Merge tag 'mfd-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Support & Features:

   - Add extensive support for the Analog Devices ADP5589 I/O expander,
     including core MFD, GPIO, PWM, and a new keypad matrix input
     driver. This also adds support for handling various events
     including GPI, keypad, reset and unlock ev ents

   - Add support for the TI TPS652G1 PMIC, a stripped-down version of
     the TPS65224, including core MFD, PFSM, pinctrl, and GPIO support

   - Add support for the Apple Silicon System Management Controller
     (SMC), including the core MFD driver which handles the RTKit-based
     protocol, a new GPIO driver for PMU GPIOs, and a new
     reboot/power-off driver.

  Improvements & Fixes:

   - Dynamically add ADP5585 sub-devices based on device tree properties

   - Move ADP5585 oscillator control from the child PWM driver to the
     main MFD driver to better handle shared resources

   - Add support for a hardware reset pin and VDD regulator to the
     ADP5585 driver

   - Update the TPS65219 MFD cell's GPIO compatible string for the
     TPS65214 to reflect hardware capabilities correctly

   - Separate the ChromeOS EC charge-control probing from the USB-PD
     subsystem, allowing it to probe independently based on the
     dedicated EC_FEATURE_CHARGER

   - Fix an interrupt naming typo in the MT6370 driver

   - Fix RK806 PMIC reset behavior by allowing the reset mode to be
     customized via a new device tree property

   - Fix AXP20X regulator cell ID conflicts for secondary PMICs on
     boards without an IRQ line connected

   - Fix MT6397 keypad sub-device creation to use specific names instead
     of a generic one, ensuring correct driver binding

   - Fix a build warning in the stm32-timers driver by adding a missing
     include for export.h.

  Cleanups & Refactoring:

   - Refactor the ADP5585 driver to simplify how regmap defaults are
     handled, making it easier to add new chip variants

   - Introduce per-chip register map structures for the ADP5585/ADP5589
     family to handle differences between the devices

   - Convert several drivers to use dev_fwnode() instead of
     of_fwnode_handle()

   - Make various static structures const in the cs40l50, rohm-bd71828,
     tps65219, and twl6040 drivers

   - Remove redundant pm_runtime_mark_last_busy() calls from several
     drivers

   - Alphabetize Kconfig entries for Cirrus Logic and Maxim drivers

   - Remove unused fields from the 'tps65219' struct

   - Update several MFD-related headers to follow the 'Include What You
     Use' (IWYU) principle.

  Removals:

   - Remove the old, platform-data-based adp5589-keys input driver,
     which is now superseded by the new MFD-based adp5585-keys driver

   - Remove the unused twl6030_mmc_card_detect() functions and
     associated header declarations

   - Remove the now unused pcf50633/core.h header file

   - Remove the fsl,imx8qxp-csr device tree binding, which was being
     used incorrectly.

  Device Tree Bindings Updates:

   - Add support for the Analog Devices ADP5589 I/O expander to the
     adi,adp5585.yaml binding

   - Add new properties to the adi,adp5585.yaml binding for input
     events, including keypad pins, unlock events, and reset events

   - Add a reset-gpios property to the adi,adp5585.yaml binding

   - Add the TI TPS652G1 PMIC to the ti,tps6594.yaml binding

   - Add new bindings for the Apple Mac System Management Controller
     (SMC) and its sub-devices: apple,smc.yaml, apple,smc-gpio.yaml, and
     apple,smc-reboot.yaml

   - Convert the Freescale MXS LRADC binding (mxs-lradc) to YAML schema
     format

   - Convert and combine the NXP LPC1850 CREG, DMAMUX, and USB OTG PHY
     bindings into a single YAML schema file

   - Convert the TI TPS65910 binding to YAML schema format

   - Add a comment to the samsung,s2mps11.yaml binding to clarify the
     use of 'oneOf' for interrupt properties

   - Add the rockchip,reset-mode property to the rockchip,rk806.yaml
     binding to allow customization of the PMIC's reset behavior"

* tag 'mfd-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (28 commits)
  mfd: dt-bindings: Convert TPS65910 to DT schema
  mfd: Minor Cirrus/Maxim Kconfig order fixes
  mfd: Remove redundant pm_runtime_mark_last_busy() calls
  mfd: mt6397: Do not use generic name for keypad sub-devices
  mfd: axp20x: Set explicit ID for regulator cell if no IRQ line is present
  mfd: mt6370: Fix the interrupt naming typo
  mfd: rk8xx-core: Allow to customize RK806 reset mode
  dt-bindings: mfd: rk806: Allow to customize PMIC reset mode
  mfd: syscon: atmel-smc: Don't use "proxy" headers
  mfd: madera: Don't use "proxy" headers
  mfd: wm8350-core: Don't use "proxy" headers
  dt-bindings: mfd: samsung,s2mps11: Add comment about interrupts properties
  mfd: davinci_voicecodec: Don't use "proxy" headers
  mfd: pcf50633: Remove the header file core.h
  mfd: tps65219: Remove another unused field from 'struct tps65219'
  mfd: tps65219: Remove an unused field from 'struct tps65219'
  mfd: tps65219: Constify struct regmap_irq_sub_irq_map and tps65219_chip_data
  mfd: rohm-bd71828: Constify some structures
  dt-bindings: mfd: fsl,imx8qxp-csr: Remove binding documentation
  mfd: axp20x: Set explicit ID for AXP313 regulator
  ...

8 files changed, 21 insertions, 265 deletions

diff --git a/include/linux/mfd/davinci_voicecodec.h b/include/linux/mfd/davinci_voicecodec.h
index 556375b91316..9acd703dd5ca 100644
--- a/include/linux/mfd/davinci_voicecodec.h
+++ b/include/linux/mfd/davinci_voicecodec.h
@@ -10,11 +10,13 @@
 #ifndef __LINUX_MFD_DAVINCI_VOICECODEC_H_
 #define __LINUX_MFD_DAVINCI_VOICECODEC_H_
 
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
+#include <linux/bits.h>
 #include <linux/mfd/core.h>
-#include <linux/platform_data/edma.h>
+#include <linux/types.h>
 
+struct clk;
+struct device;
+struct platform_device;
 struct regmap;
 
 /*
diff --git a/include/linux/mfd/madera/pdata.h b/include/linux/mfd/madera/pdata.h
index 32e3470708ed..7e84738cbb20 100644
--- a/include/linux/mfd/madera/pdata.h
+++ b/include/linux/mfd/madera/pdata.h
@@ -8,10 +8,11 @@
 #ifndef MADERA_PDATA_H
 #define MADERA_PDATA_H
 
-#include <linux/kernel.h>
 #include <linux/regulator/arizona-ldo1.h>
 #include <linux/regulator/arizona-micsupp.h>
 #include <linux/regulator/machine.h>
+#include <linux/types.h>
+
 #include <sound/madera-pdata.h>
 
 #define MADERA_MAX_MICBIAS		4
diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h
deleted file mode 100644
index 42d2b0e4884e..000000000000
--- a/include/linux/mfd/pcf50633/core.h
+++ /dev/null
@@ -1,229 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * core.h  -- Core driver for NXP PCF50633
- *
- * (C) 2006-2008 by Openmoko, Inc.
- * All rights reserved.
- */
-
-#ifndef __LINUX_MFD_PCF50633_CORE_H
-#define __LINUX_MFD_PCF50633_CORE_H
-
-#include <linux/i2c.h>
-#include <linux/workqueue.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/machine.h>
-#include <linux/pm.h>
-#include <linux/power_supply.h>
-
-struct pcf50633;
-struct regmap;
-
-#define PCF50633_NUM_REGULATORS	11
-
-struct pcf50633_platform_data {
-	struct regulator_init_data reg_init_data[PCF50633_NUM_REGULATORS];
-
-	char **batteries;
-	int num_batteries;
-
-	/*
-	 * Should be set accordingly to the reference resistor used, see
-	 * I_{ch(ref)} charger reference current in the pcf50633 User
-	 * Manual.
-	 */
-	int charger_reference_current_ma;
-
-	/* Callbacks */
-	void (*probe_done)(struct pcf50633 *);
-	void (*mbc_event_callback)(struct pcf50633 *, int);
-	void (*regulator_registered)(struct pcf50633 *, int);
-	void (*force_shutdown)(struct pcf50633 *);
-
-	u8 resumers[5];
-};
-
-struct pcf50633_irq {
-	void (*handler) (int, void *);
-	void *data;
-};
-
-int pcf50633_register_irq(struct pcf50633 *pcf, int irq,
-			void (*handler) (int, void *), void *data);
-int pcf50633_free_irq(struct pcf50633 *pcf, int irq);
-
-int pcf50633_irq_mask(struct pcf50633 *pcf, int irq);
-int pcf50633_irq_unmask(struct pcf50633 *pcf, int irq);
-int pcf50633_irq_mask_get(struct pcf50633 *pcf, int irq);
-
-int pcf50633_read_block(struct pcf50633 *, u8 reg,
-					int nr_regs, u8 *data);
-int pcf50633_write_block(struct pcf50633 *pcf, u8 reg,
-					int nr_regs, u8 *data);
-u8 pcf50633_reg_read(struct pcf50633 *, u8 reg);
-int pcf50633_reg_write(struct pcf50633 *pcf, u8 reg, u8 val);
-
-int pcf50633_reg_set_bit_mask(struct pcf50633 *pcf, u8 reg, u8 mask, u8 val);
-int pcf50633_reg_clear_bits(struct pcf50633 *pcf, u8 reg, u8 bits);
-
-/* Interrupt registers */
-
-#define PCF50633_REG_INT1	0x02
-#define PCF50633_REG_INT2	0x03
-#define PCF50633_REG_INT3	0x04
-#define PCF50633_REG_INT4	0x05
-#define PCF50633_REG_INT5	0x06
-
-#define PCF50633_REG_INT1M	0x07
-#define PCF50633_REG_INT2M	0x08
-#define PCF50633_REG_INT3M	0x09
-#define PCF50633_REG_INT4M	0x0a
-#define PCF50633_REG_INT5M	0x0b
-
-enum {
-	/* Chip IRQs */
-	PCF50633_IRQ_ADPINS,
-	PCF50633_IRQ_ADPREM,
-	PCF50633_IRQ_USBINS,
-	PCF50633_IRQ_USBREM,
-	PCF50633_IRQ_RESERVED1,
-	PCF50633_IRQ_RESERVED2,
-	PCF50633_IRQ_ALARM,
-	PCF50633_IRQ_SECOND,
-	PCF50633_IRQ_ONKEYR,
-	PCF50633_IRQ_ONKEYF,
-	PCF50633_IRQ_EXTON1R,
-	PCF50633_IRQ_EXTON1F,
-	PCF50633_IRQ_EXTON2R,
-	PCF50633_IRQ_EXTON2F,
-	PCF50633_IRQ_EXTON3R,
-	PCF50633_IRQ_EXTON3F,
-	PCF50633_IRQ_BATFULL,
-	PCF50633_IRQ_CHGHALT,
-	PCF50633_IRQ_THLIMON,
-	PCF50633_IRQ_THLIMOFF,
-	PCF50633_IRQ_USBLIMON,
-	PCF50633_IRQ_USBLIMOFF,
-	PCF50633_IRQ_ADCRDY,
-	PCF50633_IRQ_ONKEY1S,
-	PCF50633_IRQ_LOWSYS,
-	PCF50633_IRQ_LOWBAT,
-	PCF50633_IRQ_HIGHTMP,
-	PCF50633_IRQ_AUTOPWRFAIL,
-	PCF50633_IRQ_DWN1PWRFAIL,
-	PCF50633_IRQ_DWN2PWRFAIL,
-	PCF50633_IRQ_LEDPWRFAIL,
-	PCF50633_IRQ_LEDOVP,
-	PCF50633_IRQ_LDO1PWRFAIL,
-	PCF50633_IRQ_LDO2PWRFAIL,
-	PCF50633_IRQ_LDO3PWRFAIL,
-	PCF50633_IRQ_LDO4PWRFAIL,
-	PCF50633_IRQ_LDO5PWRFAIL,
-	PCF50633_IRQ_LDO6PWRFAIL,
-	PCF50633_IRQ_HCLDOPWRFAIL,
-	PCF50633_IRQ_HCLDOOVL,
-
-	/* Always last */
-	PCF50633_NUM_IRQ,
-};
-
-struct pcf50633 {
-	struct device *dev;
-	struct regmap *regmap;
-
-	struct pcf50633_platform_data *pdata;
-	int irq;
-	struct pcf50633_irq irq_handler[PCF50633_NUM_IRQ];
-	struct work_struct irq_work;
-	struct workqueue_struct *work_queue;
-	struct mutex lock;
-
-	u8 mask_regs[5];
-
-	u8 suspend_irq_masks[5];
-	u8 resume_reason[5];
-	int is_suspended;
-
-	int onkey1s_held;
-
-	struct platform_device *rtc_pdev;
-	struct platform_device *mbc_pdev;
-	struct platform_device *adc_pdev;
-	struct platform_device *input_pdev;
-	struct platform_device *bl_pdev;
-	struct platform_device *regulator_pdev[PCF50633_NUM_REGULATORS];
-};
-
-enum pcf50633_reg_int1 {
-	PCF50633_INT1_ADPINS	= 0x01,	/* Adapter inserted */
-	PCF50633_INT1_ADPREM	= 0x02,	/* Adapter removed */
-	PCF50633_INT1_USBINS	= 0x04,	/* USB inserted */
-	PCF50633_INT1_USBREM	= 0x08,	/* USB removed */
-	/* reserved */
-	PCF50633_INT1_ALARM	= 0x40, /* RTC alarm time is reached */
-	PCF50633_INT1_SECOND	= 0x80,	/* RTC periodic second interrupt */
-};
-
-enum pcf50633_reg_int2 {
-	PCF50633_INT2_ONKEYR	= 0x01, /* ONKEY rising edge */
-	PCF50633_INT2_ONKEYF	= 0x02, /* ONKEY falling edge */
-	PCF50633_INT2_EXTON1R	= 0x04, /* EXTON1 rising edge */
-	PCF50633_INT2_EXTON1F	= 0x08, /* EXTON1 falling edge */
-	PCF50633_INT2_EXTON2R	= 0x10, /* EXTON2 rising edge */
-	PCF50633_INT2_EXTON2F	= 0x20, /* EXTON2 falling edge */
-	PCF50633_INT2_EXTON3R	= 0x40, /* EXTON3 rising edge */
-	PCF50633_INT2_EXTON3F	= 0x80, /* EXTON3 falling edge */
-};
-
-enum pcf50633_reg_int3 {
-	PCF50633_INT3_BATFULL	= 0x01, /* Battery full */
-	PCF50633_INT3_CHGHALT	= 0x02,	/* Charger halt */
-	PCF50633_INT3_THLIMON	= 0x04,
-	PCF50633_INT3_THLIMOFF	= 0x08,
-	PCF50633_INT3_USBLIMON	= 0x10,
-	PCF50633_INT3_USBLIMOFF	= 0x20,
-	PCF50633_INT3_ADCRDY	= 0x40, /* ADC result ready */
-	PCF50633_INT3_ONKEY1S	= 0x80,	/* ONKEY pressed 1 second */
-};
-
-enum pcf50633_reg_int4 {
-	PCF50633_INT4_LOWSYS		= 0x01,
-	PCF50633_INT4_LOWBAT		= 0x02,
-	PCF50633_INT4_HIGHTMP		= 0x04,
-	PCF50633_INT4_AUTOPWRFAIL	= 0x08,
-	PCF50633_INT4_DWN1PWRFAIL	= 0x10,
-	PCF50633_INT4_DWN2PWRFAIL	= 0x20,
-	PCF50633_INT4_LEDPWRFAIL	= 0x40,
-	PCF50633_INT4_LEDOVP		= 0x80,
-};
-
-enum pcf50633_reg_int5 {
-	PCF50633_INT5_LDO1PWRFAIL	= 0x01,
-	PCF50633_INT5_LDO2PWRFAIL	= 0x02,
-	PCF50633_INT5_LDO3PWRFAIL	= 0x04,
-	PCF50633_INT5_LDO4PWRFAIL	= 0x08,
-	PCF50633_INT5_LDO5PWRFAIL	= 0x10,
-	PCF50633_INT5_LDO6PWRFAIL	= 0x20,
-	PCF50633_INT5_HCLDOPWRFAIL	= 0x40,
-	PCF50633_INT5_HCLDOOVL		= 0x80,
-};
-
-/* misc. registers */
-#define PCF50633_REG_OOCSHDWN	0x0c
-
-/* LED registers */
-#define PCF50633_REG_LEDOUT 0x28
-#define PCF50633_REG_LEDENA 0x29
-#define PCF50633_REG_LEDCTL 0x2a
-#define PCF50633_REG_LEDDIM 0x2b
-
-static inline struct pcf50633 *dev_to_pcf50633(struct device *dev)
-{
-	return dev_get_drvdata(dev);
-}
-
-int pcf50633_irq_init(struct pcf50633 *pcf, int irq);
-void pcf50633_irq_free(struct pcf50633 *pcf);
-extern const struct dev_pm_ops pcf50633_pm;
-
-#endif
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index 69cbea78b430..28170ee08898 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -812,6 +812,8 @@ enum rk806_pin_dr_sel {
 #define RK806_INT_POL_H			BIT(1)
 #define RK806_INT_POL_L			0
 
+/* SYS_CFG3 */
+#define RK806_RST_FUN_MSK		GENMASK(7, 6)
 #define RK806_SLAVE_RESTART_FUN_MSK	BIT(1)
 #define RK806_SLAVE_RESTART_FUN_EN	BIT(1)
 #define RK806_SLAVE_RESTART_FUN_OFF	0
diff --git a/include/linux/mfd/syscon/atmel-smc.h b/include/linux/mfd/syscon/atmel-smc.h
index e9e24f4c4578..9b9119c742a2 100644
--- a/include/linux/mfd/syscon/atmel-smc.h
+++ b/include/linux/mfd/syscon/atmel-smc.h
@@ -11,9 +11,11 @@
 #ifndef _LINUX_MFD_SYSCON_ATMEL_SMC_H_
 #define _LINUX_MFD_SYSCON_ATMEL_SMC_H_
 
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/regmap.h>
+#include <linux/bits.h>
+#include <linux/types.h>
+
+struct device_node;
+struct regmap;
 
 #define ATMEL_SMC_SETUP(cs)			(((cs) * 0x10))
 #define ATMEL_HSMC_SETUP(layout, cs)		\
diff --git a/include/linux/mfd/tps65219.h b/include/linux/mfd/tps65219.h
index 3e8d29189267..55234e771ba7 100644
--- a/include/linux/mfd/tps65219.h
+++ b/include/linux/mfd/tps65219.h
@@ -10,7 +10,6 @@
 #define MFD_TPS65219_H
 
 #include <linux/bitops.h>
-#include <linux/notifier.h>
 #include <linux/regmap.h>
 #include <linux/regulator/driver.h>
 
@@ -438,17 +437,13 @@ enum tps65219_irqs {
  *
  * @dev: MFD device
  * @regmap: Regmap for accessing the device registers
- * @chip_id: Chip ID
  * @irq_data: Regmap irq data used for the irq chip
- * @nb: notifier block for the restart handler
  */
 struct tps65219 {
 	struct device *dev;
 	struct regmap *regmap;
 
-	unsigned int chip_id;
 	struct regmap_irq_chip_data *irq_data;
-	struct notifier_block nb;
 };
 
 #endif /* MFD_TPS65219_H */
diff --git a/include/linux/mfd/twl.h b/include/linux/mfd/twl.h
index 85dc406173db..b31e07fa4d51 100644
--- a/include/linux/mfd/twl.h
+++ b/include/linux/mfd/twl.h
@@ -205,27 +205,6 @@ int twl_get_hfclk_rate(void);
 int twl6030_interrupt_unmask(u8 bit_mask, u8 offset);
 int twl6030_interrupt_mask(u8 bit_mask, u8 offset);
 
-/* Card detect Configuration for MMC1 Controller on OMAP4 */
-#ifdef CONFIG_TWL4030_CORE
-int twl6030_mmc_card_detect_config(void);
-#else
-static inline int twl6030_mmc_card_detect_config(void)
-{
-	pr_debug("twl6030_mmc_card_detect_config not supported\n");
-	return 0;
-}
-#endif
-
-/* MMC1 Controller on OMAP4 uses Phoenix irq for Card detect */
-#ifdef CONFIG_TWL4030_CORE
-int twl6030_mmc_card_detect(struct device *dev, int slot);
-#else
-static inline int twl6030_mmc_card_detect(struct device *dev, int slot)
-{
-	pr_debug("Call back twl6030_mmc_card_detect not supported\n");
-	return -EIO;
-}
-#endif
 /*----------------------------------------------------------------------*/
 
 /*
diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h
index a3241e4d7548..5f70d3b5d1b1 100644
--- a/include/linux/mfd/wm8350/core.h
+++ b/include/linux/mfd/wm8350/core.h
@@ -8,11 +8,12 @@
 #ifndef __LINUX_MFD_WM8350_CORE_H_
 #define __LINUX_MFD_WM8350_CORE_H_
 
-#include <linux/kernel.h>
-#include <linux/mutex.h>
-#include <linux/interrupt.h>
 #include <linux/completion.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
 #include <linux/regmap.h>
+#include <linux/types.h>
 
 #include <linux/mfd/wm8350/audio.h>
 #include <linux/mfd/wm8350/gpio.h>
@@ -21,6 +22,9 @@
 #include <linux/mfd/wm8350/supply.h>
 #include <linux/mfd/wm8350/wdt.h>
 
+struct device;
+struct platform_device;
+
 /*
  * Register values.
  */