aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/usb (follow)
AgeCommit message (Collapse)AuthorFilesLines
2025-10-13dt-bindings: usb: qcom,snps-dwc3: Fix bindings for X1E80100Krishna Kurapati1-0/+3
Add the missing multiport controller binding to target list. Fix minItems for interrupt-names to avoid the following error on High Speed controller: usb@a200000: interrupt-names: ['dwc_usb3', 'pwr_event', 'dp_hs_phy_irq', 'dm_hs_phy_irq'] is too short Fixes: 6e762f7b8edc ("dt-bindings: usb: Introduce qcom,snps-dwc3") Cc: stable@vger.kernel.org Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-13dt-bindings: usb: switch: split out ports definitionNeil Armstrong9-52/+75
The ports definition currently defined in the usb-switch.yaml fits standards devices which are either recipient of altmode muxing and orientation switching events or an element of the USB Super Speed data lanes. This doesn't necessarely fit combo PHYs like the Qualcomm USB3/DP Combo which has a different ports representation. Move the ports definition to a separate usb-switch-ports.yaml and reference it next to the usb-switch.yaml, except for the Qualcomm USB3/DP Combo PHY bindings. Reported-by: Rob Herring <robh@kernel.org> Closes: https://lore.kernel.org/all/175462129176.394940.16810637795278334342.robh@kernel.org/ Fixes: 3bad7fe22796 ("dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Reference usb-switch.yaml to allow mode-switch") Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-10-13dt-bindings: usb: dwc3-imx8mp: dma-range is required only for imx8mpXu Yang1-1/+9
Only i.MX8MP need dma-range property to let USB controller work properly. Remove dma-range from required list and add limitation for imx8mp. Fixes: d2a704e29711 ("dt-bindings: usb: dwc3-imx8mp: add imx8mp dwc3 glue bindings") Cc: stable <stable@kernel.org> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-17dt-bindings: usb: Document Renesas RZ/G3E USB3HOSTBiju Das1-0/+87
Document the Renesas RZ/G3E USB3.2 Gen2 Host Controller (a.k.a USB3HOST). The USB3HOST is compliant with the Universal Serial Bus 3.2 Specification Revision 1.0. - Supports 1 downstream USB receptacles - Number of SSP Gen2 or SS ports: 1 - Number of HS or FS or LS ports: 1 - Supports Super Speed Plus Gen2x1 (10 Gbps), Super Speed (5 Gbps), High Speed (480 Mbps), Full Speed (12Mbps), and Low Speed (1.5 Mbps). - Supports all transfer-types: Control, Bulk, Interrupt, Isochronous, and these split-transactions. - Supports Power Control and Over Current Detection. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20250916150255.4231-4-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-17Merge patch series "Add SpacemiT K1 USB3.0 host controller support"Greg Kroah-Hartman1-0/+121
Ze Huang <huang.ze@linux.dev> says: The USB 3.0 controller found in the SpacemiT K1 SoC[1] supports both USB3.0 Host and USB2.0 Dual-Role Device (DRD). This controller is compatible with DesignWare Core USB 3 (DWC3) driver. However, constraints in the `snps,dwc3` bindings limit the ability to describe hardware-specific features in a clean and maintainable way. While `dwc3-of-simple` still serves as a glue layer for many platforms, it requires a split device tree node structure, which is less desirable in newer platforms. To promote a transition toward a flattened `dwc` node structure, this series introduces `dwc3-generic-plat`, building upon prior efforts that exposed the DWC3 core driver [2]. The device tree support for SpacemiT K1 will be submitted separately when the associated PHY driver is ready. Link: https://developer.spacemit.com/documentation?token=AjHDwrW78igAAEkiHracBI9HnTb [1] Link: https://lore.kernel.org/all/20250414-dwc3-refactor-v7-3-f015b358722d@oss.qualcomm.com [2] Link: https://lore.kernel.org/r/20250913-dwc3_generic-v8-0-b50f81f05f95@linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-17dt-bindings: usb: dwc3: add support for SpacemiT K1Ze Huang1-0/+121
Add support for the USB 3.0 Dual-Role Device (DRD) controller embedded in the SpacemiT K1 SoC. The controller is based on the Synopsys DesignWare Core USB 3 (DWC3) IP, supporting USB3.0 host mode and USB 2.0 DRD mode. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Ze Huang <huang.ze@linux.dev> Link: https://lore.kernel.org/r/20250913-dwc3_generic-v8-1-b50f81f05f95@linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20250913-dwc3_generic-v8-1-b50f81f05f95@linux.dev
2025-09-06dt-bindings: usb: usb251xb: support usage case without I2C controlJisheng Zhang1-1/+8
Currently, the usb251xb assumes i2c control, but from HW point of view, the hub supports usage case without any i2c control, I.E we only want the gpio controls, for example the following dt node: usb-hub { compatible = "microchip,usb2512b"; reset-gpios = <&porta 8 GPIO_ACTIVE_LOW>; }; Modify the dt-binding of usb2512b to support this usage case, and add the usage example to the examples section. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250825234509.1041-2-jszhang@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-06dt-bindings: usb: s3c2410-usb: Drop entirely S3C2410Krzysztof Kozlowski1-22/+0
Samsung S3C24xx family of SoCs was removed the Linux kernel in the commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support"), in January 2023. There are no in-kernel users of remaining S3C24xx compatibles. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250831122222.50332-4-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-06usb: dt-bindings: ti,twl6030-usb: convert to DT schemaJihed Chaibi2-21/+48
Convert the legacy TXT binding for the TWL6030 USB module to the modern YAML DT schema format. This adds formal validation and improves documentation using a conditional schema. The legacy twlxxxx-usb.txt file is no longer needed and is removed. Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250824112338.64953-3-jihed.chaibi.dev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-06usb: dt-bindings: ti,twl4030-usb: convert to DT schemaJihed Chaibi2-22/+74
Convert the legacy TXT binding for the TWL4030 USB module to the modern YAML DT schema format. This adds formal validation and improves documentation using a conditional schema. Remove the twl4030 section from the obsolete .txt binding file Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250824112338.64953-2-jihed.chaibi.dev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-06dt-bindings: usb: IXP4xx UDC bindingsLinus Walleij1-0/+39
This adds device tree bindings for the IXP4xx USB Device Controller (UDC). Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250820-ixp4xx-udc-bindings-v1-1-640f29140164@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-13dt-bindings: usb: Drop duplicate nvidia,tegra20-ehci.txtRob Herring (Arm)1-23/+0
The nvidia,tegra20-ehci binding is already documented in ci-hdrc-usb2.yaml, so drop the old text binding. Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250807214351.4172243-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-13dt-bindings: usb: renesas,usbhs: Add RZ/T2H and RZ/N2H supportLad Prabhakar1-3/+25
Document the USBHS controller for the Renesas RZ/T2H (r9a09g077) and RZ/N2H (r9a09g087) SoCs. While the USBHS block is similar to the one found on the RZ/G2L SoC, it differs slightly in terms of interrupt configuration, clock/reset requirements, and register bit definitions. Due to these differences, a new compatible string `renesas,usbhs-r9a09g077` is introduced for the RZ/T2H SoC. The USBHS controller on the RZ/N2H (r9a09g087) SoC is identical to that on the RZ/T2H, so it uses the `renesas,usbhs-r9a09g077` compatible string as a fallback. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250805114730.2491238-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-01Merge tag 'phy-for-6.17' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "New Support: - Qualcomm Milos Synopsys eUSB2 PHY, SM8750 QMP phy support, M31 eUSB2 PHY driver - Samsung Exynos990 usbdrd phy, Exynos7870 MIPI phy support - Renesas RZ/V2N usb2-phy support Updates: - Bulk Yaml binding conversion By Rob H (too many to be listed) - cadence: Sierra PCIe, USB PHY multilink configuration support - Qualcomm refactoring of UFS PHY reset and UFS driver support for phy calibrate API" * tag 'phy-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (74 commits) phy: qcom: phy-qcom-m31: Update IPQ5332 M31 USB phy initialization sequence dt-bindings: phy: Convert brcm,sr-usb-combo-phy to DT schema dt-bindings: phy: Convert ti,da830-usb-phy to DT schema dt-bindings: phy: marvell,mmp2-usb-phy: Drop status from the example dt-bindings: phy: mixel, mipi-dsi-phy: Allow assigned-clock* properties phy: exynos-mipi-video: correct cam0 sysreg property name for exynos7870 phy: qcom: phy-qcom-snps-eusb2: Update init sequence per HPG 1.0.2 phy: qcom: phy-qcom-snps-eusb2: Add missing write from init sequence dt-bindings: phy: qcom,snps-eusb2: document the Milos Synopsys eUSB2 PHY dt-bindings: usb: qcom,snps-dwc3: Add Milos compatible phy: rockchip-pcie: Properly disable TEST_WRITE strobe signal phy: rockchip-pcie: Enable all four lanes if required dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for QCS615 phy: qcom: qmp-combo: Add missing PLL (VCO) configuration on SM8750 phy: qcom: m31-eusb2: drop registration printk phy: qcom: m31-eusb2: fix match data santity check phy: qcom: qmp-pcie: Update PHY settings for QCS8300 & SA8775P phy: qualcomm: phy-qcom-eusb2-repeater: Don't zero-out registers dt-bindings: phy: qcom,snps-eusb2-repeater: Remove default tuning values phy: mediatek: tphy: Cleanup and document slew calibration ...
2025-07-29Merge tag 'devicetree-for-6.17' of ↵Linus Torvalds1-24/+0
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Add bindings for arm,armv7m-nvic, fsl,icoll, fsl,imx23-digctl, Xilinx INTC, Analog Devices ADT7411, and a bunch of trivial hwmon devices - Convert fsl,vf610-mscm-ir, fsl,dsu, via,vt8500-timer, nxp,isp1301, Marvell Armada NETA and BM, apm,xgene1-msi, fsl,mpic-msi, himax,hx8357d, and sitronix,st7586 bindings to DT schema format - Fixes for some display bindings - More indentation clean-ups in examples - Add more guidelines and clarifications on writing bindings * tag 'devicetree-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (31 commits) dt-bindings: Correct indentation and style in DTS example dt-bindings: display: mediatek,dp: Allow DisplayPort AUX bus dt-bindings: fsl: convert fsl,vf610-mscm-ir.txt to yaml format dt-bindings: interrupt-controller: Add fsl,icoll.yaml dt-bindings: interrupt-controller: Add missing Xilinx INTC binding dt-bindings: display: sprd,sharkl3-dsi-host: Fix missing clocks constraints dt-bindings: display: sprd,sharkl3-dpu: Fix missing clocks constraints dt-bindings: display: imx: convert fsl,dcu.txt to yaml format dt-bindings: timer: via,vt8500-timer: Convert to YAML dt-bindings: net: Convert Marvell Armada NETA and BM to DT schema dt-bindings: trivial-devices: Add undocumented hwmon devices dt-bindings: interrupt-controller: Convert apm,xgene1-msi to DT schema dt-bindings: gpu: mali-bifrost: Add Allwinner A523 compatible docs: dt: writing-schema: Document preferred order of properties docs: dt: writing-bindings: Document discouraged instance IDs docs: dt: writing-bindings: Document compatible and filename naming docs: dt: submitting-patches: Avoid 'YAML' in the subject and add an example MAINTAINERS: adjust file entry in INTEL STRATIX10 FIRMWARE DRIVERS docs: dt: writing-bindings: Consistently use single-whitespace docs: dt: writing-bindings: Express better expectations of "specific" ...
2025-07-22dt-bindings: usb: qcom,snps-dwc3: Add Milos compatibleLuca Weiss1-0/+3
Document the Milos dwc3 compatible. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20250715-sm7635-eusb-phy-v3-1-6c3224085eb6@fairphone.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-07-15dt-bindings: usb: convert lpc32xx-udc.txt to yaml formatFrank Li2-28/+50
Convert lpc32xx-udc.txt to yaml format. Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250623203011.2473290-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-07-07dt-bindings: usb: Add compatible strings for s32g2/s32g3Ghennadi Procopciuc2-0/+7
Add the compatible strings for the NXP s32g2 and s32g3. These chips are mostly compatible. The one difference is that the s32g2-usbmisc device has an errata ERR050474 which requires a special flag to be set for handling packages that aren't 4 byte aligned. Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/596d188a-9a2d-41e5-af70-c99bc2b7ca7a@sabinyo.mountain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-28dt-bindings: usb: genesys,gl850g: add downstream facing portsDmitry Baryshkov1-0/+12
In order to describe connections between Genesys GL850G hub and corresponding Type-C connectors, follow example of RTS5411 and describe downstream facing ports. Unline normal case of ports being connected to a USB device, hotplug ports use OF graph representation. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250608-genesys-ports-v1-2-09ca19f6838e@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-28dt-bindings: usb: genesys,gl850g: use usb-hub.yamlDmitry Baryshkov1-14/+2
In order to reduce duplication, switch GL850G to use USB hub bindings instead of using simple usb-device.yaml Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250608-genesys-ports-v1-1-09ca19f6838e@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-26dt-bindings: trivial-devices: add compatible string nxp,isp1301 from isp1301.txtFrank Li1-24/+0
Delete isp1301.txt and add compatible string nxp,isp1301 to trivial-devices because this i2c device have only reg propepty. Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250623204048.2493819-1-Frank.Li@nxp.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-06-24dt-bindings: usb: dwc2: rename sophgo usb compatible stringInochi Amaoto1-1/+1
The support for Sophgo CV1800 series SoC introduces a wildcard compatible string "sophgo,cv1800-usb", rename it to sophgo,cv1800b-usb to match a real world SoC. As the compatible string is not used in any board dts. It is safe to rename it. Signed-off-by: Inochi Amaoto <inochiama@gmail.com> Link: https://lore.kernel.org/r/20250618031132.373216-2-inochiama@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-19dt-bindings: usb: renesas,usbhs: Add RZ/V2N SoC supportLad Prabhakar1-0/+1
Document the Renesas USBHS controller found on the Renesas RZ/V2N (R9A09G056) SoC. The USBHS block on RZ/V2N is functionally identical to the one on the RZ/G2L family, so no driver changes are needed. The existing "renesas,rzg2l-usbhs" fallback compatible will continue to be used for handling this IP. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20250528133440.168133-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-06Merge tag 'usb-6.16-rc1' of ↵Linus Torvalds17-97/+998
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.16-rc1. Included in here are the following: - USB offload support for audio devices. I think this takes the record for the most number of patch series (30+) over the longest period of time (2+ years) to get merged properly. Many props go to Wesley Cheng for seeing this effort through, they took a major out-of-tree hacked-up-monstrosity that was created by multiple vendors for their specific devices, got it all merged into a semi-coherent set of changes, and got all of the different major subsystems to agree on how this should be implemented both with changes to their code as well as userspace apis, AND wrangled the hardware companies into agreeing to go forward with this, despite making them all redo work they had already done in their private device trees. This feature offers major power savings on embedded devices where a USB audio stream can continue to flow while the rest of the system is sleeping, something that devices running on battery power really care about. There are still some more small tweaks left to be done here, and those patches are still out for review and arguing among the different hardware companies, but this is a major step forward and a great example of how to do upstream development well. - small number of thunderbolt fixes and updates, things seem to be slowing down here (famous last words...) - xhci refactors and reworking to try to handle some rough corner cases in some hardware implementations where things don't always work properly - typec driver updates - USB3 power management reworking and updates - Removal of some old and orphaned UDC gadget drivers that had not been used in a very long time, dropping over 11 thousand lines from the tree, always a nice thing, making up for the 12k lines added for the USB offload feature. - lots of little updates and fixes in different drivers All of these have been in linux-next for over 2 weeks, the USB offload logic has been in there for 8 weeks now, with no reported issues" * tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits) ALSA: usb-audio: qcom: fix USB_XHCI dependency ASoC: qdsp6: fix compile-testing without CONFIG_OF usb: misc: onboard_usb_dev: fix build warning for CONFIG_USB_ONBOARD_DEV_USB5744=n usb: typec: tipd: fix typo in TPS_STATUS_HIGH_VOLAGE_WARNING macro USB: typec: fix const issue in typec_match() USB: gadget: udc: fix const issue in gadget_match_driver() USB: gadget: fix up const issue with struct usb_function_instance USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB USB: serial: bus: fix const issue in usb_serial_device_match() usb: usbtmc: Fix timeout value in get_stb usb: usbtmc: Fix read_stb function and get_stb ioctl ALSA: qc_audio_offload: try to reduce address space confusion ALSA: qc_audio_offload: avoid leaking xfer_buf allocation ALSA: qc_audio_offload: rename dma/iova/va/cpu/phys variables ALSA: usb-audio: qcom: Fix an error handling path in qc_usb_audio_probe() usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence dt-bindings: usb: ti,usb8041: Add binding for TI USB8044 hub controller usb: misc: onboard_usb_dev: Add support for TI TUSB8044 hub usb: gadget: lpc32xx_udc: Use USB API functions rather than constants usb: gadget: epautoconf: Use USB API functions rather than constants ...
2025-06-05Merge tag 'phy-for-6.16' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "As usual featuring couple of new driver and bunch of new device support and some driver changes to Freescale, rockchip driver along with couple of yaml binding conversions. New Support: - Qualcomm IPQ5424 qusb2 support, IPQ5018 uniphy-pcie driver - Rockchip usb2 support for RK3562, RK3036 usb2 phy support - Samsung exynos2200 eusb2 phy support and driver refactoring for this support, exynos7870 USBDRD support - Mediatek MT7988 xs-phy support - Broadcom BCM74110 usb phy support - Renesas RZ/V2H(P) usb2 phy support Updates: - Freescale phy rate claculation updates, i.MX95 tuning support - Better error handling for amlogic pcie phy - Rockchip color depth configuration and management support - Yaml binding conversion for RK3399 Type-C and PCIe Phy" * tag 'phy-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (77 commits) phy: tegra: p2u: Broaden architecture dependency phy: rockchip: inno-usb2: Add usb2 phy support for rk3562 dt-bindings: phy: rockchip,inno-usb2phy: add rk3562 phy: rockchip: inno-usb2: add phy definition for rk3036 dt-bindings: phy: rockchip,inno-usb2phy: add rk3036 compatible phy: freescale: fsl-samsung-hdmi: Improve LUT search for best clock phy: freescale: fsl-samsung-hdmi: Refactor finding PHY settings phy: freescale: fsl-samsung-hdmi: Rename phy_clk_round_rate phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/V2H(P) phy: renesas: phy-rcar-gen3-usb2: Sort compatible entries by SoC part number dt-bindings: phy: renesas,usb2-phy: Document RZ/V2H(P) SoC dt-bindings: phy: renesas,usb2-phy: Add clock constraint for RZ/G2L family phy: exynos5-usbdrd: support Exynos USBDRD 3.2 4nm controller phy: phy-snps-eusb2: add support for exynos2200 phy: phy-snps-eusb2: refactor reference clock init phy: phy-snps-eusb2: make reset control optional phy: phy-snps-eusb2: make repeater optional phy: phy-snps-eusb2: split phy init code phy: phy-snps-eusb2: refactor constructs names phy: move phy-qcom-snps-eusb2 out of its vendor sub-directory ...
2025-05-31Merge tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-3/+16
Pull SoC devicetree updates from Arnd Bergmann: "There are 11 newly supported SoCs, but these are all either new variants of existing designs, or straight reuses of the existing chip in a new package: - RK3562 is a new chip based on the old Cortex-A53 core, apparently a low-cost version of the Cortex-A55 based RK3568/RK3566. - NXP i.MX94 is a minor variation of i.MX93/i.MX95 with a different set of on-chip peripherals. - Renesas RZ/V2N (R9A09G056) is a new member of the larger RZ/V2 family - Amlogic S6/S7/S7D - Samsung Exynos7870 is an older chip similar to Exynos7885 - WonderMedia wm8950 is a minor variation on the wm8850 chip - Amlogic s805y is almost idential to s805x - Allwinner A523 is similar to A527 and T527 - Qualcomm MSM8926 is a variant of MSM8226 - Qualcomm Snapdragon X1P42100 is related to R1E80100 There are also 65 boards, including reference designs for the chips above, this includes - 12 new boards based on TI K3 series chips, most of them from Toradex - 10 devices using Rockchips RK35xx and PX30 chips - 2 phones and 2 laptops based on Qualcomm Snapdragon designs - 10 NXP i.MX8/i.MX9 boards, mostly for embedded/industrial uses - 3 Samsung Galaxy phones based on Exynos7870 - 5 Allwinner based boards using a variety of ARMv8 chips - 9 32-bit machines, each based on a different SoC family Aside from the new hardware, there is the usual set of cleanups and newly added hardware support on existing machines, for a total of 965 devicetree changesets" * tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (956 commits) MAINTAINERS, mailmap: update Sven Peter's email address arm64: dts: renesas: rzg3e-smarc-som: Reduce I2C2 clock frequency arm64: dts: nuvoton: Add pinctrl ARM: dts: samsung: sp5v210-aries: Align wifi node name with bindings arm64: dts: blaize-blzp1600: Enable GPIO support dt-bindings: clock: socfpga: convert to yaml arm64: dts: rockchip: move rk3562 pinctrl node outside the soc node arm64: dts: rockchip: fix rk3562 pcie unit addresses arm64: dts: rockchip: move rk3528 pinctrl node outside the soc node arm64: dts: rockchip: remove a double-empty line from rk3576 core dtsi arm64: dts: rockchip: move rk3576 pinctrl node outside the soc node arm64: dts: rockchip: fix rk3576 pcie unit addresses arm64: dts: rockchip: Drop assigned-clock* from cpu nodes on rk3588 arm64: dts: rockchip: Add missing SFC power-domains to rk3576 Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0" arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes arm64: dts: mt6359: Rename RTC node to match binding expectations arm64: dts: mt8365-evk: Add goodix touchscreen support arm64: dts: mediatek: mt8188: Add missing #reset-cells property arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board ...
2025-05-29Merge tag 'devicetree-for-6.16' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DT Bindings: - Convert all remaining interrupt-controller bindings to DT schema - Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC PMC, imx-drm, and ftm-quaddec to DT schema - Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te, maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard - Add top-level constraints for renesas,vsp1 and renesas,fcp - Add missing constraint in amlogic,pinctrl-a4 'group' nodes - Adjust the allowed properties for dwc3-xilinx, sony,imx219, pci-iommu, and renesas,dsi - Add EcoNet vendor prefix - Fix the reserved-memory.yaml in fsl,qman-fqd - Drop obsolete numa.txt and cpu-topology.txt which are schemas in dtschema now - Drop Renesas RZ/N1S bindings - Ensure Arm cpu nodes don't allow undocumented properties. Add all the properties which are in use and undocumented. Drop the Mediatek cpufreq binding which is not a binding, but just what DT properties the driver uses. - Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU - Update documentation on defining child nodes with separate schemas - Add bindings to PSCI MAINTAINERS entry DT core: - Add new functions to simplify driver handling of 'memory-region' properties. Users to be added next cycle. - Simplify of_dma_set_restricted_buffer() to use of_for_each_phandle() - Add missing unlock on error in unittest_data_add()" * tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (87 commits) dt-bindings: timer: Add fsl,vf610-pit.yaml dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card dt-bindings: arm/cpus: Allow 2 power-domains entries dt-bindings: usb: dwc3-xilinx: allow dma-coherent media: dt-bindings: sony,imx219: Allow props from video-interface-devices dt-bindings: soundwire: qcom: Document v2.1.0 version of IP block dt-bindings: watchdog: fsl-imx-wdt: add compatible string fsl,ls1021a-wdt dt-bindings: pinctrl: amlogic,pinctrl-a4: Add missing constraint on allowed 'group' node properties dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller dt-bindings: trivial-devices: Add VZ89TE to trivial media: dt-bindings: renesas,vsp1: add top-level constraints media: dt-bindings: renesas,fcp: add top-level constraints dt-bindings: trivial-devices: Add Maxim max30208 dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml reference dt-bindings: interrupt-controller: Convert ti,omap-intc-irq to DT schema dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema dt-bindings: interrupt-controller: Convert technologic,ts4800-irqc to DT schema ...
2025-05-27dt-bindings: usb: dwc3-xilinx: allow dma-coherentRadhey Shyam Pandey1-0/+2
On Versal Gen 2 SoC the LPD USB DMA controller is coherent with the CPU so allow specifying the information. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/1747401516-286356-1-git-send-email-radhey.shyam.pandey@amd.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-05-22Merge tag 'v6.16-rockchip-dts64-2' of ↵Arnd Bergmann1-3/+16
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New SoC the RK3562 (4xA53, Mali-G52) with one evaluation board. New boards: - Cobra and PP1516 from Theobroma-Systems (build around the PX30) - Radxa Rock 5B+ (rk3588) - Rockchip RK3399 industrial eval board New peripherals: - GMAC + SDMMC/SDIO on rk3528 - SAI + HDMI-audio on rk3576 Interesting general updates: - move rk3528 i2c + uart aliases as requested - rk3568 PCIe3 MSI to use GIC ITS - update deprecated dwmac reset properties on some px30 boards - updates for cypress usb hubs on some Theobroma boards Binding taken with Greg's blessing https://lore.kernel.org/all/2025051550-polish-prude-ed56@gregkh/ * tag 'v6.16-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (35 commits) arm64: dts: rockchip: Improve LED config for NanoPi R5S arm64: dts: rockchip: add px30-pp1516 base dtsi and board variants dt-bindings: arm: rockchip: add PX30-PP1516 boards from Theobroma Systems arm64: dts: rockchip: add px30-cobra base dtsi and board variants dt-bindings: arm: rockchip: add PX30-Cobra boards from Theobroma Systems arm64: dts: rockchip: move reset to dedicated eth-phy node on ringneck arm64: dts: rockchip: add basic mdio node to px30 arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma with Haikou arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma arm64: dts: rockchip: fix internal USB hub instability on RK3399 Puma dt-bindings: usb: cypress,hx3: Add support for all variants arm64: dts: rockchip: move rk3528 i2c+uart aliases to board files arm64: dts: rockchip: drop wrong spdif clock from edp1 on rk3588 arm64: dts: rockchip: Add RK3562 evb2 devicetree arm64: dts: rockchip: add core dtsi for RK3562 SoC dt-bindings: arm: rockchip: Add rk3562 evb2 board dt-bindings: soc: rockchip: Add rk3562 syscon compatibles dt-bindings: rockchip: pmu: Add rk3562 compatible arm64: dts: rockchip: Enable Ethernet controller on Radxa E20C arm64: dts: rockchip: Add GMAC nodes for RK3528 ... Link: https://lore.kernel.org/r/3998939.iIbC2pHGDl@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-05-21dt-bindings: usb: ti,usb8041: Add binding for TI USB8044 hub controllerMike Looijmans1-1/+3
The TI USB8044 is similar to the USB8041. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250507131143.2243079-2-mike.looijmans@topic.nl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-21dt-bindings: usb: samsung,exynos-dwc3: add dt-schema ExynosAutov920Pritam Manohar Sutar1-0/+16
Add a dedicated compatible for USB controller found in this SoC Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Pritam Manohar Sutar <pritam.sutar@samsung.com> Link: https://lore.kernel.org/r/20250516071333.3223226-2-pritam.sutar@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-21dt-bindings: usb: Add Parade PS8833 Type-C retimer variantAleksandrs Vinarskis1-2/+5
Appears to behave similarly to Parade PS8830. Found on some Qualcomm Snapdragon X1 devices, such as Asus Zenbook A14. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> Link: https://lore.kernel.org/r/20250512092745.249293-2-alex.vinarskis@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-15dt-bindings: usb: cypress,hx3: Add support for all variantsLukasz Czechowski1-3/+16
The Cypress HX3 hubs use different default PID value depending on the variant. Update compatibles list. Becasuse all hub variants use the same driver data, allow the dt node to have two compatibles: leftmost which matches the HW exactly, and the second one as fallback. Fixes: 1eca51f58a10 ("dt-bindings: usb: Add binding for Cypress HX3 USB 3.0 family") Cc: stable@vger.kernel.org # 6.6 Cc: stable@vger.kernel.org # Backport of the patch ("dt-bindings: usb: usb-device: relax compatible pattern to a contains") from list: https://lore.kernel.org/linux-usb/20250418-dt-binding-usb-device-compatibles-v2-1-b3029f14e800@cherry.de/ Cc: stable@vger.kernel.org # Backport of the patch in this series fixing product ID in onboard_dev_id_table in drivers/usb/misc/onboard_usb_dev.c driver Signed-off-by: Lukasz Czechowski <lukasz.czechowski@thaumatec.com> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250425-onboard_usb_dev-v2-2-4a76a474a010@thaumatec.com [taken with Greg's blessing] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-05-14dt-bindings: phy: rockchip: Convert RK3399 Type-C PHY to schemaRob Herring (Arm)1-1/+1
Convert the Rockchip RK3399 Type-C PHY to DT schema format. Add the missing "power-domains" property and "port" and "orientation-switch" properties in the child nodes. Omit the previously deprecated properties as they aren't used anywhere. Drop the 2nd example which was pretty much identical to the 1st example. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250416202419.3836688-1-robh@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-05-01dt-bindings: usb: realtek,rts5411: Adapt usb-hub.yamlPin-yen Lin1-39/+13
Inherit usb-hub.yaml and remove duplicated schemas. Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250422082957.2058229-4-treapking@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-01dt-bindings: usb: Add binding for PS5511 hub controllerPin-yen Lin1-0/+108
Parade PS5511 is USB hub with 4 USB 3.2 compliant 5Gbps downstream(DS) ports, and 1 extra USB 2.0 downstream port. The hub has one reset pin control and two power supplies (3V3 and 1V1). Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250422082957.2058229-3-treapking@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-01dt-bindings: usb: Introduce usb-hub.yamlPin-yen Lin1-0/+84
Introduce a general USB hub binding that describes downstream ports and hard wired USB devices for on-board USB hubs. Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250422082957.2058229-2-treapking@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-28Merge 6.15-rc4 into usb-nextGreg Kroah-Hartman3-3/+0
We need the USB fixes in here as well, and this resolves the following merge conflicts that were reported in linux-next: drivers/usb/chipidea/ci_hdrc_imx.c drivers/usb/host/xhci.h Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-25dt-bindings: usb: usb-switch: Allow data-lanes property in portLuca Weiss1-1/+14
The ref /schemas/graph.yaml#/properties/port forbids extra properties which might be specified in subschemas, e.g. like in usb/fcs,fsa4480.yaml. Switch to port-base (and specify the endpoint with properties) to allow such properties. Fixes: fd2a052ccd69 ("dt-bindings: usb: add common Type-C USB Switch schema") Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20250425-fp5-pmic-glink-dp-v3-1-cc9c2aeb42fb@fairphone.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-25dt-bindings: usb: generic-ehci: Add VIA/WonderMedia compatibleAlexey Charkov1-0/+1
VIA/WonderMedia SoCs use a plain vanilla EHCI controller with a compatible string "via,vt8500-ehci". This compatible is already used by the mainline Linux driver and relevant in-tree DTS files, so add it to the binding. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Alexey Charkov <alchark@gmail.com> Link: https://lore.kernel.org/r/20250425-vt8500-ehci-binding-v2-1-b4a350335add@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-25dt-bindings: usb: usb-device: relax compatible pattern to a containsQuentin Schulz1-1/+2
The dt-core typically allows multiple compatibles[1] but usb-device currently forces a single compatible. This is an issue when multiple devices with slightly different productID all behave the same. This would require the driver to keep updating its compatible matching table to include this new productID instead of doing what is usually done: have two compatibles, the leftmost which matches exactly the HW device definition, and the rightmost one as a fallback which is assumed to be 100% compatible with the device at hand. If this assumption turns out to be wrong, it is easy to work around this without having to modify the device tree by handling the leftmost compatible in the driver. [1] https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/dt-core.yaml#L21-L25 Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250418-dt-binding-usb-device-compatibles-v2-1-b3029f14e800@cherry.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-25dt-bindings: usb: renesas,usbhs: Add RZ/V2H(P) SoC supportLad Prabhakar1-5/+2
Document the Renesas USBHS controller found on the Renesas RZ/V2H(P) SoC. The USBHS block on RZ/V2H(P) is functionally identical to the one on the RZ/G2L family, so no driver changes are needed. The existing "renesas,rzg2l-usbhs" fallback compatible will continue to be used for handling this IP. In addition, update the schema validation logic by replacing the enum list of SoC-specific compatibles with a const "renesas,rzg2l-usbhs" as all listed SoCs share identical USBHS hardware and already include the fallback compatible. This will help to simplify the schema and avoid redundancy. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250414165201.362262-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-15dt-bindings: usb: Introduce qcom,snps-dwc3Bjorn Andersson2-1/+634
The Qualcomm USB glue is not separate of the Synopsys DWC3 core and several of the snps,dwc3 properties (such as clocks and reset) conflicts in expectation with the Qualcomm integration. Using the newly split out Synopsys DWC3 core properties, describe the Qualcomm USB block in a single block. The new binding is a copy of qcom,dwc3 with the needed modifications. It would have been convenient to retain the two structures with the same compatibles, but as there exist no way to select a binding based on the absence of a subnode/patternProperty, a new generic compatible is introduced to describe this binding. To avoid redefining all the platform-specific compatibles, "select" is used to tell the DeviceTree validator which binding to use solely on the generic compatible. (Otherwise if the specific compatible matches during validation, the generic one must match as well) Mark qcom,dwc3 deprecated, to favor expressing future platforms using the new combined binding. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250414-dwc3-refactor-v7-2-f015b358722d@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-15dt-bindings: usb: samsung,exynos-dwc3: add exynos2200 compatibleIvaylo Ivanov1-0/+14
The Exynos2200 SoC has a DWC3 compatible USB controller and can reuse the existing Exynos glue. Update the dt schema to include the samsung,exynos2200-dwusb3 compatible for it. Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250412203313.738429-2-ivo.ivanov.ivanov1@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11dt-bindings: usb: usbmisc-imx: add support for i.MX95 platformXu Yang1-1/+22
Add compatible string "fsl,imx95-usbmisc" for i.MX95 platform and restriction on reg property. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20250318150908.1583652-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11dt-bindings: usb: chipidea: Add i.MX95 compatible string 'fsl,imx95-usb'Xu Yang2-1/+26
The i.MX95 USB2.0 controller is mostly compatible with i.MX7D, except it requires a second interrupt for wakeup handling. Add the compatible string for the i.MX95 platform, add the iommus property, and enforce the interrupt property restriction. Keep the same restriction for existing compatible strings. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20250318150908.1583652-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11dt-bindings: usb: smsc,usb3503: Correct indentation and style in DTS exampleKrzysztof Kozlowski1-45/+45
DTS example in the bindings should be indented with 2- or 4-spaces and aligned with opening '- |', so correct any differences like 3-spaces or mixtures 2- and 4-spaces in one binding. No functional changes here, but saves some comments during reviews of new patches built on existing code. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250324125142.81910-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11dt-bindings: usb: dwc3: Allow connector in USB controller nodeMatthias Schiffer1-0/+6
Allow specifying the connector directly in the USB controller node, as allow in other USB controller bindings and commonly used for "gpio-usb-b-connector". Linux already supports this without driver changes. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250325131848.127438-1-matthias.schiffer@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11dt-bindings: usb: qcom,dwc3: Add SM8750 compatibleWesley Cheng1-0/+3
SM8750 uses the Synopsys DWC3 controller. Add this to the compatibles list to utilize the DWC3 QCOM and DWC3 core framework. Other than a revision bump to DWC3 controller rev2.00a, the controller on SM8750 does not add any additional vendor specific features compared to previous chipsets. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250409-sm8750_usb_master-v4-3-6ec621c98be6@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-07dt-bindings: xilinx: Remove myself from maintainershipMubin Sayyed3-3/+0
As I am leaving AMD and will no longer be maintaining these platform drivers, so removing myself from maintainership. Signed-off-by: Mubin Sayyed <mubin.sayyed@amd.com> Acked-by: Damien Le Moal <dlemoal@kernel.org> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20250403060836.2602361-1-mubin.sayyed@amd.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2026-01-10 09:34:40 +0000