| Age | Commit message (Collapse) | Author | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Perform basic checks on pin config properties so as not to allow
directly contradictory settings such as setting a pin to more than
one bias or drive mode
- Handle input-threshold-voltage-microvolt property
- Introduce pinctrl_gpio_get_config() handling in the core for SCMI
GPIO using pin control
New drivers:
- GPIO-by-pin control driver (also appearing in the GPIO pull
request) fulfilling a promise on a comment from Grant Likely many
years ago: "can't GPIO just be a front-end for pin control?" it
turns out it can, if and only if you design something new from
scratch, such as SCMI
- Broadcom BCM7038 as a pinctrl-single delegate
- Mobileye EyeQ6Lplus OLB pin controller
- Qualcomm Eliza and Hawi families TLMM pin controllers
- Qualcomm SDM670 and Milos family LPASS LPI pin controllers
- Qualcomm IPQ5210 pin controller
- Realtek RTD1625 pin controller support
- Rockchip RV1103B pin controller support
- Texas Instruments AM62L as a pinctrl-single delegate
Improvements:
- Set config implementation for the Spacemit K1 pin controller"
* tag 'pinctrl-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (84 commits)
pinctrl: qcom: Add Hawi pinctrl driver
dt-bindings: pinctrl: qcom: Describe Hawi TLMM block
dt-bindings: pinctrl: pinctrl-max77620: convert to DT schema
pinctrl: single: Add bcm7038-padconf compatible matching
dt-bindings: pinctrl: pinctrl-single: Add brcm,bcm7038-padconf
dt-bindings: pinctrl: apple,pinctrl: Add t8122 compatible
pinctrl: qcom: sdm670-lpass-lpi: label variables as static
pinctrl: sophgo: pinctrl-sg2044: Fix wrong module description
pinctrl: sophgo: pinctrl-sg2042: Fix wrong module description
pinctrl: qcom: add sdm670 lpi tlmm
dt-bindings: pinctrl: qcom: Add SDM670 LPASS LPI pinctrl
dt-bindings: qcom: lpass-lpi-common: add reserved GPIOs property
pinctrl: qcom: Introduce IPQ5210 TLMM driver
dt-bindings: pinctrl: qcom: add IPQ5210 pinctrl
pinctrl: qcom: Drop redundant intr_target_reg on modern SoCs
pinctrl: qcom: eliza: Fix interrupt target bit
pinctrl: core: Don't use "proxy" headers
pinctrl: amd: Support new ACPI ID AMDI0033
pinctrl: renesas: rzg2l: Drop superfluous blank line
pinctrl: renesas: rzg2l: Fix save/restore of {IOLH,IEN,PUPD,SMT} registers
...
|
|
The Top Level Mode Multiplexer (TLMM) in the Qualcomm Hawi SoC
provides GPIO and pinctrl functionality for UFS, SDC and 226
GPIO pins.
Add a DeviceTree binding to describe the TLMM block on Qualcomm's
Hawi SoC.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Convert pinctrl-max77620 devicetree bindings for the MAX77620 PMIC from
TXT to YAML format. This patch does not change any functionality; the
bindings remain the same.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Add the "brcm,bcm7038-padconf" compatible to the pinctrl-single binding.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The pin controller on the Apple silicon t8122 (M3) SoC is compatible
with the existing driver. Add "apple,t8122-pinctrl" as SoC specific
compatible under "apple,t8103-pinctrl" used by the driver.
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Add the pin controller for the audio Low-Power Island (LPI) on SDM670.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
There can be reserved GPIOs on the LPASS LPI pin controller to possibly
control sensors. Add the property for reserved GPIOs so they can be
avoided appropriately.
Adapted from the same entry in qcom,tlmm-common.yaml.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Add device tree bindings for IPQ5210 TLMM block.
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v7.1
- Add pin configuration support for RZ/T2H and RZ/N2H,
- Fix save/restore of registers for ports with variable pincfg per pin
on RZ/G3E, RZ/V2H(P), RZ/V2N, and RZ/Five,
- Drop a superfluous blank line.
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Document the pin configuration properties supported by the RZ/T2H
pinctrl driver.
The RZ/T2H SoC allows configuring several electrical characteristics
through the DRCTLm (I/O Buffer Function Switching) registers. These
registers control drive strength, bias configuration, Schmitt trigger
input, and output slew rate.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260319141515.2053556-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
HDP being functional depends on the debug configuration on the platform
that can be checked using the access-controllers property, document it.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Linus Walleij <linusw@kernel.org>
Link: https://lore.kernel.org/r/20260226-debug_bus-v6-2-5d794697798d@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add device tree bindings for RTD1625.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Tzuyi Chang <tychang@realtek.com>
Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The previous description was misleading because this hardware block is not
a PWM generator. It does not generate a signal with a specific frequency
and duty ratio.
Instead, it provides a fixed nanosecond-level adjustment to the rising/
falling edges of an existing signal.
The property name is kept as 'realtek,duty-cycle' rather than being
renamed to strictly preserve Device Tree ABI backward compatibility.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Add a generic pin configuration property
"input-threshold-voltage-microvolt" to support hardware designs where the
input logic threshold is decoupled from the power supply voltage.
This property allows the pinctrl driver to configure the correct internal
reference voltage for pins that need to accept input signals at a different
voltage level than their power supply. For example, a pin powered by 3.3V
may need to accept 1.8V logic signals.
This defines the reference for VIH (Input High Voltage) and VIL (Input Low
Voltage) thresholds, enabling proper signal detection across different
voltage domains.
Signed-off-by: Tzuyi Chang <tychang@realtek.com>
Co-developed-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Document compatible for Qualcomm Glymur SoC LPASS TLMM pin controller,
fully compatible with previous SM8650 generation (same amount of pins
and functions).
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
bias properties
It is possible that devices tristate buffers may set the buffer to
the high-Z state in addition to setting pull-up or pull-down on a pin.
Remove this particular restriction to prevent warning on zynqmp systems
where this configuration seems to be valid.
Reported-by: Rob Herring (Arm) <robh@kernel.org>
Fixes: a901e8705f89f ("dt-bindings: pinctrl: pincfg-node: add restrictions on conflicting properties")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Add bindings for pin controller in Milos Low Power Audio SubSystem
(LPASS).
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Even though the type of the 'groups' property of a pinmux node is
specified as string-array in pinmux-node.yaml, but trying to use
multiple strings causes dtbs_check warnings.
For example, checking the following dts ...
$ cat arch/arm64/boot/dts/marvell/armada-3720-test.dts
/dts-v1/;
#include "armada-372x.dtsi"
&pinctrl_nb {
pwm-gpio-pins {
groups = "pwm0", "pwm1", "pwm2", "pwm3";
function = "gpio";
};
};
... results in this warning:
arch/arm64/boot/dts/marvell/armada-3720-test.dtb: pinctrl@13800 (marvell,armada3710-nb-pinctrl): pwm-gpio-pins:groups: ['pwm0', 'pwm1', 'pwm2', 'pwm3'] is too long
from schema $id: http://devicetree.org/schemas/pinctrl/marvell,armada3710-xb-pinctrl.yaml
Add the missing 'items' keyword to the schema to allow using multiple
strings without such warnings. Also adjust the indentation of the next
statements accordingly.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: c1c9641a04e83 ("dt-bindings: pinctrl: Convert marvell,armada-3710-(sb|nb)-pinctrl to DT schema")
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Many of the possible pincfg properties are not compatible with one
another, either because they represent mutually exclusive states for a
pin or because they provide the same information in different units.
Add some simple restrictions to prevent invalid configurations.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Add compatible string fsl,imx25-iomuxc.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Convert fsl,imx27-pinctrl.txt to YAML format.
Additional changes:
- Add the compatible string "fsl,imx1-iomuxc".
- Add gpio@... child nodes.
- Add ranges property.
- Remove the redundant intermediate node between pinmux and group nodes.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Document the Top Level Mode Multiplexer on the Eliza Platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
pinctrl
Document compatible for Qualcomm SA8775P and QCS8300 SoC LPASS TLMM
pin controller, fully compatible with previous SM8450 generation
(same amount of pins and functions).
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Document the compatible string for the RV1103B SoC.
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- Drop the unused devm_pinctrl_unregister() function
- Move pretended generic pin control functionality out of the core
and into the Amlogic AM4 driver. We have something better coming
(hopefully)
New hardware support:
- Spacemit K3 (RISC-V) pin control support
- Atmel AT91 PIO4 (ARM32) SAMA7D65 pin control support
- Exynos9610 (ARM64) pin control support
- Qualcomm Mahua TLMM (ARM64) pin control support
- Microchip Polarfire MSSIO (RISC-V) pin control support
- Ocelot LAN9645XF (multiplatform) pin control support
Improvements:
- Using a few more guards for locking
- Various nonurgent fixes and tweaks"
* tag 'pinctrl-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (73 commits)
pinctrl: generic: move function to amlogic-am4 driver
pinctrl: intel: Align Copyright note with corporate guidelines
pinctrl: mediatek: remove unused drv_offset field
pinctrl: canaan: k230: Fix NULL pointer dereference when parsing devicetree
pinctrl: single: fix refcount leak in pcs_add_gpio_func()
pinctrl: meson: amlogic-a4: Fix device node reference leak in bank helpers
pinctrl: qcom: sm8250-lpass-lpi: Fix i2s2_data_groups definition
pinctrl: core: Remove duplicate error messages
pinctrl: core: Simplify devm_pinctrl_*()
pinctrl: core: Remove unused devm_pinctrl_unregister()
dt-bindings: pinctrl: spacemit: fix drive-strength check warning
pinctrl: fix kismet issues with GENERIC_PINCTRL
pinctrl: tangier: Join tng_pinctrl_probe() into its wrapper
pinctrl: tangier: Remove duplicate error messages
pinctrl: lynxpoint: Remove duplicate error messages
pinctrl: cherryview: Remove duplicate error messages
pinctrl: baytrail: Remove duplicate error messages
pinctrl: intel: Remove duplicate error messages
pinctrl: equilibrium: Fix device node reference leak in pinbank_init()
dt-bindings: pinctrl: pinctrl-microchip-sgpio: add LAN969x
...
|
|
The problem is that one value from drive-strength may match to more than
two different enum groups which lead to DT complaint, switch to use 'anyOf'
to fix this kind warning.
Fixes: c3efac0592f8 ("dt-bindings: pinctrl: spacemit: convert drive strength to schema format")
Signed-off-by: Yixun Lan <dlan@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
group name
The trailing '0' character of the 'usb32_drvvbus0' pin group got removed
during converting the bindings to DT schema.
$ git grep -n usb32_drvvbus v6.18
v6.18:Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt:106:group usb32_drvvbus0
v6.18:drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:195: PIN_GRP_GPIO("usb32_drvvbus0", 0, 1, BIT(0), "drvbus"),
$ git grep -n usb32_drvvbus v6.19-rc1
v6.19-rc1:Documentation/devicetree/bindings/pinctrl/marvell,armada3710-xb-pinctrl.yaml:91: usb2_drvvbus1, usb32_drvvbus ]
v6.19-rc1:drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:195: PIN_GRP_GPIO("usb32_drvvbus0", 0, 1, BIT(0), "drvbus"),
Add it back to match the group name with the one the driver expects.
Fixes: c1c9641a04e8 ("dt-bindings: pinctrl: Convert marvell,armada-3710-(sb|nb)-pinctrl to DT schema")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Document LAN969x compatibles for SGPIO.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Add documentation for the compatibles designated for the following SKUs
in the LAN9645x family:
lan96455f
lan96457f
lan96459f
with fallback a compatible for the smallest 5-ported SKUs lan96455f.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
On Polarfire SoC, the Bank 2 and Bank 4 IOs connected to the
Multiprocessor Subsystem (MSS) are controlled by IOMUX_CRs 1 through 6,
which determine what function in routed to them, and
MSSIO_BANK#_IO_CFG_CRs, which determine the configuration of each pin.
Document it, including several custom configuration options that stem
from MSS Configurator options (the MSS Configurator is part of the FPGA
tooling for this device). "ibufmd" unfortunately is not a 1:1 mapping
with an MSS Configurator option, unlike clamp-diode or lockdown, and I
do not know the effect of any bits in the field. I have no been able to
find an explanation for these bits in documentation.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Document the pinctrl compatible for the Mahua SoC, a 12-core variant
of Glymur. The PDC wake IRQ map differs since PDC handles the interrupt
for GPIO 155 instead of GPIO 143 as seen on Glymur.
Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
In order to access the protected IO power domain registers, a valid
unlock sequence must be performed by writing the required keys to the
AIB Secure Access Register (ASAR).
The ASAR register resides within the APBC register address space.
A corresponding syscon property is added to allow the pinctrl driver
to access this register.
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers changes for v6.20
Add new pin controllers for Samsung Exynos9610 SoC.
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.20
- Add support for GPIO IRQs on RZ/T2H and RZ/N2H.
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Fix a typo in DT documentation, it should describe the 3.3V drive strength
table of SpacemiT k3 SoC.
Fixes: 5adaa1a8c088 ("dt-bindings: pinctrl: spacemit: add K3 SoC support")
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Add a dedicated compatible for the exynos9610-wakeup-eint node, which is
compatbile with Exynos850's implementation (and the Exynos7 fallback).
Signed-off-by: Alexandru Chimac <alex@chimac.ro>
Link: https://patch.msgid.link/20260102-exynos9610-pinctrl-v3-2-3f21f2cfb651@chimac.ro
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Document pin controller support on Exynos9610-series SoCs.
Signed-off-by: Alexandru Chimac <alex@chimac.ro>
Link: https://patch.msgid.link/20260102-exynos9610-pinctrl-v3-1-3f21f2cfb651@chimac.ro
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
The Renesas RZ/T2H (R9A09G077) and Renesas RZ/N2H (R9A09G087) SoCs have
IRQ-capable pins handled by the ICU, which forwards them to the GIC.
The ICU supports 16 IRQ lines, the pins map to these lines arbitrarily,
and the mapping is not configurable.
Document the required properties to handle GPIO IRQ.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251205150234.2958140-4-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Fix a typo in the documentation ("upto" -> "up to").
Signed-off-by: Akiyoshi Kurita <weibu@redadmin.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The pattern for pinmux node names is typically the peripheral name and
instance number, followed by pingroup name if there are multiple options.
Normally the instance number is directly appended to the peripheral
name, like "mmc0" or "i2c2". But if the peripheral name ends with a
number, then it becomes confusing.
On the A20, the PS2 interface controller has two instances. This
produces pinmux node names like "ps2-0-pins". Make the sub-pattern
"[0-9]-" valid to fit this pattern. Avoid having to confusing "ps20-pins"
name.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Add new compatible string for SpacemiT K3 SoC, the pinctrl IP shares
almost same logic with previous K1 generation, but has different register
offset and pin configuration, for example the drive strength and
schmitter trigger settings has been changed.
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
In order to better extend the pinctrl support for future new SoC, convert
drive strength setting from free form text to more standard schema format.
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
My name is stamped into maintainership for a big slew of DT
bindings. Now that it is changing, switch it over to my
kernel.org mail address, which will hopefully be stable for the
rest of my life.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251216-maintainers-dt-v1-1-0b5ab102c9bb@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"The technical details below. For me the CIX Semi and Axis
Communications ARTPEC-9 SoCs were the most interesting new drivers in
this merge window.
Core changes:
- Handle per-direction skew control in the generic pin config
- Drop the pointless subsystem boilerplate banner message during
boot. Less noise in the console. It's available as debug message if
someone really want it
New drivers:
- Samsung Exynos 8890 SoC support
- Samsung Exynos derived Axis Communications ARTPEC-9 SoC support.
These guys literally live next door to me, ARTPEC spells out "Axis
Real-Time Picture Encoding Chip" and is tailored for camera image
streams and is something they have evolved for a quarter of a
century
- Mediatek MT6878 SoC support
- Qualcomm Glymur PMIC support (mostly just compatible strings)
- Qualcomm Kaanapali SoC TLMM support
- Microchip pic64gx "gpio2" SoC support
- Microchip Polarfire "iomux0" SoC support
- CIX Semiconductors SKY1 SoC support
- Rockchip RK3506 SoC support
- Airhoa AN7583 chip support
Improvements:
- Improvements for ST Microelectronics STM32 handling of skew
settings so input and output can have different skew settings
- A whole bunch of device tree binding cleanups: Marvell Armada and
Berlin, Actions Semiconductor S700 and S900, Broadcom Northstar 2
(NS2), Bitmain BM1880 and Spreadtrum SC9860 are moved over to
schema"
* tag 'pinctrl-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits)
pinctrl: add CONFIG_OF dependencies for microchip drivers
pinctrl: starfive: use dynamic GPIO base allocation
pinctrl: single: Fix incorrect type for error return variable
MAINTAINERS: Change Linus Walleij mail address
pinctrl: cix: Fix obscure dependency
dt-bindings: pinctrl: cix,sky1-pinctrl: Drop duplicate newline
dt-bindings: pinctrl: aspeed,ast2600-pinctrl: Add PCIe RC PERST# group
pinctrl: airoha: Fix AIROHA_PINCTRL_CONFS_DRIVE_E2 in an7583_pinctrl_match_data
pinctrl: airoha: fix pinctrl function mismatch issue
pinctrl: cherryview: Convert to use intel_gpio_add_pin_ranges()
pinctrl: intel: Export intel_gpio_add_pin_ranges()
pinctrl: renesas: rzg2l: Refactor OEN register PWPR handling
pinctrl: airoha: convert comma to semicolon
pinctrl: elkhartlake: Switch to INTEL_GPP() macro
pinctrl: cherryview: Switch to INTEL_GPP() macro
pinctrl: emmitsburg: Switch to INTEL_GPP() macro
pinctrl: denverton: Switch to INTEL_GPP() macro
pinctrl: cedarfork: Switch to INTEL_GPP() macro
pinctrl: airoha: add support for Airoha AN7583 PINs
dt-bindings: pinctrl: airoha: Document AN7583 Pin Controller
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma,
brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions
Owl SPS, Marvell AP80x System Controller, Marvell CP110 System
Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema
format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform
compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data()
helpers and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the
code to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e.
in a parent node) on nodes without an interrupt. This matches the
spec description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI"
* tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: kbuild: Skip validating empty examples
dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712
dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node
soc: tegra: Simplify with of_machine_device_match()
soc: qcom: ubwc: Simplify with of_machine_get_match_data()
powercap: dtpm: Simplify with of_machine_get_match_data()
platform: surface: Simplify with of_machine_get_match_data()
irqchip/atmel-aic: Simplify with of_machine_get_match_data()
firmware: qcom: scm: Simplify with of_machine_device_match()
cpuidle: big_little: Simplify with of_machine_device_match()
cpufreq: sun50i: Simplify with of_machine_device_match()
cpufreq: mediatek: Simplify with of_machine_get_match_data()
cpufreq: dt-platdev: Simplify with of_machine_get_match_data()
of: Add wrappers to match root node with OF device ID tables
dt-bindings: eeprom: at25: Add Anvo ANV32C81W
of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size()
of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes()
of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg()
...
|
|
on '^conf' nodes
Add the missing unevaluatedProperties to disallow extra properties on
the '^conf' nodes.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Fix the following DT schema check warning:
./Documentation/devicetree/bindings/pinctrl/cix,sky1-pinctrl.yaml:68:1: [warning] too many blank lines (2 > 1) (empty-lines)
One newline is enough. No functional change.
Signed-off-by: Marek Vasut <marex@nabladev.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add PCIe PERST# group to support for PCIe RC.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # remoteproc
Acked-by: Georgi Djakov <djakov@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for allwinner,sun4i-a10-pwm.yaml
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> # mtd
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org> # For PCI controller bindings
Link: https://patch.msgid.link/20251023143957.2899600-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Update Krzysztof Kozlowski's email address to kernel.org account to stay
reachable.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251021095354.86455-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
