aboutsummaryrefslogtreecommitdiffstats
path: root/tools/perf/scripts/python/net_dropmonitor.py
diff options
context:
space:
mode:
Diffstat (limited to 'tools/perf/scripts/python/net_dropmonitor.py')
0 files changed, 0 insertions, 0 deletions
generated by cgit v1.2.3 (git 2.39.1) at 2026-02-02 19:06:33 +0000
doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 2017-02-16cpufreq: Do not clear real_cpus mask on policy initRafael J. Wysocki1-2/+0 If new_policy is set in cpufreq_online(), the policy object has just been created and its real_cpus mask has been zeroed on allocation, and the driver's ->init() callback should not touch it. It doesn't need to be cleared again, so don't do that. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> 2017-02-12Linux 4.10-rc8v4.10-rc8Linus Torvalds1-1/+1 2017-02-10Btrfs: fix btrfs_decompress_buf2page()Omar Sandoval1-15/+24 If btrfs_decompress_buf2page() is handed a bio with its page in the middle of the working buffer, then we adjust the offset into the working buffer. After we copy into the bio, we advance the iterator by the number of bytes we copied. Then, we have some logic to handle the case of discontiguous pages and adjust the offset into the working buffer again. However, if we didn't advance the bio to a new page, we may enter this case in error, essentially repeating the adjustment that we already made when we entered the function. The end result is bogus data in the bio. Previously, we only checked for this case when we advanced to a new page, but the conversion to bio iterators changed that. This restores the old, correct behavior. A case I saw when testing with zlib was: buf_start = 42769 total_out = 46865 working_bytes = total_out - buf_start = 4096 start_byte = 45056 The condition (total_out > start_byte && buf_start < start_byte) is true, so we adjust the offset: buf_offset = start_byte - buf_start = 2287 working_bytes -= buf_offset = 1809 current_buf_start = buf_start = 42769 Then, we copy bytes = min(bvec.bv_len, PAGE_SIZE - buf_offset, working_bytes) = 1809 buf_offset += bytes = 4096 working_bytes -= bytes = 0 current_buf_start += bytes = 44578 After bio_advance(), we are still in the same page, so start_byte is the same. Then, we check (total_out > start_byte && current_buf_start < start_byte), which is true! So, we adjust the values again: buf_offset = start_byte - buf_start = 2287 working_bytes = total_out - start_byte = 1809 current_buf_start = buf_start + buf_offset = 45056 But note that working_bytes was already zero before this, so we should have stopped copying. Fixes: 974b1adc3b10 ("btrfs: use bio iterators for the decompression handlers") Reported-by: Pat Erley <pat-lkml@erley.org> Reviewed-by: Chris Mason <clm@fb.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Chris Mason <clm@fb.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Tested-by: Liu Bo <bo.li.liu@oracle.com> 2017-02-10l2tp: do not use udp_ioctl()Eric Dumazet3-2/+28 udp_ioctl(), as its name suggests, is used by UDP protocols, but is also used by L2TP :( L2TP should use its own handler, because it really does not look the same. SIOCINQ for instance should not assume UDP checksum or headers. Thanks to Andrey and syzkaller team for providing the report and a nice reproducer. While crashes only happen on recent kernels (after commit 7c13f97ffde6 ("udp: do fwd memory scheduling on dequeue")), this probably needs to be backported to older kernels. Fixes: 7c13f97ffde6 ("udp: do fwd memory scheduling on dequeue") Fixes: 85584672012e ("udp: Fix udp_poll() and ioctl()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-10xen-netfront: Delete rx_refill_timer in xennet_disconnect_backend()Boris Ostrovsky1-1/+2 rx_refill_timer should be deleted as soon as we disconnect from the backend since otherwise it is possible for the timer to go off before we get to xennet_destroy_queues(). If this happens we may dereference queue->rx.sring which is set to NULL in xennet_disconnect_backend(). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> CC: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-10NET: mkiss: Fix panicRalf Baechle1-2/+2 If a USB-to-serial adapter is unplugged, the driver re-initializes, with dev->hard_header_len and dev->addr_len set to zero, instead of the correct values. If then a packet is sent through the half-dead interface, the kernel will panic due to running out of headroom in the skb when pushing for the AX.25 headers resulting in this panic: [<c0595468>] (skb_panic) from [<c0401f70>] (skb_push+0x4c/0x50) [<c0401f70>] (skb_push) from [<bf0bdad4>] (ax25_hard_header+0x34/0xf4 [ax25]) [<bf0bdad4>] (ax25_hard_header [ax25]) from [<bf0d05d4>] (ax_header+0x38/0x40 [mkiss]) [<bf0d05d4>] (ax_header [mkiss]) from [<c041b584>] (neigh_compat_output+0x8c/0xd8) [<c041b584>] (neigh_compat_output) from [<c043e7a8>] (ip_finish_output+0x2a0/0x914) [<c043e7a8>] (ip_finish_output) from [<c043f948>] (ip_output+0xd8/0xf0) [<c043f948>] (ip_output) from [<c043f04c>] (ip_local_out_sk+0x44/0x48) This patch makes mkiss behave like the 6pack driver. 6pack does not panic. In 6pack.c sp_setup() (same function name here) the values for dev->hard_header_len and dev->addr_len are set to the same values as in my mkiss patch. [ralf@linux-mips.org: Massages original submission to conform to the usual standards for patch submissions.] Signed-off-by: Thomas Osterried <thomas@osterried.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-10net: hns: Fix the device being used for dma mapping during TXKejian Yan1-1/+1 This patch fixes the device being used to DMA map skb->data. Erroneous device assignment causes the crash when SMMU is enabled. This happens during TX since buffer gets DMA mapped with device correspondign to net_device and gets unmapped using the device related to DSAF. Signed-off-by: Kejian Yan <yankejian@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-10x86/mm/ptdump: Fix soft lockup in page table walkerAndrey Ryabinin1-0/+2 CONFIG_KASAN=y needs a lot of virtual memory mapped for its shadow. In that case ptdump_walk_pgd_level_core() takes a lot of time to walk across all page tables and doing this without a rescheduling causes soft lockups: NMI watchdog: BUG: soft lockup - CPU#3 stuck for 23s! [swapper/0:1] ... Call Trace: ptdump_walk_pgd_level_core+0x40c/0x550 ptdump_walk_pgd_level_checkwx+0x17/0x20 mark_rodata_ro+0x13b/0x150 kernel_init+0x2f/0x120 ret_from_fork+0x2c/0x40 I guess that this issue might arise even without KASAN on huge machines with several terabytes of RAM. Stick cond_resched() in pgd loop to fix this. Reported-by: Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Alexander Potapenko <glider@google.com> Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20170210095405.31802-1-aryabinin@virtuozzo.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 2017-02-10x86/tsc: Make the TSC ADJUST sanitizing work for tsc_reliableThomas Gleixner1-9/+7 When the TSC is marked reliable then the synchronization check is skipped, but that also skips the TSC ADJUST sanitizing code. So on a machine with a wreckaged BIOS the TSC deviation between CPUs might go unnoticed. Let the TSC adjust sanitizing code run unconditionally and just skip the expensive synchronization checks when TSC is marked reliable. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Olof Johansson <olof@lixom.net> Link: http://lkml.kernel.org/r/20170209151231.491189912@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 2017-02-10x86/tsc: Avoid the large time jump when sanitizing TSC ADJUSTThomas Gleixner1-2/+3 Olof reported that on a machine which has a BIOS wreckaged TSC the timestamps in dmesg are making a large jump because the TSC value is jumping forward after resetting the TSC ADJUST register to a sane value. This can be avoided by calling the TSC ADJUST saniziting function before initializing the per cpu sched clock machinery. That takes the offset into account and avoid the time jump. What cannot be avoided is that the 'Firmware Bug' warnings on the secondary CPUs are printed with the large time offsets because it would be too much effort and ugly hackery to print those warnings into a buffer and emit them after the adjustemt on the starting CPUs. It's a firmware bug and should be fixed in firmware. The weird timestamps are collateral damage and just illustrate the sillyness of the BIOS folks: [ 0.397445] smp: Bringing up secondary CPUs ... [ 0.402100] x86: Booting SMP configuration: [ 0.406343] .... node #0, CPUs: #1 [1265776479.930667] [Firmware Bug]: TSC ADJUST differs: Reference CPU0: -2978888639075328 CPU1: -2978888639183101 [1265776479.944664] TSC ADJUST synchronize: Reference CPU0: 0 CPU1: -2978888639183101 [ 0.508119] #2 [1265776480.032346] [Firmware Bug]: TSC ADJUST differs: Reference CPU0: -2978888639075328 CPU2: -2978888639183677 [1265776480.044192] TSC ADJUST synchronize: Reference CPU0: 0 CPU2: -2978888639183677 [ 0.607643] #3 [1265776480.131874] [Firmware Bug]: TSC ADJUST differs: Reference CPU0: -2978888639075328 CPU3: -2978888639184530 [1265776480.143720] TSC ADJUST synchronize: Reference CPU0: 0 CPU3: -2978888639184530 [ 0.707108] smp: Brought up 1 node, 4 CPUs [ 0.711271] smpboot: Total of 4 processors activated (21698.88 BogoMIPS) Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170209151231.411460506@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 2017-02-10tick/nohz: Fix possible missing clock reprog after tick soft restartFrederic Weisbecker1-0/+5 ts->next_tick keeps track of the next tick deadline in order to optimize clock programmation on irq exit and avoid redundant clock device writes. Now if ts->next_tick missed an update, we may spuriously miss a clock reprog later as the nohz code is fooled by an obsolete next_tick value. This is what happens here on a specific path: when we observe an expired timer from the nohz update code on irq exit, we perform a soft tick restart which simply fires the closest possible tick without actually exiting the nohz mode and restoring a periodic state. But we forget to update ts->next_tick accordingly. As a result, after the next tick resulting from such soft tick restart, the nohz code sees a stale value on ts->next_tick which doesn't match the clock deadline that just expired. If that obsolete ts->next_tick value happens to collide with the actual next tick deadline to be scheduled, we may spuriously bypass the clock reprogramming. In the worst case, the tick may never fire again. Fix this with a ts->next_tick reset on soft tick restart. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Reviewed: Wanpeng Li <wanpeng.li@hotmail.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1486485894-29173-1-git-send-email-fweisbec@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 2017-02-10perf/core: Fix crash in perf_event_read()Peter Zijlstra1-10/+15 Alexei had his box explode because doing read() on a package (rapl/uncore) event that isn't currently scheduled in ends up doing an out-of-bounds load. Rework the code to more explicitly deal with event->oncpu being -1. Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Tested-by: David Carrillo-Cisneros <davidcc@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: eranian@google.com Fixes: d6a2f9035bfc ("perf/core: Introduce PMU_EV_CAP_READ_ACTIVE_PKG") Link: http://lkml.kernel.org/r/20170131102710.GL6515@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> 2017-02-09nfsd: Revert "nfsd: special case truncates some more"J. Bruce Fields1-37/+60 This patch incorrectly attempted nested mnt_want_write, and incorrectly disabled nfsd's owner override for truncate. We'll fix those problems and make another attempt soon, for the moment I think the safest is to revert. Signed-off-by: J. Bruce Fields <bfields@redhat.com> 2017-02-09scsi: zfcp: fix use-after-free by not tracing WKA port open/close on failed sendSteffen Maier1-4/+4 Dan Carpenter kindly reported: <quote> The patch d27a7cb91960: "zfcp: trace on request for open and close of WKA port" from Aug 10, 2016, leads to the following static checker warning: drivers/s390/scsi/zfcp_fsf.c:1615 zfcp_fsf_open_wka_port() warn: 'req' was already freed. drivers/s390/scsi/zfcp_fsf.c 1609 zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); 1610 retval = zfcp_fsf_req_send(req); 1611 if (retval) 1612 zfcp_fsf_req_free(req); ^^^ Freed. 1613 out: 1614 spin_unlock_irq(&qdio->req_q_lock); 1615 if (req && !IS_ERR(req)) 1616 zfcp_dbf_rec_run_wka("fsowp_1", wka_port, req->req_id); ^^^^^^^^^^^ Use after free. 1617 return retval; 1618 } Same thing for zfcp_fsf_close_wka_port() as well. </quote> Rather than relying on req being NULL (or ERR_PTR) for all cases where we don't want to trace or should not trace, simply check retval which is unconditionally initialized with -EIO != 0 and it can only become 0 on successful retval = zfcp_fsf_req_send(req). With that we can also remove the then again unnecessary unconditional initialization of req which was introduced with that earlier commit. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Fixes: d27a7cb91960 ("zfcp: trace on request for open and close of WKA port") Cc: <stable@vger.kernel.org> #2.6.38+ Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by: Jens Remus <jremus@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 2017-02-09scsi: aacraid: Fix INTx/MSI-x issue with older controllersDave Carroll1-2/+6 commit 78cbccd3bd68 ("aacraid: Fix for KDUMP driver hang") caused a problem on older controllers which do not support MSI-x (namely ASR3405,ASR3805). This patch conditionalizes the previous patch to controllers which support MSI-x Cc: <stable@vger.kernel.org> # v4.7+ Fixes: 78cbccd3bd68 ("aacraid: Fix for KDUMP driver hang") Reported-by: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com> Signed-off-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 2017-02-09scsi: mpt3sas: disable ASPM for MPI2 controllersojab1-0/+3 MPI2 controllers sometimes got lost (i.e. disappear from /sys/bus/pci/devices) if ASMP is enabled. Signed-off-by: Slava Kardakov <ojab@ojab.ru> Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=60644 Cc: <stable@vger.kernel.org> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 2017-02-09net: phy: Initialize mdio clock at probe functionYendapally Reddy Dhananjaya Reddy1-4/+2 USB PHYs need the MDIO clock divisor enabled earlier to work. Initialize mdio clock divisor in probe function. The ext bus bit available in the same register will be used by mdio mux to enable external mdio. Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Fixes: ddc24ae1 ("net: phy: Broadcom iProc MDIO bus driver") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 2017-02-09cpufreq: dt: Don't use generic platdev driver for ti-cpufreq platformsDave Gerlach1-2/+0 Some TI platforms, specifically those in the am33xx, am43xx, dra7xx, and am57xx families of SoCs can make use of the ti-cpufreq driver to selectively enable OPPs based on the exact configuration in use. The ti-cpufreq is given the responsibility of creating the cpufreq-dt platform device when the driver is in use so drop am33xx and dra7xx from the cpufreq-dt-platdev driver so it is not created twice. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 2017-02-09cpufreq: ti: Add cpufreq driver to determine available OPPs at runtimeDave Gerlach3-0/+284 Some TI SoCs, like those in the AM335x, AM437x, DRA7x, and AM57x families, have different OPPs available for the MPU depending on which specific variant of the SoC is in use. This can be determined through use of the revision and an eFuse register present in the silicon. Introduce a ti-cpufreq driver that can read the aformentioned values and provide them as version matching data to the opp framework. Through this the opp-supported-hw dt binding that is part of the operating-points-v2 table can be used to indicate availability of OPPs for each device. This driver also creates the "cpufreq-dt" platform_device after passing the version matching data to the OPP framework so that the cpufreq-dt handles the actual cpufreq implementation. Even without the necessary data to pass the version matching data the driver will still create this device to maintain backwards compatibility with operating-points v1 tables. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>