| Age | Commit message (Collapse) | Author | Lines |
|---|
|
efi_free_boot_services() frees memory occupied by EFI_BOOT_SERVICES_CODE
and EFI_BOOT_SERVICES_DATA using memblock_free_late().
There are two issue with that: memblock_free_late() should be used for
memory allocated with memblock_alloc() while the memory reserved with
memblock_reserve() should be freed with free_reserved_area().
More acutely, with CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
efi_free_boot_services() is called before deferred initialization of the
memory map is complete.
Benjamin Herrenschmidt reports that this causes a leak of ~140MB of
RAM on EC2 t3a.nano instances which only have 512MB or RAM.
If the freed memory resides in the areas that memory map for them is
still uninitialized, they won't be actually freed because
memblock_free_late() calls memblock_free_pages() and the latter skips
uninitialized pages.
Using free_reserved_area() at this point is also problematic because
__free_page() accesses the buddy of the freed page and that again might
end up in uninitialized part of the memory map.
Delaying the entire efi_free_boot_services() could be problematic
because in addition to freeing boot services memory it updates
efi.memmap without any synchronization and that's undesirable late in
boot when there is concurrency.
More robust approach is to only defer freeing of the EFI boot services
memory.
Split efi_free_boot_services() in two. First efi_unmap_boot_services()
collects ranges that should be freed into an array then
efi_free_boot_services() later frees them after deferred init is complete.
Link: https://lore.kernel.org/all/ec2aaef14783869b3be6e3c253b2dcbf67dbc12a.camel@kernel.crashing.org
Fixes: 916f676f8dc0 ("x86, efi: Retain boot service code until after switching to virtual mode")
Cc: <stable@vger.kernel.org>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull dmi update from Jean Delvare:
- include product_family info in dmi-id modalias
* tag 'dmi-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
firmware/dmi: Include product_family info to modalias
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"Mixed bag of EFI tweaks and bug fixes:
- Add a missing symbol export spotted by Arnd's randconfig testing
- Fix kexec from a kernel booted with 'noefi'
- Fix memblock handling of the unaccepted memory table
- Constify an occurrence of struct efivar_operations
- Add Ilias as EFI reviewer"
* tag 'efi-fixes-for-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Align unaccepted memory range to page boundary
efi: Fix reservation of unaccepted memory table
MAINTAINERS: Add a reviewer entry for EFI
efi: stmm: Constify struct efivar_operations
x86/kexec: Copy ACPI root pointer address from config table
efi: export sysfb_primary_display for EDID
|
|
The accept_memory() and range_contains_unaccepted_memory() functions
employ a "guard page" logic to prevent crashes with load_unaligned_zeropad().
This logic extends the range to be accepted (or checked) by one unit_size
if the end of the range is aligned to a unit_size boundary.
However, if the caller passes a range that is not page-aligned, the
'end' of the range might not be numerically aligned to unit_size, even
if it covers the last page of a unit. This causes the "if (!(end % unit_size))"
check to fail, skipping the necessary extension and leaving the next
unit unaccepted, which can lead to a kernel panic when accessed by
load_unaligned_zeropad().
Align the start address down and the size up to the nearest page
boundary before performing the unit_size alignment check. This ensures
that the guard unit is correctly added when the range effectively ends
on a unit boundary.
Signed-off-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The reserve_unaccepted() function incorrectly calculates the size of the
memblock reservation for the unaccepted memory table. It aligns the
size of the table, but fails to account for cases where the table's
starting physical address (efi.unaccepted) is not page-aligned.
If the table starts at an offset within a page and its end crosses into
a subsequent page that the aligned size does not cover, the end of the
table will not be reserved. This can lead to the table being overwritten
or inaccessible, causing a kernel panic in accept_memory().
This issue was observed when starting Intel TDX VMs with specific memory
sizes (e.g., > 64GB).
Fix this by calculating the end address first (including the unaligned
start) and then aligning it up, ensuring the entire range is covered
by the reservation.
Fixes: 8dbe33956d96 ("efi/unaccepted: Make sure unaccepted table is mapped")
Reported-by: Moritz Sanft <ms@edgeless.systems>
Signed-off-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The 'struct efivar_operations' is not modified by the driver after
initialization, so it should follow typical practice of being static
const for increased code safety and readability.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystem changes for 7.0-rc1. Lots of little things in here,
including:
- Loads of iio driver changes and updates and additions
- gpib driver updates
- interconnect driver updates
- i3c driver updates
- hwtracing (coresight and intel) driver updates
- deletion of the obsolete mwave driver
- binder driver updates (rust and c versions)
- mhi driver updates (causing a merge conflict, see below)
- mei driver updates
- fsi driver updates
- eeprom driver updates
- lots of other small char and misc driver updates and cleanups
All of these have been in linux-next for a while, with no reported
issues"
* tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (297 commits)
mux: mmio: fix regmap leak on probe failure
rust_binder: return p from rust_binder_transaction_target_node()
drivers: android: binder: Update ARef imports from sync::aref
rust_binder: fix needless borrow in context.rs
iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin
iio: sca3000: Fix a resource leak in sca3000_probe()
iio: proximity: rfd77402: Add interrupt handling support
iio: proximity: rfd77402: Document device private data structure
iio: proximity: rfd77402: Use devm-managed mutex initialization
iio: proximity: rfd77402: Use kernel helper for result polling
iio: proximity: rfd77402: Align polling timeout with datasheet
iio: cros_ec: Allow enabling/disabling calibration mode
iio: frequency: ad9523: correct kernel-doc bad line warning
iio: buffer: buffer_impl.h: fix kernel-doc warnings
iio: gyro: itg3200: Fix unchecked return value in read_raw
MAINTAINERS: add entry for ADE9000 driver
iio: accel: sca3000: remove unused last_timestamp field
iio: accel: adxl372: remove unused int2_bitmask field
iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll()
iio: magnetometer: Remove IRQF_ONESHOT
...
|
|
The sysfb_primary_display structure is now part of efi-init.c but
conditionally defined. One of the users is missing in the condition:
aarch64-linux-ld: drivers/video/fbdev/core/fbmon.o: in function `fb_firmware_edid':
fbmon.c:(.text.fb_firmware_edid+0x3c): undefined reference to `sysfb_primary_display'
Export it whenever CONFIG_FIRMWARE_EDID is set, so the fbdev core
code can use it.
Fixes: 4fcae6358871 ("sysfb: Move edid_info into sysfb_primary_display")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602111543.Do4nkY5l-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been relatively calm for a new era; majority of changes are for
ASoC, mostly device-specific changes, while there are a bit of
cleanups in core stuff. A few SPI API and regmap updates are included
to be used by sound drivers, too.
Core:
- A few trivial cleanups about __free() and runtime PM macros
- Convert to new snd_seq_bus binding
ASoC:
- Generic SDCA support for reporting jack events
- Continuing platform support, cleanup and feature improvements for
AMD, Intel, Qualcomm and SOF code
- Platform description improvements for the Cirrus drivers
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B
HD- and USB-audio:
- Many quirks as usual"
* tag 'sound-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits)
ALSA: usb-audio: Add DSD support for iBasso DC04U
ALSA: mixer: oss: Add card disconnect checkpoints
ASoC: SOF: ipc4-control: Set correct error code in refresh_bytes_control
ASoC: SOF: Intel: select CONFIG_SND_HDA_EXT_CORE from SND_SOC_SOF_HDA_COMMON
ALSA: usb-audio: Add iface reset and delay quirk for AB13X USB Audio
ASoC: amd: maintainer information
ALSA: ctxfi: Add quirk for SE-300PCIE variant (160b:0102)
ALSA: hda/generic: fix typos in comments
ALSA: hda/realtek - Enable mute LEDs on HP ENVY x360 15-es0xxx
ALSA: hda/conexant: Add quirk for HP ZBook Studio G4
ASoC: fsl_asrc_dma: allocate memory from dma device
ASoC: fsl_asrc: Add support for i.MX952 platform
ASoC: fsl_asrc_m2m: Add option to start ASRC before DMA device for M2M
ASoC: dt-bindings: fsl,imx-asrc: Add support for i.MX952 platform
ALSA: oss: delete self assignment
ASoC: rockchip: spdif: Convert to FIELD_PREP
ASoC: rockchip: spdif: Fill IEC958 CS info per params
ASoC: rockchip: spdif: Add support for format S32_LE
ASoC: rockchip: spdif: Add support for set mclk rate
ASoC: rockchip: spdif: Swap PCM and DAI component registration order
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are a handful of new SoCs this time, all of these are more or
less related to chips in a wider family:
- SpacemiT Key Stone K3 is an 8-core risc-v chip, and the first
widely available RVA23 implementation. Note that this is entirely
unrelated with the similarly named Texas Instruments K3 chip family
that follwed the TI Keystone2 SoC.
- The Realtek Kent family of SoCs contains three chip models
rtd1501s, rtd1861b and rtd1920s, and is related to their earlier
Set-top-box and NAS products such as rtd1619, but is built on newer
Arm Cortex-A78 cores.
- The Qualcomm Milos family includes the Snapdragon 7s Gen 3 (SM7635)
mobile phone SoC built around Armv9 Kryo cores of the Arm
Cortex-A720 generation. This one is used in the Fairphone Gen 6
- Qualcomm Kaanapali is a new SoC based around eight high performance
Oryon CPU cores
- NXP i.MX8QP and i.MX952 are both feature reduced versions of chips
we already support, i.e. the i.MX8QM and i.MX952, with fewer CPU
cores and I/O interfaces.
As part of a cleanup, a number of SoC specific devicetree files got
removed because they did not have a single board using the .dtsi files
and they were never compile tested as a result: Samsung s3c6400, ST
spear320s, ST stm32mp21xc/stm32mp23xc/stm32mp25xc, Renesas
r8a779m0/r8a779m2/r8a779m4/r8a779m6/r8a779m7/r8a779m8/r8a779mb/
r9a07g044c1/r9a07g044l1/r9a07g054l1/r9a09g047e37, and TI
am3703/am3715. All of these could be restored easily if a new board
gets merged.
Broadcom/Cavium/Marvell ThunderX2 gets removed along with its only
machine, as all remaining users are assumed to be using ACPI based
firmware.
A relatively small number of 43 boards get added this time, and almost
all of them for arm64. Aside from the reference boards for the newly
added SoCs, this includes:
- Three server boards use 32-bit ASpeed BMCs
- One more reference board for 32-bit Microchip LAN9668
- 64-bit Arm single-board computers based on Amlogic s905y4, CIX
sky1, NXP ls1028a/imx8mn/imx8mp/imx91/imx93/imx95, Qualcomm
qcs6490/qrb2210 and Rockchip rk3568/rk3588s
- Carrier board for SOMs using Intel agilex5, Marvell Armada 7020,
NXP iMX8QP, Mediatek mt8370/mt8390 and rockchip rk3588
- Two mobile phones using Snapdragon 845
- A gaming device and a NAS box, both based on Rockchips rk356x
On top of the newly added boards and SoCs, there is a lot of
background activity going into cleanups, in particular towards getting
a warning-free dtc build, and the usual work on adding support for
more hardware on the previously added machines"
* tag 'soc-dt-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (757 commits)
dt-bindings: intel: Add Agilex eMMC support
arm64: dts: socfpga: agilex: add emmc support
arm64: dts: intel: agilex5: Add simple-bus node on top of dma controller node
ARM: dts: socfpga: fix dtbs_check warning for fpga-region
ARM: dts: socfpga: add #address-cells and #size-cells for sram node
dt-bindings: altera: document syscon as fallback for sys-mgr
arm64: dts: altera: Use lowercase hex
dt-bindings: arm: altera: combine Intel's SoCFPGA into altera.yaml
arm64: dts: socfpga: agilex5: Add IOMMUS property for ethernet nodes
arm64: dts: socfpga: agilex5: add support for modular board
dt-bindings: intel: Add Agilex5 SoCFPGA modular board
arm64: dts: socfpga: agilex5: Add dma-coherent property
arm64: dts: realtek: Add Kent SoC and EVB device trees
dt-bindings: arm: realtek: Add Kent Soc family compatibles
ARM: dts: samsung: Drop s3c6400.dtsi
ARM: dts: nuvoton: Minor whitespace cleanup
MAINTAINERS: Add Falcon DB
arm64: dts: a7k: add COM Express boards
ARM: dts: microchip: Drop usb_a9g20-dab-mmx.dtsi
arm64: dts: rockchip: Fix rk3588 PCIe range mappings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are are a number of to firmware drivers, in particular the TEE
subsystem:
- a bus callback for TEE firmware that device drivers can register to
- sysfs support for tee firmware information
- minor updates to platform specific TEE drivers for AMD, NXP,
Qualcomm and the generic optee driver
- ARM SCMI firmware refactoring to improve the protocol discover
among other fixes and cleanups
- ARM FF-A firmware interoperability improvements
The reset controller and memory controller subsystems gain support for
additional hardware platforms from Mediatek, Renesas, NXP, Canaan and
SpacemiT.
Most of the other changes are for random drivers/soc code. Among a
number of cleanups and newly added hardware support, including:
- Mediatek MT8196 DVFS power management and mailbox support
- Qualcomm SCM firmware and MDT loader refactoring, as part of the
new Glymur platform support.
- NXP i.MX9 System Manager firmware support for accessing the syslog
- Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD
SoCs"
* tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (171 commits)
bus: fsl-mc: fix an error handling in fsl_mc_device_add()
reset: spacemit: Add SpacemiT K3 reset driver
reset: spacemit: Extract common K1 reset code
reset: Create subdirectory for SpacemiT drivers
dt-bindings: soc: spacemit: Add K3 reset support and IDs
reset: canaan: k230: drop OF dependency and enable by default
reset: rzg2l-usbphy-ctrl: Add suspend/resume support
reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits()
reset: gpio: check the return value of gpiod_set_value_cansleep()
reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV
reset: imx8mp-audiomix: Extend the driver usage
reset: imx8mp-audiomix: Switch to using regmap API
reset: imx8mp-audiomix: Drop unneeded macros
soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove
soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses
soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID
soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support
soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create()
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Fix race condition in hwrng core by using RCU
Algorithms:
- Allow authenc(sha224,rfc3686) in fips mode
- Add test vectors for authenc(hmac(sha384),cbc(aes))
- Add test vectors for authenc(hmac(sha224),cbc(aes))
- Add test vectors for authenc(hmac(md5),cbc(des3_ede))
- Add lz4 support in hisi_zip
- Only allow clear key use during self-test in s390/{phmac,paes}
Drivers:
- Set rng quality to 900 in airoha
- Add gcm(aes) support for AMD/Xilinx Versal device
- Allow tfms to share device in hisilicon/trng"
* tag 'v7.0-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (100 commits)
crypto: img-hash - Use unregister_ahashes in img_{un}register_algs
crypto: testmgr - Add test vectors for authenc(hmac(md5),cbc(des3_ede))
crypto: cesa - Simplify return statement in mv_cesa_dequeue_req_locked
crypto: testmgr - Add test vectors for authenc(hmac(sha224),cbc(aes))
crypto: testmgr - Add test vectors for authenc(hmac(sha384),cbc(aes))
hwrng: core - use RCU and work_struct to fix race condition
crypto: starfive - Fix memory leak in starfive_aes_aead_do_one_req()
crypto: xilinx - Fix inconsistant indentation
crypto: rng - Use unregister_rngs in register_rngs
crypto: atmel - Use unregister_{aeads,ahashes,skciphers}
hwrng: optee - simplify OP-TEE context match
crypto: ccp - Add sysfs attribute for boot integrity
dt-bindings: crypto: atmel,at91sam9g46-sha: add microchip,lan9691-sha
dt-bindings: crypto: atmel,at91sam9g46-aes: add microchip,lan9691-aes
dt-bindings: crypto: qcom,inline-crypto-engine: document the Milos ICE
crypto: caam - fix netdev memory leak in dpaa2_caam_probe
crypto: hisilicon/qm - increase wait time for mailbox
crypto: hisilicon/qm - obtain the mailbox configuration at one time
crypto: hisilicon/qm - remove unnecessary code in qm_mb_write()
crypto: hisilicon/qm - move the barrier before writing to the mailbox register
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Quirk the broken EFI framebuffer geometry on the Valve Steam Deck
- Capture the EDID information of the primary display also on non-x86
EFI systems when booting via the EFI stub.
* tag 'efi-next-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Support EDID information
sysfb: Move edid_info into sysfb_primary_display
sysfb: Pass sysfb_primary_display to devices
sysfb: Replace screen_info with sysfb_primary_display
sysfb: Add struct sysfb_display_info
efi: sysfb_efi: Reduce number of references to global screen_info
efi: earlycon: Reduce number of references to global screen_info
efi: sysfb_efi: Fix efidrmfb and simpledrmfb on Valve Steam Deck
efi: sysfb_efi: Convert swap width and height quirk to a callback
efi: sysfb_efi: Fix lfb_linelength calculation when applying quirks
efi: sysfb_efi: Replace open coded swap with the macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"This one is significantly larger than previous ACPI support pull
requests because several significant updates have coincided in it.
First, there is a routine ACPICA code update, to upstream version
20251212, but this time it covers new ACPI 6.6 material that has not
been covered yet. Among other things, it includes definitions of a few
new ACPI tables and updates of some others, like the GICv5 MADT
structures and ARM IORT IWB node definitions that are used for adding
GICv5 ACPI probing on ARM (that technically is IRQ subsystem material,
but it depends on the ACPICA changes, so it is included here). The
latter alone adds a few hundred lines of new code.
Second, there is an update of ACPI _OSC handling including a fix that
prevents failures from occurring in some corner cases due to careless
handling of _OSC error bits.
On top of that, the "system resource" ACPI device objects with the
PNP0C01 and PNP0C02 are now going to be handled by the ACPI core
device enumeration code instead of handing them over to the legacy PNP
system driver which causes device enumeration issues to occur. Some of
those issues have been worked around in device drivers and elsewhere
and those workarounds should not be necessary any more, so they are
going away.
Moreover, the time has come to convert all "core ACPI" device drivers
that were still using struct acpi_driver objects for device binding
into proper platform drivers that use struct platform_driver for this
purpose. These updates are accompanied by some requisite core ACPI
device enumeration code changes.
Next, there are ACPI APEI updates, including changes to avoid excess
overhead in the NMI handler and in SEA on the ARM side, changes to
unify ACPI-based HW error tracing and logging, and changes to prevent
APEI code from reaching out of its allocated memory.
There are also some ACPI power management updates, mostly related to
the ACPI cpuidle support in the processor driver, suspend-to-idle
handling on systems with ACPI support and to ACPI PM of devices.
In addition to the above, bugs are fixed and the code is cleaned up in
assorted places all over.
Specifics:
- Update the ACPICA code in the kernel to upstream version 20251212
which includes the following changes:
* Add support for new ACPI table DTPR (Michal Camacho Romero)
* Release objects with acpi_ut_delete_object_desc() (Zilin Guan)
* Add UUIDs for Microsoft fan extensions and UUIDs associated with
TPM 2.0 devices (Armin Wolf)
* Fix NULL pointer dereference in acpi_ev_address_space_dispatch()
(Alexey Simakov)
* Add KEYP ACPI table definition (Dave Jiang)
* Add support for the Microsoft display mux _OSI string (Armin
Wolf)
* Add definitions for the IOVT ACPI table (Xianglai Li)
* Abort AML bytecode execution on AML_FATAL_OP (Armin Wolf)
* Include all fields in subtable type1 for PPTT (Ben Horgan)
* Add GICv5 MADT structures and Arm IORT IWB node definitions
(Jose Marinho)
* Update Parameter Block structure for RAS2 and add a new flag in
Memory Affinity Structure for SRAT (Pawel Chmielewski)
* Add _VDM (Voltage Domain) object (Pawel Chmielewski)
- Add support for GICv5 ACPI probing on ARM which is based on the
GICv5 MADT structures and ARM IORT IWB node definitions recently
added to ACPICA (Lorenzo Pieralisi)
- Rework ACPI PM notification setup for PCI root buses and modify the
ACPI PM setup for devices to register wakeup source objects under
physical (that is, PCI, platform, etc.) devices instead of doing
that under their ACPI companions (Rafael Wysocki)
- Adjust debug messages regarding postponed ACPI PM printed during
system resume to be more accurate (Rafael Wysocki)
- Remove dead code from lps0_device_attach() (Gergo Koteles)
- Start to invoke Microsoft Function 9 (Turn On Display) of the Low-
Power S0 Idle (LPS0) _DSM in the suspend-to-idle resume flow on
systems with ACPI LPS0 support to address a functional issue on
Lenovo Yoga Slim 7i Aura (15ILL9), where system fans and keyboard
backlights fail to resume after suspend (Jakob Riemenschneider)
- Add sysfs attribute cid for exposing _CID lists under ACPI device
objects (Rafael Wysocki)
- Replace sprintf() with sysfs_emit() in all of the core ACPI sysfs
interface code (Sumeet Pawnikar)
- Use acpi_get_local_u64_address() in the code implementing ACPI
support for PCI to evaluate _ADR instead of evaluating that object
directly (Andy Shevchenko)
- Add JWIPC JVC9100 to irq1_level_low_skip_override[] to unbreak
serial IRQs on that system (Ai Chao)
- Fix handling of _OSC errors in acpi_run_osc() to avoid failures on
systems where _OSC error bits are set even though the _OSC return
buffer contains acknowledged feature bits (Rafael Wysocki)
- Clean up and rearrange \_SB._OSC handling for general platform
features and USB4 features to avoid code duplication and
unnecessary memory management overhead (Rafael Wysocki)
- Make the ACPI core device enumeration code handle PNP0C01 and
PNP0C02 ("system resource") device objects directly instead of
letting the legacy PNP system driver handle them to avoid device
enumeration issues on systems where PNP0C02 is present in the _CID
list under ACPI device objects with a _HID matching a proper device
driver in Linux (Rafael Wysocki)
- Drop workarounds for the known device enumeration issues related to
_CID lists containing PNP0C02 (Rafael Wysocki)
- Drop outdated comment regarding removed function in the ACPI-based
device enumeration code (Julia Lawall)
- Make PRP0001 device matching work as expected for ACPI device
objects using it as a _HID for board development and similar
purposes (Kartik Rajput)
- Use async schedule function in acpi_scan_clear_dep_fn() to avoid
races with user space initialization on some systems (Yicong Yang)
- Add a piece of documentation explaining why binding drivers
directly to ACPI device objects is not a good idea in general and
why it is desirable to convert drivers doing so into proper
platform drivers that use struct platform_driver for device binding
(Rafael Wysocki)
- Convert multiple "core ACPI" drivers, including the NFIT ACPI
device driver, the generic ACPI button drivers, the generic ACPI
thermal zone driver, the ACPI hardware event device (HED) driver,
the ACPI EC driver, the ACPI SMBUS HC driver, the ACPI Smart
Battery Subsystem (SBS) driver, and the ACPI backlight (video)
driver to proper platform drivers that use struct platform_driver
for device binding (Rafael Wysocki)
- Use acpi_get_local_u64_address() in the ACPI backlight (video)
driver to evaluate _ADR instead of evaluating that object directly
(Andy Shevchenko)
- Convert the generic ACPI battery driver to a proper platform driver
using struct platform_driver for device binding (Rafael Wysocki)
- Fix incorrect charging status when current is zero in the generic
ACPI battery driver (Ata İlhan Köktürk)
- Use LIST_HEAD() for initializing a stack-allocated list in the
generic ACPI watchdog device driver (Can Peng)
- Rework the ACPI idle driver initialization to register it directly
from the common initialization code instead of doing that from a
CPU hotplug "online" callback and clean it up (Huisong Li, Rafael
Wysocki)
- Fix a possible NULL pointer dereference in
acpi_processor_errata_piix4() (Tuo Li)
- Make read-only array non_mmio_desc[] static const (Colin Ian King)
- Prevent the APEI GHES support code on ARM from accessing memory out
of bounds or going past the ARM processor CPER record buffer (Mauro
Carvalho Chehab)
- Prevent cper_print_fw_err() from dumping the entire memory on
systems with defective firmware (Mauro Carvalho Chehab)
- Improve ghes_notify_nmi() status check to avoid unnecessary
overhead in the NMI handler by carrying out all of the requisite
preparations and the NMI registration time (Tony Luck)
- Refactor the GHES driver by extracting common functionality into
reusable helper functions to reduce code duplication and improve
the ghes_notify_sea() status check in analogy with the previous
ghes_notify_nmi() status check improvement (Shuai Xue)
- Make ELOG and GHES log and trace consistently and support the CPER
CXL protocol analogously (Fabio De Francesco)
- Disable KASAN instrumentation in the APEI GHES driver when compile
testing with clang < 18 (Nathan Chancellor)
- Let ghes_edac be the preferred driver to load on __ZX__ and _BYO_
systems by extending the platform detection list in the APEI GHES
driver (Tony W Wang-oc)
- Clean up cppc_perf_caps and cppc_perf_ctrls structs and rename EPP
constants for clarity in the ACPI CPPC library (Sumit Gupta)"
* tag 'acpi-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (117 commits)
ACPI: battery: fix incorrect charging status when current is zero
ACPI: scan: Use async schedule function in acpi_scan_clear_dep_fn()
ACPI: x86: s2idle: Invoke Microsoft _DSM Function 9 (Turn On Display)
ACPI: APEI: GHES: Add ghes_edac support for __ZX__ and _BYO_ systems
ACPI: APEI: GHES: Disable KASAN instrumentation when compile testing with clang < 18
ACPI: sysfs: Replace sprintf() with sysfs_emit()
ACPI: CPPC: Rename EPP constants for clarity
ACPI: CPPC: Clean up cppc_perf_caps and cppc_perf_ctrls structs
ACPI: processor: idle: Rework the handling of acpi_processor_ffh_lpi_probe()
ACPI: processor: idle: Convert acpi_processor_setup_cpuidle_dev() to void
ACPI: processor: idle: Convert acpi_processor_setup_cpuidle_states() to void
irqchip/gic-v5: Add ACPI IWB probing
irqchip/gic-v5: Add ACPI ITS probing
irqchip/gic-v5: Add ACPI IRS probing
irqchip/gic-v5: Split IRS probing into OF and generic portions
PCI/MSI: Make the pci_msi_map_rid_ctlr_node() interface firmware agnostic
irqdomain: Add parent field to struct irqchip_fwid
ACPI: PCI: simplify code with acpi_get_local_u64_address()
ACPI: video: simplify code with acpi_get_local_u64_address()
ACPI: PM: Adjust messages regarding postponed ACPI PM
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v7.0
This release is almost all abut driers, there's very little core work
here, although some of that driver work is in more generic areas like
SDCA and SOF:
- Generic SDCA support for reporting jack events.
- Continuing platform support, cleanup and feature improements for the
AMD, Intel, Qualcomm and SOF code.
- Platform description improvements for the Cirrus drivers.
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B.
We also pulled in one small SPI API update and some more substantial
regmap work (cache description improvements) for use in drivers.
|
|
Some platforms rely on modalias to customize configuration,
the product family helps to identify the hardware.
Add product_family to modalias for better utilization.
This patch mimics commit e26f023e01ef ("firmware/dmi:
Include product_sku info to modalias") that did the same
for product_sku, and commit f97a2103f1a7 ("firmware: dmi:
Move product_sku info to the end of the modalias") that
fixed regressions caused by the added field not being in
the end of the list.
Signed-off-by: Antoine Lassagne <antoine.lassagne@canonical.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. It became a bit larger than wished, but
all of them are device-specific small fixes, and it should be still
fairly safe to take at the last minute.
Included are a few quirks and fixes for Intel, AMD, HD-audio, and
USB-audio, as well as a race fix in aloop driver and corrections of
Cirrus firmware kunit test"
* tag 'sound-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Enable headset mic for Acer Nitro 5
ASoC: fsl_xcvr: fix missing lock in fsl_xcvr_mode_put()
ASoC: dt-bindings: ti,tlv320aic3x: Add compatible string ti,tlv320aic23
ASoC: amd: fix memory leak in acp3x pdm dma ops
ALSA: usb-audio: fix broken logic in snd_audigy2nx_led_update()
ALSA: aloop: Fix racy access at PCM trigger
ASoC: rt1320: fix intermittent no-sound issue
ASoC: SOF: Intel: use hdev->info.link_mask directly
firmware: cs_dsp: rate-limit log messages in KUnit builds
ASoC: amd: yc: Add quirk for HP 200 G2a 16
ASoC: cs42l43: Correct handling of 3-pole jack load detection
ASoC: Intel: sof_es8336: Add DMI quirk for Huawei BOD-WXX9
ASoC: sof_sdw: Add a quirk for Lenovo laptop using sidecar amps with cs42l43
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into char-misc-next
Dinh writes:
SoCFPGA firmware update for v6.20
- Delete stray tabs in stratix10-svc
* tag 'socfpga_firmware_update_for_v6.20' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
firmware: stratix10-svc: Delete some stray tabs
|
|
Merge ACPI APEI support updates for 6.20-rc1/7.0-rc1:
- Make read-only array non_mmio_desc[] static const (Colin Ian King)
- Prevent the APEI GHES support code on ARM from accessing memory out
of bounds or going past the ARM processor CPER record buffer (Mauro
Carvalho Chehab)
- Prevent cper_print_fw_err() from dumping the entire memory on systems
with defective firmware (Mauro Carvalho Chehab)
- Improve ghes_notify_nmi() status check to avoid unnecessary overhead
in the NMI handler by carrying out all of the requisite preparations
and the NMI registration time (Tony Luck)
- Refactor the GHES driver by extracting common functionality into
reusable helper functions to reduce code duplication and improve
the ghes_notify_sea() status check in analogy with the previous
ghes_notify_nmi() status check improvement (Shuai Xue)
- Make ELOG and GHES log and trace consistently and support the CPER
CXL protocol analogously (Fabio De Francesco)
- Disable KASAN instrumentation in the APEI GHES driver when compile
testing with clang < 18 (Nathan Chancellor)
- Let ghes_edac be the preferred driver to load on __ZX__ and _BYO_
systems by extending the platform detection list in the APEI GHES
driver (Tony W Wang-oc)
* acpi-apei:
ACPI: APEI: GHES: Add ghes_edac support for __ZX__ and _BYO_ systems
ACPI: APEI: GHES: Disable KASAN instrumentation when compile testing with clang < 18
ACPI: extlog: Trace CPER CXL Protocol Error Section
ACPI: APEI: GHES: Add helper to copy CPER CXL protocol error info to work struct
ACPI: APEI: GHES: Add helper for CPER CXL protocol errors checks
ACPI: extlog: Trace CPER PCI Express Error Section
ACPI: extlog: Trace CPER Non-standard Section Body
ACPI: APEI: GHES: Improve ghes_notify_sea() status check
ACPI: APEI: GHES: Extract helper functions for error status handling
ACPI: APEI: GHES: Improve ghes_notify_nmi() status check
EFI/CPER: don't dump the entire memory region
APEI/GHES: ensure that won't go past CPER allocated record
EFI/CPER: don't go past the ARM processor CPER record buffer
APEI/GHES: ARM processor Error: don't go past allocated memory
ACPI: APEI: EINJ: make read-only array non_mmio_desc static const
|
|
Use the dev_*_ratelimit() macros if the cs_dsp KUnit tests are enabled
in the build, and allow the KUnit tests to disable message output.
Some of the KUnit tests cause a very large number of log messages from
cs_dsp, because the tests perform many different test cases. This could
cause some lines to be dropped from the kernel log. Dropped lines can
prevent the KUnit wrappers from parsing the ktap output in the dmesg log.
The KUnit builds of cs_dsp export three bools that the KUnit tests can
use to entirely disable log output of err, warn and info messages. Some
tests have been updated to use this, replacing the previous fudge of a
usleep() in the exit handler of each test. We don't necessarily want to
disable all log messages if they aren't expected to be excessive,
so the rate-limiting allows leaving some logging enabled.
The rate-limited macros are not used in normal builds because it is not
appropriate to rate-limit every message. That could cause important
messages to be dropped, and there wouldn't be such a high rate of
messages in normal operation.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/linux-sound/af393f08-facb-4c44-a054-1f61254803ec@opensource.cirrus.com/T/#t
Fixes: cd8c058499b6 ("firmware: cs_dsp: Add KUnit testing of bin error cases")
Link: https://patch.msgid.link/20260130171256.863152-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from "Peng Fan (OSS)" <peng.fan@oss.nxp.com>:
The main goal is to convert drivers to use GPIO descriptors. While reading
the code, I think it is time to remove ak4641 and pxa2xx-ac97 driver,
more info could be found in commit log of each patch.
Then only need to convert sound/arm/pxa2xx-ac97-lib.c to use GPIO
descriptors. Not have hardware to test the pxa2xx ac97.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree for v6.20
Introduce the Kaanapali SoC, with the MTP and QRD devices. Introduce
support for the Milos SoC (SM7635) and initial support for the Fairphone
(Gen 6) device on this platform.
Add the QCS6490-based RubikPI3 board, the QRB2210-based Arduino UnoQ,
the X Elite-based Medion SPRCHRGD 14 S1 and Surface Pro 11 laptops, and
the SDM845-based Pixel 3 and Pixel 3 XL devices.
On the Kodiak-based (QCS6490) RB3Gen2 the TC9563 PCIe switch controller
is described.
On Lemans (SA8775P/QCS9075) the GPU and crypto blocks are added.
IO-regions and clocks are added to interconnect nodes to allow QoS
configuration. GPU, TPM and USB support are enabled on the evaluation
kit (EVK).
On Monaco (QCS8300) the two PCIe controllers, the camera subsystem,
tsens, display subsystem, crypto, CPUfreq, and coresight are added. On
the evaluation kit (EVK) the PCIe busses are enabled, together with an
AMC6821-based fan controller and the ST33 TPM chip.
On MSM8939 the camera subsystem is described. The Asus ZenFone 2
Laser/Selfie gains battery and hall sensor support.
On the Agatti-based RB1 board PM8008 is described and an overlay for the
Vision mezzanine is introduced.
On SDM630 the compute DSP remoteproc, FastRPC and related entites are
described. The LPASS LPI pinctrl node is described.
On SDM845-based OnePlus device the bootloader framebuffer and its
resources are described, to improve the transition. On the SDM845-based
devices from OnePlus, SHIFT, and Xiaomi ath10k calibration variants are
specified. The sensor remoteproc is enabled on Xiaomi Pocophone F1.
On SM7225-based Fairphone FP4 regulators for the cameras are described,
and the camera EEPROM is added.
On SM8650 the camera subsystem is described. On the QRD the Samsung
S5KJN1 camera sensor is added, and for the HDK an overlay for the "Rear
Camera Card" is added.
On SM8750 CPUfreq, SDCHCI and Iris (video encode/decode) support are
added, and missing - required - properties for the BAM DMA is added.
These are then enabled on the MTP.
On Talos (SM6150/QCS615) PMU, DisplayPort, and USB/DP combo PHY are added.
DisplayPort is enabled on the Talos Ride board.
On Hamoa (X Elite) add crypto engine, missing TCSR reference clocks, and
random number generator block. The soc bus address width is corrected to
match the hardware. On the Lenovo Thinkpad T14s HDMI and audio playback
over DisplayPort is introduced. HDMI, Iris (video encode/decode) and
PS8830 retimers are described for the ASUS Vivobook S 15. On the Hamoa
evaluation kit (EVK) PCIe busses, WiFi, backlight, TPM and RG
(red/green) LEDs are described.
Enable QSEECOM, and thereby UEFI variable access, on the Medion SPRCHRGD
14 S1 (commit should have been on drivers branch).
* tag 'qcom-arm64-for-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (155 commits)
dt-bindings: mailbox: qcom: Add IPCC support for Kaanapali and Glymur Platforms
dt-bindings: mailbox: qcom: Add CPUCP mailbox controller bindings for Kaanapali
arm64: dts: qcom: lemans: enable static TPDM
arm64: dts: qcom: kodiak: Add memory region for audiopd
arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: add HDMI nodes
arm64: dts: qcom: x1e: bus is 40-bits (fix 64GB models)
arm64: dts: qcom: lemans; Add EL2 overlay
arm64: dts: qcom: sm8150: add uart13
arm64: dts: qcom: sdm845-db845c: specify power for WiFi CH1
arm64: dts: qcom: sdm845-db845c: drop CS from SPIO0
arm64: dts: qcom: qrb4210-rb2: Fix UART3 wakeup IRQ storm
arm64: dts: qcom: sm6125-ginkgo: Fix missing msm-id subtype
arm64: dts: qcom: qcs8300: Add GPU cooling
arm64: dts: qcom: sa8775p: Add reg and clocks for QoS configuration
arm64: dts: qcom: hamoa-iot-evk: Enable TPM (ST33) on SPI11
arm64: dts: qcom: talos: Add PMU support
arm64: dts: qcom: talos: switch to interrupt-cells 4 to add PPI partitions
arm64: dts: qcom: ipq9574: Complete USB DWC3 wrapper interrupts
arm64: dts: qcom: ipq5018: Correct USB DWC3 wrapper interrupts
arm64: dts: qcom: monaco: Add CTCU and ETR nodes
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add aes-gcm crypto API's for AMD/Xilinx Versal device.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add API to get SoC version and family info.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
For better maintainability move crypto related API's to
new zynqmp-crypto.c file.
Signed-off-by: Harsh Jain <h.jain@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.20
Support multiple wait queues in the SCM firmware interface and provide
discovery of the wait queue interrupt to deal with the cases where
bootloader didn't patch the DeviceTree with the IRQ information.
Refactor the MDT loader and the SCM driver's peripheral authentication
service interface and introduce support for passing a remoteproc
resource table to the firmware. The remoteproc patches that uses this
and uses this to configure the IOMMU are included here due to
bidirectional dependencies. The end result is remoteproc support on the
Glymur platform.
Enable QSEECOM and thereby UEFI variable access, on the Surface Pro 11.
Make the QMI interface endianness aware, to support ath1Xk on big endian
machines.
Add the Glymur support in LLCC driver.
* tag 'qcom-drivers-for-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
soc: qcom: preserve CPU endianness for QMI_DATA_LEN
soc: qcom: fix QMI encoding/decoding for basic elements
soc: qcom: check QMI basic element error codes
soc: qcom: ubwc: add missing include
remoteproc: qcom: pas: Enable Secure PAS support with IOMMU managed by Linux
remoteproc: pas: Extend parse_fw callback to fetch resources via SMC call
firmware: qcom_scm: Add qcom_scm_pas_get_rsc_table() to get resource table
firmware: qcom_scm: Add SHM bridge handling for PAS when running without QHEE
firmware: qcom_scm: Refactor qcom_scm_pas_init_image()
firmware: qcom_scm: Add a prep version of auth_and_reset function
soc: qcom: mdtloader: Remove qcom_mdt_pas_init() from exported symbols
soc: qcom: mdtloader: Add PAS context aware qcom_mdt_pas_load() function
remoteproc: pas: Replace metadata context with PAS context structure
firmware: qcom_scm: Introduce PAS context allocator helper function
firmware: qcom_scm: Rename peripheral as pas_id
firmware: qcom_scm: Remove redundant piece of code
dt-bindings: remoteproc: qcom,pas: Add iommus property
soc: qcom: cmd-db: Use devm_memremap() to fix memory leak in cmd_db_dev_probe
soc: qcom: pmic_glink_altmode: Consume TBT3/USB4 mode notifications
dt-bindings: qcom,pdc: document the Milos Power Domain Controller
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v6.20
Bug Fixes:
- pruss: Fix double free in pruss_clk_mux_setup()
- k3-socinfo: Fix regmap leak on probe failure
- k3-socinfo: Fix compile testing dependency issue
Cleanups:
- knav_dma/knav_qmss: Remove redundant ENOMEM printks and simplify error messages
- knav_dma/knav: Simplify code with scoped for each OF child loops
- ti_sci.h: Fix all kernel-doc warnings
* tag 'ti-driver-soc-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
soc: ti: pruss: Fix double free in pruss_clk_mux_setup()
soc: ti: k3-socinfo: Fix regmap leak on probe failure
soc: ti: k3-socinfo: Fix compile testing
soc: ti: knav_dma: Simplify with scoped for each OF child loop
soc: ti: knav: Simplify with scoped for each OF child loop
soc: ti: knav_dma: Simplify error messages in probe
soc: ti: knav_dma: Remove ENOMEM printks
soc: ti: knav_qmss: Remove ENOMEM printks
firmware: ti_sci.h: fix all kernel-doc warnings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/drivers
i.MX drivers changes for 6.20:
- A few changes from Peng Fan adding dump syslog support for i.MX
System Manager firmware driver, cleaning up soc-imx9 driver, fixing
error handling for soc-imx8m driver
* tag 'imx-drivers-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx8m: Fix error handling for clk_prepare_enable()
soc: imx: Spport i.MX9[4,52]
soc: imx: Use dev_err_probe() for i.MX9
soc: imx: Use device-managed APIs for i.MX9
firmware: imx: sm-misc: Dump syslog info
firmware: arm_scmi: imx: Support getting syslog of MISC protocol
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers
TEE bus callback for 6.20
- Move from generic device_driver to TEE bus-specific callbacks
- Add module_tee_client_driver() and registration helpers to reduce
boilerplate
- Convert several client drivers (TPM, KEYS, firmware, EFI, hwrng,
and RTC)
- Update documentation and fix kernel-doc warnings
* tag 'tee-bus-callback-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tpm/tpm_ftpm_tee: Fix kdoc after function renames
tpm/tpm_ftpm_tee: Make use of tee bus methods
tpm/tpm_ftpm_tee: Make use of tee specific driver registration
KEYS: trusted: Make use of tee bus methods
KEYS: trusted: Migrate to use tee specific driver registration function
firmware: tee_bnxt: Make use of tee bus methods
firmware: tee_bnxt: Make use of module_tee_client_driver()
firmware: arm_scmi: Make use of tee bus methods
firmware: arm_scmi: optee: Make use of module_tee_client_driver()
efi: stmm: Make use of tee bus methods
efi: stmm: Make use of module_tee_client_driver()
hwrng: optee - Make use of tee bus methods
hwrng: optee - Make use of module_tee_client_driver()
rtc: optee: Make use of tee bus methods
rtc: optee: Migrate to use tee specific driver registration function
tee: Adapt documentation to cover recent additions
tee: Add probe, remove and shutdown bus callbacks to tee_client_driver
tee: Add some helpers to reduce boilerplate for tee client drivers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v7.0
A set of cleanups, refactoring, and fixes to the Arm SCMI stack:
1. Rework protocol version negotiation by moving version discovery and
downgrade handling into the SCMI core and performing negotiation early,
before protocol initialization. Remove legacy per-protocol versioning
logic now made redundant by centralized SCMI handling.
2. Increase the internal MAX_OPPS limit in the SCMI performance protocol
to 64, allowing platforms with larger OPP tables to be fully supported.
3. Reduce duplicated boilerplate in pinctrl and related protocols by
consolidating validation and lookup logic in protocol get info helpers.
4. Refactor reset protocol domain handling by introducing a shared lookup
helper, ensuring consistent validation and error reporting.
5. Fix potential undefined behaviour by properly initializing pointers
annotated with the __free attribute.
* tag 'scmi-updates-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Remove legacy protocol versioning logic
firmware: arm_scmi: Rework protocol version negotiation logic
firmware: arm_scmi: Increase performance MAX_OPPS limit to 64
firmware: arm_scmi: Move boiler plate code into the get info functions
firmware: arm_scmi: Refactor reset domain handling
firmware: arm_scmi: Fix uninitialized pointers with __free attr
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm FF-A updates for v7.0
A small set of updates to the Arm FF-A driver:
1. Fix a correctness issue in NOTIFICATION_INFO_GET handling of 32-bit
firmware responses, avoiding reads from undefined register bits.
2. Improve clarity and robustness of FF-A feature checks by tying them
to explicit version requirements.
3. Ensure Rx/Tx buffers are unmapped on FF-A initialization failure to
prevent resource leaks.
* tag 'ffa-updates-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Correct 32-bit response handling in NOTIFICATION_INFO_GET
firmware: arm_ffa: Tie FF-A version checks to specific features
firmware: arm_ffa: Unmap Rx/Tx buffers on init failure
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of
hex.h interfaces to directly #include <linux/hex.h> as part of the process
of putting kernel.h on a diet.
Removing hex.h from kernel.h means that 36K C source files don't have to
pay the price of parsing hex.h for the roughly 120 C source files that
need it.
This change has been build-tested with allmodconfig on most ARCHes. Also,
all users/callers of <linux/hex.h> in the entire source tree have been
updated if needed (if not already #included).
Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Merge series from Claudiu <claudiu.beznea@tuxon.dev>:
This series adds cleanups for the Renesas RZ SSI driver.
|
|
The cpu_bitmap flexible array now contains more than just the cpu_bitmap.
In preparation for changing the static mm_struct definitions to cover for
the additional space required, change the cpu_bitmap type from "unsigned
long" to "char", require an unsigned long alignment of the flexible array,
and rename the field from "cpu_bitmap" to "flexible_array".
Introduce the MM_STRUCT_FLEXIBLE_ARRAY_INIT macro to statically initialize
the flexible array. This covers the init_mm and efi_mm static
definitions.
This is a preparation step for fixing the missing mm_cid size for static
mm_struct definitions.
Link: https://lkml.kernel.org/r/20251224173358.647691-3-mathieu.desnoyers@efficios.com
Fixes: af7f588d8f73 ("sched: Introduce per-memory-map concurrency ID")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Thomas Gleixner <tglx@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Christan König <christian.koenig@amd.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Liam R . Howlett" <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Martin Liu <liumartin@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add debugfs interface to read System Manager syslog info
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
MISC protocol supports getting system log regarding system sleep latency,
wakeup interrupt and etc. Add the API for user to retrieve the information
from SM.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The current logic at cper_print_fw_err() doesn't check if the
error record length is big enough to handle offset. On a bad firmware,
if the ofset is above the actual record, length -= offset will
underflow, making it dump the entire memory.
The end result can be:
- the logic taking a lot of time dumping large regions of memory;
- data disclosure due to the memory dumps;
- an OOPS, if it tries to dump an unmapped memory region.
Fix it by checking if the section length is too small before doing
a hex dump.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
[ rjw: Subject tweaks ]
Link: https://patch.msgid.link/1752b5ba63a3e2f148ddee813b36c996cc617e86.1767871950.git.mchehab+huawei@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There's a logic inside GHES/CPER to detect if the section_length
is too small, but it doesn't detect if it is too big.
Currently, if the firmware receives an ARM processor CPER record
stating that a section length is big, kernel will blindly trust
section_length, producing a very long dump. For instance, a 67
bytes record with ERR_INFO_NUM set 46198 and section length
set to 854918320 would dump a lot of data going a way past the
firmware memory-mapped area.
Fix it by adding a logic to prevent it to go past the buffer
if ERR_INFO_NUM is too big, making it report instead:
[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
[Hardware Error]: event severity: recoverable
[Hardware Error]: Error 0, type: recoverable
[Hardware Error]: section_type: ARM processor error
[Hardware Error]: MIDR: 0xff304b2f8476870a
[Hardware Error]: section length: 854918320, CPER size: 67
[Hardware Error]: section length is too big
[Hardware Error]: firmware-generated error record is incorrect
[Hardware Error]: ERR_INFO_NUM is 46198
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
[ rjw: Subject and changelog tweaks ]
Link: https://patch.msgid.link/41cd9f6b3ace3cdff7a5e864890849e4b1c58b63.1767871950.git.mchehab+huawei@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The return value calculation was incorrect: `return len - buf_size;`
Initially `len = buf_size`, then `len` decreases with each operation.
This results in a negative return value on success.
Fix by returning `buf_size - len` which correctly calculates the actual
number of bytes written.
Fixes: a976d790f494 ("efi/cper: Add a new helper function to print bitmasks")
Signed-off-by: Morduan Zang <zhangdandan@uniontech.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
drivers-for-6.20
Merge the support for loading and managing the TrustZone-based remote
processors found in the Glymur platform through a topic branch, as it's
a mix of qcom-soc and remoteproc patches.
|
|
Qualcomm remote processor may rely on Static and Dynamic resources for
it to be functional. Static resources are fixed like for example,
memory-mapped addresses required by the subsystem and dynamic
resources, such as shared memory in DDR etc., are determined at
runtime during the boot process.
For most of the Qualcomm SoCs, when run with Gunyah or older QHEE
hypervisor, all the resources whether it is static or dynamic, is
managed by the hypervisor. Dynamic resources if it is present for a
remote processor will always be coming from secure world via SMC call
while static resources may be present in remote processor firmware
binary or it may be coming qcom_scm_pas_get_rsc_table() SMC call along
with dynamic resources.
Some of the remote processor drivers, such as video, GPU, IPA, etc., do
not check whether resources are present in their remote processor
firmware binary. In such cases, the caller of this function should set
input_rt and input_rt_size as NULL and zero respectively. Remoteproc
framework has method to check whether firmware binary contain resources
or not and they should be pass resource table pointer to input_rt and
resource table size to input_rt_size and this will be forwarded to
TrustZone for authentication. TrustZone will then append the dynamic
resources and return the complete resource table in the passed output
buffer.
More about documentation on resource table format can be found in
include/linux/remoteproc.h
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-11-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
On SoCs running with a non-Gunyah-based hypervisor, Linux must take
responsibility for creating the SHM bridge both for metadata (before
calling qcom_scm_pas_init_image()) and for remoteproc memory (before
calling qcom_scm_pas_auth_and_reset()). We have taken care the things
required for qcom_scm_pas_auth_and_reset(). Lets put these awareness
of above conditions into qcom_scm_pas_init_image() and
qcom_scm_pas_metadata_release().
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-10-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Refactor qcom_scm_pas_init_image() by moving the memory allocation,
copy, and free operations to a higher-level function, and isolate the
actual SMC call in a separate function. The main intention is to allow
flexibility for different allocators and to respect any constraints that
the allocator API may impose before invoking the actual SCM function.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-9-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
For memory passed to TrustZone (TZ), it must either be part of a pool
registered with TZ or explicitly registered via SHMbridge SMC calls.
When Gunyah hypervisor is present, PAS SMC calls from Linux running at
EL1 are trapped by Gunyah running @ EL2, which handles SHMbridge
creation for both metadata and remoteproc carveout memory before
invoking the calls to TZ.
On SoCs running with a non-Gunyah-based hypervisor, Linux must take
responsibility for creating the SHM bridge before invoking PAS SMC
calls. For the auth_and_reset() call, the remoteproc carveout memory
must first be registered with TZ via a SHMbridge SMC call and once
authentication and reset are complete, the SHMbridge memory can be
deregistered.
Introduce qcom_scm_pas_prepare_and_auth_reset(), which sets up the SHM
bridge over the remoteproc carveout memory when Linux operates at EL2.
This behavior is indicated by a new field added to the PAS context data
structure. The function then invokes the auth_and_reset SMC call.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-8-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
As a superset of the existing metadata context, the PAS context
structure enables both remoteproc and non-remoteproc subsystems to
better support scenarios where the SoC runs with or without the Gunyah
hypervisor. To reflect this, relevant SCM and metadata functions are
updated to incorporate PAS context awareness and remove metadata context
data structure completely.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-5-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
When the Peripheral Authentication Service (PAS) method runs on a SoC
where Linux operates at EL2 (i.e., without the Gunyah hypervisor), the
reset sequences are handled by TrustZone. In such cases, Linux must
perform additional steps before invoking PAS SMC calls, such as creating
a SHM bridge. Therefore, PAS SMC calls require awareness and handling of
these additional steps when Linux runs at EL2.
To support this, there is a need for a data structure that can be
initialized prior to invoking any SMC or MDT functions. This structure
allows those functions to determine whether they are operating in the
presence or absence of the Gunyah hypervisor and behave accordingly.
Currently, remoteproc and non-remoteproc subsystems use different
variants of the MDT loader helper API, primarily due to differences in
metadata context handling. Remoteproc subsystems retain the metadata
context until authentication and reset are completed, while
non-remoteproc subsystems (e.g., video, graphics, IPA, etc.) do not
retain the metadata context and can free it within the
qcom_scm_pas_init() call by passing a NULL context parameter and due to
these differences, it is not possible to extend metadata context
handling to support remoteproc and non remoteproc subsystem use PAS
operations, when Linux operates at EL2.
Add PAS context data structure allocator helper function.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-4-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
