aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display/dc/dml/dcn301 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2025-08-18drm/amd/display: replace min/max nesting with clamp()Xichao Zhao1-2/+2
The clamp() macro explicitly expresses the intent of constraining a value within bounds.Therefore, replacing min(max(a, b), c) with clamp(val, lo, hi) can improve code readability. Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-04drm/amd/display: update dpp/disp clock from smu clock tablePaul Hsieh1-3/+17
[Why] The reason some high-resolution monitors fail to display properly is that this platform does not support sufficiently high DPP and DISP clock frequencies [How] Update DISP and DPP clocks from the smu clock table then DML can filter these mode if not support. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Adjust functions prefix for some of the dcn301 fpu functionsRodrigo Siqueira2-6/+5
Add dcn301_fpu prefix to some of the FPU function with the required adjustments. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Clean FPGA code in dcQingqing Zhuo1-36/+34
[Why] Drop dead code for Linux. [How] Remove all IS_FPGA_MAXIMUS_DC and IS_DIAG_DC Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: add debug option for dramclk_change_latency in apuCharlene Liu1-0/+5
[Why & How] Support dramclk change latency change via debug option and add some code isolation. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: include soc._clock_tmp[] into DC's scratch regionHamza Mahfooz1-19/+21
Currently, we are using soc._clock_tmp[] to temporarily store and modify data from soc.clock_limits[] before copying it back into soc.clock_limits[] (because modifying data directly in soc.clock_limits[] causes unintended behavior). However, this approach has a number of downsides, such as: 1. struct _vcs_dpi_soc_bounding_box_st's creation/destruction aren't well defined (which could mean more unintended behavior). 2. Throwing "temp" varibles in structs everywhere doesn't make for a particularly readable codebase. For these reasons, we should get rid of soc._clock_tmp[] by defining a struct scratch within struct dc that, contains within it all of the temporary variables (including _clock_tmp[]) such that it is obvious how they are intended to be used. Co-authored-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: include missing headersMagali Lemes1-0/+1
Add missing headers to solve the following warnings from sparse: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:656:17: warning: symbol 'ddr4_wm_table_gs' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:693:17: warning: symbol 'lpddr4_wm_table_gs' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:730:17: warning: symbol 'lpddr4_wm_table_with_disabled_ppt' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:767:17: warning: symbol 'ddr4_wm_table_rn' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:804:17: warning: symbol 'ddr4_1R_wm_table_rn' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/dcn20_fpu.c:841:17: warning: symbol 'lpddr4_wm_table_rn' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn301/dcn301_fpu.c:217:17: warning: symbol 'ddr4_wm_table' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn301/dcn301_fpu.c:254:17: warning: symbol 'lpddr5_wm_table' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/dcn31_fpu.c:53:30: warning: symbol 'dcn3_1_ip' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/dcn31_fpu.c:197:30: warning: symbol 'dcn3_15_ip' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/dcn31_fpu.c:293:30: warning: symbol 'dcn3_16_ip' was not declared. Should it be static? Fixes: 1a3408259bfd ("drm/amd/display: move FPU code on dcn21 clk_mgr") Fixes: 5085e0361f5a ("drm/amd/display: move FPU code from dcn301 clk mgr to DML folder") Fixes: 26f4712aedbd ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder") Fixes: fa896297b31b ("drm/amd/display: move FPU related code from dcn315 to dml/dcn31 folder") Fixes: 3f8951cc123f ("drm/amd/display: move FPU related code from dcn316 to dml/dcn31 folder") Signed-off-by: Magali Lemes <magalilemes00@gmail.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Maíra Canal <mairacanal@riseup.net> Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: move FPU code from dcn301 clk mgr to DML folderMelissa Wen1-0/+74
The -mno-gnu-attribute option in dcn301 clk mgr makefile hides a soft vs hard fp error for powerpc. After removing this flag, we can see some FPU code remains there: gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn301/vg_clk_mgr.o uses soft float Therefore, remove the -mno-gnu-attribute flag for dcn301/powerpc and move FPU-associated code to DML folder. Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Maíra Canal <mairacanal@riseup.net> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-14drm/amd/display: Use pre-allocated temp struct for bounding box updateLeo Li1-15/+21
[Why] There is a theoretical problem in prior patches for reducing the stack size of *update_bw_bounding_box() functions. By modifying the soc.clock_limits[n] struct directly, this can cause unintended behavior as the for loop attempts to swap rows in clock_limits[n]. A temporary struct is still required to make sure we stay functinoally equivalent. [How] Add a temporary clock_limits table to the SOC struct, and use it when swapping rows. Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-08drm/amd/display: Reduce frame size in the bouding box for DCN301Rodrigo Siqueira1-17/+13
GCC throw warnings for the function dcn301_fpu_update_bw_bounding_box due to its frame size that looks like this: error: the frame size of 1936 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] For fixing this issue I dropped an intermadiate variable. Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: Wrap dcn301_calculate_wm_and_dlg for FPU.Bas Nieuwenhuizen2-2/+2
Mirrors the logic for dcn30. Cue lots of WARNs and some kernel panics without this fix. Cc: stable@vger.kernel.org Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: move FPU associated DCN301 code to DML folderQingqing Zhuo2-0/+432
[Why & How] As part of the FPU isolation work documented in https://patchwork.freedesktop.org/series/93042/, isolate code that uses FPU in DCN301 to DML, where all FPU code should locate. Cc: Christian König <christian.koenig@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Zhan Liu <Zhan.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2026-01-04 04:19:26 +0000