_180) {
-		int viewport_width =
-			pipe_ctx->plane_res.scl_data.viewport.width;
-		int viewport_x =
-			pipe_ctx->plane_res.scl_data.viewport.x;
-
 		if (!param.mirror) {
-			if (pipe_split_on || odm_combine_on) {
-				if (pos_cpy.x >= viewport_width + viewport_x) {
-					pos_cpy.x = 2 * viewport_width
-							- pos_cpy.x + 2 * viewport_x;
-				} else {
-					uint32_t temp_x = pos_cpy.x;
-
-					pos_cpy.x = 2 * viewport_x - pos_cpy.x;
-					if (temp_x >= viewport_x +
-						(int)hubp->curs_attr.width || pos_cpy.x
-						<= (int)hubp->curs_attr.width +
-						pipe_ctx->plane_state->src_rect.x) {
-						pos_cpy.x = temp_x + viewport_width;
-					}
-				}
-			} else {
-				pos_cpy.x = viewport_width - pos_cpy.x + 2 * viewport_x;
-			}
+			/*
+			 * The plane is split into multiple viewports.
+			 * The combination of all viewports span the
+			 * entirety of the clip rect.
+			 *
+			 * For no pipe_split, viewport_width is represents
+			 * the full width of the clip_rect, so we can just
+			 * mirror it.
+			 */
+			pos_cpy.x = clip_width - pos_cpy.x + 2 * clip_x;
 		}
 
 		/**