diff options
| author | Ludovic Barre <ludovic.barre@st.com> | 2020-04-20 18:18:31 +0200 |
|---|---|---|
| committer | Ulf Hansson <ulf.hansson@linaro.org> | 2020-05-28 11:21:00 +0200 |
| commit | 33ba6fec0012e47f4e72bfab922b99327373f210 (patch) | |
| tree | 1597466bd4cc92eeed5bb4a86eb94512386c0d1c /tools/perf/scripts/python/syscall-counts-by-pid.py | |
| parent | mmc: sdhci-msm: Use OPP API to set clk/perf state (diff) | |
| download | linux-33ba6fec0012e47f4e72bfab922b99327373f210.tar.gz linux-33ba6fec0012e47f4e72bfab922b99327373f210.zip | |
mmc: mmci_sdmmc: fix power on issue due to pwr_reg initialization
This patch fix a power-on issue, and avoid to retry the power sequence.
In power off sequence: sdmmc must set pwr_reg in "power-cycle" state
(value 0x2), to prevent the card from being supplied through the signal
lines (all the lines are driven low).
In power on sequence: when the power is stable, sdmmc must set pwr_reg
in "power-off" state (value 0x0) to drive all signal to high before to
set "power-on".
To avoid writing the same value to the power register several times, this
register is cached by the pwr_reg variable. At probe pwr_reg is initialized
to 0 by kzalloc of mmc_alloc_host.
Like pwr_reg value is 0 at probing, the power on sequence fail because
the "power-off" state is not writes (value 0x0) and the lines
remain drive to low.
This patch initializes "pwr_reg" variable with power register value.
This it done in sdmmc variant init to not disturb default mmci behavior.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Link: https://lore.kernel.org/r/20200420161831.5043-1-ludovic.barre@st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'tools/perf/scripts/python/syscall-counts-by-pid.py')
0 files changed, 0 insertions, 0 deletions