| Age | Commit message (Collapse) | Author | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"power-supply core:
- sysfs: constify pointer passed to dev_attr_psp
- extend DT binding documentation for battery cells to allow
describing voltage drop behaviour
power-supply drivers:
- multiple: Remove unused gpio include header
- multiple: Fix potential IRQ use-after-free on driver unload
- bd71828: Add support for ROHM BD72720
- misc small fixes
reset drivers:
- tdx-ec-poweroff: fix restart"
* tag 'for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (30 commits)
power: supply: bd71828: Use dev_err_probe()
dt-bindings: power: supply: google,goldfish-battery: Convert to DT schema
power: supply: qcom_battmgr: Recognize "LiP" as lithium-polymer
power: supply: wm97xx: Use devm_power_supply_register()
power: supply: wm97xx: Use devm_kcalloc()
power: supply: pm8916_lbc: Fix use-after-free for extcon in IRQ handler
power: reset: tdx-ec-poweroff: fix restart
docs: power: update documentation about removed function
power: supply: wm97xx: Fix NULL pointer dereference in power_supply_changed()
MAINTAINERS: adjust file entry in ROHM BD71828 CHARGER
power: supply: ab8500_chargalg: improve kernel-doc
power: supply: sysfs: Constify pointer passed to dev_attr_psp()
power: supply: bq27xxx: fix wrong errno when bus ops are unsupported
power: reset: nvmem-reboot-mode: respect cell size for nvmem_cell_write
power: supply: sbs-battery: Fix use-after-free in power_supply_changed()
power: supply: rt9455: Fix use-after-free in power_supply_changed()
power: supply: pm8916_lbc: Fix use-after-free in power_supply_changed()
power: supply: pm8916_bms_vm: Fix use-after-free in power_supply_changed()
power: supply: pf1550: Fix use-after-free in power_supply_changed()
power: supply: goldfish: Fix use-after-free in power_supply_changed()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8
- Add a for_each_compatible_node_scoped() loop and convert users in
cpufreq, dmaengine, clk, cdx, powerpc and Arm
- Simplify of/platform.c with scoped loop helpers
- Add fw_devlink tracking for "mmc-pwrseq"
- Optimize fw_devlink callback code size for pinctrl-N properties
- Replace strcmp_suffix() with strends()
DT bindings:
- Support building single binding targets
- Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst
- Add bindings for Freescale AVIC, Realtek RTD1xxx system
controllers, Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI
WT61P803 PUZZLE, Delta Electronics DPS-800-AB power supply,
Infineon IR35221 Digital Multi-phase Controller, Infineon PXE1610
Digital Dual Output 6+1 VR12.5 & VR13 CPU Controller,
socionext,uniphier-smpctrl, and xlnx,zynqmp-firmware
- Lots of trivial binding fixes to address warnings in DTS files.
These are mostly for arm64 platforms which is getting closer to be
warning free. Some public shaming has helped.
- Fix I2C bus node names in examples
- Drop obsolete brcm,vulcan-soc binding
- Drop unreferenced binding headers"
* tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (60 commits)
dt-bindings: interrupt-controller: Add compatiblie string fsl,imx(1|25|27|31|35)-avic
dt-bindings: soc: imx: add fsl,aips and fsl,emi compatible strings
dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement
dt-bindings: firmware: fsl,scu: Mark multi-channel MU layouts as deprecated
cpufreq: s5pv210: Simplify with scoped for each OF child loop
dmaengine: fsl_raid: Simplify with scoped for each OF child loop
clk: imx: imx31: Simplify with scoped for each OF child loop
clk: imx: imx27: Simplify with scoped for each OF child loop
cdx: Use mutex guard to simplify error handling
cdx: Simplify with scoped for each OF child loop
powerpc/wii: Simplify with scoped for each OF child loop
powerpc/fsp2: Simplify with scoped for each OF child loop
ARM: exynos: Simplify with scoped for each OF child loop
ARM: at91: Simplify with scoped for each OF child loop
of: Add for_each_compatible_node_scoped() helper
dt-bindings: Fix emails with spaces or missing brackets
scripts/dtc: Update to upstream version v1.7.2-62-ga26ef6400bd8
dt-bindings: crypto: inside-secure,safexcel: Mandate only ring IRQs
dt-bindings: crypto: inside-secure,safexcel: Add SoC compatibles
of: reserved_mem: Fix placement of __free() annotation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and some changes to GPIO core but mostly
just GPIO driver updates across a wide array of files, adding support
for new models as well as various refactoring changes. Nothing
controversial and everything has spent a good measure of time in
linux-next.
GPIOLIB core:
- shrink the GPIO bus driver stub code
- rework software node support for "undefined" software nodes
- provide and use devm_fwnode_gpiod_get_optional()
- only compile the OF quirk for MT2701 when needed
New drivers:
- add the GPIO driver for ROHM bd72720
- add the gpio-line-mux driver providing 1-to-many mapping for a
single real GPIO
Driver changes:
- refactor gpio-pca9570: use lock guard, add missing headers, use
devres consistently
- add support for a new model (G7 Aspeed sgpiom) to the aspeed-sgpio
driver along with some prerequisite refactoring
- use device_get_match_data() where applicable and save some lines
- add support for more models to gpio-cadence
- add the compatible property to reset-gpio and use it in shared GPIO
management
- drop unnecessary use of irqd_get_trigger_type() in gpio-max77759
- add support for a new variant to gpio-pca953x
- extend build coverage with COMPILE_TEST for more drivers
- constify configfs structures in gpio-sim and gpio-virtuser
- add support for the K3 SoC to gpio-spacemit
- implement the missing .get_direction() callback in gpio-max77620
- add support for Tegra264 to gpio-tegra186
- drop unneeded MODULE_ALIAS() from gpio-menz127
DT bindings:
- document support for the opencores GPIO controller in gpio-mmio
- document new variants for gpio-pca953x
Documentation:
- extensively describe interrupt source detection for gpio-pca953x
and add more models to the list of supported variants"
* tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
gpio: tegra186: Add support for Tegra264
dt-bindings: gpio: Add Tegra264 support
gpio: spacemit-k1: Use PDR for pin direction, not SDR/CDR
gpio: max77620: Implement .get_direction() callback
gpio: aspeed-sgpio: Support G7 Aspeed sgpiom controller
dt-bindings: gpio: aspeed,sgpio: Support ast2700
gpio: aspeed-sgpio: Convert IRQ functions to use llops callbacks
gpio: aspeed-sgpio: Create llops to handle hardware access
gpio: aspeed-sgpio: Remove unused bank name field
gpio: aspeed-sgpio: Change the macro to support deferred probe
regulator: bd71815: switch to devm_fwnode_gpiod_get_optional
gpiolib: introduce devm_fwnode_gpiod_get_optional() wrapper
gpio: mmio: Add compatible for opencores GPIO
dt-bindings: gpio-mmio: Correct opencores GPIO
gpio: pca9570: use lock guards
gpio: pca9570: Don't use "proxy" headers
gpio: pca9570: Use devm_mutex_init() for mutex initialization
MAINTAINERS: Add ROHM BD72720 PMIC
power: supply: bd71828-power: Support ROHM BD72720
power: supply: bd71828: Support wider register addresses
...
|
|
Similar to "syscon-reset", allow using the standard "reg" property
rather than "offset".
Link: https://patch.msgid.link/20251216211556.3047726-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
For compatibility, it is necessary to support both 'reg' and 'offset' at
the same time.
Link: https://patch.msgid.link/20251215212648.3320333-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
There are no emails from MandyJH Liu, no reviews [1] of these bindings, so
clearly no maintenance is happening here. Switch to Mediatek SoC
maintainers.
Cc: MandyJH Liu <mandyjh.liu@mediatek.com>
Link: https://lore.kernel.org/all/?q=f%3Amandyjh.liu%40mediatek.com [1]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251219074035.13001-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Merge immutable branch between MFD, Clk, GPIO, Power, Regulator and RTC
due for the v6.20 merge window to apply further cleanups on top of the
BD72720 power-supply driver contained in this branch.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Convert the Android Goldfish Battery binding to DT schema format.
Move the file to the power/supply directory to match the subsystem.
Update the example node name to 'battery' to comply with generic node
naming standards.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260113092602.3197681-5-visitorckw@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindgings changes for 6.20:
- New board compatibles for i.MX93 11x11 FRDM, Apalis iMX8QP, i.MX91 FRDM,
ifm VHIP4 EvalBoard v1 and v2, TQ-Systems MBLS1028A/MBLS1028A-IND,
i.MX952 EVK, i.MX8MP FRDM
- Add vendor prefix for ifm electronic gmbh
- A couple of small changes for fsl,imx-gpc.yaml and tcg,tpm-tis-i2c.yaml
* tag 'imx-bindings-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: Add compatible for i.MX95 15x15 FRDM board
dt-bindings: arm: fsl: Document ifm VHIP4 EvalBoard v1 and v2
dt-bindings: vendor-prefixes: Document ifm electronic gmbh
dt-bindings: arm: fsl: Add FRDM-IMX91 board
dt-bindings: tpm: Add st,st33tphf2ei2c
dt-bindings: arm: fsl: Add Apalis iMX8QP
dt-bindings: arm: fsl: add i.MX952 EVK board
dt-bindings: arm: fsl: add i.MX93 11x11 FRDM board
dt-bindings: power: fsl,imx-gpc: Document address-cells
dt-bindings: arm: fsl: Add i.MX8MP FRDM board
dt-bindings: arm: fsl: add TQ-Systems boards MBLS1028A and MBLS1028A-IND
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Immutable branch between MFD, Clk, GPIO, Power, Regulator and RTC due for the v6.20 merge window
|
|
ROHM has developed a so called "zero-correction" -algorithm to improve
the fuel-gauging accuracy close to the point where battery is depleted.
This relies on battery specific "VDR" (voltage drop rate) tables, which
are measured from the battery, and which describe the voltage drop rate.
More thorough explanation about the "zero correction" and "VDR"
parameters is here:
https://lore.kernel.org/all/676253b9-ff69-7891-1f26-a8b5bb5a421b@fi.rohmeurope.com/
Document the VDR zero-correction specific battery properties used by the
BD71815, BD71828, BD72720 and some other ROHM chargers. (Note, charger
drivers aren't upstream yet).
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/461f2840a03e0189ecd4f1a7c261014342ddee91.1765804226.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Some of the chargers for lithium-ion batteries use a trickle-charging as
a first charging phase for very empty batteries, to "wake-up" the battery.
Trickle-charging is a low current, constant current phase. After the
voltage of the very empty battery has reached an upper limit for
trickle charging, the pre-charge phase is started with a higher current.
Allow defining the upper limit for trickle charging voltage, after which
the charging should be changed to the pre-charging.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/9c3064ec7e32cda442336bf633fb93355ce6a97d.1765804226.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The term 'trickle-charging' is used to describe a very slow charging
phase, where electrons "trickle-in" the battery.
There are two different use-cases for this type of charging. At least
some Li-Ion batteries can benefit from very slow, constant current,
pre-pre phase 'trickle-charging', if a battery is very empty.
Some other batteries use top-off phase 'trickle-charging', which is
different from the above case.
The battery bindings use the term 'trickle-charge' without specifying
which of the use-cases properties are addressing. This has already
caused some confusion.
Clarify that the 'trickle-charge-current-microamp' refers to the first
one, the "pre-pre" -charging use-case.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/e2794140343103245410c3301f8994e1babaeb96.1765804226.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The GPC power controller is an interrupt controllers and can be referenced
in interrupt-map properties, e.g. PCIe controller, thus the node should
have address-cells property.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
My name is stamped into maintainership for a big slew of DT
bindings. Now that it is changing, switch it over to my
kernel.org mail address, which will hopefully be stable for the
rest of my life.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251216-maintainers-dt-v1-1-0b5ab102c9bb@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- documentation fixes
power-supply drivers:
- add BD71828 charger driver
- add Richtek RT9756 driver
- max77705: add adaptive input current support
- max77705: add support for multiple devices
- misc small fixes
reset drivers:
- add spacemit-p1 poweroff/reboot driver"
* tag 'for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
Revert "power: supply: qcom_battmgr: support disabling charge control"
Documentation: power: rt9756: Document exported sysfs entries
power: supply: rt9756: Add Richtek RT9756 smart cap divider charger
dt-bindings: power: supply: Add Richtek RT9756 smart cap divider charger
driver: reset: spacemit-p1: add driver for poweroff/reboot
power: supply: apm_power: only unset own apm_get_power_status
power: supply: use ktime_divns() to avoid 64-bit division
docs: power: clean up power_supply_class.rst
power: supply: qcom_battmgr: support disabling charge control
power: supply: qcom_battmgr: clamp charge control thresholds
power: supply: wm831x: Check wm831x_set_bits() return value
power: supply: rt9467: Prevent using uninitialized local variable in rt9467_set_value_from_ranges()
power: supply: rt9467: Return error on failure in rt9467_set_value_from_ranges()
power: supply: max17040: Check iio_read_channel_processed() return code
power: supply: cw2015: Check devm_delayed_work_autocancel() return code
power: supply: rt5033_charger: Fix device node reference leaks
power: supply: max77705: Fix potential IRQ chip conflict when probing two devices
power: supply: max77705_charger: implement aicl feature
MAINTAINERS: Add entry for BD71828 charger
power: supply: Add bd718(15/28/78) charger driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma,
brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions
Owl SPS, Marvell AP80x System Controller, Marvell CP110 System
Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema
format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform
compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data()
helpers and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the
code to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e.
in a parent node) on nodes without an interrupt. This matches the
spec description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI"
* tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: kbuild: Skip validating empty examples
dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712
dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node
soc: tegra: Simplify with of_machine_device_match()
soc: qcom: ubwc: Simplify with of_machine_get_match_data()
powercap: dtpm: Simplify with of_machine_get_match_data()
platform: surface: Simplify with of_machine_get_match_data()
irqchip/atmel-aic: Simplify with of_machine_get_match_data()
firmware: qcom: scm: Simplify with of_machine_device_match()
cpuidle: big_little: Simplify with of_machine_device_match()
cpufreq: sun50i: Simplify with of_machine_device_match()
cpufreq: mediatek: Simplify with of_machine_get_match_data()
cpufreq: dt-platdev: Simplify with of_machine_get_match_data()
of: Add wrappers to match root node with OF device ID tables
dt-bindings: eeprom: at25: Add Anvo ANV32C81W
of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size()
of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes()
of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg()
...
|
|
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # remoteproc
Acked-by: Georgi Djakov <djakov@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for allwinner,sun4i-a10-pwm.yaml
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> # mtd
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org> # For PCI controller bindings
Link: https://patch.msgid.link/20251023143957.2899600-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
yamllint has gained a new check which checks for inconsistent quoting
(mixed " and ' quotes within a file). Fix all the cases yamllint found
so we can enable the check (once the check is in a release). As single
quotes are (slightly) preferred, use them throughout the modified files
even if double quotes are mostly used.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20251015232015.846282-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Actions S500/S700/S900 Smart Power System binding to DT
schema format. It's a straight-forward conversion.
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251013215834.783501-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add the document for Richtek RT9756 smart cap divider charger.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/43f38b450706d49305eb63f4c4ae45c5fce4a06f.1761894605.git.cy_huang@richtek.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
On the MT8196 and MT6991 SoCs, the GPU power and frequency is controlled
by some integration logic, referred to as "MFlexGraphics" by MediaTek,
which comes in the form of an embedded controller running
special-purpose firmware.
This controller takes care of the regulators and PLL clock frequencies
to squeeze the maximum amount of power out of the silicon.
Add a binding which models it as a power domain.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add power domain IDs for RV1126B SoC.
Add a new compatible because register fields have changed.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add support for the power controllers found in the MediaTek MT8196
Chromebook SoC.
This chip has three power controllers, two of which located in the
SCP subsystems (where one can be directly controlled and the other
can be controlled only through the HW Voter IP), and one located
in the Multimedia HFRP subsystem, controllable only through the HW
Voter IP.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Document the RPMh Power Domains on the Kaanapali Platform.
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- introduce adc-battery-helper for capacity estimation based on
simple ADC readings of battery voltage and current
- add new properties for battery internal resistance and state of
health
Power-supply drivers:
- ug3105_battery: convert to adc-battery-helper
- intel_dc_ti_battery: New driver for Intel Dollar Cove TI batteries
- rt9467-charger: add voltage and current ADC support
- sbs-charger: support multiple instances
- qcom_battmgr:
- add charge control support
- add support for state of health and internal resistance
- max77705_charger:
- big driver cleanup
- add support for setting charge current
- misc minor fixes and cleanups"
* tag 'for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (38 commits)
power: supply: qcom_battmgr: handle charging state change notifications
power: supply: max77705_charger: use REGMAP_IRQ_REG_LINE macro
power: supply: max77705_charger: rework interrupts
power: supply: max77705_charger: add writable properties
power: supply: max77705_charger: return error when config fails
power: supply: max77705_charger: use regfields for config registers
power: supply: max77705_charger: refactoring: rename charger to chg
mfd: max77705: max77705_charger: move active discharge setting to mfd parent
power: supply: max77976_charger: fix constant current reporting
power: supply: qcom_battmgr: Add charge control support
dt-bindings: soc: qcom,pmic-glink: Add charge limit nvmem properties
power: supply: qcom_battmgr: update compats for SM8550 and X1E80100
power: supply: qcom_battmgr: Add state_of_health property
power: supply: qcom_battmgr: Add resistance power supply property
power: supply: core: Add state_of_health power supply property
power: supply: core: Add resistance power supply property
power: supply: rx51: remove redundant condition checks
dt-bindings: power: supply: bq24190: document charge enable pin
dt-bindings: power: supply: bq27xxx: document optional interrupt
power: supply: intel_dc_ti_battery: Drop no longer relevant comment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
- amlogic: Add support for S6/S7/S7D power-domains controller
- imx: Add support for i.MX91 power-domains
- marvell: Add support for PXA1908 power-domains
- mediatek:
- Add support for modem power sequence
- Add support for RTFF Hardware in MT8196/MT6991
- qcom: Align power-domain definitions for rpmpd
- rockchip: Default to use power-domain support
- thead: Create auxiliary device along with a corresponding reset
driver
- ti: Synchronize on/off state with HW-state for ti-sci power-domains
* tag 'pmdomain-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (25 commits)
pmdomain: thead: Fix error pointer vs NULL bug in th1520_pd_reboot_init()
pmdomain: thead: create auxiliary device for rebooting
driver: reset: th1520-aon: add driver for poweroff/reboot via AON FW
pmdomain: mediatek: airoha: convert from round_rate() to determine_rate()
pmdomain: rockchip: enable ROCKCHIP_PM_DOMAINS with ARCH_ROCKCHIP
pmdomain: marvell: Add PXA1908 power domains
dt-bindings: clock: marvell,pxa1908: Add syscon compatible to apmu
pmdomain: ti-sci: Set PD on/off state according to the HW state
pmdomain: amlogic: Add support for S6 S7 S7D power domains controller
dt-bindings: power: add Amlogic S6 S7 S7D power domains
pmdomain: mediatek: Convert all SoCs to new style regmap retrieval
pmdomain: mediatek: Add support for RTFF Hardware in MT8196/MT6991
pmdomain: mediatek: Add support for modem power sequences
pmdomain: mediatek: Move ctl sequences out of power_on/off functions
pmdomain: mediatek: Handle SoCs with inverted SRAM power-down bits
pmdomain: mediatek: Refactor bus protection regmaps retrieval
dt-bindings: power: mediatek: Document access-controllers property
pmdomain: remove unneeded 'fast_io' parameter in regmap_config
pmdomain: imx93-blk-ctrl: mask DSI and PXP PD domain register on i.MX91
pmdomain: imx93-blk-ctrl: use ARRAY_SIZE() instead of hardcode number
...
|
|
Document active low Charge Enable pin. Battery charging is enabled when
REG01[5:4] = 01 and CE pin = Low. CE pin must be pulled high or low.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Document an optional interrupt found in some controllers of BQ27xxx
series. The pin to which the interrupt is connected is called SOC_INT or
GPOUT.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,pmgr-pwrstate" anymore [1]. Use
"apple,t8103-pmgr-pwrstate" as base compatible as it is the SoC the
driver and bindings were written for.
The implementation on Apple M2 Pro/Max/Ultra SoCs is compatible so add
its per-SoC compatible with the new base.
[1]: https://lore.kernel.org/asahi/12ab93b7-1fc2-4ce0-926e-c8141cfe81bf@kernel.org/
Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
|
|
Add devicetree binding document and related header file for
Amlogic S6 S7 S7D secure power domains.
Signed-off-by: hongyu.chen1 <hongyu.chen1@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250822-pm-s6-s7-s7d-v1-1-82e3f3aff327@amlogic.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Allow specifying access-controllers in the main power controller
node and deprecate the old mediatek,infracfg, mediatek,infracfg-nao
and mediatek,smi properties located in the children.
This is done in order to both simplify the power controller
nodes and in preparation for adding support for new generation
SoCs like MT8196/MT6991 and other variants, which will need
to set protection on new busses.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250805074746.29457-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The active-semi,act8945a binding is documented in multiple places. The
charger child node is documented in regulator/active-semi,act8945a.yaml
and power/supply/active-semi,act8945a-charger.yaml. An old text binding
is in mfd/act8945a.txt.
Update the regulator/active-semi,act8945a.yaml with the additional
descriptions and constraints from
power/supply/active-semi,act8945a-charger.yaml, and then remove it and
mfd/act8945a.txt.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250807214459.4173892-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- battery-info: replace any DT specific bits with fwnode usage
- replace any device-tree code with generic fwnode based handling
Power-supply drivers:
- ug3105_battery: use battery-info API
- qcom_battmgr: report capacity
- qcom_battmgr: support LiPo battery reporting
- add missing missing power-supply ref to a bunch of DT bindings
- update drivers regarding pm_runtime_autosuspend() usage
- misc minor fixes and cleanups
Reset drivers:
- misc minor cleanups"
* tag 'for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits)
power: supply: core: fix static checker warning
power: supply: twl4030_charger: Remove redundant pm_runtime_mark_last_busy() calls
power: supply: bq24190: Remove redundant pm_runtime_mark_last_busy() calls
MAINTAINERS: rectify file entry in QUALCOMM SMB CHARGER DRIVER
power: supply: max1720x correct capacity computation
MAINTAINERS: add myself as smbx charger driver maintainer
power: supply: pmi8998_charger: rename to qcom_smbx
power: supply: qcom_pmi8998_charger: fix wakeirq
power: supply: max14577: Handle NULL pdata when CONFIG_OF is not set
power: return the correct error code
power: reset: POWER_RESET_TORADEX_EC should depend on ARCH_MXC
power: supply: cpcap-charger: Fix null check for power_supply_get_by_name
power: supply: bq25980_charger: Constify reg_default array
power: supply: bq256xx_charger: Constify reg_default array
power: reset: at91-sama5d2_shdwc: Refactor wake-up source logging to use dev_info
power: reset: qcom-pon: Rename variables to use generic naming
power: supply: qcom_battmgr: Add lithium-polymer entry
power: supply: qcom_battmgr: Report battery capacity
power: supply: bq24190: Free battery_info
power: supply: ug3105_battery: Switch to power_supply_batinfo_ocv2cap()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Leave powered-on genpds on until ->sync_state() or late_initcall_sync
- Export a common ->sync_state() helper for genpd providers
- Add generic ->sync_state() support
- Add a bus/driver for genpd provider-devices
- Introduce dev_pm_genpd_is_on() for consumers
pmdomain providers:
- cpuidle-psci: Drop redundant ->sync_state() support
- cpuidle-riscv-sbi: Drop redundant ->sync_state() support
- imx: Set ISI panic write for imx8m-blk-ctrl
- qcom: Add support for Glymur and Milos RPMh power-domains
- qcom: Use of_genpd_sync_state() for power-domains
- rockchip: Add support for the RK3528 variant
- samsung: Fix splash-screen handover by enforcing a ->sync_state()
- sunxi: Add support for Allwinner A523's PCK600 power-controller
- tegra: Opt-out from genpd's common ->sync_state() support for pmc
- thead: Instantiate a GPU power sequencer via the auxiliary bus
- renesas: Move init to postcore_initcalls
- xilinx: Move ->sync_state() support to firmware driver
- xilinx: Use of_genpd_sync_state() for power-domains
pmdomain consumers:
- remoteproc: imx_rproc: Fixup the detect/attach procedure for
pre-booted cores"
* tag 'pmdomain-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (44 commits)
pmdomain: qcom: rpmhpd: Add Glymur RPMh Power Domains
dt-bindings: power: rpmpd: Add Glymur power domains
remoteproc: imx_rproc: detect and attach to pre-booted remote cores
remoteproc: imx_rproc: skip clock enable when M-core is managed by the SCU
pmdomain: core: introduce dev_pm_genpd_is_on()
pmdomain: ti: Select PM_GENERIC_DOMAINS
pmdomain: sunxi: sun20i-ppu: change to tristate and enable for ARCH_SUNXI
pmdomain: sunxi: add driver for Allwinner A523's PCK-600 power controller
pmdomain: sunxi: sun20i-ppu: add A523 support
pmdomain: samsung: Fix splash-screen handover by enforcing a sync_state
cpuidle: riscv-sbi: Drop redundant sync_state support
cpuidle: psci: Drop redundant sync_state support
pmdomain: core: Leave powered-on genpds on until sync_state
pmdomain: core: Leave powered-on genpds on until late_initcall_sync
pmdomain: core: Default to use of_genpd_sync_state() for genpd providers
driver core: Add dev_set_drv_sync_state()
pmdomain: core: Add common ->sync_state() support for genpd providers
driver core: Export get_dev_from_fwnode()
firmware: xilinx: Use of_genpd_sync_state()
firmware: xilinx: Don't share zynqmp_pm_init_finalize()
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are a few new variants of existing chips:
- mt6572 is an older mobile phone chip from mediatek that was
extremely popular a decade ago but never got upstreamed until now
- exynos2200 is a recent high-end mobile phone chip used in a few
Samsung phones like the Galaxy S22
- Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M
(R8A779H0) and used in automotive applications
- Tegra264 is a new chip from NVIDIA, but support is fairly minimal
for now, and not much information is public about it
There are five more chips in a separate branch, as those are new chip
families that I merged along with the necessary infrastructure.
New board support is not that exciting, with a total of 33 newly added
machines here:
- Evaluation platforms for the chips above, plus TI am62d2 and Sophgo
sg2042
- Six 32-bit industrial boards based on stm32, imx6 and am33 chips,
plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and
imx95
- Two newly added ASPEED BMC based motherboards, and one that got
removed
- Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit
msm8976 SoCs
- Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1
- A set-top box based on Amlogic meson-gxm
Updates for existing machines are spread over all the above families.
One notable change here is support for the RP1 I/O chip used in
Raspberry Pi 5"
* tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (606 commits)
riscv: dts: sophgo: fix mdio node name for CV180X
riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device
riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree
riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree
dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings
riscv: dts: sophgo: add ethernet GMAC device for sg2042
riscv: dts: sophgo: Enable ethernet device for Huashan Pi
riscv: dts: sophgo: Add mdio multiplexer device for cv18xx
riscv: dts: sophgo: Add ethernet device for cv18xx
riscv: dts: sophgo: sg2044: add pmu configuration
riscv: dts: sophgo: sg2044: add ziccrse extension
riscv: dts: sophgo: add zfh for sg2042
riscv: dts: sophgo: add ziccrse for sg2042
riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree
riscv: dts: sophgo: sg2044: add PCIe device support for SG2044
riscv: dts: sophgo: sg2044: add MSI device support for SG2044
riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC
riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC
dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000
riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Add bindings for arm,armv7m-nvic, fsl,icoll, fsl,imx23-digctl, Xilinx
INTC, Analog Devices ADT7411, and a bunch of trivial hwmon devices
- Convert fsl,vf610-mscm-ir, fsl,dsu, via,vt8500-timer, nxp,isp1301,
Marvell Armada NETA and BM, apm,xgene1-msi, fsl,mpic-msi,
himax,hx8357d, and sitronix,st7586 bindings to DT schema format
- Fixes for some display bindings
- More indentation clean-ups in examples
- Add more guidelines and clarifications on writing bindings
* tag 'devicetree-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (31 commits)
dt-bindings: Correct indentation and style in DTS example
dt-bindings: display: mediatek,dp: Allow DisplayPort AUX bus
dt-bindings: fsl: convert fsl,vf610-mscm-ir.txt to yaml format
dt-bindings: interrupt-controller: Add fsl,icoll.yaml
dt-bindings: interrupt-controller: Add missing Xilinx INTC binding
dt-bindings: display: sprd,sharkl3-dsi-host: Fix missing clocks constraints
dt-bindings: display: sprd,sharkl3-dpu: Fix missing clocks constraints
dt-bindings: display: imx: convert fsl,dcu.txt to yaml format
dt-bindings: timer: via,vt8500-timer: Convert to YAML
dt-bindings: net: Convert Marvell Armada NETA and BM to DT schema
dt-bindings: trivial-devices: Add undocumented hwmon devices
dt-bindings: interrupt-controller: Convert apm,xgene1-msi to DT schema
dt-bindings: gpu: mali-bifrost: Add Allwinner A523 compatible
docs: dt: writing-schema: Document preferred order of properties
docs: dt: writing-bindings: Document discouraged instance IDs
docs: dt: writing-bindings: Document compatible and filename naming
docs: dt: submitting-patches: Avoid 'YAML' in the subject and add an example
MAINTAINERS: adjust file entry in INTEL STRATIX10 FIRMWARE DRIVERS
docs: dt: writing-bindings: Consistently use single-whitespace
docs: dt: writing-bindings: Express better expectations of "specific"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver (Apple SMC) and extensions to existing drivers
for supporting new HW models. A lot of different impovements across
drivers and in core GPIO code. Details on that are in the signed tag
as usual.
We managed to remove some of the legacy APIs. Arnd Bergmann started to
work on making the legacy bits optional so that we may compile them
only for older platforms that still really need them.
Rob Herring has done a lot of work to convert legacy .txt dt-bindings
for GPIO controllers to YAML. There are only a few left now in the
GPIO tree.
A big part of the commits in this PR concern the conversion of GPIO
drivers to using the new line value setter callbacks. This conversion
is now complete treewide (unless I've missed something) and once all
the changes from different trees land in mainline, I'll send you
another PR containing a commit dropping the legacy callbacks from the
tree.
As the quest to pay back technical dept never really ends, we're
starting another set of interface conversions, this time it's about
moving fields specific to only a handful of drivers using the
gpio-mmio helper out of the core gpio_chip structure that every
controller implements and uses. This cycle we introduce a new set of
APIs and convert a few drivers under drivers/gpio/, next cycle we'll
convert remaining modules treewide (in gpio, pinctrl and mfd trees)
and finally remove the old interfaces and move the gpio-mmio fields
into their own structure wrapping gpio_chip.
One last change I should mention here is the rework of the sysfs
interface. In 2016, we introduced the GPIO character device as the
preferred alternative to the sysfs class under /sys/class/gpio. While
it has seen a wide adoption with the help of its user-space
counterpart - libgpiod - there are still users who prefer the
simplicity of sysfs.
As far as the GPIO subsystem is concerned, the problem is not the
existince of the GPIO class as such but rather the fact that it
exposes the global GPIO numbers to the user-space, stopping us from
ever being able to remove the numberspace from the kernel. To that
end, this release we introduced a parallel, limited sysfs interface
that doesn't expose these numbers and only implements a subset of
features that are relevant to the existing users. This is a result of
several discussions over the course of last year and should allow us
to remove the legacy part some time in the future.
Summary:
GPIOLIB core:
- introduce a parallel, limited sysfs user ABI that doesn't expose
the global GPIO numbers to user-space while maintaining backward
compatibility with the end goal of it completely replacing the
existing interface, allowing us to remove it
- remove the legacy devm_gpio_request() routine which has no more
users
- start the process of allowing to compile-out the legacy parts of
the GPIO core for users who don't need it by introducing a new
Kconfig option: GPIOLIB_LEGACY
- don't use global GPIO numbers in debugfs output from the core code
(drivers still do it, the work is ongoing)
- start the process of moving the fields specific to the gpio-mmio
helper out of the core struct gpio_chip into their own structure
that wraps it: create a new header with modern interfaces and
convert several drivers to using it
- remove the platform data structure associated with the gpio-mmio
helper from the kernel after having converted all remaining users
to generic device properties
- remove legacy struct gpio definition as it has no more users
New drivers:
- add the GPIO driver for the Apple System Management Controller
Driver improvements:
- add support for new models to gpio-adp5585, gpio-tps65219 and
gpio-pca953x
- extend the interrupt support in gpio-loongson-64bit
- allow to mark the simulated GPIO lines as invalid in gpio-sim
- convert all remaining GPIO drivers to using the new GPIO value
setter callbacks
- convert gpio-rcar to using simple device power management ops
callbacks
- don't check if current direction of a line is output before setting
the value in gpio-pisosr and ti-fpc202: the GPIO core already
handles that
- also drop unneeded GPIO range checks in drivers, the core already
makes sure we're within bounds when calling driver callbacks
- use dev_fwnode() where applicable across GPIO drivers
- set line value in gpio-zynqmp-modepin and gpio-twl6040 when the
user wants to change direction of the pin to output even though
these drivers don't need to do anything else to actually set the
direction, otherwise a call like gpiod_direction_output(d, 1) will
not result in the line driver high
- remove the reduntant call to pm_runtime_mark_last_busy() from
gpio-arizona
- use lock guards in gpio-cadence and gpio-mxc
- check the return values of regmap functions in gpio-wcd934x and
gpio-tps65912
- use better regmap interfaces in gpio-wcove and gpio-pca953x
- remove dummy GPIO chip callbacks from several drivers in cases
where the GPIO core can already handle their absence
- allow building gpio-palmas as a module
Fixes:
- use correct bit widths (according to the documentation) in
gpio-virtio
Device-tree bindings:
- convert several of the legacy .txt documents for many different
devices to YAML, improving automatic validation
- create a "trivial" GPIO DT schema that covers a wide range of
simple hardware that share a set of basic GPIO properties
- document new HW: Apple MAC SMC GPIO block and adp5589 I/O expander
- document a new model for pca95xx
- add and/or remove properties in YAML documents for gpio-rockchip,
fsl,qoriq-gpio, arm,pl061 and gpio-xilinx
Misc:
- some minor refactoring in several places, adding/removing forward
declarations, moving defines to better places, constify the
arguments in some functions, remove duplicate includes, etc.
- documentation updates"
* tag 'gpio-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (202 commits)
MIPS: alchemy: gpio: use new GPIO line value setter callbacks for the remaining chips
gpiolib: enable CONFIG_GPIOLIB_LEGACY even for !GPIOLIB
gpio: virtio: Fix config space reading.
gpiolib: make legacy interfaces optional
dt-bindings: gpio: rockchip: Allow use of a power-domain
gpiolib: of: add forward declaration for struct device_node
power: reset: macsmc-reboot: Add driver for rebooting via Apple SMC
gpio: Add new gpio-macsmc driver for Apple Macs
mfd: Add Apple Silicon System Management Controller
soc: apple: rtkit: Make shmem_destroy optional
dt-bindings: mfd: Add Apple Mac System Management Controller
dt-bindings: power: reboot: Add Apple Mac SMC Reboot Controller
dt-bindings: gpio: Add Apple Mac SMC GPIO block
gpio: cadence: Remove duplicated include in gpio-cadence.c
gpio: tps65219: Add support for TI TPS65214 PMIC
gpio: tps65219: Update _IDX & _OFFSET macro prefix
gpio: sysfs: Fix an end of loop test in gpiod_unexport()
dt-bindings: gpio: Convert qca,ar7100-gpio to DT schema
dt-bindings: gpio: Convert maxim,max3191x to DT schema
dt-bindings: gpio: fsl,qoriq-gpio: Add missing mpc8xxx compatibles
...
|
|
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Link: https://lore.kernel.org/r/20250107131456.247610-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250725100241.120106-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
On Apple Silicon machines a clean shutdown or reboot requires
talking to SMC and writing to NVMEM cells. Add a binding for
this MFD sub-device.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250610-smc-6-15-v7-2-556cafd771d3@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add the compatibles for the rpmpd power domains on glymur
boards
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250716152758.4079467-2-pankaj.patil@oss.qualcomm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
For the sake of consistency, use my kernel.org address in all Contact
records in sysfs-devices-power and sysfs-power, and in the power-domain
DT binding.
Signed-off-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://patch.msgid.link/5911353.DvuYhMxLoT@rjwysocki.net
|
|
The A523 PPU is likely the same kind of hardware seen on previous SoCs.
The A523 PCK600, as the name suggests, is likely a customized version
of ARM's PCK-600 power controller. Comparing the BSP driver against
ARM's PPU datasheet shows that the basic registers line up, but
Allwinner's hardware has some additional delay controls in the reserved
register range. As such it is likely not fully compatible with the
standard ARM version.
Document A523 PPU and PCK600 compatibles.
Also reorder the compatible string entries so they are grouped and
ordered by family first, then by SoC model.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20250712074021.805953-2-wens@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Document the RPMh Power Domains on the Milos (e.g. SM7635) SoC.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250707-sm7635-rpmhpd-v2-1-b4aa37acb065@fairphone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Bindings reference the common power supply schema, which already defines
the type (ref) for "monitored-battery" property. Drop the redundant ref
from individual device schemas along with obvious description also
duplicating what is in power-supply.yaml.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250604-dt-bindings-psy-monitored-battery-v1-6-7f755ff75218@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Reference the common power supply schema to bring the definition of
monitored-battery property. Drop also the obvious description because
it is duplicating what is in power-supply.yaml.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20250604-dt-bindings-psy-monitored-battery-v1-5-7f755ff75218@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Reference the common power supply schema to bring the definition of
monitored-battery property.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250604-dt-bindings-psy-monitored-battery-v1-4-7f755ff75218@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Reference the common power supply schema to bring the definition of
monitored-battery property. Drop also the obvious description because
it is duplicating what is in power-supply.yaml.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250604-dt-bindings-psy-monitored-battery-v1-3-7f755ff75218@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Reference the common power supply schema to bring the definition of
monitored-battery property. Drop also the obvious description because
it is duplicating what is in power-supply.yaml.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250604-dt-bindings-psy-monitored-battery-v1-2-7f755ff75218@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
