aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/event_analyzing_sample.py
diff options
context:
space:
mode:
Diffstat (limited to 'tools/perf/scripts/python/event_analyzing_sample.py')
0 files changed, 0 insertions, 0 deletions
generated by cgit v1.2.3 (git 2.39.1) at 2026-02-02 19:07:45 +0000
anvnm@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-06-19ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMskMugunthan V N1-0/+92 Add pinmux configurations for RGMII based CPSW ethernet to AM335x EVMsk. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Sleep mode is nothing but the values required for the module during inactive state. The pins are configured to its reset state to optimize energy usage for the pins for the suspend/resume cycle Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-06-19ARM: dts: AM33XX: Add pinmux configuration for CPSW to beagleboneMugunthan V N1-0/+67 Add pinmux configurations for MII based CPSW ethernet to am335x-bone. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Sleep mode is nothing but the values required for the module during inactive state. The pins are configured to its reset state to optimize energy usage for the pins for the suspend/resume cycle Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-06-19ARM: dts: omap3-overo: Add default trigger for TWL4030 LEDFlorian Vaussard1-0/+1 Commit c971ff1 'leds: leds-pwm: Defer led_pwm_set() if PWM can sleep' fixed a crash when using a trigger with a pwm-led provided by an external chip. Now it is safe to add the default trigger according to board-overo.c. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-06-19ARM: dts: omap3-tobi: Correct polarity for GPIO LEDFlorian Vaussard1-1/+1 The LED is active low, not active high. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-06-19ARM: dts: omap3-tobi: Add SMSC911X nodeFlorian Vaussard1-0/+48 The Tobi expansion boards embeds a SMSC LAN8700 PHY. Add the corresponding node into the DT. The regulators are not designed to be turned off. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-06-19ARM: dts: OMAP3: Include IRQ headerFlorian Vaussard1-0/+1 Some nodes in OMAP3 DTS now use edge or level sensitive interrupts. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-06-19ARM: dts: Protect pinctrl headers against multiple inclusionsFlorian Vaussard2-0/+10 Pinctrl headers were not protected with #ifndef. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-06-18ARM: AM33XX: clock data: Enable clkout2 as part of initVaibhav Hiremath1-0/+2 clkout2 comes out on the pad and is being used by various external on-board peripherals like, Audio codecs and stuff. So enable the clkout2 by default during init sequence itself. Also, add the missing entry of "clkout2_ck" to the clock table. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-06-18ARM: AM33XX: clock: Add debugSS clock nodesVaibhav Hiremath1-5/+42 Represent debugSS clock interface as provided in CM_WKUP_DEBUGSS_CLKCTRL register, includes - Clock gate for optional DEBUG_CLKA and DBGSYSCLK - Clock Mux for TRC_PMD and STM_PMD - Clock divider for STM and TPIU Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-06-18ARM: dts: OMAP5: Add Palmas MFD node and regulator nodesJ Keerthy1-0/+167 Add Palmas MFD node and the regulator nodes for OMAP5. The node definitions are based on: https://lkml.org/lkml/2013/6/6/25 Boot tested on omap5-uevm board. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: J Keerthy <j-keerthy@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-06-18ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmskPhilip Avinash1-0/+23 PWM output from ecap2 uses as backlight source. Also adds low threshold value to have a uniform divisions in brightness-levels scales with inverse polarity. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-06-18ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmPhilip Avinash1-0/+23 PWM output from ecap0 uses as backlight source. Also adds low threshold value to have a uniform divisions in brightness-levels scales. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-06-18ARM: dts: AM33XX: Add PWMSS device tree nodesPhilip Avinash1-0/+84 Add PWMSS device tree nodes in relation with ECAP & EHRPWM DT nodes to AM33XX SoC family. Also populates device tree nodes for ECAP & EHRPWM by adding necessary properties like pwm-cells, base reg & set disabled as status. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-06-18ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devicesEduardo Valentin1-0/+9 Add bandgap devices for OMAP4460 devices. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-06-18ARM: dts: OMAP443x: Add bandgap entry for OMAP443x devicesEduardo Valentin1-0/+6 Add the bandgap entry for OMAP4430 devices. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> [benoit.cousson@linaro.org: Add blank line and fix reg presentation] Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-06-18ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ lineKevin Hilman8-0/+32 On most OMAP3 platforms, the twl4030 IRQ line is connected to the SYS_NIRQ line on OMAP. Add another DTS include file (twl4030_omap3.dtsi) for boards that hook up the twl4030 this way to include. This allows RTC wake from off-mode to work again on OMAP3-based platforms with twl4030. Tested on 3530/Beagle, 3730/Beagle-xM, 3530/Overo, 3730/Overo-STORM. Special thanks to Florian Vaussard for suggesting use of preprocessor feature. Cc: Florian Vaussard <florian.vaussard@epfl.ch> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-06-18ARM: dts: OMAP3: beagle: enable user button via gpio_keys, enable wakeupKevin Hilman2-0/+50 Using the gpio-keys bindings, configure the user button on Beagle boards. Since the user button is enabled as a wakeup source, also ensure the GPIO pin is mux'd correctly and has IO ring wakeups enabled, so it can also wakeup from off mode. Special thanks to Florian Vaussard for suggesting the preprocessor feature. Cc: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-06-18ARM: dts: OMAP3: beagle/overo: mux console UART, enable wakeupKevin Hilman3-0/+40 Ensure the console uart (UART3) on these boards is mux'd correctly, and IO ring wakeup is enabled. This is needed for serial console wakeups when using DT boot. Thanks to Florian Vaussard for suggestion to use preprocessor features. Cc: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-06-18ARM: dts: omap5-uevm: Add uart pinctrl dataSourav Poddar1-0/+41 Booting omap5 uevm results in the following error "did not get pins for uart error: -19" This happens because omap5 uevm dts file is not adapted to use uart through pinctrl framework. Populate uart pinctrl data to get rid of the error. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> [r.sricharan@ti.com: Replaced constants with preprocessor macros] Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-06-18ARM: dts: omap5-uevm: Add LED support for uEVM blue LEDDan Murphy1-0/+16 Add support for blue LED 1 off of GPIO 153. Make the LED a heartbeat LED Configure the MUX for GPIO output. Signed-off-by: Dan Murphy <dmurphy@ti.com> [r.sricharan@ti.com: Replaced constants with preprocessor macros] Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-06-18ARM: dts: omap5-uevm: Add USB Host supportRoger Quadros2-0/+100 Provide the RESET regulators for the USB PHYs, the USB Host port modes and the PHY devices. Also provide pin multiplexer information for the USB host pins. Signed-off-by: Roger Quadros <rogerq@ti.com> [r.sricharan@ti.com: Replaced constants with preprocessor macros] Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-06-18ARM: dts: omap5: Make uevm as the official board and deprecate sevm supportSricharan R2-81/+4 The uevm is the only official board supported for the OMAP5 soc in mainline. The existent sevm platform will no more be supported. Hence cleaning up the board dts file to have only the data required for uevm. Renaming the board dts file and adding the following cleanups. * There are no devices connected on I2C 2,3,4 buses. So remove the pinmux data for the same. * OMAP5432 and DDR3 memory is used in the uevm. Temperature polling is not supported with DDR3 memories. Because of DDR3 phy limitation the voltage change across DVFS and all shadow registers for DVFS on DDR3 is not supported. Hence the emif kernel driver is not required, so removing the DDR3 device file and emif nodes for uevm. * Keypad is not supported on uevm. So remove the device node. Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-06-18ARM: dts: OMAP4/AM35xx: Add missing dtb in the dtbs targetFlorian Vaussard1-1/+4 When making the dtbs target on OMAP/AM35xx, some trees are not built. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org> 2013-06-18ARM: dts: AM33XX: Use pinctrl constantsFlorian Vaussard4-51/+52 Using constants for pinctrl allows a better readability, and removes redundancy with comments. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>