| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Some nodes are abusingly referencing some of the internal bus clocks,
that were recently removed in Linux (because the original implementation
did not make much sense), managing them as if they were the only devices
on an NoC bus.
These clocks are now handled from within the icc framework and are
no longer registered from within the CCF. Remove them.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # fairphone-fp2
Tested-by: Alexandre Messier <alex@me.ssier.org>
Link: https://lore.kernel.org/r/20260324-msm8974-icc-v2-9-527280043ad8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
APQ8084 is one of the platforms which gained very little interest
upstream. It doesn't look like the there was any interest in these
devices since December 2019. Two devices supported upstream have very
minumal DT files. Start forgetting about the platform by
removing DT files.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260325-drop-8084-dt-v1-1-a0255a404355@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
These .dtsi files are not included anywhere in the tree and can't be
tested.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251212203226.458694-2-robh@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use generic RPMPD_* defines for power domain instead of using
platform-specific defines.
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251211-rework-rpmhpd-rpmpd-v2-2-a5ec4028129f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the Bosch Accelerometer.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Link: https://lore.kernel.org/r/20251124-expressatt_nfc_accel_magn_light-v4-6-9c5686ad67e2@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the Yamaha magnetometer. Mount Matrix is left as a TODO.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Link: https://lore.kernel.org/r/20251124-expressatt_nfc_accel_magn_light-v4-4-9c5686ad67e2@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add pn544 NFC chip
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Link: https://lore.kernel.org/r/20251124-expressatt_nfc_accel_magn_light-v4-3-9c5686ad67e2@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Currently the Proximity Sensor doesn't work, but light sensor does.
Left the proximity sensor as a TODO for later.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Link: https://lore.kernel.org/r/20251124-expressatt_nfc_accel_magn_light-v4-2-9c5686ad67e2@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the GSBI2 & GSBI7 Node, which is similar to the
other GSBI nodes in this file.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Link: https://lore.kernel.org/r/20251124-expressatt_nfc_accel_magn_light-v4-1-9c5686ad67e2@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Due to historical reasons all msm8974 boards have used the CX power rail
as regulator instead of going through the power domain framework.
Since rpmpd has gained msm8974 support quite a bit ago, let's start
using it and replace all usages of pm8841_s2 (CX), pm8841_s4 (GFX) and
for the boards using pma8084 pma8084_s2 (CX), pma8084_s7 (GFX).
For reference, downstream is using GFX power rail as parent-supply for
mmcc's OXILI_GDSC GDSC which then is used for GPU, but nothing there is
modelled upstream.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250621-msm8974-rpmpd-switch-v1-4-0a2cb303c446@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Before adding more headers in a random order, let's sort the includes
once so that's done.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250621-msm8974-rpmpd-switch-v1-3-0a2cb303c446@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Many years have passed (more than 9 actually) since the introduction of
the Nexus 5 dts to Linux and it's high time to update the model property
to be a proper model name and thereby bringing it to the standards of
the 2020s.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20251208-msm8974-hammerhead-model-v1-1-88975f30cbaa@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add simple-framebuffer, necessary power-domains and clocks for ms013g.
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20251011185750.743615-1-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Rename the GPIO controller node from "msmgpio" to "tlmm" to match the
convention used by other Qualcomm SoCs.
Suggested-by: Shinjo Park <peremen@gmail.com>
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250921-msm8960-reorder-v2-5-26c478366d21@smankusors.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
These are present on msm8960 and are required for devices such as the
Casio G'zOne, which has NFC wired to gsbi1 and audio amplifier wired to
gsbi8.
The nodes are added disabled by default.
Co-developed-by: Shinjo Park <peremen@gmail.com>
Signed-off-by: Shinjo Park <peremen@gmail.com>
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250921-msm8960-reorder-v2-4-26c478366d21@smankusors.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
These are present on msm8960 and are required for devices such as the
Sony Xperia SP, which has NFC wired to gsbi10 and various motion
sensors wired to gsbi12.
The nodes are added disabled by default.
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250921-msm8960-reorder-v2-3-26c478366d21@smankusors.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Inline qcom-msm8960-pins.dtsi into the main SoC dtsi. Most Qualcomm
SoCs embed their TLMM definitions directly, with only msm8960 and
apq8064 using a separate pins file. After this change, only apq8064
remains split.
This is a cosmetic change only, with no functional impact.
Tested-by: Rudraksha Gupta <guptarud@gmail.com>
Tested-by: Shinjo Park <peremen@gmail.com>
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250921-msm8960-reorder-v2-2-26c478366d21@smankusors.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Reorder the nodes in qcom-msm8960.dtsi by unit address and sort
properties, as recommended in the Devicetree style guide. This is a
cosmetic change only, with no functional impact.
Tested-by: Rudraksha Gupta <guptarud@gmail.com>
Tested-by: Shinjo Park <peremen@gmail.com>
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250921-msm8960-reorder-v2-1-26c478366d21@smankusors.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Decoding interrupt-map is tricky, because it consists of five
components. Use known GIC_SPI define in final interrupt specifier
component makes easier to read.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250822-dts-interrupt-address-cells-v1-15-d54d44b74460@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
qcom-sdx55.dtsi:343.4-346.30: Warning (interrupt_map): /soc/pcie@1c00000:interrupt-map:
Missing property '#address-cells' in node /soc/interrupt-controller@17800000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250822-dts-interrupt-address-cells-v1-14-d54d44b74460@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
qcom-ipq8064.dtsi:1201.4-1204.29: Warning (interrupt_map): /soc/pcie@1b900000:interrupt-map:
Missing property '#address-cells' in node /soc/interrupt-controller@2000000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250822-dts-interrupt-address-cells-v1-13-d54d44b74460@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
qcom-apq8064.dtsi:1353.4-1356.29: Warning (interrupt_map): /soc/pcie@1b500000:interrupt-map:
Missing property '#address-cells' in node /soc/interrupt-controller@2000000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250822-dts-interrupt-address-cells-v1-12-d54d44b74460@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
qcom-ipq4019.dtsi:431.4-434.30: Warning (interrupt_map): /soc/pcie@40000000:interrupt-map:
Missing property '#address-cells' in node /soc/interrupt-controller@b000000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250822-dts-interrupt-address-cells-v1-11-d54d44b74460@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The DTS code coding style expects exactly one space around '=' or '{'
characters.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250819131717.86713-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Touch keys feature on Galaxy Grand 2 is provided by Zinitix touchscreen.
Add property linux,keycodes to enable touch keys.
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250708122118.157791-1-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for the touchkeys on the Samsung Galaxy Note 3 (hlte).
Signed-off-by: Adam Honse <calcprogrammer1@gmail.com>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250618-hlte-touchkey-v2-1-2cf188b57e31@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use the same definition as pm8058.dtsi. Since vibrator is used only by
some devices, disable it by default and let it be enabled explicitly.
Signed-off-by: Shinjo Park <peremen@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250613194253.20080-1-peremen@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add initial device tree support for the Sony Xperia SP (codename:
sony-huashan), a smartphone based on the Qualcomm MSM8960T SoC.
There are two variants of the Xperia SP, one without LTE and one with
LTE. This device tree should work for both variants, though it has only
been tested on the non-LTE variant.
The following are currently supported:
- Serial console support via gsbi8
- GPIO keys for volume up/down buttons
- PM8921 keypad with camera focus/capture keys
- eMMC (sdcc1) and micro SD card (sdcc3) support
- USB OTG support
Other hardware features are not yet implemented.
Booting notes:
Booting a kernel requires using the Sony ELF boot image format, which
embeds the kernel, ramdisk, RPM firmware, and cmdline. This can be
created using the `mkelf` tool. For example:
python2 mkelf.py -o boot.img \
kernel+dtb@0x80208000 \
ramdisk.img@0x81900000 \
RPM.bin@0x00020000,rpm \
cmdline.txt@cmdline
The resulting `boot.img` can then be flashed via fastboot. A detailed
guide, including an alternative method, is available at:
https://wiki.postmarketos.org/wiki/Sony_Xperia_SP_(sony-huashan)
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250623-msm8960-sdcard-v2-5-340a5e8f7df0@smankusors.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Not all devices use gsbi1 and gsbi5, so these nodes should be disabled
in the SoC dtsi, following the existing pattern used for gsbi3. The
upstream samsung-expressatt and msm8960-cdp devices already have status
"okay" for these nodes, so this change should not break existing
functionality.
This eliminates the following error messages when gsbi nodes are not
configured in the board's device tree:
[ 1.109723] gsbi 16000000.gsbi: missing mode configuration
[ 1.109797] gsbi 16000000.gsbi: probe with driver gsbi failed with error -22
(Note: Xperia SP doesn't use gsbi5)
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250623-msm8960-sdcard-v2-3-340a5e8f7df0@smankusors.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The LTE variant of the MSM8960 SoC has a gsbi8 node used for the
serial console.
That's if the downstream kernel is to be believed, as Xperia SP has
a serial console on gsbi8 even on the non-LTE variant.
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250623-msm8960-sdcard-v2-2-340a5e8f7df0@smankusors.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Adds sdcc3-default-state and sdcc3-sleep-state pinctrl states for
MSM8960. These are required for devices like Sony Xperia SP to ensure
micro SD card functionality, though they are a no-op on the Samsung
Galaxy Express.
Tested-by: Rudraksha Gupta <guptarud@gmail.com>
Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250623-msm8960-sdcard-v2-1-340a5e8f7df0@smankusors.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add an alias for the internal storage so it always becomes mmcblk0 and
SD card becomes mmcblk1.
This avoids issues with internal storage becoming mmcblk1 unexpectedly
and aligns this board with other boards that use MMC storage.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Link: https://lore.kernel.org/r/20250610-msm8974-mmc-alias-v2-3-1d8808478fba@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add an alias for the internal storage so it always becomes mmcblk0.
This avoids issues with internal storage becoming mmcblk1 unexpectedly
and aligns this board with other boards that use MMC storage.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Link: https://lore.kernel.org/r/20250610-msm8974-mmc-alias-v2-2-1d8808478fba@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add an alias for the internal storage so it always becomes mmcblk0.
This avoids issues with internal storage becoming mmcblk1 unexpectedly
and aligns this board with other boards that use MMC storage.
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Link: https://lore.kernel.org/r/20250610-msm8974-mmc-alias-v2-1-1d8808478fba@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the dts for the Z Ultra. This is currently almost the same as Z1
Compact (amami) and Z1 (honami) as they share almost the same hardware.
Only USB Networking and volume button are confirmed working.
Signed-off-by: Kevin Widjaja <kevin.widjaja21@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Link: https://lore.kernel.org/r/20250610-togari-v2-4-10e7b53b87c1@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
An upcoming board in the sony-xperia-rhine family (sony-togari) does not
have dedicated camera buttons, so move those from common rhine dtsi to
amami and honami dts files.
Signed-off-by: Kevin Widjaja <kevin.widjaja21@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Link: https://lore.kernel.org/r/20250610-togari-v2-2-10e7b53b87c1@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Set usb-charge-current-limit to enable charging over USB for all
sony-rhine devices.
Signed-off-by: Kevin Widjaja <kevin.widjaja21@gmail.com>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250610-togari-v2-1-10e7b53b87c1@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Replace the raw values with macros. No changes to the output
Tested-by: Rudraksha Gupta <guptarud@gmail.com>
Signed-off-by: Max Shevchenko <wctrl@proton.me>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250606-msm8960-irq-macros-v1-1-03e573ba26d6@proton.me
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Since commit 3c3606793f7e ("dt-bindings: wireless: bcm4329-fmac: Use
wireless-controller.yaml schema"), bindings expect 'wifi' as node name:
qcom-msm8974-lge-nexus5-hammerhead.dtb: bcrmf@1: $nodename:0: 'bcrmf@1' does not match '^wifi(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250424084713.105080-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
There is no need to specify separate HPD gpio for the HDMI block. Use
built-in HPD in order to detect if the monitor is plugged or not.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250209-fd-hdmi-hpd-v4-16-6224568ed87f@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Link LVDS clocks to the from MDP4 to the MMCC and back from the MMCC
to the MDP4 display controller.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250425-fd-mdp4-lvds-v4-7-6b212160b44c@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In order to fix DT schema warning and describe hardware properly, add
missing sleep clock to the timer node.
Solved by Dmitry Baryshkov on the APQ8064 SoC
Link: https://lore.kernel.org/all/20250318-fix-nexus-4-v2-6-bcedd1406790@oss.qualcomm.com/
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-expressatt-solve-dts-errors-v1-1-14012a4bc315@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The CoreSight static replicator device isn't a part of the system MMIO
bus, as such it should not be a part of the soc node. Follow the example
of other platforms and move it out of the soc bus to the top-level (and
reoder ports to follow alphabetic order).
Fixes: 7a5c275fd821 ("ARM: dts: qcom: Add apq8064 CoreSight components")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-fix-nexus-4-v2-10-bcedd1406790@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use new SoC-specific compatible to the SPS SIC in addition to the
"syscon" compatible and rename the node to follow the purpose of it.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-fix-nexus-4-v2-9-bcedd1406790@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use new SoC-specific compatible for the SFPB device node in addition to
the "syscon" compatible.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-fix-nexus-4-v2-8-bcedd1406790@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Follow up the expected way of describing the SFPB hwspinlock and merge
hwspinlock node into corresponding syscon node, fixing several dt-schema
warnings.
Fixes: 24a9baf933dc ("ARM: dts: qcom: apq8064: Add hwmutex and SMEM nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-fix-nexus-4-v2-7-bcedd1406790@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In order to fix DT schema warning and describe hardware properly, add
missing sleep clock to the timer node.
Fixes: f335b8af4fd5 ("ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410 board device trees")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-fix-nexus-4-v2-6-bcedd1406790@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Wi-Fi setup is identical to that of the Sony Xperia Z (Yuga).
Verified against the legacy kernel configuration inside
arch/arm/mach-msm/board-8064-regulator.c
using LineageOS 14.1 kernel sources.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250318-lg-nexus4-mako-enable-wifi-v1-1-e3b4a09d9f68@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The v6.15 PR contained the transition to "qcom,calibration-variant" and
was not accepted due to the risk of breaking bisection support. Merge
the arm32-for-6.15 tag in order to bring these patches into v6.16.
|
|
After some digging in downstream sources, it was found that the vddio_disp
regulator's output voltage is 1.8V. This is further confirmed by the
troubleshooting guide. Specify its output voltage as such.
While at it, add a comment specifying the IC, which according to the
schematic is the TI TPS22902.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/6143603464a65aebbed281fe6c6164316dd07269.1746711762.git.stano.jakubek@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
