| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Pull SoC devicetree updates from Arnd Bergmann:
"A number of SoC platforms are adding modernized variants of their
already supported chips time, with a total of 12 new SoCs, and two
older SoC getting removed:
- Qualcomm Glymur is a compute SoC using 18 Oryon-2 CPU cores
- Qualcomm Mahua is a variant of Glymur with only 12 CPU cores, but
largely identical.
- Qualcomm Eliza is an embeded platform for mobile phone (SM7750) and
IOT (QC7790S/M) workloads
- Qualcomm IPQ5210 is a wireless networking SoC using Cortex-A53
cores
- Qualcomm apq8084 and ipq806x had only rudimentary support but no
actual products using them, so they are now gone.
- Axis ARTPEC-9 is a follow-up to the ARTPEC-8 embedded SoC, using
the Samsung SoC platform but now with Cortex-A55 cores
- ARM Zena is a virtual platform in FVP using Cortex-A720AE cores,
with additional versions planned to be merged in the future.
- ARM corstone-1000-a320 is a reference platform for IOT, using
low-end Cortex-A320 cores
- Microchip LAN9691 is an updated 64-bit variant of the arm32 lan966x
series of networking SoCs
- Microchip PIC64GX is an embedded RISC-V chip using SIFIVE U54 CPU
cores
- Rockchip RV1103B is the low-end 32-bit single-core vision processor
- Renesas RZ/G3L (r9a08g046) is an industrial embedded chip using
Cortex-A55 cores, similar to the G3E and G3S variants we already
supported.
- NXP S32N79 is an automotive SoC using Cortex-A78AE cores, a
significant upgrade from the older S32V and S32G series
These all come with at least one reference board or an initial product
using these, in total there are 67 newly added boards. The ones for
already supported SoCs are:
- Two more Aspeed BMC based boards
- Three older tablets based on 32-bit OMAP4 and Exynos5 SoCs
- One Set-top-box based on Allwinner H6
- 22 additional industrial/embedded boards using 64-bit NXP i.MX8M or
i.MX9 SoCs
- 20 Qualcomm SoC based machines across all possible markets:
workstation, gaming, laptop, phone, networking, reference, ...
- Three more Rockchips rk35xx based boards
- Four variants of the Toradex Verdin using TI AM62
Other notable bits are:
- A cleanup for the 32-bit Tegra paz00 board moved the last board
specific code on Tegra into equivalent dts syntax.
- There continues to be a significant number of fixes for static
checking of dtc syntax, but it feels like this is slowing down,
hopefully getting into a state where most known issues are
addressed
- Additional hardware support for many existing boards across SoC
families, notably Qualcomm, Broadcom, i.MX2, i.MX6, Rockchips,
STM32, Mediatek, Tegra, TI and Microchip"
* tag 'soc-dt-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (841 commits)
arm64: dts: ti: k3: Use memory-region-names for r5f
ARM: dts: imx: Add DT overlays for DH i.MX6 DHCOM SoM and boards
ARM: dts: imx6sx: remove fallback compatible string fsl,imx28-lcdif
ARM: dts: imx25: rename node name tcq to touchscreen
ARM: dts: imx: b850v3: Disable unused usdhc4
ARM: dts: imx: b850v3: Define GPIO line names
ARM: dts: imx: b850v3: Use alphabetical sorting
ARM: dts: imx: bx50v3: Configure phy-mode to eliminate a warning
ARM: dts: imx: bx50v3: Configure switch PHY max-speed to 100Mbps
ARM: dts: imx7ulp: Add CPU clock and OPP table support
ARM: dts: imx7-mba7: Deassert BOOT_EN after boot
ARM: dts: tqma7: add boot phase properties
ARM: dts: imx7s: add boot phase properties
ARM: dts: tqma6ul[l]: correct spelling of TQ-Systems
ARM: dts: mba6ulx: add boot phase properties
ARM: dts: imx6ul[l]-tqma6ul[l]: add boot phase properties
ARM: dts: imx6ul/imx6ull: add boot phase properties
ARM: dts: imx6qdl-mba6: add boot phase properties
ARM: dts: imx6qdl-tqma6: add boot phase properties
ARM: dts: imx6qdl: add boot phase properties
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add NXP vendor and IW61x device IDs for WiFi chips over SDIO
- Add quirk for incorrect manufacturing date
- Add support for manufacturing date beyond 2025
- Optimize support for secure erase/trim for some Kingston eMMCs
- Remove support for the legacy "enable-sdio-wakeup" DT property
- Use single block writes in the retry path
MMC host:
- dw_mmc:
- A great amount of cleanups/simplifications to improve the code
- Add clk_phase_map support
- Remove mshc DT alias support
- dw_mmc-rockchip:
- Fix runtime PM support for internal phase
- Add support for the RV1103B variant
- loongson2:
- Add support for the Loongson-2K0300 SD/SDIO/eMMC controller
- mtk-sd:
- Add support for the MT8189 variant
- renesas_sdhi_core:
- Add support for selecting an optional mux
- rtsx_pci_sdmmc:
- Simplify voltage switch handling
- sdhci:
- Stop advertising the driver in dmesg
- sdhci-esdhc-imx:
- Add 1-bit bus width support
- Add support for the NXP S32N79 variant
- sdhci-msm:
- Add support for the IPQ5210 and IPQ9650 variants
- Add support for wrapped keys
- Enable ICE for CQE-capable controllers with non-CQE cards
- sdhci-of-arasan:
- Add support for the Axiado AX3000 variant
- sdhci-of-aspeed:
- Add support for the AST2700 variant
- sdhci-of-bst:
- Add driver for the Black Sesame Technologies C1200 controller
- sdhci-of-dwcmshc:
- Add support for the Canaan K230 variant
- Add support for the HPE GSC variant
- Prevent clock glitches to avoid malfunction
- sdhci-of-k1:
- Add support for the K3 variant
mux core/consumers:
- core:
- Add helper functions for getting optional and selected mux-state
- i2c-omap:
- Convert to devm_mux_state_get_optional_selected()
- phy-renesas:
- Convert to devm_mux_state_get_optional_selected()
- phy-can-transceiver:
- Convert to devm_mux_state_get_optional()"
* tag 'mmc-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (131 commits)
mmc: sdhci-msm: Fix the wrapped key handling
mmc: sdhci-of-dwcmshc: Disable clock before DLL configuration
mmc: core: Simplify with scoped for each OF child loop
mmc: core: Optimize size of struct mmc_queue_req
mmc: vub300: clean up module init
mmc: vub300: rename probe error labels
mmc: dw_mmc: Remove dw_mci_start_request wrapper and rename core function
mmc: dw_mmc: Inline dw_mci_queue_request() into dw_mci_request()
mmc: block: Use MQRQ_XFER_SINGLE_BLOCK for both read and write recovery
mmc: mmc_test: Replace hard-coded values with macros and consolidate test parameters
mmc: block: Convert to use DEFINE_SIMPLE_DEV_PM_OPS()
mmc: core: Replace the hard-coded shift value 9 with SECTOR_SHIFT
mmc: sdhci-dwcmshc: Refactor Rockchip platform data for controller revisions
mmc: core: Switch to use pm_ptr() for mmc_host_class_dev_pm_ops
mmc: core: Remove legacy 'enable-sdio-wakeup' DT property support
mmc: mmc_test: use kzalloc_flex
mmc: mtk-sd: disable new_tx/rx and modify related settings for mt8189
dt-bindings: mmc: hisilicon,hi3660-dw-mshc: Convert to DT schema
dt-bindings: mmc: sdhci-msm: add IPQ9650 compatible
mmc: block: use single block write in retry
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v7.1 part2
Late addition:
- Use memory-region-names for r5f across K3 SoCs
* tag 'ti-k3-dt-for-v7.1-part2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arm64: dts: ti: k3: Use memory-region-names for r5f
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner Device Tree Changes for 7.1 - Part 2
UART DMA channels added for A64 and H6. Standard resolution MMIO timer added
for H616. This timer can be used as a broadcast timer for wakeup from idle
states.
* tag 'sunxi-dt-for-7.1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: enable h616 timer support
arm64: dts: allwinner: sun50i-h6: add UART DMA channels
arm64: dts: allwinner: sun50i-a64: add UART DMA channels
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
A few more Arm64 DeviceTree updates for v7.1
Introduce the Hamoa-based Lenovo IdeaCentre Mini X, the Dragonwing
IQ-615 (Talos) EVK, and a Talos EVK camera overlay.
Enable DisplayPort support on the Glymur CRD.
Add WiFi, Bluetooh, LEDs, and venus on LG-based SDM845 devices. Add
battery, charger, and display on the LG G7 ThinQ.
Enable SD-card, describe the audio amplifier, and increase the speed of
the i2c clock for touchscreen on the SHIFT SHIFT6mq.
Add camera subsystem, camera control interface, GPU, GMU, and GPU
cooling on the Talos platform. Enable the GPU on the Ride board.
* tag 'qcom-arm64-for-7.1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (31 commits)
arm64: dts: qcom: Add the Lenovo IdeaCentre Mini X
dt-bindings: arm: qcom: Document the Lenovo IdeaCentre Mini X
arm64: dts: qcom: sdm845-shift-axolotl: Enable TFA9890 codec
arm64: dts: qcom: sdm845-shift-axolotl: Set higher touchscreen i2c clock
arm64: dts: qcom: sdm845-shift-axolotl: Enable sdcard
arm64: dts: qcom: talos: Add clocks for QoS configuration
arm64: dts: qcom: talos-evk-camera: Add DT overlay
arm64: dts: qcom: talos: Add camera MCLK pinctrl
arm64: dts: qcom: talos: Add CCI definitions
arm64: dts: qcom: talos: Add camss node
arm64: dts: qcom: talos: Add EL2 overlay
arm64: dts: qcom: talos-evk: Add support for QCS615 talos evk board
arm64: dts: qcom: talos/qcs615-ride: Fix inconsistent USB PHY node naming
dt-bindings: arm: qcom: talos-evk: Add QCS615 Talos EVK SMARC platform
arm64: dts: qcom: qcs615-ride: Enable Adreno 612 GPU
arm64: dts: qcom: talos: Add GPU cooling
arm64: dts: qcom: talos: Add gpu and rgmu nodes
arm64: dts: qcom: talos: add the GPU SMMU node
arm64: dts: qcom: sdm845-lg-common: Add chassis-type
arm64: dts: qcom: sdm845-lg: Add wifi nodes
...
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Add the newly introduced memory-region-names to all occurences of
ti,*-r5f. This helps adding a name to each memory-region so it is
easier to see what memory regions are for.
Signed-off-by: Markus Schneider-Pargmann (TI) <msp@baylibre.com>
Link: https://patch.msgid.link/20260318-topic-am62a-ioddr-dt-v6-19-v3-3-c41473cb23c3@baylibre.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip ARM64 device tree updates for v7.1
This update includes:
- device tree files for the Microchip LAN9691 SoC and its evaluation
board (Microchip EV23X71A)
* tag 'microchip-dt64-7.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/at91/linux:
arm64: dts: microchip: add EV23X71A board
dt-bindings: arm: AT91: document EV23X71A board
arm64: dts: microchip: add LAN969x support
arm64: dts: microchip: add LAN969x clock header file
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux into soc/dt
Krzysztof notes:
1. This might impact users of i.MX8MM SPDIF as compatible is being
replaced.
Frank Li writes:
i.MX arm64 device tree changes for 7.1:
- New Board Support
S32N79-RDB, Variscite DART-MX95, DART-MX91 with Sonata carrier boards,
Verdin iMX95 with multiple carrier boards (Yavia, Mallow, Ivy, Dahlia)
TQMa93xx/MBa93xxLA-MINI, SolidRun i.MX8MP HummingBoard IIoT,
SolidRun i.MX8MM SOM and EVB, SolidRun SolidSense-N8 board
Ka-Ro Electronics tx8m-1610 COM, GOcontroll Moduline IV and Moduline Mini,
NXP FRDM-IMX91S board, i.MX93 Wireless EVK board with Wireless SiP,
NXP i.MX8MP audio board v2.
- USB & Type-C Support
Type-C and USB nodes for imx943, correct power-fole for
imx8qxp-mek/imx8qm-mek.
- Audio Enhancements
PDM microphone, bt-sco, and WM8962 sound card support for i.MX952. AONMIX
MQS for i.MX95. Use audio-graph-card2 for imx8dxl-evk. WM8904 audio codec
for imx8mm-var-som.
- Thermal & Cooling
PF09/53 thermal zone, fan node, active cooling on A55, SCMI
sensor/lmm/cpu for imx943/imx94.
- Display Support
Multiple LVDS and parallel display overlays for TQ boards (imx91/imx93).
Parallel display for i.MX93. ontat,kd50g21-40nt-a1 panel for
imx93-9x9-qsb. pixpaper display overlay for i.MX93 FRDM.
- Networking
Multiple queue configuration on eqos for TQMa8MPxL.
MaxLinear PHY support, MCP251xFD CAN controller for imx8mm-var-som.
SDIO WiFi support (imx91-evk, imx8mp-evk, imx943-evk)
- Bluetooth Support
imx943-evk, imx93-14x14-evk, imx95-19x19-evk, imx8mp-evk, imx8mn-evk,
imx8mm-evk.
- Miscellaneous
xspi and MT35XU01G SPI NOR flash for i.MX952.
V2X/ELE mailbox nodes, SCMI misc ctrl-ids for imx94.
eDMA channel reservation for V2X, Cortex M7 support for imx95.
Ethos-U65 NPU and SRAM nodes for imx93.
Wire up DMA IRQ for PCIe for imx8qm-ss-hsio.
- Bug Fixes & Improvements
Complete pinmux for rcwsr12 to fix I2C bus recovery affect other module
pinmux for layscape platform.
Multiple bug fixes for GPIO polarity, IRQ types, pinmux configurations.
GICv3 PPI interrupt CPU mask cleanup across multiple SoCs.
Fixed Ethernet PHY IRQ types on TQ boards.
Fixed UART RTS/CTS muxing issues.
Fixed SD card issues on Kontron boards.
Fixed touch reset configuration.
Removed fallback ethernet-phy-ieee802.3-c22 where appropriate.
Move funnel outside from soc.
TMU sensor ID cleanup.
Change usdhc tuning step for eMMC and SD.
Hexadecimal format, readability improvements, duplicate removal.
* tag 'imx-dt64-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux: (139 commits)
arm64: dts: imx8qxp-mek: switch Type-C connector power-role to dual
arm64: dts: imx8qm-mek: switch Type-C connector power-role to dual
arm64: dts: lx2162a-clearfog: set sfp connector leds function and source
arm64: dts: lx2162a-sr-som: add crypto & rtc aliases, model
arm64: dts: lx2160a-cex7: add rtc alias
arm64: dts: lx2160a: complete pinmux for rcwsr12 configuration word
arm64: dts: lx2160a: change zeros to hexadecimal in pinmux nodes
arm64: dts: lx2160a: add sda gpio references for i2c bus recovery
arm64: dts: lx2160a: rename pinmux nodes for readability
arm64: dts: lx2160a: remove duplicate pinmux nodes
arm64: dts: lx2160a: change i2c0 (iic1) pinmux mask to one bit
arm64: dts: lx2160a-cex7/lx2162a-sr-som: fix usd-cd & gpio pinmux
arm64: dts: freescale: imx8mp-moduline-display-106: add typec-power-opmode property
arm64: dts: imx8mp-tqma8mpql: Add DT overlays to explicit list
arm64: dts: imx8mp-evk: Specify ADV7535 register addresses
arm64: dts: imx8dxl-evk: Use audio-graph-card2 for wm8960-2 and wm8960-3
arm64: dts: imx943-evk: Add pf09/53 thermal zone
arm64: dts: imx943-evk: Add fan node and enable active cooling on A55
arm64: dts: imx943-evk: Add nxp,ctrl-ids for scmi_misc
arm64: dts: imx943: Add thermal support
...
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v7.1-rc1
Various fixes and new additions across a number of devices. GPIO and PCI
are enabled on Tegra264 and the Jetson AGX Thor Developer Kit, allowing
it to boot via network and mass storage.
* tag 'tegra-for-7.1-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add Tegra264 GPIO controllers
arm64: tegra: smaug: Enable SPI-NOR flash
arm64: tegra: Add Jetson AGX Thor Developer Kit support
arm64: tegra: Add PCI controllers on Tegra264
arm64: tegra: Fix RTC aliases
arm64: tegra: Drop redundant clock and reset names for TSEC
arm64: tegra: Fix snps,blen properties
dt-bindings: pci: Document the NVIDIA Tegra264 PCIe controller
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v7.1
Introduce the Eliza, Glymur, Mahua, and IPQ5210 Qualcomm SoCs.
Introduce the Redmi 4A, Redmi Go, Arduino Monza (VENTUNO Q), Redmi Note
8T, Purwa EVK, ECS Liva QCS710, additional variants of the DB820c,
Ayaneo Pocket S2, Thundercomm AI Mini PC G1, Samsung Galaxy Core Prime
LTE Verizon Wireless, Wiko Pulp 4G, the Purwa-variant of ASUS Vivobook
S15, the Eliza MTP, and the Glymur and Mahua CRDs.
Introduce UFS support and flatten the DWC3 node on Hamoa. Enable UFS,
SDC, DisplayPort audio playback, and an EL2 overlay for the Hamoa IoT
EVK. Enable DisplayPort audio on the Hamoa CRD and add HDMI support on
the ASUS Zenbook A14. Reduce the duplication of thermal sensors across
Purwa and Hamoa.
Add the QPIC SPI NAND controller on IPQ5332 and IPQ9574. Describe and
enable the eMMC controller on IPQ9574.
Add display, audio/compute remoteprocs, QUP devices, thermal sensors,
display, and CoreSight on the Kaanapali platform. Enable audio, compute
display, PMIC, Bluetooth, and WiFi on the MTP. Describe PMIC, audio and
compute remoteprocs on QRD.
Add role-switching support for the tertiary USB controller on Lemans.
Enable the tertiary USB controller and the GPIO expander on the Lemans
EVK, and add an overlay for the IFP Mezzanine.
Add UFS, camera control interface, audio GPR, and FastRPC support on
Milos. Enable UFS, camera EEPROMs, and hall effect sensor on the
Fairphone FP6.
Add camera control interface and fix a variety of things on the Monaco
platform, add missing FastRPC compute banks. Add eMMC support, describe
the DisplayPort bridge and GPIO expander on the Monaco EVK. Add overlay
for EVK camera and the IFP mezzanine.
Add touchscreen to the Xiaomi Redmi 4A, 5A, and Go, and fix the board-id
on the 4A.
Add the ambient light and proximity sensor on the Asus ZenFone 2
Laser/Selfie.
On Kodiak-based boards, enable the ethernet and USB Type-A ports on the
Rb3Gen2, correct the LT9611 routing on the RubikPi3, add Bluetooth on
the IDP, and add front camera support on the Fairphone FP5.
Introduce an overlay for the Rb3Gen2 Industrial Mezzanine.
Describe DSI on the Monaco SoC and enable Bluetooth, WiFi and DSI/DP
bridge on the Ride board.
Describe the WiFi/BT combo chip properly on the QRB2210 RB1 and QRB4210.
The describe the DSI/DP bringde on the Arduino UnoQ.
01022af2d218 arm64: dts: qcom: sc7280-chrome-common: disable Venus
Introduce DSI display support on SC8280XP.
Add LLCC on SDM670 and another SPI controller on SDM630.
Properly describe the WiFi/BT chip on a variety of SDM845-based
devices. Introduce the "alert slider" on the OnePlus 6 and OnePlus 6T
devices.
Introduce the PRNG, describe the debug UART, and add the MDSS core reset
on SM6125. Enable the debug UART and fix various issues on the Xiaomi
Redmi Note 8. Describe the touchscreen on the Xiaomi Mi A3.
Properly describe the WiFi/BT combo chip in SM8150 HDK.
Improve the EAS properties on SM8550, in addition to various other
fixes. Introduce a new overlay for the HDK display card.
Introduce various smaller fixes across SM8450 and SM8650.
Add display support on SM8750 and enable DSI and DisplayPort on the MTP.
Also add tsens and thermal-zones.
Add ETR devices, flatten the USB controller node, and mark USB
controllers as wakeup-capable devices, on Talos.
Properly describe the IPA IMEM slice on a variety of platforms.
Drop redundant non-controllable regulator definitions from a variety of
boards.
Drop redundant VSYNC pin state definition from various platforms.
* tag 'qcom-arm64-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (254 commits)
arm64: dts: qcom: sm8250: Add missing CPU7 3.09GHz OPP
arm64: dts: qcom: sm8550-hdk: add support for the Display Card overlay
arm64: dts: qcom: msm8916-samsung-coreprimeltevzw: add device tree
dt-bindings: qcom: Document samsung,coreprimeltevzw
arm64: dts: qcom: msm8916-samsung-fortuna: Move SM5504 from rossa and refactor MUIC
arm64: dts: qcom: sdm670: add llcc
arm64: dts: qcom: qcm6490-fairphone-fp5: Add front camera support
arm64: dts: qcom: qcm6490-fairphone-fp5: Sort pinctrl nodes by pins
arm64: dts: qcom: milos-fairphone-fp6: Add camera EEPROMs on CCI busses
arm64: dts: qcom: milos: Add CCI busses
arm64: dts: qcom: purwa-iot-evk: Enable UFS
arm64: dts: qcom: eliza: Add thermal sensors
arm64: dts: qcom: sc8280xp: Add dsi nodes on SC8280XP
arm64: dts: qcom: sdm845-oneplus: Describe Wi-Fi/BT properly
arm64: dts: qcom: sdm845-google: Describe Wi-Fi/BT properly
arm64: dts: qcom: drop redundant zap-shader memory-region
arm64: dts: qcom: fix remaining gpu_zap_shader labels
arm64: dts: qcom: msm8996: fix indentation in sdhc2 node
arm64: dts: qcom: monaco-evk: enable UART6 for robot expansion board
arm64: dts: qcom: lemans-evk: enable UART0 for robot expansion board
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/arm
New board, the Khadas Edge 2L. Newly added peripherals are the
OTP nvmem controllers for RK3528, RK3562 and RK3566/8, SPDIF on RK3576.
The RK3566/8 SoCs now also control the Pipe-clocks on their PCIe
controllers and UFSHC controller on RK3576 got an additional reset line.
Apart from that are of course individual board changes and fixes for
older issues that are not specific to the current development cycle.
* tag 'v7.1-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (44 commits)
arm64: dts: rockchip: configure hdmirx in Rock 5 ITX
arm64: dts: rockchip: assign pipe clock to rk356x PCIe lanes
arm64: dts: rockchip: Add mphy reset to ufshc node
arm64: dts: rockchip: Enable OTP controller for RK3528
arm64: dts: rockchip: Enable OTP controller for RK356x
arm64: dts: rockchip: Enable OTP controller for RK3562
arm64: dts: rockchip: Enable PCIe CLKREQ# for RK3588 on Rock 5b-5bp-5t series
arm64: dts: rockchip: add SD/eMMC aliases for ArmSom Sige5
arm64: dts: rockchip: Add SPDIF nodes to RK3576 device tree
arm64: dts: rockchip: Add Khadas Edge 2L board
dt-bindings: arm: rockchip: Add Khadas Edge 2L board
arm64: dts: rockchip: Fix RK3562 EVB2 model name
arm64: dts: rockchip: Correct Joystick Axes on Gameforce Ace
arm64: dts: rockchip: Correct Fan Supply for Gameforce Ace
Revert "arm64: dts: rockchip: add SPDIF audio to Beelink A1"
arm64: dts: rockchip: Fix Bluetooth stability on LCKFB TaiShan Pi
arm64: dts: rockchip: enable vicap dvp on wolfvision pf5 io expander
arm64: dts: rockchip: Add analog audio switches to RK3576 EVB1
arm64: dts: rockchip: Enable GPU on rk3566-pinenote
arm64: dts: rockchip: Make Jaguar PCIe-refclk pin use pull-up config
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/arm
TI K3 device tree updates for v7.1
Generic Fixes/Cleanups:
- k3-pinctrl: Cleanup alignment and reorder macros
- ti,min-output-impedance addition to all K3 board DT files
SoC Specific Features and Fixes:
AM62L:
- Add RNG node
- Support cpufreq scaling
J721S2:
- Make MAIN domain system control bus a simple-bus
- Add second DSI node
J722S:
- Add main_i2c4 device node
J7200:
- Make MAIN domain system control bus a simple-bus
Board Specific Features and Fixes:
AM642 EVM:
- Add ICSSG0 overlay for dual EMAC support
AM62:
- LP-SK: Enable internal pulls for MMC0 data pins
- SK: Enable Main UART wakeup
- phycore-som: Add 128MiB of global CMA
- Verdin: Add Zinnia board support and misc cleanup
AM62A7-SK:
- Enable Main UART wakeup
- Fix pin name in comment from M19 to N22
AM62D2 EVM:
- Enable Main UART wakeup and set wakeup-source system-states
AM62L3 EVM:
- Disable MMC1 internal pulls on data pins
- Enable Main UART wakeup and enable wkup_uart0 pins/target node
AM62P:
- SK: Disable MMC1 internal pulls on data pins and enable Main UART
wakeup
- Verdin: Add Zinnia support and misc cleanup
AM68 PHYBoard:
- Add DSI->LVDS bridge, LVDS-Display overlay and PEB-AV-15 overlay
AM69 Aquila:
- Fix DP regulator enable GPIO
J721S2 CPB:
- Add QSPI flash partition details
Removal of SMARC-sAM67 board:
- Kontron SMARC-sAM67 board support along with all bindings
are dropped as board is no longer planned for production
* tag 'ti-k3-dt-for-v7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (47 commits)
arm64: dts: ti: k3-pinctrl: sort shift values numerically
arm64: dts: ti: k3-pinctrl: consistently use tabs for alignment
arm64: dts: ti: k3-am642-evm: Add ICSSG0 overlay for dual EMAC support
arm64: dts: ti: k3-am62p-verdin: Add Zinnia
arm64: dts: ti: k3-am62p-verdin: Add SPI_1_CS as GPIO
arm64: dts: ti: k3-am62p-verdin: Split UART_2 pinctrl group
arm64: dts: ti: k3-am62-verdin: Add Zinnia
arm64: dts: ti: k3-am62-verdin: Split UART_2 pinctrl group
arm64: dts: ti: k3-am62-verdin: Fix SPI_1 GPIO CS pinctrl label
dt-bindings: arm: ti: Add verdin am62/am62p zinnia board
arm64: dts: ti: k3-j721s2: Make MAIN domain system control bus a simple-bus
arm64: dts: ti: k3-j7200: Make MAIN domain system control bus a simple-bus
arm64: dts: ti: k3-am62-lp-sk: Enable internal pulls for MMC0 data pins
arm64: dts: ti: k3-am62l3-evm: Disable MMC1 internal pulls on data pins
arm64: dts: ti: k3-am62p5-sk: Disable MMC1 internal pulls on data pins
arm64: dts: ti: k3-am62d2-evm: Enable Main UART wakeup
arm64: dts: ti: k3-am62l3-evm: Enable Main UART wakeup
arm64: dts: ti: k3-am62p5-sk: Enable Main UART wakeup
arm64: dts: ti: k3-am62a7-sk: Enable Main UART wakeup
arm64: dts: ti: k3-am62x-sk-common: Enable Main UART wakeup
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Lenovo IdeaCentre Mini X (Snapdragon) Desktop is a Hamoa-based
ultracompact desktop PC. It provides HDMI, DisplayPort, USB Type-C
display outputs, 5 additional USB ports, Ethernet, dual NVME slots,
headphone jack, WiFi, and Bluetooth.
Introduce a DeviceTree describing this device.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260401-ideacentre-v2-2-5745fe2c764e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Audio amplifier TFA9890 is present on the board.
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20260402-axolotl-misc-p1-v3-3-8934e9db6831@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Sets a higher rate than the default for good responsiveness of
touchscreen.
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20260402-axolotl-misc-p1-v3-2-8934e9db6831@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The SHIFT6mq features an sdcard slot, add it.
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Co-developed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20260402-axolotl-misc-p1-v3-1-8934e9db6831@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add clocks which need to be enabled for configuring QoS on
talos SoC.
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260311103548.1823044-4-odelu.kukatla@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable IMX577 via CCI on Talos EVK Core Kit.
The Talos EVK board does not include a camera sensor
by default. This DTSO has enabled the Arducam 12.3MP
IMX577 Mini Camera Module on the CSI-1 interface.
CSI-1 interface using mclk2 as the MCLK source on this board.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-sm6150_evk-v6-5-38ce4360d5e0@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Define pinctrl definitions to enable camera master clocks on Talos.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-sm6150_evk-v6-4-38ce4360d5e0@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Qualcomm Talos SoC contains single controller,
containing 2 I2C hosts.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-sm6150_evk-v6-3-38ce4360d5e0@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add node for the SM6150 camera subsystem.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-sm6150_evk-v6-2-38ce4360d5e0@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
All the existing variants Talos boards are using Gunyah hypervisor
which means that, so far, Linux-based OS could only boot in EL1 on
those devices. However, it is possible for us to boot Linux at EL2
on these devices [1].
When running under Gunyah, the remote processor firmware IOMMU streams
are controlled by Gunyah. However, without Gunyah, the IOMMU is managed
by the consumer of this DeviceTree. Therefore, describe the firmware
streams for each remote processor.
Add a EL2-specific DT overlay and apply it to Talos IOT variant
devices to create -el2.dtb for each of them alongside "normal" dtb.
[1]
https://docs.qualcomm.com/bundle/publicresource/topics/80-70020-4/boot-developer-touchpoints.html#uefi
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260127-talos-el2-overlay-v2-3-b6a2266532c4@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the device tree for the QCS615-based Talos EVK platform. The
platform is composed of a System-on-Module following the SMARC
standard, and a Carrier Board.
The Carrier Board supports several display configurations, HDMI and
LVDS. Both configurations use the same base hardware, with the display
selection controlled by a DIP switch.
Use a DTBO file, talos-evk-lvds-auo,g133han01.dtso, which defines an
overlay that disables HDMI and adds LVDS. The DTs file talos-evk
can describe the HDMI display configurations.
According to the hardware design and vendor guidance, the WiFi PA
supplies VDD_PA_A and VDD_PA_B only need to be enabled at the same time
as asserting WLAN_EN.
On this platform, WiFi enablement is controlled via the WLAN_EN GPIO
(GPIO84), which also drives the VDD_PA_A and VDD_PA_B power enables.
Remove the VDD_PA_A and VDD_PA_B regulator nodes from the device tree
and rely on WLAN_EN to enable WiFi functionality.
Add talos-evk-usb1-peripheral.dtso overlay to enable USB0 peripheral
(EDL) mode. The base DTS will keep USB0 host-only due to hardware
routing through the EDL DIP switch, and the overlay switches the
configuration for device-mode operation.
The LVDS backlight hardware has been updated to use a simplified
design. The backlight enable signal is now permanently pulled up
to 3.3V and is no longer controlled via GPIO59.
Remove the GPIO59 based backlight configuration from the device
tree, as it is no longer routed to the LVDS interface.
The initial device tree includes support for:
- CPU and memory
- UART
- GPIOs
- Regulators
- PMIC
- Early console
- AT24MAC602 EEPROM
- MCP2515 SPI to CAN
- ADV7535 DSI-to-HDMI bridge
- DisplayPort interface
- SN65DSI84ZXHR DSI-to-LVDS bridge
- Wi-Fi/BT
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Sudarshan Shetty <tessolveupstream@gmail.com>
Link: https://lore.kernel.org/r/20260331060107.501561-4-tessolveupstream@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The USB PHY nodes has inconsistent labels as 'usb_1_hsphy'
and 'usb_hsphy_2' across talos.dtsi and qcs615-ride.dts.
This patch renames them to follow a consistent naming
scheme.
No functional changes, only label renaming.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sudarshan Shetty <tessolveupstream@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260331060107.501561-3-tessolveupstream@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable GPU for qcs615-ride platform and provide path for zap
shader.
Signed-off-by: Jie Zhang <quic_jiezh@quicinc.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260312-qcs615-spin-2-v8-4-fca38edcd6e6@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Unlike the CPU, the GPU does not throttle its speed automatically when it
reaches high temperatures.
Set up GPU cooling by throttling the GPU speed when it reaches 105°C.
Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260312-qcs615-spin-2-v8-3-fca38edcd6e6@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add gpu and rgmu nodes for Talos chipset.
Signed-off-by: Jie Zhang <quic_jiezh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260312-qcs615-spin-2-v8-2-fca38edcd6e6@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the Adreno GPU SMMU node for Talos chipset.
Signed-off-by: Qingqing Zhou <quic_qqzhou@quicinc.com>
Signed-off-by: Jie Zhang <jie.zhang@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260312-qcs615-spin-2-v8-1-fca38edcd6e6@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
More Qualcomm Arm64 DeviceTree fixes for v7.0
The shuffling of reset and wake GPIO properties across various Hamoa
devices left things in an incomplete state, fix this.
Add the missing "ranges" property to the QCM2290 MDSS DeviceTree binding
example, to fix the validation warning that was introduced by the
previous fix.
* tag 'qcom-arm64-fixes-for-7.0-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: hamoa: Fix incomplete Root Port property migration
dt-bindings: display/msm: qcm2290-mdss: Fix missing ranges in example
arm64: dts: qcom: agatti: Fix IOMMU DT properties
dt-bindings: media: venus: Fix iommus property
dt-bindings: display: msm: qcm2290-mdss: Fix iommus property
arm64: dts: qcom: monaco: Reserve full Gunyah metadata region
arm64: dts: qcom: monaco: Fix UART10 pinconf
arm64: dts: qcom: qcm6490-idp: Fix WCD9370 reset GPIO polarity
arm64: dts: qcom: hamoa/x1: fix idle exit latency
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
Allwinner fixes for 7.0
Just one fix to make the r-spi SPI controller use the mcu-dma DMA
controller for DMA instead of the main DMA controller.
* tag 'sunxi-fixes-for-7.0' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: sun55i: Fix r-spi DMA
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes
Renesas fixes for v7.0 (take two)
- Fix TFA BL31 memory corruption on Sparrow Hawk.
* tag 'renesas-fixes-for-v7.0-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: sparrow-hawk: Reserve first 128 MiB of DRAM
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner device tree changes for 7.1 - part 1
Only minor additions this cycle.
Allwinner A523 SoC family had LED controller enabled.
Avaota A1 board had SPI NAND enabled.
New board added:
- TaiqiCat (TQC) A01
* tag 'sunxi-dt-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h6: Add TaiqiCat (TQC) A01 support
dt-bindings: arm: sunxi: Add TaiqiCat (TQC) A01
dt-bindings: vendor-prefixes: Add Beijing Ultrapower Software Co., Ltd.
arm64: dts: allwinner: sun55i-t527: avaota-a1: Add SPI NAND
arm64: dts: allwinner: sun55i-a523: Add pinmux for spi0 on PJ pins
arm64: dts: allwinner: sun55i-t527: avaota-a1: Enable LEDs
arm64: dts: allwinner: sun55i-a523: Add LED controller
dt-bindings: leds: sun50i-a100: Add compatible for Allwinner A523 SoC
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/dt
ARM64: DT: HiSilicon ARM64 DT updates for v7.1
- Rename dwmmc nodes to mmc to comply with the schema
* tag 'hisi-arm64-dt-for-7.1' of https://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: Rename dwmmc nodes to mmc
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA DTS updates for v7.1
- dt-bindings updates:
- Document fallback compatible for Stratix10 SoCDK eMMC board
- Document compatible for the Agilex5 SoCFPGA modular board
- Add emmc support for the Stratix10
- Drop CPU masks from the GICv3 PPI interrupts for Agilex5
* tag 'socfpga_updates_for_v7.1_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: intel: agilex5: Drop CPU masks from GICv3 PPI interrupts
dt-bindings: intel: Add Agilex5 SoCFPGA modular board
arm64: dts: socfpga: stratix10: Add emmc support
dt-bindings: altera: Add fallback compatible for Stratix 10 SoCDK eMMC variant
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/cix into soc/dt
- Add power domain and reset for SoC
- Add GPIO for both SoC and Radxa Orion O6 board
* tag 'cix-dt-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/cix:
arm64: dts: cix: add FCH(S0)/S5 GPIO controllers for sky1
arm64: dts: cix: Add scmi powerdomain nodes for sky1
arm64: dts: cix: add support for cix sky1 resets
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v7.1 (take two)
- Add DT overlay support for the MayQueen PixPaper display on the
Yuridenki-Shokai Kakip board,
- Add Ethernet PHY interrupt support for the RZ/T2H and RZ/N2H EVK
boards,
- Add SPI and PCIe support for the RZ/G3E SoC and the RZ/G3E SMARC EVK
board,
- Add DT overlay support for the WaveShare 13.3" 1920x1080 DSI
Capacitive Touch Display and the Olimex MIPI-HDMI adapter on the
Retronix Sparrow Hawk board,
- Drop several superfluous C22 Ethernet PHY compatible strings,
- Remove WDT nodes meant for other CPU cores on the RZ/V2N SoC,
- Remove unavailable LVDS panel support for the Beacon ReneSoM base
board,
- Add initial support for the RZ/G3L (R9A08G046) SoC, and the RZ/G3L
SMARC SoM and EVK boards,
- Add Versa3 clock generator support for the RZ/V2H EVK development
board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v7.1-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (29 commits)
ARM: dts: renesas: Drop KSZ8041 PHY C22 compatible strings
ARM: dts: renesas: rza2mevb: Drop RTL8201F PHY C22 compatible string
ARM: dts: renesas: r8a7742-iwg21d-q7-dbcm-ca: Drop KSZ8081 PHY C22 compatible string
arm64: dts: renesas: Add initial device tree for RZ/G3L SMARC EVK board
arm64: dts: renesas: renesas-smarc2: Move usb3 nodes to board DTS
arm64: dts: renesas: Add initial support for RZ/G3L SMARC SoM
arm64: dts: renesas: Add initial DTSI for RZ/G3L SoC
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Add versa3 clock generator node
dt-bindings: clock: renesas,rzg2l-cpg: Document RZ/G3L SoC
arm64: dts: renesas: beacon-renesom: Remove LVDS Panel
ARM: dts: r9a06g032: Add #address-cells to the GIC node
arm64: dts: renesas: r9a09g056: Remove wdt{0,2,3} nodes
arm64: dts: renesas: sparrow-hawk: Add overlay for Olimex MIPI-HDMI adapter
arm64: dts: renesas: r9a09g047e57-smarc: Enable PCIe
arm64: dts: renesas: r9a09g047e57-smarc-som: Add PCIe reference clock
arm64: dts: renesas: r9a09g047: Add PCIe node
arm64: dts: renesas: Fix KSZ9131 PHY bogus txdv-skew-psec properties
arm64: dts: renesas: Drop KSZ9131 PHY C22 compatible strings
arm64: dts: renesas: Drop RTL8211F PHY C22 compatible strings
arm64: dts: renesas: Drop RTL8211E PHY C22 compatible strings
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v7.1, round 1
Highlights:
----------
- MPU:
- STM32MP13:
- Introduce and enable debug bus on DK board.
- Enable Coresight on DK board.
- Add DT overlays for DH board.
- Add Wakeup capabilities on I2C nodes.
- STMP32MP15:
- ST:
- Enable DCMI DMA chaining to improve performances.
- Introduce and enable debug bus on EV and DK board.
- Enable Coresight on EV and DK board.
- DH:
- Add DT overlays for DH board.
- Phytec:
- Rename "Phycore" to "phyboard-sargas" DT files and introduce
SOM device tree file.
- Fix and enhance current support.
- STM32MP21:
- Add Bsec support.
- STM32MP23:
- Add LTDC and LVDS support and enable display on STM32MP235F-DK
board.
- STM32MP25:
- Enable display on STM32MP235F-DK board.
* tag 'stm32-dt-for-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (42 commits)
arm64: defconfig: Enable STMicroelectronics STM32 display support
arm64: dts: st: enable display support on stm32mp257f-dk board
arm64: dts: st: describe power supplies for stm32mp257f-dk board
arm64: dts: st: enable display support on stm32mp235f-dk board
arm64: dts: st: describe power supplies for stm32mp235f-dk board
arm64: dts: st: add clock-cells to syscfg node on stm32mp231
arm64: dts: st: add lvds support on stm32mp235
arm64: dts: st: add ltdc support on stm32mp235
arm64: dts: st: add ltdc support on stm32mp231
arm64: dts: st: omit unused pinctrl groups from stm32mp25 dtb files
arm64: dts: st: add bootph-all in bsec node to stm32mp215f-dk
arm64: dts: st: add bsec support to stm32mp21
ARM: dts: stm32: fix misalignments in nodes of stm32mp131
ARM: dts: stm32: fix misalignments in nodes of stm32mp151
arm64: dts: st: describe i2c2 / i2c8 on stm32mp235f-dk
arm64: dts: st: describe i2c2 / i2c8 on stm32mp257f-dk
arm64: dts: st: disable DMA usage for i2c on stm32mp257f-ev1
arm64: dts: st: add i2c2 pinmux nodes in stm32mp25-pinctrl.dtsi
arm64: dts: st: update i2c nodes interrupt/wakeup-source in stm32mp231
arm64: dts: st: update i2c nodes interrupt/wakeup-source in stm32mp251
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v7.1
1. Add initial support for Axis ARTPEC-9 SoC and Alfred board using it.
Just like ARTPEC-8, this is a derivative of Samsung Exynos SoC made
for Axis, sharing most or all of core SoC blocks with Samsung
designs.
2. New boards: Exynos7870 based Samsung Galaxy J7 (2016) and Samsung
Galaxy J5 (2017).
3. Google GS101 Pixel phone: describe all PMIC regulators and Maxim
fuel-gauge.
4. ExynosAutov920: add G3D (GPU) clock controller (CMU).
* tag 'samsung-dt64-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos8895: Move I2C address/size-cells to DTSI
arm64: dts: exynos7870: Move I2C address/size-cells to DTSI
arm64: dts: exynos: gs101-pixel-common: add Maxim MAX77759 fuel gauge
arm64: dts: exynos: add initial support for Samsung Galaxy J5
dt-bindings: arm: samsung: add compatible for samsung-j5y17lte
arm64: dts: exynosautov920: add CMU_G3D clock DT nodes
arm64: dts: exynos: gs101-pixel: add all S2MPG1x regulators
arm64: dts: exynos: add initial support for Samsung Galaxy J7 (2016)
dt-bindings: arm: samsung: add compatible for samsung-j7xelte
arm64: dts: axis: artpec9: Fix missing soc unit address
arm64: dts: axis: Add ARTPEC-9 Alfred board support
arm64: dts: exynos: axis: Add initial ARTPEC-9 SoC support
dt-bindings: arm: axis: Add ARTPEC-9 alfred board
dt-bindings: clock: Add ARTPEC-9 clock controller
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 7.1, please pull the following:
- Maira adds the V3D DT node to the 2712 (Raspberry Pi 5) SoC
- Gergor adds the I2C controller, CSI (camera), ISP (image signal
processor), fixes the pinctrl node and updates the UART10 interrupt
for the RP1 sister chip to the 2712 (Raspberry Pi 5)
- Rob moves the firmware and GPU to the root level to fix DTC warnings
* tag 'arm-soc/for-7.1/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm2712: Move non simple-bus nodes to root level
arm64: dts: broadcom: bcm2712-d-rpi-5-b: update uart10 interrupt
arm64: dts: broadcom: bcm2712-d-rpi-5-b: add fixes for pinctrl/pinctrl_aon
arm64: dts: broadcom: bcm2712-rpi-5-b: add pinctrl properties for csi i2cs
arm64: dts: broadcom: bcm2712: add camera backend node pispbe
arm64: dts: broadcom: rp1: add csi nodes
arm64: dts: broadcom: rp1: add i2c controller
arm64: dts: broadcom: bcm2712: Add V3D device node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The sdm845-lg devices are all phones, therefore handset chassis
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
Link: https://lore.kernel.org/r/20260331-judyln-dts-v7-12-87217b15fefb@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Wi-Fi now works with this patch, relevant firmware and
qcom,snoc-host-cap-skip-quirk
qcom,snoc-host-cap-skip-quirk has not been approved/merged in mainline,
so it is not included here.
ath10k_snoc 18800000.wifi: qmi chip_id 0x30214 chip_family 0x4001 board_id 0xff soc_id 0x40030001
ath10k_snoc 18800000.wifi: qmi fw_version 0x20060285 fw_build_timestamp 2020-10-12 23:35 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.2.0.c4-00645-QCAHLSWMTPLZ-1.336037.2
ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000
ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
ath10k_snoc 18800000.wifi: firmware ver api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
ath10k_snoc 18800000.wifi: htt-ver 3.83 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1
ath10k_snoc 18800000.wifi: invalid MAC address; choosing random
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
Link: https://lore.kernel.org/r/20260331-judyln-dts-v7-11-87217b15fefb@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Also include other supporting msm drm nodes, gpio and backlight
Co-developed-by: Amir Dahan <system64fumo@tuta.io>
Signed-off-by: Amir Dahan <system64fumo@tuta.io>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
Link: https://lore.kernel.org/r/20260331-judyln-dts-v7-10-87217b15fefb@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
These regulators are required for the LCD
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
Link: https://lore.kernel.org/r/20260331-judyln-dts-v7-9-87217b15fefb@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the multicolor status LED in the phone's notch.
Signed-off-by: Amir Dahan <system64fumo@tuta.io>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
Link: https://lore.kernel.org/r/20260331-judyln-dts-v7-8-87217b15fefb@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Values based on lineageos kernel
https://github.com/LineageOS/android_kernel_lge_sdm845/blob/lineage-22.2/arch/arm64/boot/dts/lge/sdm845-battery/LGE_BLT39_LGC_3000mAh.dtsi
Signed-off-by: Christopher Brown <crispybrown@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
Link: https://lore.kernel.org/r/20260331-judyln-dts-v7-7-87217b15fefb@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
uart9 is debug serial on USB SBU1/2
UART RX is SBU1 and UART TX is SBU2 of the USB-C port).
1.8V Logic Level
Tested using pololu usb07a https://www.pololu.com/product/2585
and CH340 USB-UART
uart6 is bluetooth
Bluetooth: hci0: setting up wcn399x
Bluetooth: hci0: QCA Product ID :0x0000000a
Bluetooth: hci0: QCA SOC Version :0x40010214
Bluetooth: hci0: QCA ROM Version :0x00000201
Bluetooth: hci0: QCA Patch Version:0x00000001
Bluetooth: hci0: QCA controller version 0x02140201
Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv
Bluetooth: hci0: QCA Downloading qca/judyln/crnv21.bin
Bluetooth: hci0: QCA setup on UART is completed
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
Link: https://lore.kernel.org/r/20260331-judyln-dts-v7-6-87217b15fefb@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Qualcomm serial communicators required for i2c, serial, and spi
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260331-judyln-dts-v7-5-87217b15fefb@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Qualcomm video en/de-coder
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
Link: https://lore.kernel.org/r/20260331-judyln-dts-v7-4-87217b15fefb@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
For consistency with judyln and new naming scheme for firmware
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
Link: https://lore.kernel.org/r/20260331-judyln-dts-v7-3-87217b15fefb@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add paths for Qualcomm firmware, including:
ipa, modem, venus, gpu
GPU and bluetooth are confirmed working, others may need more
testing/fixes
But regardless they will need the firmware paths specified here
and firmware added upstream before they will work, so might as well
get started on it now.
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
Link: https://lore.kernel.org/r/20260331-judyln-dts-v7-2-87217b15fefb@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
