| Age | Commit message (Collapse) | Author | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Add support for QEMU virt-ctrl, and use it for system reset
and power off on the virt platform
- defconfig updates
- Miscellaneous fixes and improvements
* tag 'm68k-for-v7.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: virt: Switch to qemu-virt-ctrl driver
power: reset: Add QEMU virt-ctrl driver
m68k: defconfig: Update defconfigs for v7.0-rc1
m68k: emu: Replace unbounded sprintf() in nfhd_init_one()
m68k: uapi: Add ucontext.h
m68k: defconfig: hp300: Enable monochrome and 16-color linux logos
m68k: q40: Remove commented out code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Allow TLP Processing Hints to be enabled for RCiEPs (George Abraham
P)
- Enable AtomicOps only if we know the Root Port supports them (Gerd
Bayer)
- Don't enable AtomicOps for RCiEPs since none of them need Atomic
Ops and we can't tell whether the Root Complex would support them
(Gerd Bayer)
- Leave Precision Time Measurement disabled until a driver enables it
to avoid PCIe errors (Mika Westerberg)
- Make pci_set_vga_state() fail if bridge doesn't support VGA
routing, i.e., PCI_BRIDGE_CTL_VGA is not writable, and return
errors to vga_get() callers including userspace via
/dev/vga_arbiter (Simon Richter)
- Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3,
rzg3s drivers (where the actual controller constraints are known),
and remove validation from the generic OF DT accessor (Hans Zhang)
- Remove pc110pad driver (no longer useful after 486 CPU support
removed) and no_pci_devices() (pc110pad was the last user) (Dmitry
Torokhov, Heiner Kallweit)
Resource management:
- Prevent assigning space to unimplemented bridge windows; previously
we mistakenly assumed prefetchable window existed and assigned
space and put a BAR there (Ahmed Naseef)
- Avoid shrinking bridge windows to fit in the initial Root Port
window; fixes one problem with devices with large BARs connected
via switches, e.g., Thunderbolt (Ilpo Järvinen)
- Pass full extent of empty space, not just the aligned space, to
resource_alignf callback so free space before the requested
alignment can be used (Ilpo Järvinen)
- Place small resources before larger ones for better utilization of
address space (Ilpo Järvinen)
- Fix alignment calculation for resource size larger than align,
e.g., bridge windows larger than the 1MB required alignment (Ilpo
Järvinen)
Reset:
- Update slot handling so all ARI functions are treated as being in
the same slot. They're all reset by Secondary Bus Reset, but
previously drivers of ARI functions that appeared to be on a
non-zero device weren't notified and fatal hardware errors could
result (Keith Busch)
- Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
events (Keith Busch)
- Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked
by CXL because it has no effect (Vidya Sagar)
- Avoid FLR for AMD NPU device, where it causes the device to hang
(Lizhi Hou)
Error handling:
- Clear only error bits in PCIe Device Status to avoid accidentally
clearing Emergency Power Reduction Detected (Shuai Xue)
- Check for AER errors even in devices without drivers (Lukas Wunner)
- Initialize ratelimit info so DPC and EDR paths log AER error
information (Kuppuswamy Sathyanarayanan)
Power control:
- Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so
generic pwrctrl driver can control it (Neil Armstrong)
Hotplug:
- Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core
doesn't complain when setting brightness fails because the endpoint
is gone (Richard Cheng)
Peer-to-peer DMA:
- Allow wildcards in list of host bridges that support peer-to-peer
DMA between hierarchy domains and add all Google SoCs (Jacob
Moroni)
Endpoint framework:
- Advertise dynamic inbound mapping support in pci-epf-test and
update host pci_endpoint_test to skip doorbell testing if not
advertised by endpoint (Koichiro Den)
- Return 0, not remaining timeout, when MHI eDMA ops complete so
mhi_ep_ring_add_element() doesn't interpret non-zero as failure
(Daniel Hodges)
- Remove vntb and ntb duplicate resource teardown that leads to oops
when .allow_link() fails or .drop_link() is called (Koichiro Den)
- Disable vntb delayed work before clearing BAR mappings and
doorbells to avoid oops caused by doing the work after resources
have been torn down (Koichiro Den)
- Add a way to describe reserved subregions within BARs, e.g.,
platform-owned fixed register windows, and use it for the RK3588
BAR4 DMA ctrl window (Koichiro Den)
- Add BAR_DISABLED for BARs that will never be available to an EPF
driver, and change some BAR_RESERVED annotations to BAR_DISABLED
(Niklas Cassel)
- Add NTB .get_dma_dev() callback for cases where DMA API requires a
different device, e.g., vNTB devices (Koichiro Den)
- Add reserved region types for MSI-X Table and PBA so Endpoint
controllers can them as describe hardware-owned regions in a
BAR_RESERVED BAR (Manikanta Maddireddy)
- Make Tegra194/234 BAR0 programmable and remove 1MB size limit
(Manikanta Maddireddy)
- Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
(Manikanta Maddireddy)
- Add Tegra194 and Tegra234 device table entries to pci_endpoint_test
(Manikanta Maddireddy)
- Skip the BAR subrange selftest if there are not enough inbound
window resources to run the test (Christian Bruel)
New native PCIe controller drivers:
- Add DT binding and driver for Andes QiLai SoC PCIe host controller
(Randolph Lin)
- Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan
Zhang)
Baikal T-1 PCIe controller driver:
- Remove driver since it never quite became usable (Andy Shevchenko)
Cadence PCIe controller driver:
- Implement byte/word config reads with dword (32-bit) reads because
some Cadence controllers don't support sub-dword accesses (Aksh
Garg)
CIX Sky1 PCIe controller driver:
- Add 'power-domains' to DT binding for SCMI power domain (Gary Yang)
Freescale i.MX6 PCIe controller driver:
- Add i.MX94 and i.MX943 to fsl,imx6q-pcie-ep DT binding (Richard
Zhu)
- Delay instead of polling for L2/L3 Ready after PME_Turn_off when
suspending i.MX6SX because LTSSM registers are inaccessible
(Richard Zhu)
- Separate PERST# assertion (for resetting endpoints) from core reset
(for resetting the RC itself) to prepare for new DTs with PERST#
GPIO in per-Root Port nodes (Sherry Sun)
- Retain Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
MSI from downstream devices will work (Richard Zhu)
- Fix i.MX95 reference clock source selection when internal refclk is
used (Franz Schnyder)
Freescale Layerscape PCIe controller driver:
- Allow building as a removable module (Sascha Hauer)
MediaTek PCIe Gen3 controller driver:
- Use dev_err_probe() to simplify error paths and make deferred probe
messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu
Tsai)
- Power off device if setup fails (Chen-Yu Tsai)
- Integrate new pwrctrl API to enable power control for WiFi/BT
adapters on mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Poll less aggressively and non-atomically for PME_TO_Ack during
transition to L2 (Vidya Sagar)
- Disable LTSSM after transition to Detect on surprise link down to
stop toggling between Polling and Detect (Manikanta Maddireddy)
- Don't force the device into the D0 state before L2 when suspending
or shutting down the controller (Vidya Sagar)
- Disable PERST# IRQ only in Endpoint mode because it's not
registered in Root Port mode (Manikanta Maddireddy)
- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)
- Disable direct speed change in Endpoint mode so link speed change
is controlled by the host (Vidya Sagar)
- Set LTR values before link up to avoid bogus LTR messages with 0
latency (Vidya Sagar)
- Allow system suspend when the Endpoint link is down (Vidya Sagar)
- Use DWC IP core version, not Tegra custom values, to avoid DWC core
version check warnings (Manikanta Maddireddy)
- Apply ECRC workaround to devices based on DesignWare 5.00a as well
as 4.90a (Manikanta Maddireddy)
- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234
erratum (Vidya Sagar)
- Delay post-PERST# cleanup until core is powered on to avoid CBB
timeout (Manikanta Maddireddy)
- Assert CLKREQ# so switches that forward it to their downstream side
can bring up those links successfully (Vidya Sagar)
- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state
from any previous bad link state (Vidya Sagar)
- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so
DMA driver and Endpoint controller driver can share the interrupt
line (Vidya Sagar)
- Enable DMA interrupt to support DMA in both Root Port and Endpoint
modes (Vidya Sagar)
- Enable hardware link retraining after link goes down in Endpoint
mode (Vidya Sagar)
- Add DT binding and driver support for core clock monitoring (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Advertise 'Hot-Plug Capable' and set 'No Command Completed Support'
since Qcom Root Ports support hotplug events like DL_Up/Down and
can accept writes to Slot Control without delays between writes
(Krishna Chaitanya Chundru)
Renesas R-Car PCIe controller driver:
- Mark Endpoint BAR0 and BAR2 as Resizable (Koichiro Den)
- Reduce EPC BAR alignment requirement to 4K (Koichiro Den)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/G3E to DT binding and to driver (John Madieu)
- Assert (not deassert) resets in probe error path (John Madieu)
- Assert resets in suspend path in reverse order they were deasserted
during probe (John Madieu)
- Rework inbound window algorithm to prevent mapping more than
intended region and enforce alignment on size, to prepare for
RZ/G3E support (John Madieu)
Rockchip DesignWare PCIe controller driver:
- Add tracepoints for PCIe controller LTSSM transitions and link rate
changes (Shawn Lin)
- Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn
Lin)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that
advertise support for them (Yao Zi)
Synopsys DesignWare PCIe controller driver:
- Continue with system suspend even if an Endpoint doesn't respond
with PME_TO_Ack message (Manivannan Sadhasivam)
- Set Endpoint MSI-X Table Size in the correct function of a
multi-function device when configuring MSI-X, not in Function 0
(Aksh Garg)
- Set Max Link Width and Max Link Speed for all functions of a
multi-function device, not just Function 0 (Aksh Garg)
- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)
Miscellaneous:
- Warn only once about invalid ACS kernel parameter format (Richard
Cheng)
- Suppress FW_BUG warning when writing sysfs 'numa_node' with the
current value (Li RongQing)
- Drop redundant 'depends on PCI' from Kconfig (Julian Braha)"
* tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (165 commits)
PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list
PCI/P2PDMA: Allow wildcard Device IDs in host bridge list
PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
PCI: tegra194: Add core monitor clock support
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
PCI: tegra194: Assert CLKREQ# explicitly by default
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
PCI: tegra194: Use DWC IP core version
PCI: tegra194: Free up Endpoint resources during remove()
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
PCI: tegra194: Disable direct speed change for Endpoint mode
PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "maple_tree: Replace big node with maple copy" (Liam Howlett)
Mainly prepararatory work for ongoing development but it does reduce
stack usage and is an improvement.
- "mm, swap: swap table phase III: remove swap_map" (Kairui Song)
Offers memory savings by removing the static swap_map. It also yields
some CPU savings and implements several cleanups.
- "mm: memfd_luo: preserve file seals" (Pratyush Yadav)
File seal preservation to LUO's memfd code
- "mm: zswap: add per-memcg stat for incompressible pages" (Jiayuan
Chen)
Additional userspace stats reportng to zswap
- "arch, mm: consolidate empty_zero_page" (Mike Rapoport)
Some cleanups for our handling of ZERO_PAGE() and zero_pfn
- "mm/kmemleak: Improve scan_should_stop() implementation" (Zhongqiu
Han)
A robustness improvement and some cleanups in the kmemleak code
- "Improve khugepaged scan logic" (Vernon Yang)
Improve khugepaged scan logic and reduce CPU consumption by
prioritizing scanning tasks that access memory frequently
- "Make KHO Stateless" (Jason Miu)
Simplify Kexec Handover by transitioning KHO from an xarray-based
metadata tracking system with serialization to a radix tree data
structure that can be passed directly to the next kernel
- "mm: vmscan: add PID and cgroup ID to vmscan tracepoints" (Thomas
Ballasi and Steven Rostedt)
Enhance vmscan's tracepointing
- "mm: arch/shstk: Common shadow stack mapping helper and
VM_NOHUGEPAGE" (Catalin Marinas)
Cleanup for the shadow stack code: remove per-arch code in favour of
a generic implementation
- "Fix KASAN support for KHO restored vmalloc regions" (Pasha Tatashin)
Fix a WARN() which can be emitted the KHO restores a vmalloc area
- "mm: Remove stray references to pagevec" (Tal Zussman)
Several cleanups, mainly udpating references to "struct pagevec",
which became folio_batch three years ago
- "mm: Eliminate fake head pages from vmemmap optimization" (Kiryl
Shutsemau)
Simplify the HugeTLB vmemmap optimization (HVO) by changing how tail
pages encode their relationship to the head page
- "mm/damon/core: improve DAMOS quota efficiency for core layer
filters" (SeongJae Park)
Improve two problematic behaviors of DAMOS that makes it less
efficient when core layer filters are used
- "mm/damon: strictly respect min_nr_regions" (SeongJae Park)
Improve DAMON usability by extending the treatment of the
min_nr_regions user-settable parameter
- "mm/page_alloc: pcp locking cleanup" (Vlastimil Babka)
The proper fix for a previously hotfixed SMP=n issue. Code
simplifications and cleanups ensued
- "mm: cleanups around unmapping / zapping" (David Hildenbrand)
A bunch of cleanups around unmapping and zapping. Mostly
simplifications, code movements, documentation and renaming of
zapping functions
- "support batched checking of the young flag for MGLRU" (Baolin Wang)
Batched checking of the young flag for MGLRU. It's part cleanups; one
benchmark shows large performance benefits for arm64
- "memcg: obj stock and slab stat caching cleanups" (Johannes Weiner)
memcg cleanup and robustness improvements
- "Allow order zero pages in page reporting" (Yuvraj Sakshith)
Enhance free page reporting - it is presently and undesirably order-0
pages when reporting free memory.
- "mm: vma flag tweaks" (Lorenzo Stoakes)
Cleanup work following from the recent conversion of the VMA flags to
a bitmap
- "mm/damon: add optional debugging-purpose sanity checks" (SeongJae
Park)
Add some more developer-facing debug checks into DAMON core
- "mm/damon: test and document power-of-2 min_region_sz requirement"
(SeongJae Park)
An additional DAMON kunit test and makes some adjustments to the
addr_unit parameter handling
- "mm/damon/core: make passed_sample_intervals comparisons
overflow-safe" (SeongJae Park)
Fix a hard-to-hit time overflow issue in DAMON core
- "mm/damon: improve/fixup/update ratio calculation, test and
documentation" (SeongJae Park)
A batch of misc/minor improvements and fixups for DAMON
- "mm: move vma_(kernel|mmu)_pagesize() out of hugetlb.c" (David
Hildenbrand)
Fix a possible issue with dax-device when CONFIG_HUGETLB=n. Some code
movement was required.
- "zram: recompression cleanups and tweaks" (Sergey Senozhatsky)
A somewhat random mix of fixups, recompression cleanups and
improvements in the zram code
- "mm/damon: support multiple goal-based quota tuning algorithms"
(SeongJae Park)
Extend DAMOS quotas goal auto-tuning to support multiple tuning
algorithms that users can select
- "mm: thp: reduce unnecessary start_stop_khugepaged()" (Breno Leitao)
Fix the khugpaged sysfs handling so we no longer spam the logs with
reams of junk when starting/stopping khugepaged
- "mm: improve map count checks" (Lorenzo Stoakes)
Provide some cleanups and slight fixes in the mremap, mmap and vma
code
- "mm/damon: support addr_unit on default monitoring targets for
modules" (SeongJae Park)
Extend the use of DAMON core's addr_unit tunable
- "mm: khugepaged cleanups and mTHP prerequisites" (Nico Pache)
Cleanups to khugepaged and is a base for Nico's planned khugepaged
mTHP support
- "mm: memory hot(un)plug and SPARSEMEM cleanups" (David Hildenbrand)
Code movement and cleanups in the memhotplug and sparsemem code
- "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and cleanup
CONFIG_MIGRATION" (David Hildenbrand)
Rationalize some memhotplug Kconfig support
- "change young flag check functions to return bool" (Baolin Wang)
Cleanups to change all young flag check functions to return bool
- "mm/damon/sysfs: fix memory leak and NULL dereference issues" (Josh
Law and SeongJae Park)
Fix a few potential DAMON bugs
- "mm/vma: convert vm_flags_t to vma_flags_t in vma code" (Lorenzo
Stoakes)
Convert a lot of the existing use of the legacy vm_flags_t data type
to the new vma_flags_t type which replaces it. Mainly in the vma
code.
- "mm: expand mmap_prepare functionality and usage" (Lorenzo Stoakes)
Expand the mmap_prepare functionality, which is intended to replace
the deprecated f_op->mmap hook which has been the source of bugs and
security issues for some time. Cleanups, documentation, extension of
mmap_prepare into filesystem drivers
- "mm/huge_memory: refactor zap_huge_pmd()" (Lorenzo Stoakes)
Simplify and clean up zap_huge_pmd(). Additional cleanups around
vm_normal_folio_pmd() and the softleaf functionality are performed.
* tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm: fix deferred split queue races during migration
mm/khugepaged: fix issue with tracking lock
mm/huge_memory: add and use has_deposited_pgtable()
mm/huge_memory: add and use normal_or_softleaf_folio_pmd()
mm: add softleaf_is_valid_pmd_entry(), pmd_to_softleaf_folio()
mm/huge_memory: separate out the folio part of zap_huge_pmd()
mm/huge_memory: use mm instead of tlb->mm
mm/huge_memory: remove unnecessary sanity checks
mm/huge_memory: deduplicate zap deposited table call
mm/huge_memory: remove unnecessary VM_BUG_ON_PAGE()
mm/huge_memory: add a common exit path to zap_huge_pmd()
mm/huge_memory: handle buggy PMD entry in zap_huge_pmd()
mm/huge_memory: have zap_huge_pmd return a boolean, add kdoc
mm/huge: avoid big else branch in zap_huge_pmd()
mm/huge_memory: simplify vma_is_specal_huge()
mm: on remap assert that input range within the proposed VMA
mm: add mmap_action_map_kernel_pages[_full]()
uio: replace deprecated mmap hook with mmap_prepare in uio_info
drivers: hv: vmbus: replace deprecated mmap hook with mmap_prepare
mm: allow handling of stacked mmap_prepare hooks in more drivers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu update from Greg Ungerer:
- fix task info flags handling for 68000 nommu
* tag 'm68knommu-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: Fix task info flags handling for 68000
|
|
Register the "qemu-virt-ctrl" platform device during board
initialization to utilize the new generic power/reset driver.
Consequently, remove the legacy reset and power-off implementations
specific to the virt machine. The platform's mach_reset callback is
updated to call do_kernel_restart(), bridging the legacy m68k reboot
path to the generic kernel restart handler framework for this machine.
To prevent any regressions in reboot or power-off functionality when
the driver is not built-in, explicitly select POWER_RESET and
POWER_RESET_QEMU_VIRT_CTRL for the VIRT machine in Kconfig.machine.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/20260412211952.3564033-3-visitorckw@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
- Restore the state of the standard black-and-white and 16-color Linux
logos (no longer auto-enabled since commit 994fcd4b107d747b
("video/logo: don't select LOGO_LINUX_MONO and LOGO_LINUX_VGA16 by
default")).
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/67dd5553e9289757c274d79ce1b13fca33fde25d.1772446429.git.geert@linux-m68k.org
|
|
Replace unbounded sprintf() with the safer snprintf().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/20260318001632.2974-3-thorsten.blum@linux.dev
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Remove the "michael_mic" crypto_shash algorithm, since it's no longer
used. Its only users were wireless drivers, which have now been
converted to use the michael_mic() function instead.
It makes sense that no other users ever appeared: Michael MIC is an
insecure algorithm that is specific to WPA TKIP, which itself was an
interim security solution to replace the broken WEP standard.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://patch.msgid.link/20260408030651.80336-7-ebiggers@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The logic for deciding what to do after a syscall should be checking
if any of the lower byte bits are set and then checking if the reschedule
bit is set.
Currently we are loading the top word, checking if any bits are set
(which never seems to be true) and thus jumping over loading the
whole long and checking if the reschedule bit is set.
We get the thread info in two places so split that logic out in
a macro and then fix the code so that it loads the byte of the flags
we need to check, checks if anything is set and then checks if
the reschedule bit in particular is set.
Reported-by: Christoph Plattner <christoph.plattner@gmx.at>
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Greg Ungerer <gerg@kernel.org>
|
|
Reduce 22 declarations of empty_zero_page to 3 and 23 declarations of
ZERO_PAGE() to 4.
Every architecture defines empty_zero_page that way or another, but for the
most of them it is always a page aligned page in BSS and most definitions
of ZERO_PAGE do virt_to_page(empty_zero_page).
Move Linus vetted x86 definition of empty_zero_page and ZERO_PAGE() to the
core MM and drop these definitions in architectures that do not implement
colored zero page (MIPS and s390).
ZERO_PAGE() remains a macro because turning it to a wrapper for a static
inline causes severe pain in header dependencies.
For the most part the change is mechanical, with these being noteworthy:
* alpha: aliased empty_zero_page with ZERO_PGE that was also used for boot
parameters. Switching to a generic empty_zero_page removes the aliasing
and keeps ZERO_PGE for boot parameters only
* arm64: uses __pa_symbol() in ZERO_PAGE() so that definition of
ZERO_PAGE() is kept intact.
* m68k/parisc/um: allocated empty_zero_page from memblock,
although they do not support zero page coloring and having it in BSS
will work fine.
* sparc64 can have empty_zero_page in BSS rather allocate it, but it
can't use virt_to_page() for BSS. Keep it's definition of ZERO_PAGE()
but instead of allocating it, make mem_map_zero point to
empty_zero_page.
* sh: used empty_zero_page for boot parameters at the very early boot.
Rename the parameters page to boot_params_page and let sh use the generic
empty_zero_page.
* hexagon: had an amusing comment about empty_zero_page
/* A handy thing to have if one has the RAM. Declared in head.S */
that unfortunately had to go :)
Link: https://lkml.kernel.org/r/20260211103141.3215197-4-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Helge Deller <deller@gmx.de> [parisc]
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Magnus Lindholm <linmag7@gmail.com> [alpha]
Acked-by: Dinh Nguyen <dinguyen@kernel.org> [nios2]
Acked-by: Andreas Larsson <andreas@gaisler.com> [sparc]
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
ucontext.h should be an UAPI header as it is used for the kernel's
signal handling interface.
Move the header to the uapi/ directory.
While at it, also add some necessary includes to the new header.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/20260314-uapi-ucontext-m68k-v1-1-1b8b0e082b79@weissschuh.net
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
According to "HP 9000 Series 300 Computers: Video Signals and
Monitors"[1], HP Topcat and Catseye graphics hardware varieties support
monochrome, 16-color, 64-color, and 256-color displays. Hence enable the
standard black-and-white and 16-color Linux logos, too.
[1] https://www.hp-series300.net/docs/monitors.pdf
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/51190cab2bb1adb9554aaaba9fae54342653a338.1772446429.git.geert@linux-m68k.org
|
|
The pr_info() call has been commented out and printq40() has been
disabled ever since commit 1da177e4c3f4 ("Linux-2.6.12-rc2").
Remove both.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/20260223074311.322070-2-thorsten.blum@linux.dev
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Maintaining a modular IPv6 stack offers image size savings for specific
setups, this benefit is outweighed by the architectural burden it
imposes on the subsystems on implementation and maintenance. Therefore,
drop it.
Change CONFIG_IPV6 from tristate to bool. Remove all Kconfig
dependencies across the tree that explicitly checked for IPV6=m. In
addition, remove MODULE_DESCRIPTION(), MODULE_ALIAS(), MODULE_AUTHOR()
and MODULE_LICENSE().
This is also replacing module_init() by device_initcall(). It is not
possible to use fs_initcall() as IPv4 does because that creates a race
condition on IPv6 addrconf.
Finally, modify the default configs from CONFIG_IPV6=m to CONFIG_IPV6=y
except for m68k as according to the bloat-o-meter the image is
increasing by 330KB~ and that isn't acceptable. Instead, disable IPv6 on
this architecture by default. This is aligned with m68k RAM requirements
and recommendations [1].
[1] http://www.linux-m68k.org/faq/ram.html
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # arm64
Link: https://patch.msgid.link/20260325120928.15848-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a bridge window contains big and small resource(s), the small
resource(s) may not amount to the half of the size of the big resource
which would allow calculate_head_align() to shrink the head alignment.
This results in always placing the small resource(s) after the big
resource.
In general, it would be good to be able to place the small resource(s)
before the big resource to achieve better utilization of the address space.
In the cases where the large resource can only fit at the end of the
window, it is even required.
However, carrying the information over from pbus_size_mem() and
calculate_head_align() to __pci_assign_resource() and
pcibios_align_resource() is not easy with the current data structures.
A somewhat hacky way to move the non-aligning tail part to the head is
possible within pcibios_align_resource(). The free space between the start
of the free space span and the aligned start address can be compared with
the non-aligning remainder of the size. If the free space is larger than
the remainder, placing the remainder before the start address is possible.
This relocation should generally work, because PCI resources consist only
power-of-2 atoms.
Various arch requirements may still need to override the relocation, so the
relocation is only applied selectively in such cases.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221205
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-10-ilpo.jarvinen@linux.intel.com
|
|
Aligning res->start by align inside pcibios_align_resource() is unnecessary
because caller of pcibios_align_resource() is __find_resource_space() that
aligns res->start with align before calling pcibios_align_resource().
Aligning by align in case of IORESOURCE_IO && start & 0x300 cannot ever
result in changing start either because 0x300 bits would have not survived
the earlier alignment if align was large enough to have an impact.
Thus, remove the duplicated aligning from pcibios_align_resource().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Link: https://patch.msgid.link/20260324165633.4583-6-ilpo.jarvinen@linux.intel.com
|
|
__find_resource_space() calculates the full extent of empty space but only
passes the aligned space to resource_alignf callback. In some situations,
the callback may choose take advantage of the free space before the
requested alignment.
Pass the full extent of the calculated empty space to resource_alignf
callback as an additional parameter.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-3-ilpo.jarvinen@linux.intel.com
|
|
The kconfig options for generic crypto API modules have traditionally
*not* had a "_GENERIC" suffix. Also, the "_GENERIC" suffix will make
even less sense once the architecture-optimized SM3 code is moved into
lib/crypto/ and the "sm3" crypto_shash is reimplemented on top of that.
Thus, rename CRYPTO_SM3_GENERIC to CRYPTO_SM3.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260321040935.410034-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Commit 3e86e4d74c04 ("kbuild: keep .modinfo section in
vmlinux.unstripped") added .modinfo to ELF_DETAILS while removing it
from COMMON_DISCARDS, as it was needed in vmlinux.unstripped and
ELF_DETAILS was present in all architecture specific vmlinux linker
scripts. While this shuffle is fine for vmlinux, ELF_DETAILS and
COMMON_DISCARDS may be used by other linker scripts, such as the s390
and x86 compressed boot images, which may not expect to have a .modinfo
section. In certain circumstances, this could result in a bootloader
failing to load the compressed kernel [1].
Commit ddc6cbef3ef1 ("s390/boot/vmlinux.lds.S: Ensure bzImage ends with
SecureBoot trailer") recently addressed this for the s390 bzImage but
the same bug remains for arm, parisc, and x86. The presence of .modinfo
in the x86 bzImage was the root cause of the issue worked around with
commit d50f21091358 ("kbuild: align modinfo section for Secureboot
Authenticode EDK2 compat"). misc.c in arch/x86/boot/compressed includes
lib/decompress_unzstd.c, which in turn includes lib/xxhash.c and its
MODULE_LICENSE / MODULE_DESCRIPTION macros due to the STATIC definition.
Split .modinfo out from ELF_DETAILS into its own macro and handle it in
all vmlinux linker scripts. Discard .modinfo in the places where it was
previously being discarded from being in COMMON_DISCARDS, as it has
never been necessary in those uses.
Cc: stable@vger.kernel.org
Fixes: 3e86e4d74c04 ("kbuild: keep .modinfo section in vmlinux.unstripped")
Reported-by: Ed W <lists@wildgooses.com>
Closes: https://lore.kernel.org/587f25e0-a80e-46a5-9f01-87cb40cfa377@wildgooses.com/ [1]
Tested-by: Ed W <lists@wildgooses.com> # x86_64
Link: https://patch.msgid.link/20260225-separate-modinfo-from-elf-details-v1-1-387ced6baf4b@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
- defconfig cleanup
- fix for legacy 68000 CPU memmove() of non-aligned pointers
- replace strcpy() with strscpy() for ucsimm target
* tag 'm68knommu-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: Replace deprecated strcpy with strscpy in init_ucsimm
m68k: nommu: fix memmove() with differently aligned src and dest for 68000
m68k: defconfig: Clean up references to non-existing configs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
performs maintenance work on the DAMON documentation (SeongJae Park)
- "mm: add and use vma_assert_stabilised() helper" refactors and cleans
up the core VMA code. The main aim here is to be able to use the mmap
write lock's lockdep state to perform various assertions regarding
the locking which the VMA code requires (Lorenzo Stoakes)
- "mm, swap: swap table phase II: unify swapin use" removes some old
swap code (swap cache bypassing and swap synchronization) which
wasn't working very well. Various other cleanups and simplifications
were made. The end result is a 20% speedup in one benchmark (Kairui
Song)
- "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
available on 64-bit alpha, loongarch, mips, parisc, and um. Various
cleanups were performed along the way (Qi Zheng)
* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
mm/memory: handle non-split locks correctly in zap_empty_pte_table()
mm: move pte table reclaim code to memory.c
mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
um: mm: enable MMU_GATHER_RCU_TABLE_FREE
parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
zsmalloc: make common caches global
mm: add SPDX id lines to some mm source files
mm/zswap: use %pe to print error pointers
mm/vmscan: use %pe to print error pointers
mm/readahead: fix typo in comment
mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
mm: refactor vma_map_pages to use vm_insert_pages
mm/damon: unify address range representation with damon_addr_range
mm/cma: replace snprintf with strscpy in cma_new_area
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Scheduler Kconfig space updates:
- Further consolidate configurable preemption modes (Peter Zijlstra)
Reduce the number of architectures that are allowed to offer
PREEMPT_NONE and PREEMPT_VOLUNTARY, reducing the number of
preemption models from four to just two: 'full' and 'lazy' on
up-to-date architectures (arm64, loongarch, powerpc, riscv, s390,
x86).
None and voluntary are only available as legacy features on
platforms that don't implement lazy preemption yet, or which don't
even support preemption.
The goal is to eventually remove cond_resched() and voluntary
preemption altogether.
RSEQ based 'scheduler time slice extension' support (Thomas Gleixner
and Peter Zijlstra):
This allows a thread to request a time slice extension when it enters
a critical section to avoid contention on a resource when the thread
is scheduled out inside of the critical section.
- Add fields and constants for time slice extension
- Provide static branch for time slice extensions
- Add statistics for time slice extensions
- Add prctl() to enable time slice extensions
- Implement sys_rseq_slice_yield()
- Implement syscall entry work for time slice extensions
- Implement time slice extension enforcement timer
- Reset slice extension when scheduled
- Implement rseq_grant_slice_extension()
- entry: Hook up rseq time slice extension
- selftests: Implement time slice extension test
- Allow registering RSEQ with slice extension
- Move slice_ext_nsec to debugfs
- Lower default slice extension
- selftests/rseq: Add rseq slice histogram script
Scheduler performance/scalability improvements:
- Update rq->avg_idle when a task is moved to an idle CPU, which
improves the scalability of various workloads (Shubhang Kaushik)
- Reorder fields in 'struct rq' for better caching (Blake Jones)
- Fair scheduler SMP NOHZ balancing code speedups (Shrikanth Hegde):
- Move checking for nohz cpus after time check
- Change likelyhood of nohz.nr_cpus
- Remove nohz.nr_cpus and use weight of cpumask instead
- Avoid false sharing for sched_clock_irqtime (Wangyang Guo)
- Cleanups (Yury Norov):
- Drop useless cpumask_empty() in find_energy_efficient_cpu()
- Simplify task_numa_find_cpu()
- Use cpumask_weight_and() in sched_balance_find_dst_group()
DL scheduler updates:
- Add a deadline server for sched_ext tasks (by Andrea Righi and Joel
Fernandes, with fixes by Peter Zijlstra)
RT scheduler updates:
- Skip currently executing CPU in rto_next_cpu() (Chen Jinghuang)
Entry code updates and performance improvements (Jinjie Ruan)
This is part of the scheduler tree in this cycle due to inter-
dependencies with the RSEQ based time slice extension work:
- Remove unused syscall argument from syscall_trace_enter()
- Rework syscall_exit_to_user_mode_work() for architecture reuse
- Add arch_ptrace_report_syscall_entry/exit()
- Inline syscall_exit_work() and syscall_trace_enter()
Scheduler core updates (Peter Zijlstra):
- Rework sched_class::wakeup_preempt() and rq_modified_*()
- Avoid rq->lock bouncing in sched_balance_newidle()
- Rename rcu_dereference_check_sched_domain() =>
rcu_dereference_sched_domain()
- <linux/compiler_types.h>: Add the __signed_scalar_typeof() helper
Fair scheduler updates/refactoring (Peter Zijlstra and Ingo Molnar):
- Fold the sched_avg update
- Change rcu_dereference_check_sched_domain() to rcu-sched
- Switch to rcu_dereference_all()
- Remove superfluous rcu_read_lock()
- Limit hrtick work
- Join two #ifdef CONFIG_FAIR_GROUP_SCHED blocks
- Clean up comments in 'struct cfs_rq'
- Separate se->vlag from se->vprot
- Rename cfs_rq::avg_load to cfs_rq::sum_weight
- Rename cfs_rq::avg_vruntime to ::sum_w_vruntime & helper functions
- Introduce and use the vruntime_cmp() and vruntime_op() wrappers for
wrapped-signed aritmetics
- Sort out 'blocked_load*' namespace noise
Scheduler debugging code updates:
- Export hidden tracepoints to modules (Gabriele Monaco)
- Convert copy_from_user() + kstrtouint() to kstrtouint_from_user()
(Fushuai Wang)
- Add assertions to QUEUE_CLASS (Peter Zijlstra)
- hrtimer: Fix tracing oddity (Thomas Gleixner)
Misc fixes and cleanups:
- Re-evaluate scheduling when migrating queued tasks out of throttled
cgroups (Zicheng Qu)
- Remove task_struct->faults_disabled_mapping (Christoph Hellwig)
- Fix math notation errors in avg_vruntime comment (Zhan Xusheng)
- sched/cpufreq: Use %pe format for PTR_ERR() printing
(zenghongling)"
* tag 'sched-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
sched: Re-evaluate scheduling when migrating queued tasks out of throttled cgroups
sched/cpufreq: Use %pe format for PTR_ERR() printing
sched/rt: Skip currently executing CPU in rto_next_cpu()
sched/clock: Avoid false sharing for sched_clock_irqtime
selftests/sched_ext: Add test for DL server total_bw consistency
selftests/sched_ext: Add test for sched_ext dl_server
sched/debug: Fix dl_server (re)start conditions
sched/debug: Add support to change sched_ext server params
sched_ext: Add a DL server for sched_ext tasks
sched/debug: Stop and start server based on if it was active
sched/debug: Fix updating of ppos on server write ops
sched/deadline: Clear the defer params
entry: Inline syscall_exit_work() and syscall_trace_enter()
entry: Add arch_ptrace_report_syscall_entry/exit()
entry: Rework syscall_exit_to_user_mode_work() for architecture reuse
entry: Remove unused syscall argument from syscall_trace_enter()
sched: remove task_struct->faults_disabled_mapping
sched: Update rq->avg_idle when a task is moved to an idle CPU
selftests/rseq: Add rseq slice histogram script
hrtimer: Fix trace oddity
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
- Add support for verifying ML-DSA signatures.
ML-DSA (Module-Lattice-Based Digital Signature Algorithm) is a
recently-standardized post-quantum (quantum-resistant) signature
algorithm. It was known as Dilithium pre-standardization.
The first use case in the kernel will be module signing. But there
are also other users of RSA and ECDSA signatures in the kernel that
might want to upgrade to ML-DSA eventually.
- Improve the AES library:
- Make the AES key expansion and single block encryption and
decryption functions use the architecture-optimized AES code.
Enable these optimizations by default.
- Support preparing an AES key for encryption-only, using about
half as much memory as a bidirectional key.
- Replace the existing two generic implementations of AES with a
single one.
- Simplify how Adiantum message hashing is implemented. Remove the
"nhpoly1305" crypto_shash in favor of direct lib/crypto/ support for
NH hashing, and enable optimizations by default.
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (53 commits)
lib/crypto: mldsa: Clarify the documentation for mldsa_verify() slightly
lib/crypto: aes: Drop 'volatile' from aes_sbox and aes_inv_sbox
lib/crypto: aes: Remove old AES en/decryption functions
lib/crypto: aesgcm: Use new AES library API
lib/crypto: aescfb: Use new AES library API
crypto: omap - Use new AES library API
crypto: inside-secure - Use new AES library API
crypto: drbg - Use new AES library API
crypto: crypto4xx - Use new AES library API
crypto: chelsio - Use new AES library API
crypto: ccp - Use new AES library API
crypto: x86/aes-gcm - Use new AES library API
crypto: arm64/ghash - Use new AES library API
crypto: arm/ghash - Use new AES library API
staging: rtl8723bs: core: Use new AES library API
net: phy: mscc: macsec: Use new AES library API
chelsio: Use new AES library API
Bluetooth: SMP: Use new AES library API
crypto: x86/aes - Remove the superseded AES-NI crypto_cipher
lib/crypto: x86/aes: Add AES-NI optimization
...
|
|
To initialize node, zone and memory map data structures every architecture
calls free_area_init() during setup_arch() and passes it an array of zone
limits.
Beside code duplication it creates "interesting" ordering cases between
allocation and initialization of hugetlb and the memory map. Some
architectures allocate hugetlb pages very early in setup_arch() in certain
cases, some only create hugetlb CMA areas in setup_arch() and sometimes
hugetlb allocations happen mm_core_init().
With arch_zone_limits_init() helper available now on all architectures it
is no longer necessary to call free_area_init() from architecture setup
code. Rather core MM initialization can call arch_zone_limits_init() in a
single place.
This allows to unify ordering of hugetlb vs memory map allocation and
initialization.
Remove the call to free_area_init() from architecture specific code and
place it in a new mm_core_init_early() function that is called immediately
after setup_arch().
After this refactoring it is possible to consolidate hugetlb allocations
and eliminate differences in ordering of hugetlb and memory map
initialization among different architectures.
As the first step of this consolidation move hugetlb_bootmem_alloc() to
mm_core_early_init().
Link: https://lkml.kernel.org/r/20260111082105.290734-24-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move calculations of zone limits to a dedicated arch_zone_limits_init()
function.
Later MM core will use this function as an architecture specific callback
during nodes and zones initialization and thus there won't be a need to
call free_area_init() from every architecture.
Since all variants of m68k add all memory to ZONE_DMA, it is possible to
use unified implementation for arch_zone_limits_init() that sets the end
of ZONE_DMA to memblock_end_of_DRAM().
Link: https://lkml.kernel.org/r/20260111082105.290734-10-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch converts the existing glob selftest (lib/globtest.c) to use the
KUnit framework (lib/tests/glob_kunit.c).
The new test:
- Migrates all 64 test cases from the original test to the KUnit suite.
- Removes the custom 'verbose' module parameter as KUnit handles logging.
- Updates Kconfig.debug and Makefile to support the new KUnit test.
- Updates Kconfig and Makefile to remove the original selftest.
- Updates GLOB_SELFTEST to GLOB_KUNIT_TEST for arch/m68k/configs.
This commit is verified by `./tools/testing/kunit/kunit.py run'
with the .kunit/.kunitconfig:
CONFIG_KUNIT=y
CONFIG_GLOB_KUNIT_TEST=y
Link: https://lkml.kernel.org/r/20260108120753.27339-1-note351@hotmail.com
Signed-off-by: Kir Chou <note351@hotmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: <kirchou@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move lib/test_min_heap.c to lib/tests/min_heap_kunit.c and convert it to
use KUnit.
This change switches the ad-hoc test code to standard KUnit test cases.
The test data remains the same, but the verification logic is updated to
use KUNIT_EXPECT_* macros.
Also remove CONFIG_TEST_MIN_HEAP from arch/*/configs/* because it is no
longer used. The new CONFIG_MIN_HEAP_KUNIT_TEST will be automatically
enabled by CONFIG_KUNIT_ALL_TESTS.
The reasons for converting to KUnit are:
1. Standardization:
Switching from ad-hoc printk-based reporting to the standard
KTAP format makes it easier for CI systems to parse and report test
results
2. Better Diagnostics:
Using KUNIT_EXPECT_* macros automatically provides detailed
diagnostics on failure.
3. Tooling Integration:
It allows the test to be managed and executed using standard
KUnit tools.
Link: https://lkml.kernel.org/r/20251221133516.321846-1-sakamo.ryota@gmail.com
Signed-off-by: Ryota Sakamoto <sakamo.ryota@gmail.com>
Acked-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: David Gow <davidgow@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
strcpy() has been deprecated [1] because it performs no bounds checking
on the destination buffer, which can lead to buffer overflows. Replace
it with the safer strscpy().
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1]
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Greg Ungerer <gerg@kernel.org>
|
|
68000 has different alignment needs to 68020+.
memcpy() checks if the destination is aligned and does a smaller copy
to fix the alignment and then critically for 68000 it checks if the
source is still unaligned and if it is reverts to smaller copies.
memmove() does not currently do the second part and malfunctions if
one of the pointers is aligned and the other isn't.
This is apparently getting triggered by printk. If I put breakpoints
into the new checks added by this commit the first hit looks like this:
memmove (n=205, src=0x2f3971 <printk_shared_pbufs+205>, dest=0x2f3980 <printk_shared_pbufs+220>) at arch/m68k/lib/memmove.c:82
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Signed-off-by: Greg Ungerer <gerg@kernel.org>
|
|
- Drop 'CONFIG_I2C_COMPAT is not set' (removed in commit 7e722083fcc3
("i2c: Remove I2C_COMPAT config symbol and related code"))
- Drop 'CONFIG_SCHED_DEBUG is not set' (removed in commit b52173065e0a
("sched/debug: Remove CONFIG_SCHED_DEBUG"))
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
|
|
vsprintf() performs no bounds checking and can overflow - replace it
with the safer vsnprintf().
Also remove the useless '+ 1' that is a leftover of commit 66ed28ea096c
("m68k: sun3: Remove unused vsprintf() return value in prom_printf()").
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/20260117202152.1036278-2-thorsten.blum@linux.dev
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Provide a new syscall which has the only purpose to yield the CPU after the
kernel granted a time slice extension.
sched_yield() is not suitable for that because it unconditionally
schedules, but the end of the time slice extension is not required to
schedule when the task was already preempted. This also allows to have a
strict check for termination to catch user space invoking random syscalls
including sched_yield() from a time slice extension region.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251215155708.929634896@linutronix.de
|
|
Move lib/test_uuid.c to lib/tests/uuid_kunit.c and convert it to use KUnit.
This change switches the ad-hoc test code to standard KUnit test cases.
The test data remains the same, but the verification logic is updated to
use KUNIT_EXPECT_* macros.
Also remove CONFIG_TEST_UUID from arch/*/configs/* because it is no longer
used. The new CONFIG_UUID_KUNIT_TEST will be automatically enabled by
CONFIG_KUNIT_ALL_TESTS.
[lukas.bulwahn@redhat.com: MAINTAINERS: adjust file entry in UUID HELPERS]
Link: https://lkml.kernel.org/r/20251217053907.2778515-1-lukas.bulwahn@redhat.com
Link: https://lkml.kernel.org/r/20251215134322.12949-1-sakamo.ryota@gmail.com
Signed-off-by: Ryota Sakamoto <sakamo.ryota@gmail.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: David Gow <davidgow@google.com>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: folio_zero_user: clear page ranges", v11.
This series adds clearing of contiguous page ranges for hugepages.
The series improves on the current discontiguous clearing approach in two
ways:
- clear pages in a contiguous fashion.
- use batched clearing via clear_pages() wherever exposed.
The first is useful because it allows us to make much better use of
hardware prefetchers.
The second, enables advertising the real extent to the processor. Where
specific instructions support it (ex. string instructions on x86; "mops"
on arm64 etc), a processor can optimize based on this because, instead of
seeing a sequence of 8-byte stores, or a sequence of 4KB pages, it sees a
larger unit being operated on.
For instance, AMD Zen uarchs (for extents larger than LLC-size) switch to
a mode where they start eliding cacheline allocation. This is helpful not
just because it results in higher bandwidth, but also because now the
cache is not evicting useful cachelines and replacing them with zeroes.
Demand faulting a 64GB region shows performance improvement:
$ perf bench mem mmap -p $pg-sz -f demand -s 64GB -l 5
baseline +series
(GBps +- %stdev) (GBps +- %stdev)
pg-sz=2MB 11.76 +- 1.10% 25.34 +- 1.18% [*] +115.47% preempt=*
pg-sz=1GB 24.85 +- 2.41% 39.22 +- 2.32% + 57.82% preempt=none|voluntary
pg-sz=1GB (similar) 52.73 +- 0.20% [#] +112.19% preempt=full|lazy
[*] This improvement is because switching to sequential clearing
allows the hardware prefetchers to do a much better job.
[#] For pg-sz=1GB a large part of the improvement is because of the
cacheline elision mentioned above. preempt=full|lazy improves upon
that because, not needing explicit invocations of cond_resched() to
ensure reasonable preemption latency, it can clear the full extent
as a single unit. In comparison the maximum extent used for
preempt=none|voluntary is PROCESS_PAGES_NON_PREEMPT_BATCH (32MB).
When provided the full extent the processor forgoes allocating
cachelines on this path almost entirely.
(The hope is that eventually, in the fullness of time, the lazy
preemption model will be able to do the same job that none or
voluntary models are used for, allowing us to do away with
cond_resched().)
Raghavendra also tested previous version of the series on AMD Genoa and
sees similar improvement [1] with preempt=lazy.
$ perf bench mem map -p $page-size -f populate -s 64GB -l 10
base patched change
pg-sz=2MB 12.731939 GB/sec 26.304263 GB/sec 106.6%
pg-sz=1GB 26.232423 GB/sec 61.174836 GB/sec 133.2%
This patch (of 8):
Let's drop all variants that effectively map to clear_page() and provide
it in a generic variant instead.
We'll use the macro clear_user_page to indicate whether an architecture
provides it's own variant.
Also, clear_user_page() is only called from the generic variant of
clear_user_highpage(), so define it only if the architecture does not
provide a clear_user_highpage(). And, for simplicity define it in
linux/highmem.h.
Note that for parisc, clear_page() and clear_user_page() map to
clear_page_asm(), so we can just get rid of the custom clear_user_page()
implementation. There is a clear_user_page_asm() function on parisc, that
seems to be unused. Not sure what's up with that.
Link: https://lkml.kernel.org/r/20260107072009.1615991-1-ankur.a.arora@oracle.com
Link: https://lkml.kernel.org/r/20260107072009.1615991-2-ankur.a.arora@oracle.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Co-developed-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ankur Arora <ankur.a.arora@oracle.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzessutek Wilk <konrad.wilk@oracle.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Li Zhe <lizhe.67@bytedance.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove aes-fixed-time, i.e. CONFIG_CRYPTO_AES_TI. This was a wrapper
around the 256-byte-table-based AES implementation in lib/crypto/aes.c,
with extra code to enable and disable IRQs for constant-time hardening.
While nice in theory, in practice this had the following issues:
- For bulk en/decryption it was 2-4 times slower than aes-generic. This
resulted in aes-generic still being needed, creating fragmentation.
- Having both aes-generic and aes-fixed-time punted an AES
implementation decision to distros and users who are generally
unprepared to handle it. In practice, whether aes-fixed-time gets
used tends to be incidental and not match an explicit distro or user
intent. (While aes-fixed-time has a higher priority than aes-generic,
whether it actually gets enabled, loaded, and used depends on the
kconfig and whether a modprobe of "aes" happens to be done. It also
has a lower priority than aes-arm and aes-arm64.)
- My changes to the generic AES code (in other commits) significantly
close the gap with aes-fixed-time anyway. The table size is reduced
from 8192 bytes to 1024 bytes, and prefetching is added.
- While AES code *should* be constant-time, the real solutions for that
are AES instructions (which most CPUs have now) or bit-slicing. arm
and arm64 already have bit-sliced AES code for many modes; generic
bit-sliced code could be written but would be very slow for single
blocks. Overall, I suggest that trying to write constant-time
table-based AES code is a bit futile anyway, and in the rare cases
where a proper AES implementation is still unavailable it's reasonable
to compromise with an implementation that simply prefetches the table.
Thus, this commit removes aes-fixed-time and CONFIG_CRYPTO_AES_TI. The
replacement is just the existing CONFIG_CRYPTO_AES, which for now maps
to the existing aes-generic code, but I'll soon be changing to use the
improved AES library code instead.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-9-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Rewrite memcpy_sglist from scratch
- Add on-stack AEAD request allocation
- Fix partial block processing in ahash
Algorithms:
- Remove ansi_cprng
- Remove tcrypt tests for poly1305
- Fix EINPROGRESS processing in authenc
- Fix double-free in zstd
Drivers:
- Use drbg ctr helper when reseeding xilinx-trng
- Add support for PCI device 0x115A to ccp
- Add support of paes in caam
- Add support for aes-xts in dthev2
Others:
- Use likely in rhashtable lookup
- Fix lockdep false-positive in padata by removing a helper"
* tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
crypto: zstd - fix double-free in per-CPU stream cleanup
crypto: ahash - Zero positive err value in ahash_update_finish
crypto: ahash - Fix crypto_ahash_import with partial block data
crypto: lib/mpi - use min() instead of min_t()
crypto: ccp - use min() instead of min_t()
hwrng: core - use min3() instead of nested min_t()
crypto: aesni - ctr_crypt() use min() instead of min_t()
crypto: drbg - Delete unused ctx from struct sdesc
crypto: testmgr - Add missing DES weak and semi-weak key tests
Revert "crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist"
crypto: scatterwalk - Fix memcpy_sglist() to always succeed
crypto: iaa - Request to add Kanchana P Sridhar to Maintainers.
crypto: tcrypt - Remove unused poly1305 support
crypto: ansi_cprng - Remove unused ansi_cprng algorithm
crypto: asymmetric_keys - fix uninitialized pointers with free attribute
KEYS: Avoid -Wflex-array-member-not-at-end warning
crypto: ccree - Correctly handle return of sg_nents_for_len
crypto: starfive - Correctly handle return of sg_nents_for_len
crypto: iaa - Fix incorrect return value in save_iaa_wq()
crypto: zstd - Remove unnecessary size_t cast
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k update from Geert Uytterhoeven:
- defconfig update
* tag 'm68k-for-v6.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: defconfig: Update defconfigs for v6.18-rc1
|
|
- Drop CONFIG_SCTP_COOKIE_HMAC_SHA1=y (removed in commit
2f3dd6ec901f29ae ("sctp: Convert cookie authentication to use
HMAC-SHA256")),
- Drop CONFIG_BATMAN_ADV_NC=y (removed in commit 87b95082db32ae1c
("batman-adv: remove network coding support")),
- Enable modular build of the SHA-1 secure hash algorithm (no longer
auto-enabled since commit 2f3dd6ec901f29ae ("sctp: Convert cookie
authentication to use HMAC-SHA256")).
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/65e00bcb7b2980278bb087986ee405627aa32d8b.1760360254.git.geert@linux-m68k.org
|
|
Remove ansi_cprng, since it's obsolete and unused, as confirmed at
https://lore.kernel.org/r/aQxpnckYMgAAOLpZ@gondor.apana.org.au/
This was originally added in 2008, apparently as a FIPS approved random
number generator. Whether this has ever belonged upstream is
questionable. Either way, ansi_cprng is no longer usable for this
purpose, since it's been superseded by the more modern algorithms in
crypto/drbg.c, and FIPS itself no longer allows it. (NIST SP 800-131A
Rev 1 (2015) says that RNGs based on ANSI X9.31 will be disallowed after
2015. NIST SP 800-131A Rev 2 (2019) confirms they are now disallowed.)
Therefore, there is no reason to keep it around.
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Haotian Zhang <vulab@iscas.ac.cn>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that the fec ethernet driver creates a fixed phy if needed,
we can remove this here.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/212e0cb5-a2f5-460f-8e03-3c3369d0acf1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the listns() system call to all architectures.
Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-20-2e6f823ebdc0@kernel.org
Tested-by: syzbot@syzkaller.appspotmail.com
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bug fixes from Ted Ts'o:
- Fix regression caused by removing CONFIG_EXT3_FS when testing some
very old defconfigs
- Avoid a BUG_ON when opening a file on a maliciously corrupted file
system
- Avoid mm warnings when freeing a very large orphan file metadata
- Avoid a theoretical races between metadata writeback and checkpoints
(it's very hard to hit in practice, since the race requires that the
writeback take a very long time)
* tag 'ext4_for_linus-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
Use CONFIG_EXT4_FS instead of CONFIG_EXT3_FS in all of the defconfigs
ext4: free orphan info with kvfree
ext4: detect invalid INLINE_DATA + EXTENTS flag combination
ext4, doc: fix and improve directory hash tree description
ext4: wait for ongoing I/O to complete before freeing blocks
jbd2: ensure that all ongoing I/O complete before freeing blocks
|
|
Commit d6ace46c82fd ("ext4: remove obsolete EXT3 config options")
removed the obsolete EXT3_CONFIG options, since it had been over a
decade since fs/ext3 had been removed. Unfortunately, there were a
number of defconfigs that still used CONFIG_EXT3_FS which the cleanup
commit didn't fix up. This led to a large number of defconfig test
builds to fail. Oops.
Fixes: d6ace46c82fd ("ext4: remove obsolete EXT3 config options")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that
take config space accessor functions.
Implement pci_find_capability(), pci_find_ext_capability(), and
dwc, dwc endpoint, and cadence capability search interfaces with
them (Hans Zhang)
- Leave parent unit address 0 in 'interrupt-map' so that when we
build devicetree nodes to describe PCI functions that contain
multiple peripherals, we can build this property even when
interrupt controllers lack 'reg' properties (Lorenzo Pieralisi)
- Add a Xeon 6 quirk to disable Extended Tags and limit Max Read
Request Size to 128B to avoid a performance issue (Ilpo Järvinen)
- Add sysfs 'serial_number' file to expose the Device Serial Number
(Matthew Wood)
- Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)
Resource management:
- Align m68k pcibios_enable_device() with other arches (Ilpo
Järvinen)
- Remove sparc pcibios_enable_device() implementations that don't do
anything beyond what pci_enable_resources() does (Ilpo Järvinen)
- Remove mips pcibios_enable_resources() and use
pci_enable_resources() instead (Ilpo Järvinen)
- Clean up bridge window sizing and assignment (Ilpo Järvinen),
including:
- Leave non-claimed bridge windows disabled
- Enable bridges even if a window wasn't assigned because not all
windows are required by downstream devices
- Preserve bridge window type when releasing the resource, since
the type is needed for reassignment
- Consolidate selection of bridge windows into two new
interfaces, pbus_select_window() and
pbus_select_window_for_type(), so this is done consistently
- Compute bridge window start and end earlier to avoid logging
stale information
MSI:
- Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol
Vives)
Error handling:
- Align AER with EEH by allowing drivers to request a Bus Reset on
Non-Fatal Errors (in addition to the reset on Fatal Errors that we
already do) (Lukas Wunner)
- If error recovery fails, emit FAILED_RECOVERY uevents for the
devices, not for the bridge leading to them.
This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner)
- Align AER with EEH by calling err_handler.error_detected()
callbacks to notify drivers if error recovery fails (Lukas Wunner)
- Align AER with EEH by restoring device error_state to
pci_channel_io_normal before the err_handler.slot_reset() callback.
This is earlier than before the err_handler.resume() callback
(Lukas Wunner)
- Emit a BEGIN_RECOVERY uevent when driver's
err_handler.error_detected() requests a reset, as well as when it
says recovery is complete or can be done without a reset (Niklas
Schnelle)
- Align s390 with AER and EEH by emitting uevents during error
recovery (Niklas Schnelle)
- Align EEH with AER and s390 by emitting BEGIN_RECOVERY,
SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the
result of err_handler.error_detected() (Niklas Schnelle)
- Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES
error information identifies a device without an AER Capability
(Breno Leitao)
- Update error decoding and TLP Log printing for new errors in
current PCIe base spec (Lukas Wunner)
- Update error recovery documentation to match the current code
and use consistent nomenclature (Lukas Wunner)
ASPM:
- Enable all ClockPM and ASPM states for devicetree platforms, since
there's typically no firmware that enables ASPM
This is a risky change that may uncover hardware or configuration
defects at boot-time rather than when users enable ASPM via sysfs
later. Booting with "pcie_aspm=off" prevents this enabling
(Manivannan Sadhasivam)
- Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)
Power management:
- If a device has already been disconnected, e.g., by a hotplug
removal, don't bother trying to resume it to D0 when detaching the
driver.
This avoids annoying "Unable to change power state from D3cold to
D0" messages (Mario Limonciello)
- Ensure devices are powered up before config reads for
'max_link_width', 'current_link_speed', 'current_link_width',
'secondary_bus_number', and 'subordinate_bus_number' sysfs files.
This prevents using invalid data (~0) in drivers or lspci and,
depending on how the PCIe controller reports errors, may avoid
error interrupts or crashes (Brian Norris)
Virtualization:
- Add rescan/remove locking when enabling/disabling SR-IOV, which
avoids list corruption on s390, where disabling SR-IOV also
generates hotplug events (Niklas Schnelle)
Peer-to-peer DMA:
- Free struct p2p_pgmap, not a member within it, in the
pci_p2pdma_add_resource() error path (Sungho Kim)
Endpoint framework:
- Document sysfs interface for BAR assignment of vNTB endpoint
functions (Jerome Brunet)
- Fix array underflow in endpoint BAR test case (Dan Carpenter)
- Skip endpoint IRQ test if the IRQ is out of range to avoid false
errors (Christian Bruel)
- Fix endpoint test case for controllers with fixed-size BARs smaller
than requested by the test (Marek Vasut)
- Restore inbound translation when disabling doorbell so the endpoint
doorbell test case can be run more than once (Niklas Cassel)
- Avoid a NULL pointer dereference when releasing DMA channels in
endpoint DMA test case (Shin'ichiro Kawasaki)
- Convert tegra194 interrupt number to MSI vector to fix endpoint
Kselftest MSI_TEST test case (Niklas Cassel)
- Reset tegra194 BARs when running in endpoint mode so the BAR tests
don't overwrite the ATU settings in BAR4 (Niklas Cassel)
- Handle errors in tegra194 BPMP transactions so we don't mistakenly
skip future PERST# assertion (Vidya Sagar)
AMD MDB PCIe controller driver:
- Update DT binding example to separate PERST# to a Root Port stanza
to make multiple Root Ports possible in the future (Sai Krishna
Musham)
- Add driver support for PERST# being described in a Root Port
stanza, falling back to the host bridge if not found there (Sai
Krishna Musham)
Freescale i.MX6 PCIe controller driver:
- Enable the 3.3V Vaux supply if available so devices can request
wakeup with either Beacon or WAKE# (Richard Zhu)
MediaTek PCIe Gen3 controller driver:
- Add optional sys clock ready time setting to avoid sys_clk_rdy
signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)
- Add DT binding and driver support for MT6991 and MT8196
(AngeloGioacchino Del Regno)
NVIDIA Tegra PCIe controller driver:
- When asserting PERST#, disable the controller instead of mistakenly
disabling the PLL twice (Nagarjuna Kristam)
- Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
Qualcomm PCIe controller driver:
- Select PCI Power Control Slot driver so slot voltage rails can be
turned on/off if described in Root Port devicetree node (Qiang Yu)
- Parse only PCI bridge child nodes in devicetree, skipping unrelated
nodes such as OPP (Operating Performance Points), which caused
probe failures (Krishna Chaitanya Chundru)
- Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)
- Consolidate Root Port 'phy' and 'reset' properties in struct
qcom_pcie_port, regardless of whether we got them from the Root
Port node or the host bridge node (Manivannan Sadhasivam)
- Fetch and map the ELBI register space in the DWC core rather than
in each driver individually (Krishna Chaitanya Chundru)
- Enable ECAM mechanism in DWC core by setting up iATU with 'CFG
Shift Feature' and use this in the qcom driver (Krishna Chaitanya
Chundru)
- Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
Chundru)
- Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
Glymur, which is compatible with X1E80100 but doesn't have the
cnoc_sf_axi clock (Qiang Yu)
Renesas R-Car PCIe controller driver:
- Fix a typo that prevented correct PHY initialization (Marek Vasut)
- Add a missing 1ms delay after PWR reset assertion as required by
the V4H manual (Marek Vasut)
- Assure reset has completed before DBI access to avoid SError (Marek
Vasut)
- Fix inverted PHY initialization check, which sometimes led to
timeouts and failure to start the controller (Marek Vasut)
- Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
regression when converting to msi_create_parent_irq_domain()
(Claudiu Beznea)
- Drop the spinlock protecting the PMSR register - it's no longer
required since pci_lock already serializes accesses (Marek Vasut)
- Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
SOPHGO PCIe controller driver:
- Check for existence of struct cdns_pcie.ops before using it to
allow Cadence drivers that don't need to supply ops (Chen Wang)
- Add DT binding and driver for the SOPHGO SG2042 PCIe controller
(Chen Wang)
STMicroelectronics STM32MP25 PCIe controller driver:
- Update pinctrl documentation of initial states and use in runtime
suspend/resume (Christian Bruel)
- Add pinctrl_pm_select_init_state() for use by stm32 driver, which
needs it during resume (Christian Bruel)
- Add devicetree bindings and drivers for the STMicroelectronics
STM32MP25 in host and endpoint modes (Christian Bruel)
Synopsys DesignWare PCIe controller driver:
- Add support for x16 in devicetree 'num-lanes' property (Konrad
Dybcio)
- Verify that if DT specifies a single IRQ for all eDMA channels, it
is named 'dma' (Niklas Cassel)
TI J721E PCIe driver:
- Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
Vadapalli)
- Power controller off before configuring the glue layer so the
controller latches the correct values on power-on (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver
exits with error (Siddharth Vadapalli)
- Add Peripheral Virtualization Unit (PVU), which restricts DMA from
PCIe devices to specific regions of host memory, to the ti,am65
binding (Jan Kiszka)
Xilinx NWL PCIe controller driver:
- Clear bootloader E_ECAM_CONTROL before merging in the new driver
value to avoid writing invalid values (Jani Nurminen)"
* tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits)
PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
PCI: stm32: Add PCIe host support for STM32MP25
PCI: xilinx-nwl: Fix ECAM programming
PCI: j721e: Fix incorrect error message in probe()
PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
PCI: dwc: Support 16-lane operation
PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
PCI: rcar-gen4: Fix inverted break condition in PHY initialization
PCI: rcar-gen4: Assure reset occurs before DBI access
PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
PCI: Set up bridge resources earlier
PCI: rcar-host: Drop PMSR spinlock
...
|
|
Pull misc non-vfs updates from Al Viro:
"Assorted dead code removal around asm/pgtable.h"
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
alpha: unobfuscate _PAGE_P() definition
kill FIRST_USER_PGD_NR
alpha: get rid of the remnants of BAD_PAGE and friends
SET_PAGE_DIR() users had been gone since 2.3.12pre1
PAGE_PTR() had been last used outside of arch/* in 1.1.94
csky: remove BS check for FAULT_FLAG_ALLOW_RETRY
|
