aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/bin/export-to-postgresql-record
diff options
context:
space:
mode:
Diffstat (limited to 'tools/perf/scripts/python/bin/export-to-postgresql-record')
0 files changed, 0 insertions, 0 deletions
generated by cgit v1.2.3 (git 2.39.1) at 2026-02-02 12:30:45 +0000
roups. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 2018-03-02pinctrl: artpec6: dt: add missing pin group uart5noctsNiklas Cassel1-2/+3 Add missing pin group uart5nocts (all pins except cts), which has been supported by the artpec6 pinctrl driver since its initial submission. Fixes: 00df0582eab1 ("pinctrl: Add pincontrol driver for ARTPEC-6 SoC") Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 2018-03-01pinctrl: artpec-6: Add smaller groups for uartsJesper Nilsson1-16/+50 Add group configuration for uarts that are cut down variants, the standard being full, i.e. all signals, flow control, i.e. rx/tx and cts/rts, and rx/tx only. This allows us to be more precise in which pins we're actually using. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 2018-03-01pinctrl: Drop TZ1090 driversJames Hogan6-3362/+0 Now that arch/metag/ has been removed, along with TZ1090 SoC support, remove the TZ1090 pinctrl drivers. They are of no value without the architecture and SoC platform code. Signed-off-by: James Hogan <jhogan@kernel.org> Cc: linux-gpio@vger.kernel.org Cc: linux-metag@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 2018-02-22pinctrl: mcp23s08: add open drain configuration for irq outputPhil Reid1-1/+6 The mcp23s08 series device can be configured for wired and interrupts using an external pull-up and open drain output via the IOCON_ODR bit. And "drive-open-drain" property to enable this. Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Phil Reid <preid@electromag.com.au> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 2018-02-22dt-bindings: pinctrl: mcp23s08: add documentation for drive-open-drainPhil Reid1-0/+2 This flag set the mcp23s08 device irq type to open drain active low. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 2018-02-22pinctrl: mcp23s08: fix probing of mcp23s18Phil Reid1-2/+0 one_regmap_config is always null if mcp type is MCP_TYPE_S18. Remove the null check so that the mcp23s18 will probe. Fixes: 1781af563aef66c2eb7cda ("pinctrl: mcp23s08: spi: Fix duplicate pinctrl debugfs entries") Signed-off-by: Phil Reid <preid@electromag.com.au> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 2018-02-22pinctrl/amd: add get_direction handlerDaniel Kurtz1-0/+14 On boot, gpiochip_add_data() initializes the FLAG_IS_OUT bit in desc->flags iff its gpio_chip does not have ->direction_input() handler, else it is initialized to 0, which implies the GPIO is an "input". Later, the sysfs "direction" handler will use gpiod_get_direction() to get the current direction, but if no ->get_direction() handler is installed, the result will just be the current (initial) value of flags, which will always be OUT irregardless of the initial register value. Add a get_direction() handler to pinctrl-amd to fix this and always provide the correct value for direction. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 2018-02-22pinctrl: Re-use DEFINE_SHOW_ATTRIBUTE() macroAndy Shevchenko1-78/+12 ...instead of open coding file operations followed by custom ->open() callbacks per each attribute. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 2018-02-22pinctrl: ocelot: make function ocelot_pinctrl_probe staticColin Ian King1-1/+1 The function ocelot_pinctrl_probe is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: drivers/pinctrl/pinctrl-ocelot.c:465:5: warning: symbol 'ocelot_pinctrl_probe' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 2018-02-13pinctrl: nomadik: add USB functions for STn8815Linus Walleij1-1/+15 The MUSB block in the Nomadik has two pin settings: high speed or full speed. These correspond to two unique pin group settings: all pins set to function B for high speed and all set to function C for full speed. Full speed uses more pins than high speed. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 2018-02-12pinctrl: msm: Use dynamic GPIO numberingBjorn Andersson1-1/+1 The base of the TLMM gpiochip should not be statically defined as 0, fix this to not artificially restrict the existence of multiple pinctrl-msm devices. Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver") Reported-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 2018-02-12pinctrl: mcp23s08: spi: Fix duplicate pinctrl debugfs entriesJan Kundrát2-3/+24 This is a bit more involved because the pinctrl core so far always assumed that one device (with a unique dev_name) only contains a single pinctrl thing. This is not true for the mcp23s08 driver for chips connected over SPI. They have a "logical address" which means that several chips can share one physical CS signal. A downside of this patch are some possibly ugly names for the debugfs entries, such as "spi1.1-mcp23xxx-pinctrl.2", etc. Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 2018-02-12pinctrl: mcp23s08: spi: Add HW address to gpio_chip.labelJan Kundrát1-3/+6 When several devices are sharing one hardware SPI CS, there is no visual clue in `lsgpio` or in /sys/kernel/debug/gpio about which one is which one. Stuff depends on the enumeration order, and therefore lower chip addresses always go first, but that's just an implementation detail. This change includes the device-specific address in the debug output: gpiochip4: GPIOs 464-479, parent: spi/spi1.1, mcp23s17.2, can sleep: gpiochip3: GPIOs 480-495, parent: spi/spi1.1, mcp23s17.1, can sleep: Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 2018-02-12pinctrl: mcp23s08: spi: Fix regmap debugfs entriesJan Kundrát1-11/+26 The SPI version of this chip allows several devices to be present on the same SPI bus via a local address. If this is in action and if the kernel has debugfs, however, the code attempts to create duplicate entries for the regmap's debugfs: mcp23s08 spi1.1: Failed to create debugfs directory This patch simply assigns a local name matching the device logical address to the `struct regmap_config`. No changes are needed for MCP23S18 because that device does not support any logical addressing. Similarly, I2C devices do not need any action, either, because they are already different in their I2C address. A similar problem is present for the pinctrl debugfs instance, but that one is not addressed by this patch. Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 2018-02-12pinctrl: qcom: Add sdm845 pinctrl driverKyle Yan3-0/+1333 This adds the pinctrl definitions for the TLMM of SDM845. Signed-off-by: Kyle Yan <kyan@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>