summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/microchip
AgeCommit message (Collapse)AuthorLines
2026-02-10Merge tag 'soc-dt-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds-94/+412
Pull SoC devicetree updates from Arnd Bergmann: "There are a handful of new SoCs this time, all of these are more or less related to chips in a wider family: - SpacemiT Key Stone K3 is an 8-core risc-v chip, and the first widely available RVA23 implementation. Note that this is entirely unrelated with the similarly named Texas Instruments K3 chip family that follwed the TI Keystone2 SoC. - The Realtek Kent family of SoCs contains three chip models rtd1501s, rtd1861b and rtd1920s, and is related to their earlier Set-top-box and NAS products such as rtd1619, but is built on newer Arm Cortex-A78 cores. - The Qualcomm Milos family includes the Snapdragon 7s Gen 3 (SM7635) mobile phone SoC built around Armv9 Kryo cores of the Arm Cortex-A720 generation. This one is used in the Fairphone Gen 6 - Qualcomm Kaanapali is a new SoC based around eight high performance Oryon CPU cores - NXP i.MX8QP and i.MX952 are both feature reduced versions of chips we already support, i.e. the i.MX8QM and i.MX952, with fewer CPU cores and I/O interfaces. As part of a cleanup, a number of SoC specific devicetree files got removed because they did not have a single board using the .dtsi files and they were never compile tested as a result: Samsung s3c6400, ST spear320s, ST stm32mp21xc/stm32mp23xc/stm32mp25xc, Renesas r8a779m0/r8a779m2/r8a779m4/r8a779m6/r8a779m7/r8a779m8/r8a779mb/ r9a07g044c1/r9a07g044l1/r9a07g054l1/r9a09g047e37, and TI am3703/am3715. All of these could be restored easily if a new board gets merged. Broadcom/Cavium/Marvell ThunderX2 gets removed along with its only machine, as all remaining users are assumed to be using ACPI based firmware. A relatively small number of 43 boards get added this time, and almost all of them for arm64. Aside from the reference boards for the newly added SoCs, this includes: - Three server boards use 32-bit ASpeed BMCs - One more reference board for 32-bit Microchip LAN9668 - 64-bit Arm single-board computers based on Amlogic s905y4, CIX sky1, NXP ls1028a/imx8mn/imx8mp/imx91/imx93/imx95, Qualcomm qcs6490/qrb2210 and Rockchip rk3568/rk3588s - Carrier board for SOMs using Intel agilex5, Marvell Armada 7020, NXP iMX8QP, Mediatek mt8370/mt8390 and rockchip rk3588 - Two mobile phones using Snapdragon 845 - A gaming device and a NAS box, both based on Rockchips rk356x On top of the newly added boards and SoCs, there is a lot of background activity going into cleanups, in particular towards getting a warning-free dtc build, and the usual work on adding support for more hardware on the previously added machines" * tag 'soc-dt-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (757 commits) dt-bindings: intel: Add Agilex eMMC support arm64: dts: socfpga: agilex: add emmc support arm64: dts: intel: agilex5: Add simple-bus node on top of dma controller node ARM: dts: socfpga: fix dtbs_check warning for fpga-region ARM: dts: socfpga: add #address-cells and #size-cells for sram node dt-bindings: altera: document syscon as fallback for sys-mgr arm64: dts: altera: Use lowercase hex dt-bindings: arm: altera: combine Intel's SoCFPGA into altera.yaml arm64: dts: socfpga: agilex5: Add IOMMUS property for ethernet nodes arm64: dts: socfpga: agilex5: add support for modular board dt-bindings: intel: Add Agilex5 SoCFPGA modular board arm64: dts: socfpga: agilex5: Add dma-coherent property arm64: dts: realtek: Add Kent SoC and EVB device trees dt-bindings: arm: realtek: Add Kent Soc family compatibles ARM: dts: samsung: Drop s3c6400.dtsi ARM: dts: nuvoton: Minor whitespace cleanup MAINTAINERS: Add Falcon DB arm64: dts: a7k: add COM Express boards ARM: dts: microchip: Drop usb_a9g20-dab-mmx.dtsi arm64: dts: rockchip: Fix rk3588 PCIe range mappings ...
2026-01-23ARM: dts: microchip: Drop usb_a9g20-dab-mmx.dtsiRob Herring (Arm)-93/+0
This .dtsi file is not included anywhere in the tree and can't be tested. Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20260122202345.3387936-2-robh@kernel.org Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2026-01-09ARM: dts: Add support for pcb8385Horatiu Vultur-1/+133
Add basic support for pcb8385 [1]. It is a modular board which allows to add different daughter cards on which there are different PHYs. This adds support for UART, LEDs and I2C. [1] https://www.microchip.com/en-us/development-tool/ev83e85a Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20251208083545.3642168-3-horatiu.vultur@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2026-01-08ARM: dts: microchip: sama7d65: add missing flexcom nodesNicolas Ferre-0/+271
Add nodes for usart, spi and i2c when missing to the flexcom nodes. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20260102170135.70717-6-nicolas.ferre@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2026-01-08ARM: dts: microchip: sama7d65: add fifo-size to usartNicolas Ferre-0/+3
When missing, add the atmel,fifo-size = <32> property for usart nodes in flexcom. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20260102170135.70717-5-nicolas.ferre@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2026-01-08ARM: dts: microchip: sama7d65: add dma properties to usart6Nicolas Ferre-0/+5
Add the dma property and associated dma activation for usart6 as part of flx6 node. Is useful for usual default console on this product. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20260102170135.70717-4-nicolas.ferre@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2026-01-08ARM: dts: microchip: sama7d65: fix size-cells property for i2c3Nicolas Ferre-1/+1
Fix the #size-cells property for i2c3 node and remove the dtbs_check error telling that "#size-cells: 0 was expected" from schema atmel,at91sam-i2c.yaml and i2c-controller.yaml. Fixes: b51e4aea3ecf ("ARM: dts: microchip: sama7d65: Add FLEXCOMs to sama7d65 SoC") Cc: stable@vger.kernel.org # 6.16+ Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20260102170135.70717-3-nicolas.ferre@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2026-01-08ARM: dts: microchip: sama7d65: fix the ranges property for flx9Hari Prasath Gujulan Elango-1/+1
Update the ranges property for the flexcom9 as per the datasheet and align with the reg property. Fixes: b51e4aea3ecf ("ARM: dts: microchip: sama7d65: Add FLEXCOMs to sama7d65 SoC") Cc: stable@vger.kernel.org # 6.16+ Signed-off-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20260102170135.70717-2-nicolas.ferre@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-12-30ARM: dts: microchip: lan966x: Fix the access to the PHYs for pcb8290Horatiu Vultur-0/+1
The problem is that the MDIO controller can't detect any of the PHYs. The reason is that the lan966x is not pulling high the GPIO 53 that is connected to the PHYs reset GPIO. Without doing this the PHYs are kept in reset. The mdio controller framework has the possibility to control a GPIO to release the reset of the PHYs. So take advantage of this and set line to be high before accessing the PHYs. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20251119134750.394655-1-horatiu.vultur@microchip.com [claudiu.beznea: add microchip in patch title, s/possiblity/possibility in patch description] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-11-15ARM: dts: microchip: sama5d2: fix spi flexcom fifo size to 32Nicolas Ferre-5/+5
Unlike standalone spi peripherals, on sama5d2, the flexcom spi have fifo size of 32 data. Fix flexcom/spi nodes where this property is wrong. Fixes: 6b9a3584c7ed ("ARM: dts: at91: sama5d2: Add missing flexcom definitions") Cc: stable@vger.kernel.org # 5.8+ Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20251114140225.30372-1-nicolas.ferre@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-11-14ARM: dts: microchip: sama7g5: fix uart fifo size to 32Nicolas Ferre-2/+2
On some flexcom nodes related to uart, the fifo sizes were wrong: fix them to 32 data. Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek") Cc: stable@vger.kernel.org # 5.15+ Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20251114103313.20220-2-nicolas.ferre@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-11-14ARM: dts: microchip: sama7d65: fix uart fifo size to 32Nicolas Ferre-3/+3
On some flexcom nodes related to uart, the fifo sizes were wrong: fix them to 32 data. Note that product datasheet is being reviewed to fix inconsistency, but this value is validated by product's designers. Fixes: 261dcfad1b59 ("ARM: dts: microchip: add sama7d65 SoC DT") Fixes: b51e4aea3ecf ("ARM: dts: microchip: sama7d65: Add FLEXCOMs to sama7d65 SoC") Cc: stable@vger.kernel.org # 6.16+ Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20251114103313.20220-1-nicolas.ferre@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-10-01Merge tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds-2/+89
Pull SoC dt updates from Arnd Bergmann: "There are five sets of new SoCs that get added in existing families, all of them being either upgrades or cut-down versions of the older chips: - Apple M2 Pro, M2 Max and M2 Ultra, used in the 2022/2023 generation of high-end workstations and laptops from Apple. Linux has been working on these for a while but stil requires patches. - Axis Artpec8 is an Armv8 chip based on Samsung Exynos design, unlike the earlier Armv7 Artpec6 from the same company that was part of a separate family of chips. - NXP i.MX91 is a cut-down version of i.MX93, using only a single Cortex-A55 core. - Qualcomm Lemans Auto is a variant of the Lemans SoC that was originally merged under the sa8775p name, the differences being mostly the firmware configuration of the platform. - Four new Renesas SoCs RZ/T2H (r9a09g077m44), RZ/N2H (r9a09g087m44), RZ/T2H (r9a09g077), and RZ/N2H (r9a09g087) are all industrial bedded SoCs based on Cortex-A55 cores In total, there are 65 new machines, including: - Industrial embedded system and single-board computers based on NXP, Allwinner, TI, Rockchips, Marvell, Xilinx Spacemit, Starfive chips. - Reference boards for the newly added Renesas, Qualcomm, NXP and Axis ARMv8 chips as well as Microchip's MPFS RISC-V SoC - Laptops and Workstations using Apple M2 and Qualcomm Snapdragon X1 chips. - Several Samsung phones using Qualcomm Snapdragon chips - Set-top boxes based on Allwinner H313 - Five BMC boards using 32-bit ASpeed SoCs - Three network routers using IXP4xx (ARMv5!) and Broadcom bcm4708 (ARMv7) SoCs Two machines get phased out because they were available only in small quantities but never made it into products: one STi407 based reference board, and a Snapdragon 845 based Chromebook. Aside from the newly added machines, a lot of work went into improving hardware support on the existing machines and cleaning up contents for validation" * tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (931 commits) arm64: dts: apm-shadowcat: Drop "apm,xgene2-pcie" compatible arm64: dts: apm-shadowcat: Move slimpro nodes out of "simple-bus" node ARM: dts: microchip: sam9x7: Add qspi controller arm64: dts: qcom: Add MST pixel streams for displayport arm64: dts: qcom: sm6350: correct DP compatibility strings arm64: dts: qcom: monaco-evk: Enable Adreno 623 GPU arm64: dts: qcom: qcs8300-ride: Enable Adreno 623 GPU arm64: dts: qcom: qcs8300: Add gpu and gmu nodes arm64: dts: allwinner: h313: Add Amediatech X96Q dt-bindings: arm: sunxi: Add Amediatech X96Q arm64: dts: apple: t8015: Add SPMI node arm64: dts: apple: t8012: Add SPMI node arm64: dts: apple: Add J180d (Mac Pro, M2 Ultra, 2023) device tree arm64: dts: rockchip: Add devicetree for the ROC-RK3588-RT dt-bindings: arm: rockchip: Add Firefly ROC-RK3588-RT arm64: dts: rockchip: update pinctrl names for Radxa E52C arm64: dts: rockchip: remove vcc_3v3_pmu regulator for Radxa E52C arm64: dts: apple: Add J474s, J475c and J475d device trees arm64: dts: apple: Add J414 and J416 Macbook Pro device trees arm64: dts: apple: Add initial t6020/t6021/t6022 DTs ...
2025-09-22ARM: dts: microchip: sam9x7: Add qspi controllerDharma Balasubiramani-0/+21
Add support for QSPI controller. Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com> Link: https://lore.kernel.org/r/20250915-sam9x7-qspi-dtsi-v1-1-1cc9adba7573@microchip.com Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2025-09-03ARM: dts: microchip: sama7d65: Force SDMMC Legacy modeRyan Wanner-0/+2
The SDMMC in this IP currently only supports legacy mode due to a hardware quirk, setting the flags to reflect the limitation. Fixes: deaa14ab6b06 ("ARM: dts: microchip: add support for sama7d65_curiosity board") Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20250819170528.126010-1-Ryan.Wanner@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2025-08-30ARM: dts: microchip: sama7d65: add uart3 definition for flexcom3 peripheralNicolas Ferre-0/+15
Add the definition of uart3 at the side of i2c3 for flexcom3. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Ryan Wanner <ryan.wanner@microchip.com> Link: https://lore.kernel.org/r/20250905092044.25429-1-nicolas.ferre@microchip.com [claudiu.beznea: moved atmel,usart-mode at the end of the node to comply with dts coding style] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-09-22ARM: dts: microchip: sama7d65: Add GPIO buttons and LEDsRyan Wanner-0/+51
Add the USER button as a GPIO input as well as add the LEDs and enable the blue LED as a heartbeat. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/20250917210409.503830-1-Ryan.Wanner@microchip.com Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2025-08-22ARM: dts: microchip: Minor whitespace cleanupKrzysztof Kozlowski-2/+2
The DTS code coding style expects exactly one space around '=' or '{' characters. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20250819131736.86862-2-krzysztof.kozlowski@linaro.org Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-07-05ARM: dts: microchip: sama7g5: Add cache configuration for cpu nodeMihai Sain-0/+10
Describe the cache memories according with datasheet chapter 15.2: - L1 cache configuration with 32KB for both data and instruction cache. - L2 cache configuration with 256KB unified cache. Before this patch the kernel reported the warning: [ 0.171425] cacheinfo: Unable to detect cache hierarchy for CPU 0 Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Link: https://lore.kernel.org/r/20250619070636.8844-3-mihai.sain@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-07-05ARM: dts: microchip: sama7d65: Add cache configuration for cpu nodeMihai Sain-0/+10
Describe the cache memories according with datasheet chapter 15.2: - L1 cache configuration with 32KB for both data and instruction cache. - L2 cache configuration with 256KB unified cache. Before this patch the kernel reported the warning: [ 0.161955] cacheinfo: Unable to detect cache hierarchy for CPU 0 Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Link: https://lore.kernel.org/r/20250619070636.8844-2-mihai.sain@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-07-05ARM: dts: microchip: sama5d4: Update the cache configuration for CPUMihai Sain-0/+3
Add the memory size properties for L1 and L2 according with block diagram from datasheet: - L1 cache configuration with 32 KB for both data and instruction cache. - L2 cache configuration with 128 KB unified cache. [root@sama5d4 ~]$ lscpu Architecture: armv7l Byte Order: Little Endian CPU(s): 1 On-line CPU(s) list: 0 Vendor ID: ARM Model name: Cortex-A5 Caches (sum of all): L1d: 32 KiB (1 instance) L1i: 32 KiB (1 instance) L2: 128 KiB (1 instance) Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Link: https://lore.kernel.org/r/20250625064934.4828-4-mihai.sain@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-07-05ARM: dts: microchip: sama5d3: Update the cache configuration for CPUMihai Sain-0/+2
Add the memory size properties for L1 according with block diagram from datasheet: - L1 cache configuration with 32 KB for both data and instruction cache. [root@sama5d3 ~]$ lscpu Architecture: armv7l Byte Order: Little Endian CPU(s): 1 On-line CPU(s) list: 0 Vendor ID: ARM Model name: Cortex-A5 Caches (sum of all): L1d: 32 KiB (1 instance) L1i: 32 KiB (1 instance) Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Link: https://lore.kernel.org/r/20250625064934.4828-3-mihai.sain@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-07-05ARM: dts: microchip: sama5d2: Update the cache configuration for CPUMihai Sain-0/+3
Add the memory size properties for L1 and L2 according with block diagram from datasheet: - L1 cache configuration with 32 KB for both data and instruction cache. - L2 cache configuration with 128 KB unified cache. [root@sama5d2 ~]$ lscpu Architecture: armv7l Byte Order: Little Endian CPU(s): 1 On-line CPU(s) list: 0 Vendor ID: ARM Model name: Cortex-A5 Caches (sum of all): L1d: 32 KiB (1 instance) L1i: 32 KiB (1 instance) L2: 128 KiB (1 instance) Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Link: https://lore.kernel.org/r/20250625064934.4828-2-mihai.sain@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-06-25ARM: dts: microchip: sam9x7: Add LVDS controllerDharma Balasubiramani-0/+9
Add support for LVDS controller. Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com> Link: https://lore.kernel.org/r/20250625-b4-sam9x7-dts-v1-1-92aaee14ed16@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-06-24ARM: dts: microchip: sama5d2_icp: rename spi-cs-setup-ns property to ↵Manikandan Muralidharan-1/+1
spi-cs-setup-delay-ns The naming scheme for delay properties includes "delay" in the name, so renaming spi-cs-setup-ns property to spi-cs-setup-delay-ns. Fixes: 46a8a137d8f6 ("ARM: dts: at91: sama5d2_icp: Set sst26vf064b SPI NOR flash at its maximum frequency") Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Link: https://lore.kernel.org/r/20250521054309.361894-4-manikandan.m@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-06-24ARM: dts: microchip: sama5d27_wlsom1: rename spi-cs-setup-ns property to ↵Manikandan Muralidharan-1/+1
spi-cs-setup-delay-ns The naming scheme for delay properties includes "delay" in the name, so renaming spi-cs-setup-ns property to spi-cs-setup-delay-ns. Fixes: 417e58ea41ab ("ARM: dts: at91-sama5d27_wlsom1: Set sst26vf064b SPI NOR flash at its maximum frequency") Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Link: https://lore.kernel.org/r/20250521054309.361894-3-manikandan.m@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-06-24ARM: dts: microchip: sama5d27_som1: rename spi-cs-setup-ns property to ↵Manikandan Muralidharan-1/+1
spi-cs-setup-delay-ns The naming scheme for delay properties includes "delay" in the name, so renaming spi-cs-setup-ns property to spi-cs-setup-delay-ns. Fixes: 09ce8651229b ("ARM: dts: at91-sama5d27_som1: Set sst26vf064b SPI NOR flash at its maximum frequency") Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com> Reviewed-by: Alexander Dahl <ada@thorsis.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Link: https://lore.kernel.org/r/20250521054309.361894-2-manikandan.m@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-06-24ARM: dts: microchip: sam9x60ek: rename spi-cs-setup-ns property to ↵Manikandan Muralidharan-1/+1
spi-cs-setup-delay-ns The naming scheme for delay properties includes "delay" in the name, so renaming spi-cs-setup-ns property to spi-cs-setup-delay-ns. Fixes: 2c0a1faa4da5 ("ARM: dts: at91: sam9x60ek: Set sst26vf064b SPI NOR flash at its maximum frequency") Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com> Reviewed-by: Alexander Dahl <ada@thorsis.com> Link: https://lore.kernel.org/r/20250521054309.361894-1-manikandan.m@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-06-22ARM: dts: at91-sama5d27_wlsom1: Improve the Wifi compatibleFabio Estevam-1/+1
The at91-sama5d27_wlsom1 SoM has a WIL3000 Wifi SDIO device populated. Improve the description of the Wifi compatible string by passing the more specific "microchip,wilc3000" string. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Link: https://lore.kernel.org/r/20250617140502.1042812-1-festevam@gmail.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-06-22ARM: dts: microchip: gardena-smart-gateway: Fix power LEDEzra Buehler-1/+1
When starting up, the GARDENA smart Gateway's power LED should be flashing green. It is unclear why this has not been done earlier. The LED frequency cannot be configured in the devicetree. Luckily, the default is 1 Hz, which is what we want. Signed-off-by: Ezra Buehler <ezra.buehler@husqvarnagroup.com> Link: https://lore.kernel.org/r/20250612074737.311346-1-ezra@easyb.ch Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-06-22ARM: dts: microchip: sam9x7: Add clock name propertyRyan Wanner-0/+2
Add clock-output-names to the xtal nodes, so the driver can correctly register the main and slow xtal. This fixes the issue of the SoC clock driver not being able to find the main xtal and slow xtal correctly causing a bad clock tree. Fixes: 41af45af8bc3 ("ARM: dts: at91: sam9x7: add device tree for SoC") Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/036518968ac657b93e315bb550b822b59ae6f17c.1750175453.git.Ryan.Wanner@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-06-22ARM: dts: microchip: sama7d65: Add clock name propertyRyan Wanner-0/+2
Add clock-output-names to the xtal nodes, so the driver can correctly register the main and slow xtal. This fixes the issue of the SoC clock driver not being able to find the main xtal and slow xtal correctly causing a bad clock tree. Fixes: 261dcfad1b59 ("ARM: dts: microchip: add sama7d65 SoC DT") Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/3878ae6d0016d46f0c91bd379146d575d5d336aa.1750175453.git.Ryan.Wanner@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-06-22ARM: dts: microchip: sama7g5: Adjust clock xtal phandleRyan Wanner-13/+14
Adjust clock xtal phandles to match the new xtal phandle formatting. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/8a9ece664958d07b1be73b4b6676a2a2ee397a94.1750175453.git.Ryan.Wanner@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-06-22ARM: dts: microchip: sam9x7: Add HLCD controllerDharma Balasubiramani-0/+26
Add support for HLCD controller. Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com> Link: https://lore.kernel.org/r/20250611-sam9x7-dts-v1-1-7f52fcb488ad@microchip.com [claudiu.beznea: keep reg the 1st property on port@0 to comply with dts coding style] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-06-22ARM: dts: microchip: sama7d65: Enable CAN busRyan Wanner-0/+36
Enable CAN bus for SAMA7D65 curiosity board. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Link: https://lore.kernel.org/r/ab719861de53432bdf19593fa4eee40adf57aed9.1749666053.git.Ryan.Wanner@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-06-22ARM: dts: microchip: sama7d65: Clean up extra spaceRyan Wanner-1/+0
Remove the extra space that causes formatting issues. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/ac1decc35e2b4f706cf6ab9378f2c88e5295dde4.1749666053.git.Ryan.Wanner@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-06-22ARM: dts: microchip: sama7d65: Add CAN bus supportRyan Wanner-0/+80
Add support for CAN bus to the SAMA7D65 SoC. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Link: https://lore.kernel.org/r/f80a4206c05ed5d80a9527476963a18070ca42b6.1749666053.git.Ryan.Wanner@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-06-22ARM: dts: microchip: sama7d65: Add PWM supportRyan Wanner-0/+9
Add support for PWMs to the SAMA7D65 SoC. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Link: https://lore.kernel.org/r/195c69a19be1ff14736db402e0f1ee64438b4b20.1749666053.git.Ryan.Wanner@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-06-22ARM: dts: microchip: sama7d65: Add crypto supportRyan Wanner-0/+39
Add and enable SHA, AES, TDES, and TRNG for SAMA7D65 SoC. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Link: https://lore.kernel.org/r/fc791949c97f368f32a710e64d8db4018e45e70f.1749666053.git.Ryan.Wanner@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-06-22ARM: dts: microchip: use recent scl/sda gpio bindingsWolfram Sang-30/+22
We have dedictaded bindings for scl/sda nowadays. Switch away from the deprecated plain 'gpios' property. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> Link: https://lore.kernel.org/r/20250519112107.2980-4-wsa+renesas@sang-engineering.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-05-16ARM: dts: microchip: sama7g54_curiosity: Add fixed-partitions for spi-nor flashMihai Sain-0/+32
Add fixed-partitions for spi-nor flash to match the at91 boot flow and layout of the nand flash. Partitions can be listed from /proc/mtd: [root@sama7g54 ~]$ cat /proc/mtd | grep qspi mtd6: 00040000 00001000 "qspi1: at91bootstrap" mtd7: 00100000 00001000 "qspi1: u-boot" mtd8: 00040000 00001000 "qspi1: u-boot env" mtd9: 00080000 00001000 "qspi1: device tree" mtd10: 00600000 00001000 "qspi1: kernel" [root@sama7g54 ~]$ mtdinfo /dev/mtd10 mtd10 Name: qspi1: kernel Type: nor Eraseblock size: 4096 bytes, 4.0 KiB Amount of eraseblocks: 1536 (6291456 bytes, 6.0 MiB) Minimum input/output unit size: 1 byte Sub-page size: 1 byte Character device major/minor: 90:20 Bad blocks are allowed: false Device is writable: true Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Link: https://lore.kernel.org/r/20250429064547.5807-1-mihai.sain@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-05-16ARM: dts: microchip: sama7d65: Add RTT timer to curiosity boardRyan Wanner-0/+4
Add RTT timer with backup register for SAMA7D65_Curiosity board. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/463581224a07bf122c6907d34a0c5c71b1cc73e1.1744666011.git.Ryan.Wanner@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-05-16ARM: dts: microchip: sama7d65: Add RTT and GPBR Support for sama7d65 SoCRyan Wanner-0/+12
Add RTT support for SAMA7D65 SoC. The GPBR is added so the SoC is able to store the RTT time data. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/e8868ef06102241b47883ba10edaed751831be6d.1744666011.git.Ryan.Wanner@microchip.com [claudiu.beznea: keep nodes sorted by their address] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-05-16ARM: dts: microchip: sama7d65: Add SRAM and DRAM components supportRyan Wanner-0/+35
Add SRAM, secumod, UDDRC, and DDR3phy to enable support for low power modes. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/354ecd628fdd292d2125570a6b10a93cbecb7706.1744666011.git.Ryan.Wanner@microchip.com [claudiu.beznea: keep nodes sorted by their address] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-05-16ARM: dts: microchip: sama7d65_curiosity: add EEPROMRyan Wanner-0/+20
If the MAC address is not fetched and loaded by U-boot then Linux will have to load the address. The EEPROM and nvmem-layout to describe EUI48 MAC address regions. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/96ee6832d9b55acfae8d3560f625798025dfd89c.1743523114.git.Ryan.Wanner@microchip.com [claudiu.beznea: added nvmem properties in gmac0 node before the status one] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-05-16ARM: dts: microchip: sama7d65: Add MCP16502 to sama7d65 curiosityRyan Wanner-0/+134
Add MCP16502 to the sama7d65_curiosity board to control voltages in the MPU. The device is connected to twi 10 interface Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/60f6b7764227bb42c74404e8ca1388477183b7b5.1743523114.git.Ryan.Wanner@microchip.com [claudiu.beznea: drop regulator-suspend-voltage for ldo2 as it is not needed] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-05-16ARM: dts: microchip: sama7d65: Enable GMAC interfaceRyan Wanner-0/+51
Enable GMAC0 interface for sama7d65_curiosity board. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/fca0c1deb74006cdedbdd71061dec9dabf1e9b9a.1743523114.git.Ryan.Wanner@microchip.com [claudiu.beznea: move gmac0 node to keep the nodes alphanumerically sorted, dropped status property on the PHY node, added missing blank line] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-05-16ARM: dts: microchip: sama7d65: Add FLEXCOMs to sama7d65 SoCRyan Wanner-0/+267
Add FLEXCOMs to the SAMA7D65 SoC device tree. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/d474fcd850978261ac889950ac1c3a36bc6d3926.1743523114.git.Ryan.Wanner@microchip.com [claudiu.beznea: use vendor specific properties at the end of the node, align DMA entries, add missing spaces] Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-05-16ARM: dts: microchip: sama7d65: Add gmac interfaces for sama7d65 SoCRyan Wanner-0/+32
Add support for GMAC interfaces on SAMA7D65 SoC. Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> Link: https://lore.kernel.org/r/05b107796b6f3a173d0dd0a5b2107b675cfd994e.1743523114.git.Ryan.Wanner@microchip.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-04-11ARM: dts: at91: at91sam9263: fix NAND chip selectsWolfram Sang-3/+3
NAND did not work on my USB-A9263. I discovered that the offending commit converted the PIO bank for chip selects wrongly, so all A9263 boards need to be fixed. Fixes: 1004a2977bdc ("ARM: dts: at91: Switch to the new NAND bindings") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20250402210446.5972-2-wsa+renesas@sang-engineering.com Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
generated by cgit v1.2.3 (git 2.46.0) at 2026-03-18 10:50:55 +0000