aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/bin
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@linaro.org>2013-09-09 16:54:32 +0200
committerLinus Walleij <linus.walleij@linaro.org>2013-09-20 23:05:10 +0200
commite3f94b385748c10b735f392b69f39f33f02ca3a5 (patch)
tree44bf587becb3fa0c228e5c3ccddf1efb3e7a11d4 /tools/perf/scripts/python/bin
parentARM: plat-iop: instantiate GPIO from platform device (diff)
downloadlinux-e3f94b385748c10b735f392b69f39f33f02ca3a5.tar.gz
linux-e3f94b385748c10b735f392b69f39f33f02ca3a5.zip
gpio: iop: use readl/writel accessors
Use the standard 32bit I/O accessors instead of just assigning addresses. Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mikael Pettersson <mikpe@it.uu.se> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'tools/perf/scripts/python/bin')
0 files changed, 0 insertions, 0 deletions
generated by cgit v1.2.3 (git 2.39.1) at 2026-02-03 01:37:23 +0000
d> Ralink SoC RT3883 has already 'xtal' defined as a base clock so there is no need to redefine it again in fixed clocks section. Hence, remove the duplicate one from there. Fixes: d34db686a3d7 ("clk: ralink: mtmips: fix clocks probe order in oldest ralink SoCs") Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20250108093636.265033-1-sergio.paracuellos@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> 2025-01-13clk: ep93xx: make const read-only arrays staticColin Ian King1-3/+3 Don't populate the const read-only arrays on the stack at run time, instead make them static. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20250112213947.8524-1-colin.i.king@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> 2025-01-13clk: lmk04832: make read-only const arrays staticColin Ian King1-2/+2 Don't populate the read-only const arrays pll2_p and dclk_div_adj on the stack at run time, instead make them static. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20240912134707.590224-1-colin.i.king@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> 2025-01-13clk: sunxi-ng: h616: Reparent CPU clock during frequency changesAndre Przywara1-2/+26 The H616 user manual recommends to re-parent the CPU clock during frequency changes of the PLL, and recommends PLL_PERI0(1X), which runs at 600 MHz. Also it asks to disable and then re-enable the PLL lock bit, after the factor changes have been applied. Add clock notifiers for the PLL and the CPU mux clock, using the existing notifier callbacks, and tell them to use mux 4 (the PLL_PERI0(1X) source), and bit 29 (the LOCK_ENABLE) bit. The existing code already follows the correct algorithms. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20241025105620.1891596-1-andre.przywara@arm.com Tested-by: Evgeny Boger <boger@wirenboard.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> 2025-01-07clk: qcom: Select CLK_X1E80100_GCC in config CLK_X1P42100_GPUCCLukas Bulwahn1-1/+1 Commit 99c21c7ca642 ("clk: qcom: Add X1P42100 GPUCC driver") adds the config definition CLK_X1P42100_GPUCC. This config definition selects the non-existing config CLK_X1E8010_GCC. Note that the config for the X1E80100 Global Clock Controller is CLK_X1E80100_GCC. Assuming this was just a minor typo in the number, i.e., 8010 instead of 80100, change the definition to select the existing config CLK_X1E80100_GCC, similarly to the definitions for three configs CLK_X1E80100_{CAMCC,DISPCC,GPUCC}. Fixes: 99c21c7ca642 ("clk: qcom: Add X1P42100 GPUCC driver") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com> Link: https://lore.kernel.org/r/20250107104728.23098-1-lukas.bulwahn@redhat.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> 2025-01-07dt-bindings: clock: move qcom,x1e80100-camcc to its own fileBryan O'Donoghue2-2/+74 Add an x1e80100 camcc binding. x1e80100 has two power-domain parents unlike other similar camcc controllers. Differentiate the new structure into a unique camcc definition. Other similar camcc controller setups can then be easily added to this one. Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20250102-b4-linux-next-24-11-18-dtsi-x1e80100-camss-v3-2-cb66d55d20cc@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> 2025-01-07clk: qcom: smd-rpm: Add clocks for MSM8940Daniil Titov1-0/+29 MSM8940 has mostly the same rpm clocks as MSM8953, but lacks RF_CLK3. Signed-off-by: Daniil Titov <daniilt971@gmail.com> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Link: https://lore.kernel.org/r/20241231-rpmcc-v1-4-1212df9b2042@mainlining.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> 2025-01-07dt-bindings: clock: qcom,rpmcc: Add MSM8940 compatibleDaniil Titov1-0/+2 Document the qcom,rpmcc-msm8940 compatible. Signed-off-by: Daniil Titov <daniilt971@gmail.com> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20241231-rpmcc-v1-3-1212df9b2042@mainlining.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> 2025-01-07clk: qcom: smd-rpm: Add clocks for MSM8937Daniil Titov1-0/+27 MSM8937 has mostly the same rpm clocks as MSM8953, but lacks RF_CLK3 and IPA_CLK. Signed-off-by: Daniil Titov <daniilt971@gmail.com> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Link: https://lore.kernel.org/r/20241231-rpmcc-v1-2-1212df9b2042@mainlining.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> 2025-01-07dt-bindings: clock: qcom,rpmcc: Add MSM8937 compatibleDaniil Titov1-0/+2 Document the qcom,rpmcc-msm8937 compatible. Signed-off-by: Daniil Titov <daniilt971@gmail.com> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20241231-rpmcc-v1-1-1212df9b2042@mainlining.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> 2025-01-07clk: qcom: ipq5424: Use icc-clk for enabling NoC related clocksVaradarajan Narayanan1-0/+19 Use the icc-clk framework to enable few clocks to be able to create paths and use the peripherals connected on those NoCs. Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/20241213105808.674620-2-quic_varada@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>