aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display/dc/resource (follow)
AgeCommit message (Collapse)AuthorFilesLines
2025-10-07drm/amd/display: Fix unsafe uses of kernel mode FPUArd Biesheuvel3-3/+46
The point of isolating code that uses kernel mode FPU in separate compilation units is to ensure that even implicit uses of, e.g., SIMD registers for spilling occur only in a context where this is permitted, i.e., from inside a kernel_fpu_begin/end block. This is important on arm64, which uses -mgeneral-regs-only to build all kernel code, with the exception of such compilation units where FP or SIMD registers are expected to be used. Given that the compiler may invent uses of FP/SIMD anywhere in such a unit, none of its code may be accessible from outside a kernel_fpu_begin/end block. This means that all callers into such compilation units must use the DC_FP start/end macros, which must not occur there themselves. For robustness, all functions with external linkage that reside there should call dc_assert_fp_enabled() to assert that the FPU context was set up correctly. Fix this for the DCN35, DCN351 and DCN36 implementations. Cc: Austin Zheng <austin.zheng@amd.com> Cc: Jun Lei <jun.lei@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <siqueira@igalia.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-07drm/amd/display: Disable scaling on DCE6 for nowTimur Kristóf1-2/+2
Scaling doesn't work on DCE6 at the moment, the current register programming produces incorrect output when using fractional scaling (between 100-200%) on resolutions higher than 1080p. Disable it until we figure out how to program it properly. Fixes: 7c15fd86aaec ("drm/amd/display: dc/dce: add initial DCE6 support (v10)") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-25drm/amd/display: Share dce100_validate_global with DCE6-8Timur Kristóf4-63/+7
The dce100_validate_global function was verbatim exactly the same as dce60_validate_global and dce80_validate_global. Share dce100_validate_global between DCE6-10 to save code size. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-25drm/amd/display: Share dce100_validate_bandwidth with DCE6-8Timur Kristóf4-77/+18
DCE6-8 have very similar capabilities to DCE10, they support the same DP and HDMI versions and work similarly. Share dce100_validate_bandwidth between DCE6-10 to reduce code duplication in the DC driver. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-25drm/amd/display: Reject modes with too high pixel clock on DCE6-10Timur Kristóf3-3/+27
Reject modes with a pixel clock higher than the maximum display clock. Use 400 MHz as a fallback value when the maximum display clock is not known. Pixel clocks that are higher than the display clock just won't work and are not supported. With the addition of the YUV422 fallback, DC can now accidentally select a mode requiring higher pixel clock than actually supported when the DP version supports the required bandwidth but the clock is otherwise too high for the display engine. DCE 6-10 don't support these modes but they don't have a bandwidth calculation to reject them properly. Fixes: db291ed1732e ("drm/amd/display: Add fallback path for YCBCR422") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: Init dispclk from bootup clock for DCN314Lo-an Chen1-0/+1
[Why] Driver does not pick up and save vbios's clocks during init clocks, the dispclk in clk_mgr will keep 0 until the first update clocks. In some cases, OS changes the timing in the second set mode (lower the pixel clock), causing the driver to lower the dispclk in prepare bandwidth, which is illegal and causes grey screen. [How] 1. Dump and save the vbios's clocks, and init the dispclk in dcn314_init_clocks. 2. Fix the condition in dcn314_update_clocks, regarding a 0kHz value. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Lo-an Chen <lo-an.chen@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-23drm/amd/display: Disable stutter when programming watermarks on dcn32Dillon Varone2-1/+3
[WHY&HOW] Reprogramming watermarks with stutter allowed can cause instability on some ASICs. Disable it prior to raising watermarks (prepare bandwidth), then re-enable after lowering (optimize bandwidth). Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Keep PLL0 running on DCE 6.0 and 6.4Timur Kristóf1-1/+10
DC can turn off the display clock when no displays are connected or when all displays are off, for reference see: - dce*_validate_bandwidth DC also assumes that the DP clock is always on and never powers it down, for reference see: - dce110_clock_source_power_down In case of DCE 6.0 and 6.4, PLL0 is the clock source for both the engine clock and DP clock, for reference see: - radeon_atom_pick_pll - atombios_crtc_set_disp_eng_pll Therefore, PLL0 should be always kept running on DCE 6.0 and 6.4. This commit achieves that by ensuring that by setting the display clock to the corresponding value in low power state instead of zero. This fixes a page flip timeout on SI with DC which happens when all connected displays are blanked. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15Revert "drm/amd/display: Reduce Stack Usage by moving 'audio_output' into ↵Martin Leung2-3/+5
'stream_res' v4" This reverts commit 1cf1205ef268 ("drm/amd/display: Reduce Stack Usage by moving 'audio_output' into 'stream_res' v4") Reason for revert: Causes DP compliance errors Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Add DSC padding for OVT SupportRelja Vojvodic2-1/+4
[Why] -Certain OVT timings require DSC configurations which divide the horizontal active unevenly across DSC slices -DSC slices must be even, so padding needs to be added to the active to make this possible -The pixel clock of the HW now needs to be increased to accommodate the extra padded pixels -To keep the line time the same, the blank of the HW timing needs to be increased as well [How] -Calculate h_active padding, h_total padding, and pixel clock based off of the original OVT timing and DSC calculations -Store these values in the pipe and program HW with these modifications -Added general support for cases where DSC slice config does not evenly split the horizontal active by fixing some slice width calculations -Updated PPS calculations for these cases Reviewed-by: Chris Park <chris.park@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Relja Vojvodic <rvojvodi@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-15drm/amd/display: Rename header file link.h to link_service.hWesley Chalmers11-11/+12
[WHY] Header file name "link.h" collides with system header when dc is compiled as a user-mode library [WHAT] Rename link.h to link_service.h to avoid name collision Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-09drm/amd/display: Remove duplicated codeRay Wu3-9/+0
[Why&How] Remove duplicated code Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-09-02Merge tag 'amd-drm-next-6.18-2025-08-29' of ↵Dave Airlie8-17/+18
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.18-2025-08-29: amdgpu: - Replay fixes - RAS updates - VCN SRAM load fixes - EDID read fixes - eDP ALPM support - AUX fixes - Documenation updates - Rework how PTE flags are generated - DCE6 fixes - VCN devcoredump cleanup - MMHUB client id fixes - SR-IOV fixes - VRR fixes - VCN 5.0.1 RAS support - Backlight fixes - UserQ fixes - Misc code cleanups - SMU 13.0.12 updates - Expanded PCIe DPC support - Expanded VCN reset support - SMU 13.0.x Updates - VPE per queue reset support - Cusor rotation fix - DSC fixes - GC 12 MES TLB invalidation update - Cursor fixes - Non-DC TMDS clock validation fix amdkfd: - debugfs fixes - Misc code cleanups - Page migration fixes - Partition fixes - SVM fixes radeon: - Misc code cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250829190848.1921648-1-alexander.deucher@amd.com
2025-08-27drm/amd/display: Array offset used before range checkClay King1-1/+1
Consolidating multiple CodeQL Fixes for alerts with rule id: cpp/offset-use-before-range-check Reviewed-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Clay King <clayking@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-27drm/amd/display: Multiplication result converted to larger typeClay King2-9/+9
Consolidating multiple CodeQL Fixes for alerts with rule id: cpp/integer-multiplication-cast-to-long Reviewed-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Clay King <clayking@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-08Merge tag 'drm-next-2025-08-08' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds1-14/+20
Pull drm fixes from Dave Airlie: "This is the fixes that built up in the merge window, mostly amdgpu and xe with one i915 display fix, seems like things are pretty good for rc1. i915: - DP LPFS fixes xe: - SRIOV: PF fixes and removal of need of module param - Fix driver unbind around Devcoredump - Mark xe driver as BROKEN if kernel page size is not 4kB amdgpu: - GC 9.5.0 fixes - SMU fix - DCE 6 DC fixes - mmhub client ID fixes - VRR fix - Backlight fix - UserQ fix - Legacy reset fix - Misc fixes amdkfd: - CRIU fix - Debugfs fix" * tag 'drm-next-2025-08-08' of https://gitlab.freedesktop.org/drm/kernel: (28 commits) drm/amdgpu: add missing vram lost check for LEGACY RESET drm/amdgpu/discovery: fix fw based ip discovery drm/amdkfd: Destroy KFD debugfs after destroy KFD wq amdgpu/amdgpu_discovery: increase timeout limit for IFWI init drm/amdgpu: Update SDMA firmware version check for user queue support drm/amdgpu: Add NULL check for asic_funcs drm/amd/display: Revert "drm/amd/display: Fix AMDGPU_MAX_BL_LEVEL value" drm/amd/display: fix a Null pointer dereference vulnerability drm/amd/display: Add primary plane to commits for correct VRR handling drm/amdgpu: update mmhub 3.3 client id mappings drm/amdgpu: update mmhub 3.0.1 client id mappings drm/amdgpu: Retain job->vm in amdgpu_job_prepare_job drm/amd/display: Fix DCE 6.0 and 6.4 PLL programming. drm/amd/display: Don't overwrite dce60_clk_mgr drm/amdkfd: Fix checkpoint-restore on multi-xcc drm/amd: Restore cached manual clock settings during resume drm/amd: Restore cached power limit during resume drm/amdgpu: Update external revid for GC v9.5.0 drm/amdgpu: Update supported modes for GC v9.5.0 Mark xe driver as BROKEN if kernel page size is not 4kB ...
2025-08-04drm/amd/display: Fix DCE 6.0 and 6.4 PLL programming.Timur Kristóf1-14/+20
Apparently, both DCE 6.0 and 6.4 have 3 PLLs, but PLL0 can only be used for DP. Make sure to initialize the correct amount of PLLs in DC for these DCE versions and use PLL0 only for DP. Also, on DCE 6.0 and 6.4, the PLL0 needs to be powered on at initialization as opposed to DCE 6.1 and 7.x which use a different clock source for DFS. The following functions were used as reference from the old radeon driver implementation of DCE 6.x: - radeon_atom_pick_pll - atombios_crtc_set_disp_eng_pll Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 35222b5934ec8d762473592ece98659baf6bc48e) Cc: stable@vger.kernel.org
2025-08-04drm/amd/display: Adding interface to log hw state when underflow happensMuhammad Ahmed2-2/+4
[why] Will help us better debug underflow issues. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Muhammad Ahmed <Muhammad.Ahmed@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-04drm/amd/display: Toggle for Disable Force Pstate Allow on DisableRyan Seto1-0/+1
[Why & How] In theory, driver should be able to support disabling force pstate allow after hardware release however this behavior is not tested yet. Introducing a new toggle to disable the force on the fly. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-04drm/amd/display: Fix DCE 6.0 and 6.4 PLL programming.Timur Kristóf1-14/+20
Apparently, both DCE 6.0 and 6.4 have 3 PLLs, but PLL0 can only be used for DP. Make sure to initialize the correct amount of PLLs in DC for these DCE versions and use PLL0 only for DP. Also, on DCE 6.0 and 6.4, the PLL0 needs to be powered on at initialization as opposed to DCE 6.1 and 7.x which use a different clock source for DFS. The following functions were used as reference from the old radeon driver implementation of DCE 6.x: - radeon_atom_pick_pll - atombios_crtc_set_disp_eng_pll Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-07-31Merge tag 'drm-next-2025-08-01' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds1-0/+1
Pull drm fixes from Dave Airlie: "Just a bunch of amdgpu and xe fixes. amdgpu: - DSC divide by 0 fix - clang fix - DC debugfs fix - Userq fixes - Avoid extra evict-restore with KFD - Backlight fix - Documentation fix - RAS fix - Add new kicker handling - DSC fix for DCN 3.1.4 - PSR fix - Atomic fix - DC reset fixes - DCN 3.0.1 fix - MMHUB client mapping fix xe: - Fix BMG probe on unsupported mailbox command - Fix OA static checker warning about null gt - Fix a NULL vs IS_ERR() bug in xe_i2c_register_adapter - Fix missing unwind goto in GuC/HuC - Don't register I2C devices if VF - Clear whole GuC g2h_fence during initialization - Avoid call kfree for drmm_kzalloc - Fix pci_dev reference leak on configfs - SRIOV: Disable CSC support on VF * tag 'drm-next-2025-08-01' of https://gitlab.freedesktop.org/drm/kernel: (24 commits) drm/xe/vf: Disable CSC support on VF drm/amdgpu: update mmhub 4.1.0 client id mappings drm/amd/display: Allow DCN301 to clear update flags drm/amd/display: Pass up errors for reset GPU that fails to init HW drm/amd/display: Only finalize atomic_obj if it was initialized drm/amd/display: Avoid configuring PSR granularity if PSR-SU not supported drm/amd/display: Disable dsc_power_gate for dcn314 by default drm/amdgpu: add kicker fws loading for gfx12/smu14/psp14 drm/amd/amdgpu: fix missing lock for cper.ring->rptr/wptr access drm/amd/display: Fix misuse of /** to /* in 'dce_i2c_hw.c' drm/amd/display: fix initial backlight brightness calculation drm/amdgpu: Avoid extra evict-restore process. drm/amdgpu: track whether a queue is a kernel queue in amdgpu_mqd_prop drm/amdgpu: check if hubbub is NULL in debugfs/amdgpu_dm_capabilities drm/amdgpu: Initialize data to NULL in imu_v12_0_program_rlc_ram() drm/amd/display: Fix divide by zero when calculating min ODM factor drm/xe/configfs: Fix pci_dev reference leak drm/xe/hw_engine_group: Avoid call kfree() for drmm_kzalloc() drm/xe/guc: Clear whole g2h_fence during initialization drm/xe/vf: Don't register I2C devices if VF ...
2025-07-30Merge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds31-132/+239
Pull drm updates from Dave Airlie: "Highlights: - Intel xe enable Panthor Lake, started adding WildCat Lake - amdgpu has a bunch of reset improvments along with the usual IP updates - msm got VM_BIND support which is important for vulkan sparse memory - more drm_panic users - gpusvm common code to handle a bunch of core SVM work outside drivers. Detail summary: Changes outside drm subdirectory: - 'shrink_shmem_memory()' for better shmem/hibernate interaction - Rust support infrastructure: - make ETIMEDOUT available - add size constants up to SZ_2G - add DMA coherent allocation bindings - mtd driver for Intel GPU non-volatile storage - i2c designware quirk for Intel xe core: - atomic helpers: tune enable/disable sequences - add task info to wedge API - refactor EDID quirks - connector: move HDR sink to drm_display_info - fourcc: half-float and 32-bit float formats - mode_config: pass format info to simplify dma-buf: - heaps: Give CMA heap a stable name ci: - add device tree validation and kunit displayport: - change AUX DPCD access probe address - add quirk for DPCD probe - add panel replay definitions - backlight control helpers fbdev: - make CONFIG_FIRMWARE_EDID available on all arches fence: - fix UAF issues format-helper: - improve tests gpusvm: - introduce devmem only flag for allocation - add timeslicing support to GPU SVM ttm: - improve eviction sched: - tracing improvements - kunit improvements - memory leak fixes - reset handling improvements color mgmt: - add hardware gamma LUT handling helpers bridge: - add destroy hook - switch to reference counted drm_bridge allocations - tc358767: convert to devm_drm_bridge_alloc - improve CEC handling panel: - switch to reference counter drm_panel allocations - fwnode panel lookup - Huiling hl055fhv028c support - Raspberry Pi 7" 720x1280 support - edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK - simple: AUO P238HAN01 - st7701: Winstar wf40eswaa6mnn0 - visionox: rm69299-shift - Renesas R61307, Renesas R69328 support - DJN HX83112B hdmi: - add CEC handling - YUV420 output support xe: - WildCat Lake support - Enable PanthorLake by default - mark BMG as SRIOV capable - update firmware recommendations - Expose media OA units - aux-bux support for non-volatile memory - MTD intel-dg driver for non-volatile memory - Expose fan control and voltage regulator in sysfs - restructure migration for multi-device - Restore GuC submit UAF fix - make GEM shrinker drm managed - SRIOV VF Post-migration recovery of GGTT nodes - W/A additions/reworks - Prefetch support for svm ranges - Don't allocate managed BO for each policy change - HWMON fixes for BMG - Create LRC BO without VM - PCI ID updates - make SLPC debugfs files optional - rework eviction rejection of bound external BOs - consolidate PAT programming logic for pre/post Xe2 - init changes for flicker-free boot - Enable GuC Dynamic Inhibit Context switch i915: - drm_panic support for i915/xe - initial flip queue off by default for LNL/PNL - Wildcat Lake Display support - Support for DSC fractional link bpp - Support for simultaneous Panel Replay and Adaptive sync - Support for PTL+ double buffer LUT - initial PIPEDMC event handling - drm_panel_follower support - DPLL interface renames - allocate struct intel_display dynamically - flip queue preperation - abstract DRAM detection better - avoid GuC scheduling stalls - remove DG1 force probe requirement - fix MEI interrupt handler on RT kernels - use backlight control helpers for eDP - more shared display code refactoring amdgpu: - add userq slot to INFO ioctl - SR-IOV hibernation support - Suspend improvements - Backlight improvements - Use scaling for non-native eDP modes - cleaner shader updates for GC 9.x - Remove fence slab - SDMA fw checks for userq support - RAS updates - DMCUB updates - DP tunneling fixes - Display idle D3 support - Per queue reset improvements - initial smartmux support amdkfd: - enable KFD on loongarch - mtype fix for ext coherent system memory radeon: - CS validation additional GL extensions - drop console lock during suspend/resume - bump driver version msm: - VM BIND support - CI: infrastructure updates - UBWC single source of truth - decouple GPU and KMS support - DP: rework I/O accessors - DPU: SM8750 support - DSI: SM8750 support - GPU: X1-45 support and speedbin support for X1-85 - MDSS: SM8750 support nova: - register! macro improvements - DMA object abstraction - VBIOS parser + fwsec lookup - sysmem flush page support - falcon: generic falcon boot code and HAL - FWSEC-FRTS: fb setup and load/execute ivpu: - Add Wildcat Lake support - Add turbo flag ast: - improve hardware generations implementation imx: - IMX8qxq Display Controller support lima: - Rockchip RK3528 GPU support nouveau: - fence handling cleanup panfrost: - MT8370 support - bo labeling - 64-bit register access qaic: - add RAS support rockchip: - convert inno_hdmi to a bridge rz-du: - add RZ/V2H(P) support - MIPI-DSI DCS support sitronix: - ST7567 support sun4i: - add H616 support tidss: - add TI AM62L support - AM65x OLDI bridge support bochs: - drm panic support vkms: - YUV and R* format support - use faux device vmwgfx: - fence improvements hyperv: - move out of simple - add drm_panic support" * tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits) drm/tidss: oldi: convert to devm_drm_bridge_alloc() API drm/tidss: encoder: convert to devm_drm_bridge_alloc() drm/amdgpu: move reset support type checks into the caller drm/amdgpu/sdma7: re-emit unprocessed state on ring reset drm/amdgpu/sdma6: re-emit unprocessed state on ring reset drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset drm/amdgpu/sdma5: re-emit unprocessed state on ring reset drm/amdgpu/gfx12: re-emit unprocessed state on ring reset drm/amdgpu/gfx11: re-emit unprocessed state on ring reset drm/amdgpu/gfx10: re-emit unprocessed state on ring reset drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset drm/amdgpu: Add WARN_ON to the resource clear function drm/amd/pm: Use cached metrics data on SMUv13.0.6 drm/amd/pm: Use cached data for min/max clocks gpu: nova-core: fix bounds check in PmuLookupTableEntry::new drm/amdgpu: Replace HQD terminology with slots naming drm/amdgpu: Add user queue instance count in HW IP info drm/amd/amdgpu: Add helper functions for isp buffers drm/amd/amdgpu: Initialize swnode for ISP MFD device ...
2025-07-28drm/amd/display: Reduce Stack Usage by moving 'audio_output' into ↵Srinivasan Shanmugam2-5/+3
'stream_res' v4 The function `dp_retrain_link_dp_test` currently allocates a large audio_output array on the stack, causing the stack frame size to exceed the compiler limit (1080 bytes > 1024 bytes). This change prevents stack overflow issues: amdgpu/../display/dc/link/accessories/link_dp_cts.c:65:13: warning: stack frame size (1080) exceeds limit (1024) in 'dp_retrain_link_dp_test' [-Wframe-larger-than] static void dp_retrain_link_dp_test(struct dc_link *link, v2: Move audio-related data like `audio_output` is kept "per pipe" to manage the audio for that specific display pipeline/display output path (stream). (Wenjing) v3: Update in all the places where `build_audio_output` is currently called with a separate audio_output variable on the stack & wherever `audio_output` is passed to other functions `dce110_apply_single_controller_ctx_to_hw()` & `dce110_setup_audio_dto()` (like `az_configure`, `wall_dto_setup`) replace with usage of `pipe_ctx->stream_res.audio_output` to centralize audio data per pipe. v4: Remove empty lines before `build_audio_output`. (Alex) Fixes: 9c6669c2e21a ("drm/amd/display: Fix Link Override Sequencing When Switching Between DIO/HPO") Cc: Wayne Lin <wayne.lin@amd.com> Cc: George Shen <george.shen@amd.com> Cc: Michael Strauss <michael.strauss@amd.com> Cc: Alvin Lee <Alvin.Lee2@amd.com> Cc: Ray Wu <ray.wu@amd.com> Cc: Wenjing Liu <wenjing.liu@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-07-28drm/amd/display: Disable dsc_power_gate for dcn314 by defaultRoman Li1-0/+1
[Why] "REG_WAIT timeout 1us * 1000 tries - dcn314_dsc_pg_control line" warnings seen after resuming from s2idle. DCN314 has issues with DSC power gating that cause REG_WAIT timeouts when attempting to power down DSC blocks. [How] Disable dsc_power_gate for dcn314 by default. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-07-15drm/amd/display: Refactor DSC cap calculationsDillon Varone17-0/+34
[WHY] DSC block level should only be responsible for reporting single DSC instance capabilities. Factoring in ODM combine requirements should be handled in dc_dsc.c. Both components should acquire clocks from clk_mgr to determine throughput capabilities instead of relying on hard coded values as these can differ by SoC and SKU. [HOW] 1) Add dsc_get_single_enc_caps to acquire single DSC instance capabilities (replacing dsc_get_enc_caps), factoring in DSCCLK 2) add build_dsc_enc_caps to combine single DSC instance capabilities 3) account for max pixel rate per pipe (DISPCLK) when calculating minimum slice count Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-30drm/amd/display: Fix Link Override Sequencing When Switching Between DIO/HPOMichael Strauss8-7/+59
[WHY] When performing certain link maintenance compliance tests or forcing link settings, changing between 128b/132b and 8b/10b rates no longer works on some ASICs. Some rate divider updates only occur when we set timings or validate state, which is not performed currently when toggling DPMS to change rates. [HOW] Re-calculate dividers and reprogram audio when switching between DIO and HPO through DP compliance/escape code path. Add OTG disable/re-enable so we don't touch the clock while OTG is active. Acquire dcLock before forcing link settings to avoid thread synchronization errors due to added programming in escape code path and potential HPD interrupts. Reviewed-by: George Shen <george.shen@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Mike Katsnelson <mike.katsnelson@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-18drm/amd/display: Add dc cap for dp tunnelingPeichen Huang5-0/+15
[WHAT] 1. add dc cap for dp tunneling 2. add function to get index of host router Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Cruise Hung <cruise.hung@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 29e178d13979cf6fdb42c5fe2dfec2da2306c4ad) Cc: stable@vger.kernel.org
2025-06-18drm/amd/display: remove use_native_pstate_optimizationYan Li6-6/+0
[Why] In DML2 (not DML2.1), DCN35 and DCN351 have the default value for use_native_pstate_optimization set to true. The code path where this bit is false is not used. [How] Remove the bit and the corresponding code path when it is set to false. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Yan Li <yan.li@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-18drm/amd/display: Clear DPP 3DLUT CapRyan Seto6-6/+12
[WHY & HOW] Clear DPP 3DLUT Cap flag on ASICs that do not use it Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-18drm/amd/display: Refactor DML2 DC power instanceDillon Varone3-24/+18
[WHY & HOW] Use a dedicated DC power option and instance pair. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-18drm/amd/display: Remove dml/dcn401 files and referencesDillon Varone1-3/+0
[WHY & HOW] DCN401 is only supported using DML2.1, so remove unused code and files. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-18drm/amd/display: Add dc cap for dp tunnelingPeichen Huang5-0/+15
[WHAT] 1. add dc cap for dp tunneling 2. add function to get index of host router Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Cruise Hung <cruise.hung@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-03drm/amd/display: replace fast_validate with enum dc_validate_modeYan Li26-86/+86
[Why] The boolean fast_validate is used as an input parameter in multiple functions. To support more scenarios, we are replacing it with enum dc_validate_mode. [How] The enum dc_validate_mode introduces three possible values: 1) DC_VALIDATE_MODE_AND_PROGRAMMING: Apply the mode to hardware 2) DC_VALIDATE_MODE_ONLY: Check whether the mode can be supported 3) DC_VALIDATE_MODE_AND_STATE_INDEX: Check if the mode can be supported, and determine the optimal voltage level needed to support it. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Yan Li <yan.li@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-06-03drm/amd/display: Add support for 2nd sharpening rangeSamson Tam1-0/+21
[Why & How] Add support for 2nd sharpening range for cases where we want override existing DCN sharpening range Reviewed-by: Ilya Bakoulin <ilya.bakoulin@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-22drm/amd/display: no 3D and blnd LUT as DPP color caps for DCN401Melissa Wen1-2/+2
Match what is declared as DPP color caps with hw caps. DCN401 has MPC shaper + 3D LUTs that are movable before and after blending (get from plane or stream), but no DPP blend LUTs. Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: Assign preferred stream encoder instance to dpiaMeenakshikumar Somasundaram1-0/+4
[Why] For dpia, preferred engine instance availability is not checked when assigning stream encoder instance. [How] Check for dpia preferred engine id and assign the same stream encoder instance for the stream if available. Reviewed-by: PeiChen Huang <peichen.huang@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: Refactor SubVP cursor limiting logicDillon Varone24-55/+152
[WHY] There are several gaps that can result in SubVP being enabled with incompatible HW cursor sizes, and unjust restrictions to cursor size due to wrong predictions on future usage of SubVP. [HOW] - remove "prediction" logic in favor of tagging based on previous SubVP usage - block SubVP if current HW cursor settings are incompatible - provide interface for DM to determine if HW cursor should be disabled due to an attempt to enable SubVP Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: Remove unnecessary DC_FP_START/DC_FP_ENDAlex Hung1-6/+0
[WHY & HOW] Remove the unnecessary DC_FP_START/DC_FP_END pair to reduce time in preempt_disable. It also fixes "BUG: sleeping function called from invalid context" error messages because of calling kzalloc with GFP_KERNEL which can sleep. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05Revert "drm/amd/display: Refactor SubVP cursor limiting logic"Ryan Seto24-148/+54
This reverts commit 19e743f0fb73 ("drm/amd/display: Refactor SubVP cursor limiting logic") Reason for revert: Corruption Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Ryan Seto <ryanseto@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-05-05drm/amd/display: Update IPS sequential_ono requirement checksOvidiu Bunea2-2/+2
[why & how] ASICs that require special RCG/PG programming are determined based on hw_internal_rev. Update these checks to properly include all such ASICs. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-22drm/amd/display: Refactor SubVP cursor limiting logicDillon Varone24-54/+148
[WHY] There are several gaps that can result in SubVP being enabled with incompatible HW cursor sizes, and unjust restrictions to cursor size due to wrong predictions on future usage of SubVP [HOW] - remove "prediction" logic in favor of tagging based on previous SubVP usage - block SubVP if current HW cursor settings are incompatible - provide interface for DM to determine if HW cursor should be disabled due to an attempt to enable SubVP Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-21drm/amdgpu: fix duplicated value setting in dce100_resource_construct()Alexandre Demers1-1/+1
i2c_speed_in_khz was set twice with the same values. Looking at other DCE versions, we probably wanted to set the value for i2c_speed_in_khz_hdcp. Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-08drm/amd/display/dc: reclassify DCE6 resources and hw sequencerAlexandre Demers3-8/+1591
Classify DCE6 resource and sequencer as they are for other DCE versions Put dce60_resource.c and .h under amd/display/dc/resource/dce60 Put and rename dce60_hw_sequencer.c and .h under amd/display/dc/hwss/dce60 v2: fix build when CONFIG_DRM_AMD_DC_SI=n (Alex) Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-04-07drm/amd/display: Remove the redundant NULL checkAndrey Vatoropin1-2/+0
Static analysis shows that pointer "timing" cannot be NULL because it points to the object "struct dc_crtc_timing". Remove the extra NULL check. It is meaningless and harms the readability of the code. Found by Linux Verification Center (linuxtesting.org) with SVACE. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: change kzalloc to kcalloc in dml1_validate()Ethan Carter Edwards1-1/+2
We are trying to get rid of all multiplications from allocation functions to prevent integer overflows. Here the multiplication is probably safe, but using kcalloc() is more appropriate and improves readability. This patch has no effect on runtime behavior. Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: change kzalloc to kcalloc in dcn314_validate_bandwidth()Ethan Carter Edwards1-1/+2
We are trying to get rid of all multiplications from allocation functions to prevent integer overflows. Here the multiplication is probably safe, but using kcalloc() is more appropriate and improves readability. This patch has no effect on runtime behavior. Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: change kzalloc to kcalloc in dcn31_validate_bandwidth()Ethan Carter Edwards1-1/+2
We are trying to get rid of all multiplications from allocation functions to prevent integer overflows. Here the multiplication is probably safe, but using kcalloc() is more appropriate and improves readability. This patch has no effect on runtime behavior. Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: change kzalloc to kcalloc in dcn30_validate_bandwidth()Ethan Carter Edwards1-1/+2
We are trying to get rid of all multiplications from allocation functions to prevent integer overflows. Here the multiplication is probably safe, but using kcalloc() is more appropriate and improves readability. This patch has no effect on runtime behavior. Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-03-10drm/amd/display: calculate the remain segments for all pipesZhikai Zhai1-22/+20
[WHY] In some cases the remain de-tile buffer segments will be greater than zero if we don't add the non-top pipe to calculate, at this time the override de-tile buffer size will be valid and used. But it makes the de-tile buffer segments used finally for all of pipes exceed the maximum. [HOW] Add the non-top pipe to calculate the remain de-tile buffer segments. Don't set override size to use the average according to pipe count if the value exceed the maximum. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-02-25drm/amd/display: Temporarily disable hostvm on DCN31Aurabindo Pillai1-1/+1
With HostVM enabled, DCN31 fails to pass validation for 3x4k60. Some Linux userspace does not downgrade one of the monitors to 4k30, and the result is that the monitor does not light up. Disable it until the bandwidth calculation failure is resolved. Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2026-02-02 01:59:07 +0000