Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...

4 files changed, 156 insertions, 27 deletions

diff --git a/tools/testing/selftests/drivers/net/lib/py/__init__.py b/tools/testing/selftests/drivers/net/lib/py/__init__.py
index 401e70f7f136..8711c67ad658 100644
--- a/tools/testing/selftests/drivers/net/lib/py/__init__.py
+++ b/tools/testing/selftests/drivers/net/lib/py/__init__.py
@@ -7,7 +7,21 @@ KSFT_DIR = (Path(__file__).parent / "../../../..").resolve()
 
 try:
     sys.path.append(KSFT_DIR.as_posix())
+
     from net.lib.py import *
+
+    # Import one by one to avoid pylint false positives
+    from net.lib.py import EthtoolFamily, NetdevFamily, NetshaperFamily, \
+        NlError, RtnlFamily, DevlinkFamily
+    from net.lib.py import CmdExitFailure
+    from net.lib.py import bkg, cmd, bpftool, bpftrace, defer, ethtool, \
+        fd_read_timeout, ip, rand_port, tool, wait_port_listen
+    from net.lib.py import fd_read_timeout
+    from net.lib.py import KsftSkipEx, KsftFailEx, KsftXfailEx
+    from net.lib.py import ksft_disruptive, ksft_exit, ksft_pr, ksft_run, \
+        ksft_setup
+    from net.lib.py import ksft_eq, ksft_ge, ksft_in, ksft_is, ksft_lt, \
+        ksft_ne, ksft_not_in, ksft_raises, ksft_true
 except ModuleNotFoundError as e:
     ksft_pr("Failed importing `net` library from kernel sources")
     ksft_pr(str(e))
diff --git a/tools/testing/selftests/drivers/net/lib/py/env.py b/tools/testing/selftests/drivers/net/lib/py/env.py
index 3bccddf8cbc5..1b8bd648048f 100644
--- a/tools/testing/selftests/drivers/net/lib/py/env.py
+++ b/tools/testing/selftests/drivers/net/lib/py/env.py
@@ -259,7 +259,7 @@ class NetDrvEpEnv(NetDrvEnvBase):
             if not self._require_cmd(comm, "local"):
                 raise KsftSkipEx("Test requires command: " + comm)
         if remote:
-            if not self._require_cmd(comm, "remote"):
+            if not self._require_cmd(comm, "remote", host=self.remote):
                 raise KsftSkipEx("Test requires (remote) command: " + comm)
 
     def wait_hw_stats_settle(self):
diff --git a/tools/testing/selftests/drivers/net/lib/py/load.py b/tools/testing/selftests/drivers/net/lib/py/load.py
index 44151b7b1a24..c4e808407cc4 100644
--- a/tools/testing/selftests/drivers/net/lib/py/load.py
+++ b/tools/testing/selftests/drivers/net/lib/py/load.py
@@ -7,7 +7,7 @@ from lib.py import ksft_pr, cmd, ip, rand_port, wait_port_listen
 
 class GenerateTraffic:
     def __init__(self, env, port=None):
-        env.require_cmd("iperf3", remote=True)
+        env.require_cmd("iperf3", local=True, remote=True)
 
         self.env = env
 
diff --git a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh
index 29b01b8e2215..b6071e80ebbb 100644
--- a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh
+++ b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh
@@ -11,9 +11,11 @@ set -euo pipefail
 LIBDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")")
 
 SRCIF="" # to be populated later
-SRCIP=192.0.2.1
+SRCIP4="192.0.2.1"
+SRCIP6="fc00::1"
 DSTIF="" # to be populated later
-DSTIP=192.0.2.2
+DSTIP4="192.0.2.2"
+DSTIP6="fc00::2"
 
 PORT="6666"
 MSG="netconsole selftest"
@@ -80,7 +82,23 @@ function configure_ip() {
 	ip link set "${SRCIF}" up
 }
 
+function select_ipv4_or_ipv6()
+{
+	local VERSION=${1}
+
+	if [[ "$VERSION" == "ipv6" ]]
+	then
+		DSTIP="${DSTIP6}"
+		SRCIP="${SRCIP6}"
+	else
+		DSTIP="${DSTIP4}"
+		SRCIP="${SRCIP4}"
+	fi
+}
+
 function set_network() {
+	local IP_VERSION=${1:-"ipv4"}
+
 	# setup_ns function is coming from lib.sh
 	setup_ns NAMESPACE
 
@@ -91,10 +109,13 @@ function set_network() {
 	# Link both interfaces back to back
 	link_ifaces
 
+	select_ipv4_or_ipv6 "${IP_VERSION}"
 	configure_ip
 }
 
 function create_dynamic_target() {
+	local FORMAT=${1:-"extended"}
+
 	DSTMAC=$(ip netns exec "${NAMESPACE}" \
 		 ip link show "${DSTIF}" | awk '/ether/ {print $2}')
 
@@ -106,7 +127,33 @@ function create_dynamic_target() {
 	echo "${DSTMAC}" > "${NETCONS_PATH}"/remote_mac
 	echo "${SRCIF}" > "${NETCONS_PATH}"/dev_name
 
+	if [ "${FORMAT}" == "basic" ]
+	then
+		# Basic target does not support release
+		echo 0 > "${NETCONS_PATH}"/release
+		echo 0 > "${NETCONS_PATH}"/extended
+	elif [ "${FORMAT}" == "extended" ]
+	then
+		echo 1 > "${NETCONS_PATH}"/extended
+	fi
+
 	echo 1 > "${NETCONS_PATH}"/enabled
+
+	# This will make sure that the kernel was able to
+	# load the netconsole driver configuration. The console message
+	# gets more organized/sequential as well.
+	sleep 1
+}
+
+# Generate the command line argument for netconsole following:
+#  netconsole=[+][src-port]@[src-ip]/[<dev>],[tgt-port]@<tgt-ip>/[tgt-macaddr]
+function create_cmdline_str() {
+	DSTMAC=$(ip netns exec "${NAMESPACE}" \
+		 ip link show "${DSTIF}" | awk '/ether/ {print $2}')
+	SRCPORT="1514"
+	TGTPORT="6666"
+
+	echo "netconsole=\"+${SRCPORT}@${SRCIP}/${SRCIF},${TGTPORT}@${DSTIP}/${DSTMAC}\""
 }
 
 # Do not append the release to the header of the message
@@ -116,16 +163,9 @@ function disable_release_append() {
 	echo 1 > "${NETCONS_PATH}"/enabled
 }
 
-function cleanup() {
+function do_cleanup() {
 	local NSIM_DEV_SYS_DEL="/sys/bus/netdevsim/del_device"
 
-	# delete netconsole dynamic reconfiguration
-	echo 0 > "${NETCONS_PATH}"/enabled
-	# Remove all the keys that got created during the selftest
-	find "${NETCONS_PATH}/userdata/" -mindepth 1 -type d -delete
-	# Remove the configfs entry
-	rmdir "${NETCONS_PATH}"
-
 	# Delete netdevsim devices
 	echo "$NSIM_DEV_2_ID" > "$NSIM_DEV_SYS_DEL"
 	echo "$NSIM_DEV_1_ID" > "$NSIM_DEV_SYS_DEL"
@@ -137,6 +177,17 @@ function cleanup() {
 	echo "${DEFAULT_PRINTK_VALUES}" > /proc/sys/kernel/printk
 }
 
+function cleanup() {
+	# delete netconsole dynamic reconfiguration
+	echo 0 > "${NETCONS_PATH}"/enabled
+	# Remove all the keys that got created during the selftest
+	find "${NETCONS_PATH}/userdata/" -mindepth 1 -type d -delete
+	# Remove the configfs entry
+	rmdir "${NETCONS_PATH}"
+
+	do_cleanup
+}
+
 function set_user_data() {
 	if [[ ! -d "${NETCONS_PATH}""/userdata" ]]
 	then
@@ -152,18 +203,24 @@ function set_user_data() {
 
 function listen_port_and_save_to() {
 	local OUTPUT=${1}
+	local IPVERSION=${2:-"ipv4"}
+
+	if [ "${IPVERSION}" == "ipv4" ]
+	then
+		SOCAT_MODE="UDP-LISTEN"
+	else
+		SOCAT_MODE="UDP6-LISTEN"
+	fi
+
 	# Just wait for 2 seconds
 	timeout 2 ip netns exec "${NAMESPACE}" \
-		socat UDP-LISTEN:"${PORT}",fork "${OUTPUT}"
+		socat "${SOCAT_MODE}":"${PORT}",fork "${OUTPUT}"
 }
 
-function validate_result() {
+# Only validate that the message arrived properly
+function validate_msg() {
 	local TMPFILENAME="$1"
 
-	# TMPFILENAME will contain something like:
-	# 6.11.1-0_fbk0_rc13_509_g30d75cea12f7,13,1822,115075213798,-;netconsole selftest: netcons_gtJHM
-	#  key=value
-
 	# Check if the file exists
 	if [ ! -f "$TMPFILENAME" ]; then
 		echo "FAIL: File was not generated." >&2
@@ -175,17 +232,32 @@ function validate_result() {
 		cat "${TMPFILENAME}" >&2
 		exit "${ksft_fail}"
 	fi
+}
 
-	if ! grep -q "${USERDATA_KEY}=${USERDATA_VALUE}" "${TMPFILENAME}"; then
-		echo "FAIL: ${USERDATA_KEY}=${USERDATA_VALUE} not found in ${TMPFILENAME}" >&2
-		cat "${TMPFILENAME}" >&2
-		exit "${ksft_fail}"
+# Validate the message and userdata
+function validate_result() {
+	local TMPFILENAME="$1"
+
+	# TMPFILENAME will contain something like:
+	# 6.11.1-0_fbk0_rc13_509_g30d75cea12f7,13,1822,115075213798,-;netconsole selftest: netcons_gtJHM
+	#  key=value
+
+	validate_msg "${TMPFILENAME}"
+
+	# userdata is not supported on basic format target,
+	# thus, do not validate it.
+	if [ "${FORMAT}" != "basic" ];
+	then
+		if ! grep -q "${USERDATA_KEY}=${USERDATA_VALUE}" "${TMPFILENAME}"; then
+			echo "FAIL: ${USERDATA_KEY}=${USERDATA_VALUE} not found in ${TMPFILENAME}" >&2
+			cat "${TMPFILENAME}" >&2
+			exit "${ksft_fail}"
+		fi
 	fi
 
 	# Delete the file once it is validated, otherwise keep it
 	# for debugging purposes
 	rm "${TMPFILENAME}"
-	exit "${ksft_pass}"
 }
 
 function check_for_dependencies() {
@@ -209,6 +281,11 @@ function check_for_dependencies() {
 		exit "${ksft_skip}"
 	fi
 
+	if [ ! -f /proc/net/if_inet6 ]; then
+		echo "SKIP: IPv6 not configured. Check if CONFIG_IPV6 is enabled" >&2
+		exit "${ksft_skip}"
+	fi
+
 	if [ ! -f "${NSIM_DEV_SYS_NEW}" ]; then
 		echo "SKIP: file ${NSIM_DEV_SYS_NEW} does not exist. Check if CONFIG_NETDEVSIM is enabled" >&2
 		exit "${ksft_skip}"
@@ -224,8 +301,15 @@ function check_for_dependencies() {
 		exit "${ksft_skip}"
 	fi
 
-	if ip addr list | grep -E "inet.*(${SRCIP}|${DSTIP})" 2> /dev/null; then
-		echo "SKIP: IPs already in use. Skipping it" >&2
+	REGEXP4="inet.*(${SRCIP4}|${DSTIP4})"
+	REGEXP6="inet.*(${SRCIP6}|${DSTIP6})"
+	if ip addr list | grep -E "${REGEXP4}" 2> /dev/null; then
+		echo "SKIP: IPv4s already in use. Skipping it" >&2
+		exit "${ksft_skip}"
+	fi
+
+	if ip addr list | grep -E "${REGEXP6}" 2> /dev/null; then
+		echo "SKIP: IPv6s already in use. Skipping it" >&2
 		exit "${ksft_skip}"
 	fi
 }
@@ -239,10 +323,41 @@ function check_for_taskset() {
 
 # This is necessary if running multiple tests in a row
 function pkill_socat() {
-	PROCESS_NAME="socat UDP-LISTEN:6666,fork ${OUTPUT_FILE}"
+	PROCESS_NAME4="socat UDP-LISTEN:6666,fork ${OUTPUT_FILE}"
+	PROCESS_NAME6="socat UDP6-LISTEN:6666,fork ${OUTPUT_FILE}"
 	# socat runs under timeout(1), kill it if it is still alive
 	# do not fail if socat doesn't exist anymore
 	set +e
-	pkill -f "${PROCESS_NAME}"
+	pkill -f "${PROCESS_NAME4}"
+	pkill -f "${PROCESS_NAME6}"
 	set -e
 }
+
+# Check if netconsole was compiled as a module, otherwise exit
+function check_netconsole_module() {
+	if modinfo netconsole | grep filename: | grep -q builtin
+	then
+		echo "SKIP: netconsole should be compiled as a module" >&2
+		exit "${ksft_skip}"
+	fi
+}
+
+# A wrapper to translate protocol version to udp version
+function wait_for_port() {
+	local NAMESPACE=${1}
+	local PORT=${2}
+	IP_VERSION=${3}
+
+	if [ "${IP_VERSION}" == "ipv6" ]
+	then
+		PROTOCOL="udp6"
+	else
+		PROTOCOL="udp"
+	fi
+
+	wait_local_port_listen "${NAMESPACE}" "${PORT}" "${PROTOCOL}"
+	# even after the port is open, let's wait 1 second before writing
+	# otherwise the packet could be missed, and the test will fail. Happens
+	# more frequently on IPv6
+	sleep 1
+}