aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/xe/regs (follow)
AgeCommit message (Collapse)AuthorFilesLines
2025-10-13drm/xe: Enable media sampler power gatingVinay Belgaumkar1-0/+1
Where applicable, enable media sampler power gating. Also, add it to the powergate_info debugfs. v2: Remove the sampler powergate status since it is cleared quickly anyway. v3: Use vcs mask (Rodrigo) and fix the version check for media v4: Remove extra spaces v5: Media samplers are independent of vcs mask, use Media version 1255 (Matt Roper) Fixes: 38e8c4184ea0 ("drm/xe: Enable Coarse Power Gating") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Link: https://lore.kernel.org/r/20251010011047.2047584-1-vinay.belgaumkar@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit 4cbc08649a54c3d533df9832342d52d409dfbbf0) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-09-18drm/xe/lrc: Allow INDIRECT_CTX for more engine classesLucas De Marchi1-3/+0
Currently it's only allowed for render and compute. Going forward we want to enable it for more engine classes. Let the XE_LRC_FLAG_INDIRECT_CTX flag (and thus gt_engine_needs_indirect_ctx()) be the deciding factor for its availability. While at it, add the missing const to rcs_funcs array. Since CTX_INDIRECT_CTX_OFFSET_DEFAULT already matches the HW default and gt_engine_needs_indirect_ctx() only ever enables it for rcs/ccs, there is no change in behavior, it's only preparation for future use case. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://lore.kernel.org/r/20250916-wa-bb-cmds-v5-5-306bddbc15da@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-09-05drm/xe/xe2hpg: Add Wa_18041344222 for Xe2_HPGHarish Chegondi1-0/+1
Add Wa_18041344222 for Xe2_HPG that requires disabling the perf mode for subslice count for eustall sampling when the enabled slices are discontiguous. Bspec: 79483, 56024 Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/b6a631a13a9fb7360e89d679e0797fae42d5a09e.1756855529.git.harish.chegondi@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-08-26drm/xe/xe_hw_error: Handle CSC Firmware reported Hardware errorsRiana Tauro2-1/+8
Add support to handle CSC firmware reported errors. When CSC firmware errors are encoutered, a error interrupt is received by the GFX device as a MSI interrupt. Device Source control registers indicates the source of the error as CSC The HEC error status register indicates that the error is firmware reported Depending on the type of error, the error cause is written to the HEC Firmware error register. On encountering such CSC firmware errors, the graphics device is non-recoverable from driver context. The only way to recover from these errors is firmware flash. System admin/userspace is notified of the necessity of firmware flash with a combination of vendor-specific drm device edged uevent, dmesg logs and runtime survivability sysfs. It is the responsiblity of the consumer to verify all the actions and then trigger a firmware flash using tools like fwupd. $ udevadm monitor --property --kernel monitor will print the received events for: KERNEL - the kernel uevent KERNEL[754.709341] change /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:01.0/0000:03:00.0/drm/card0 (drm) ACTION=change DEVPATH=/devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:01.0/0000:03:00.0/drm/card0 SUBSYSTEM=drm WEDGED=vendor-specific DEVNAME=/dev/dri/card0 DEVTYPE=drm_minor SEQNUM=5973 MAJOR=226 MINOR=0 Logs xe 0000:03:00.0: [drm] *ERROR* [Hardware Error]: Tile0 reported NONFATAL error 0x20000 xe 0000:03:00.0: [drm] *ERROR* [Hardware Error]: NONFATAL: HEC Uncorrected FW FD Corruption error reported, bit[2] is set xe 0000:03:00.0: Runtime Survivability mode enabled xe 0000:03:00.0: [drm] *ERROR* CRITICAL: Xe has declared device 0000:03:00.0 as wedged. IOCTLs and executions are blocked. Only a rebind may clear the failure Please file a _new_ bug report at https://gitlab.freedesktop.org/drm/xe/kernel/issues/new xe 0000:03:00.0: [drm] device wedged, needs recovery xe 0000:03:00.0: Firmware flash required, Please refer to the userspace documentation for more details! Runtime survivability Sysfs: /sys/bus/pci/devices/<device>/survivability_mode v2: use vendor recovery method with runtime survivability (Christian, Rodrigo, Raag) v3: move declare wedged to runtime survivability mode (Rodrigo) v4: update commit message Signed-off-by: Riana Tauro <riana.tauro@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://lore.kernel.org/r/20250826063419.3022216-10-riana.tauro@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-08-26drm/xe: Add support to handle hardware errorsRiana Tauro2-0/+16
Gfx device reports two classes of errors: uncorrectable and correctable. Depending on the severity uncorrectable errors are further classified Non-Fatal and Fatal. Correctable and Non-Fatal errors: These errors are reported as MSI. Bits in the Master Interrupt Register indicate the class of the error. The source of the error is then read from the Device Error Source Register. Fatal errors: These are reported as PCIe errors When a PCIe error is asserted, the OS will perform a SBR (Secondary Bus reset) which causes the driver to reload. The error registers are sticky and the values are maintained through SBR. Add basic support to handle these errors. Bspec: 50875, 53073, 53074, 53075, 53076 v2: Format commit message (Umesh) v3: fix documentation (Stuart) Cc: Stuart Summers <stuart.summers@intel.com> Co-developed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Signed-off-by: Riana Tauro <riana.tauro@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://lore.kernel.org/r/20250826063419.3022216-9-riana.tauro@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-08-12drm/xe/pf: Set VF LMEM BAR sizeMichał Winiarski1-0/+1
LMEM is partitioned between multiple VFs and we expect that the more VFs we have, the less LMEM is assigned to each VF. This means that we can achieve full LMEM BAR access without the need to attempt full VF LMEM BAR resize via pci_resize_resource(). Always try to set the largest possible BAR size that allows to fit the number of enabled VFs and inform the user in case the resize attempt is not successful. Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20250527120637.665506-7-michal.winiarski@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-25drm/xe/xelp: Add Wa_18022495364Tvrtko Ursulin1-0/+3
Add Wa_18022495364 as a context workaround batch buffer workaround. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Link: https://lore.kernel.org/r/20250711160153.49833-9-tvrtko.ursulin@igalia.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-24drm/xe: Rename MCFG_MCR_SELECTOR to STEER_SEMAPHORENitin Gote1-1/+1
The register at offset 0xfd0 was incorrectly named MCFG_MCR_SELECTOR, likely copied from i915. According to the hardware specification (Bspec), this register is actually called STEER_SEMAPHORE. Rename the register definition and update its usage in xe_gt_mcr.c to match the official hardware documentation. No functional changes. v2: Add Bspec reference (Tejas) Bspec: 67113 Signed-off-by: Nitin Gote <nitin.r.gote@intel.com> Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Link: https://lore.kernel.org/r/20250723141039.3848390-1-nitin.r.gote@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-17drm/xe/xe_debugfs: Exposure of G-State and pcie link state residency ↵Soham Purkait1-0/+10
counters through debugfs Add debug nodes, "dgfx_pkg_residencies" for G-states (G2, G6, G8, G10, ModS) and "dgfx_pcie_link_residencies" for PCIe link states(L0, L1, L1.2) residency counters. v1: - Expose all G-State residency counter values under dgfx_pkg_residencies. (Anshuman) - Include runtime_get/put. (Riana) v2: - Move offset macros to drm/xe/regs/xe_pmt. (Riana) v3: - Include debugfs node "dgfx_pcie_link_residencies" for pcie link residency counter values. (Anshuman) v4: - Include check for BMG and add helper function for repetitive code. (Riana) - Add for loop and local struct to avoid repetition. (Riana) - Use "drm_debugfs_create_files" to create debugfs. (Karthik) v5: - Reorder commits to reflect the correct dependency hierarchy. (Jonathan) - Simplification of commit message and rectified register offset.(Karthik) - Error handling and return before printing. (Riana) v6: - Remove check for DGFX as BMG is discrete. (Karthik) - Rearrange residency offsets in ascending order. (Riana) v7: - Squash the macros into the patch they are used in. (Lucas) Signed-off-by: Soham Purkait <soham.purkait@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Karthik Poosa <karthik.poosa@intel.com> Reviewed-by: Riana Tauro <riana.tauro@intel.com> Link: https://lore.kernel.org/r/20250716101412.3062780-2-soham.purkait@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-07-14drm/xe: Update register definitions in LRC layout headerXin Wang1-0/+2
Update the register definitions in xe_lrc_layout.h to align with the official hardware specification (Bspec) terminology. Specifically: - rename PVC_CTX_ACC_CTR_THOLD to CTX_ACC_CTR_THOLD - rename PVC_CTX_ASID to CTX_ASID Signed-off-by: Xin Wang <x.wang@intel.com> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250711060924.7373-1-x.wang@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-14drm/xe: Add plumbing for indirect context workaroundsTvrtko Ursulin1-0/+5
Some upcoming workarounds need to be emitted from the indirect workaround context so lets add some plumbing where they will be able to easily slot in. No functional changes for now since everything is still deactivated. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Bspec: 45954 Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250711160153.49833-7-tvrtko.ursulin@igalia.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-10drm/xe/pm: Wire up suspend/resume for I2C controllerRaag Jadav1-0/+5
Wire up suspend/resume handles for I2C controller to match its power state with SGUnit. Signed-off-by: Raag Jadav <raag.jadav@intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Karthik Poosa <karthik.poosa@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://lore.kernel.org/r/20250701122252.2590230-5-heikki.krogerus@linux.intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-07-10drm/xe: Support for I2C attached MCUsHeikki Krogerus4-1/+19
Adding adaption/glue layer where the I2C host adapter (Synopsys DesignWare I2C adapter) and the I2C clients (the microcontroller units) are enumerated. The microcontroller units (MCU) that are attached to the GPU depend on the OEM. The initially supported MCU will be the Add-In Management Controller (AMC). Co-developed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://lore.kernel.org/r/20250701122252.2590230-4-heikki.krogerus@linux.intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Rodrigo fixed the co-developed tags and SPDX format in the .c file]
2025-06-23drm/xe/nvm: add support for access modeAlexander Usyskin1-0/+4
Check NVM access mode from GSC FW status registers and overwrite access status read from SPI descriptor, if needed. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Link: https://lore.kernel.org/r/20250617145159.3803852-8-alexander.usyskin@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-06-18drm/xe/hwmon: Fix xe_hwmon_power_max_writeKarthik Poosa1-0/+1
Prevent other bits of mailbox power limit from being overwritten with 0. This issue was due to a missing read and modify of current power limit, before setting a requested mailbox power limit, which is added in this patch. v2: - Improve commit message. (Anshuman) v3: - Rebase. - Rephrase commit message. (Riana) - Add read-modify-write variant of xe_hwmon_pcode_write_power_limit() i.e. xe_hwmon_pcode_rmw_power_limit(). (Badal) - Use xe_hwmon_pcode_rmw_power_limit() to set mailbox power limits. - Remove xe_hwmon_pcode_write_power_limit() as all mailbox power limits writes use xe_hwmon_pcode_rmw_power_limit() only. v4: - Use PWR_LIM in place of (PWR_LIM_EN | PWR_LIM_VAL) wherever applicable. (Riana) Fixes: 7596d839f6228 ("drm/xe/hwmon: Add support to manage power limits though mailbox") Reviewed-by: Riana Tauro <riana.tauro@intel.com> Signed-off-by: Karthik Poosa <karthik.poosa@intel.com> Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Link: https://lore.kernel.org/r/20250617120030.612819-1-karthik.poosa@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-06-17drm/xe/oa: Enable OAM latency measurementAshutosh Dixit1-0/+3
Enable OAM latency measurement for Xe3+ platforms. Bspec: 58840 v2: Introduce DRM_XE_OA_UNIT_TYPE_OAM_SAG v3: Also add LNCF_MISC_CONFIG_REGISTER0 needed by MDAPI Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://lore.kernel.org/r/20250606192618.4133817-6-ashutosh.dixit@intel.com
2025-05-30drm/xe/hwmon: Read energy status from PMTKarthik Poosa2-2/+5
Read card and package energy status using pmt apis instead of xe_mmio for supported platforms. Enable Battlemage to read energy from PMT. v2: - Remove unused has_pmt_energy field. (Badal) - Use GENMASK to extract energy data. (Badal) v3: - Move PMT energy register offset and GENMASK to xe_pmt.h - Address review comments. (Jani) v4: - Remove unnecessary debug print. (Badal) v5: - Resolve an unused variable warning. - Add a return value check. Signed-off-by: Karthik Poosa <karthik.poosa@intel.com> Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Link: https://lore.kernel.org/r/20250529163458.2354509-6-karthik.poosa@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-05-30drm/xe/hwmon: Add support to manage power limits though mailboxKarthik Poosa2-9/+5
Add support to manage power limits using pcode mailbox commands for supported platforms. v2: - Address review comments. (Badal) - Use mailbox commands instead of registers to manage power limits for BMG. - Clamp the maximum power limit to GPU firmware default value. v3: - Clamp power limit in write also for platforms with mailbox support. v4: - Remove unnecessary debug prints. (Badal) v5: - Update description of variable pl1_on_boot to fix kernel-doc error. v6: - Improve commit message, refer to BIOS as GPU firmware. - Change macro READ_PL_FROM_BIOS to READ_PL_FROM_FW. - Rectify drm_warn to drm_info. Signed-off-by: Karthik Poosa <karthik.poosa@intel.com> Fixes: e90f7a58e659 ("drm/xe/hwmon: Add HWMON support for BMG") Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Link: https://lore.kernel.org/r/20250529163458.2354509-2-karthik.poosa@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-05-12drm/xe: Add WA BB to capture active context utilizationUmesh Nerlige Ramappa2-0/+7
Context Timestamp (CTX_TIMESTAMP) in the LRC accumulates the run ticks of the context, but only gets updated when the context switches out. In order to check how long a context has been active before it switches out, two things are required: (1) Determine if the context is running: To do so, we program the WA BB to set an initial value for CTX_TIMESTAMP in the LRC. The value chosen is 1 since 0 is the initial value when the LRC is initialized. During a query, we just check for this value to determine if the context is active. If the context switched out, it would overwrite this location with the actual CTX_TIMESTAMP MMIO value. Note that WA BB runs as the last part of the context restore, so reusing this LRC location will not clobber anything. (2) Calculate the time that the context has been active for: The CTX_TIMESTAMP ticks only when the context is active. If a context is active, we just use the CTX_TIMESTAMP MMIO as the new value of utilization. While doing so, we need to read the CTX_TIMESTAMP MMIO for the specific engine instance. Since we do not know which instance the context is running on until it is scheduled, we also read the ENGINE_ID MMIO in the WA BB and store it in the PPHSWP. Using the above 2 instructions in a WA BB, capture active context utilization. v2: (Matt Brost) - This breaks TDR, fix it by saving the CTX_TIMESTAMP register "drm/xe: Save CTX_TIMESTAMP mmio value instead of LRC value" - Drop tile from LRC if using gt "drm/xe: Save the gt pointer in LRC and drop the tile" v3: - Remove helpers for bb_per_ctx_ptr (Matt) - Add define for context active value (Matt) - Use 64 bit CTX TIMESTAMP for platforms that support it. For platforms that don't, live with the rare race. (Matt, Lucas) - Convert engine id to hwe and get the MMIO value (Lucas) - Correct commit message on when WA BB runs (Lucas) v4: - s/GRAPHICS_VER(...)/xe->info.has_64bit_timestamp/ (Matt) - Drop support for active utilization on a VF (CI failure) - In xe_lrc_init ensure the lrc value is 0 to begin with (CI regression) v5: - Minor checkpatch fix - Squash into previous commit and make TDR use 32-bit time - Update code comment to match commit msg Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4532 Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250509161159.2173069-8-umesh.nerlige.ramappa@intel.com
2025-05-12drm/xe/xe2hpg: Add Wa_22021007897Aradhya Bhatia1-0/+1
Add Wa_22021007897 for the Xe2_HPG (graphics version: 20.01) IP. It is a permanent workaround, and applicable on all the steppings. Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Signed-off-by: Aradhya Bhatia <aradhya.bhatia@intel.com> Link: https://lore.kernel.org/r/20250512065004.2576-1-aradhya.bhatia@intel.com Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
2025-04-09drm/xe: remove unused LE_COSShuicheng Lin1-1/+0
The LE_COS definition missed passing the value parameter to REG_FIELD_PREP. This didn't cause build errors because the entire macro was unused. The value for this field is universally "0" for every MOCS entry on the old Xe_LP platforms, and the whole field has been removed from Xe_HP onward. Just delete the line so that we don't have an unused definition. Suggested-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com> Link: https://lore.kernel.org/r/20250405171539.599850-1-shuicheng.lin@intel.com Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
2025-04-04drm/xe/xe2hpg: Add Wa_16025250150Aradhya Bhatia1-0/+12
Add Wa_16025250150 for the Xe2_HPG (graphics version: 20.01) platforms. It is a permanent workaround, and applicable on all the steppings. Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Signed-off-by: Aradhya Bhatia <aradhya.bhatia@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250325134421.1489416-1-aradhya.bhatia@intel.com Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
2025-03-20drm/xe: Apply Wa_16023105232Vinay Belgaumkar1-0/+4
The WA requires KMD to disable DOP clock gating during a semaphore wait and also ensure that idle delay for every CS is lower than the idle wait time in the PWRCTX_MAXCNT register. Default values for these registers already comply with this restriction. v2: Store timestamp_base in gt info and other comments (Daniele) v3: Skip WA check for VF v4: Review comments (Matt Roper) v5: Cleanup the clock functions and use reg_field_get (Matt Roper) v6: Fix checkpatch issue v7: Fix CI issue Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250320175123.3026754-1-vinay.belgaumkar@intel.com
2025-03-14drm/xe/hwmon: expose fan speedRaag Jadav1-0/+3
Add hwmon support for fan1_input, fan2_input and fan3_input attributes, which will expose fan speed of respective channels in RPM when supported by hardware. With this in place we can monitor fan speed using lm-sensors tool. v2: Rely on platform checks instead of mailbox error (Aravind, Rodrigo) v3: Introduce has_fan_control flag (Rodrigo) Signed-off-by: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250312085909.755073-1-raag.jadav@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-03-12drm/xe: Add MI_MATH and ALU instruction definitionsMichal Wajdeczko1-0/+4
The command streamer implements an Arithmetic Logic Unit (ALU) which supports basic arithmetic and logical operations on two 64-bit operands. Access to this ALU is thru the MI_MATH command and sixteen General Purpose Register (GPR) 64-bit registers, which are used as temporary storage. Bspec: 45737, 60236 # MI Bspec: 45525, 60132 # ALU Bspec: 45533, 60309 # GPR Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250304162307.1866-1-michal.wajdeczko@intel.com
2025-02-28drm/xe/xelp: L3 recommended hashing maskTvrtko Ursulin1-1/+3
According to the i915 codebase xe missed to set the recommended performance tuning for L3 hashing which is applicable to all legacy XeLP platforms. Lets add it. v2: * Rename prefixes to XELP_. * Tweak version end point. v3: * Add bspec tag. * Tweak version range. v4: * Move from LRC to engine tunings list. v5: * Drop L3 Cache Control comment. Bspec: 31870 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> References: c46c5fb725be ("drm/i915/gen12: Apply recommended L3 hashing mask") Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250227101304.46660-5-tvrtko.ursulin@igalia.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-02-28drm/xe/xe3lpg: Add Wa_13012615864Tejas Upadhyay1-0/+1
Wa_13012615864 applies to xe3lpg Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250221112200.388612-1-tejas.upadhyay@intel.com Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
2025-02-26drm/xe: Eliminate usage of TIMESTAMP_OVERRIDEMatt Roper1-4/+0
Recent discussions with the hardware architects have revealed that the TIMESTAMP_OVERRIDE register is never expected to hold a valid/useful value on production hardware. That register would only get used by hardware workarounds (although there are none that use it today) or during early internal hardware testing. Due to lack of documentation it's not clear exactly what the driver should be doing if CTC_MODE[0] is set (or even whether that's a setting that would ever be encountered on real hardware), but it's definitely not what Xe and i915 have been doing. So drop the incorrect code trying to use TIMESTAMP_REGISTER. If the driver does encounter CTC_MODE[0] in the wild, we'll print a warning and just continue trying to use the crystal clock frequency since that's probably less incorrect than what we're doing today. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250225224908.1671554-2-matthew.d.roper@intel.com Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
2025-02-26drm/xe/eustall: Add support to init, enable and disable EU stall samplingHarish Chegondi1-0/+29
Implement EU stall sampling APIs introduced in the previous patch for Xe_HPC (PVC). Add register definitions and the code that accesses these registers to the APIs. Add initialization and clean up functions and their implementations, EU stall enable and disable functions. v11: Move stream->xecore_buf alloc to xe_eu_stall_data_buf_alloc(). Register xe_eu_stall_fini() with devm_add_action_or_reset() instead of calling it from xe_gt_fini(). Changed a couple of variables in struct xe_eu_stall_data_stream from unsigned int to int. v10: Fixed error rewinding code Moved code around as per review feedback v9: Moved structure definitions from xe_eu_stall.h to xe_eu_stall.c Moved read and poll implementations to the next patch Used xe_bo_create_pin_map_at_aligned instead of xe_bo_create_pin_map Changed lock names as per review feedback Moved drop data handling into a subsequent patch Moved code around as per review feedback v8: Updated copyright year in xe_eu_stall_regs.h to 2025. Renamed struct drm_xe_eu_stall_data_pvc to struct xe_eu_stall_data_pvc since it is a local structure. v6: Fix buffer wrap around over write bug (Matt Olson) Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b6aeca593d521828a0b4fbf6cfd2844716c4fc66.1740533885.git.harish.chegondi@intel.com
2025-02-25drm/xe/regs: remove a duplicate definition for RING_CTL_SIZE(size)Mingcong Bai1-1/+0
Commit b79e8fd954c4 ("drm/xe: Remove dependency on intel_engine_regs.h") introduced an internal set of engine registers, however, as part of this change, it has also introduced two duplicate `define' lines for `RING_CTL_SIZE(size)'. This commit was introduced to the tree in v6.8-rc1. While this is harmless as the definitions did not change, so no compiler warning was observed. Drop this line anyway for the sake of correctness. Cc: stable@vger.kernel.org # v6.8-rc1+ Fixes: b79e8fd954c4 ("drm/xe: Remove dependency on intel_engine_regs.h") Signed-off-by: Mingcong Bai <jeffbai@aosc.io> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250225073104.865230-1-jeffbai@aosc.io Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-02-24drm/xe: Add engine activity supportRiana Tauro1-0/+2
GuC provides support to read engine counters to calculate the engine activity. KMD exposes two counters via the PMU interface to calculate engine activity Engine Active Ticks(engine-active-ticks) - active ticks of engine Engine Total Ticks (engine-total-ticks) - total ticks of engine Engine activity percentage can be calculated as below Engine activity % = (engine active ticks/engine total ticks) * 100. v2: fix cosmetic review comments add forcewake for gpm_ts (Umesh) v3: fix CI hooks error change function parameters and unpin bo on error of allocate_activity_buffers fix kernel-doc (Umesh) use engine activity (Umesh, Lucas) rename xe_engine_activity to xe_guc_engine_* fix commit message to use engine activity (Lucas, Umesh) v4: add forcewake in PMU layer v5: fix makefile use drmm_kcalloc instead of kmalloc_array remove managed bo skip init for VF fix cosmetic review comments (Michal) Signed-off-by: Riana Tauro <riana.tauro@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250224053903.2253539-2-riana.tauro@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-02-18drm/xe: Add xe_mmio_init() initialization functionIlia Levi1-1/+13
Add a convenience function for minimal initialization of struct xe_mmio. This function also validates that the entirety of the provided mmio region is usable with struct xe_reg. v2: Modify commit message, add kernel doc, refactor assert (Michal) v3: Fix off-by-one bug, add clarifying macro (Michal) v4: Derive bitfield width from size (Michal) Signed-off-by: Ilia Levi <ilia.levi@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250213093559.204652-1-ilia.levi@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-02-05drm/xe/hwmon: expose package and vram temperatureRaag Jadav2-0/+5
Add hwmon support for temp2_input and temp3_input attributes, which will expose package and vram temperature in millidegree Celsius. With this in place we can monitor temperature using lm-sensors tool. v2: Reuse existing channels (Badal, Karthik) Signed-off-by: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250131054502.1528555-1-raag.jadav@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-02-03drm/xe/pxp/uapi: Add userspace and LRC support for PXP-using queuesDaniele Ceraolo Spurio1-0/+1
Userspace is required to mark a queue as using PXP to guarantee that the PXP instructions will work. In addition to managing the PXP sessions, when a PXP queue is created the driver will set the relevant bits in its context control register. On submission of a valid PXP queue, the driver will validate all encrypted objects mapped to the VM to ensured they were encrypted with the current key. v2: Remove pxp_types include outside of PXP code (Jani), better comments and code cleanup (John) v3: split the internal PXP management to a separate patch for ease of review. re-order ioctl checks to always return -EINVAL if parameters are invalid, rebase on msix changes. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-9-daniele.ceraolospurio@intel.com
2025-02-03drm/xe/pxp: Handle the PXP termination interruptDaniele Ceraolo Spurio2-0/+14
When something happen to the session, the HW generates a termination interrupt. In reply to this, the driver is required to submit an inline session termination via the VCS, trigger the global termination and notify the GSC FW that the session is now invalid. v2: rename ARB define to make it cleaner to move it to uapi (John) v3: fix parameter name in documentation Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-6-daniele.ceraolospurio@intel.com
2025-02-03drm/xe/pxp: Initialize PXP structure and KCR regDaniele Ceraolo Spurio1-0/+17
As the first step towards adding PXP support, hook in the PXP init function, allocate the PXP structure and initialize the KCR register to allow PXP HWDRM sessions. v2: remove unneeded includes, free PXP memory on error (John) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-2-daniele.ceraolospurio@intel.com
2025-01-21drm/xe/oa: Preserve oa_ctrl unused bitsAshutosh Dixit1-0/+6
UMD's have interest in setting unused bits of the oa_ctrl register "out of band" for certain experiments. To facilitate this, don't clobber previous oa_ctrl unused bits, i.e. rmw the values rather than simply write them. Fixes: e936f885f1e9 ("drm/xe/oa/uapi: Expose OA stream fd") Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250117032155.3048063-1-ashutosh.dixit@intel.com
2025-01-15drm/xe/xe3: Generate and store the L3 bank maskFrancois Dugast1-0/+3
On Xe3, the register used to indicate which L3 banks are enabled on the system is a new one called MIRROR_L3BANK_ENABLE. Each bit represents one bank enabled in each node. Extend the existing topology code for Xe3 to read this register and generate the correct L3 bank mask, which can be read by user space throug the topology query. Bspec: 72573, 73439 Signed-off-by: Francois Dugast <francois.dugast@intel.com> Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250114203853.35055-1-matthew.s.atwood@intel.com Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
2025-01-14drm/xe: Remove unused "mmio_ext" codeMatt Roper1-15/+1
The "mmio_ext" and 'REG_EXT" code is currently unused on any existing platform. Going forward, this also isn't the design we want to use for any future platforms/features either, so we should just go ahead and remove the dead code to avoid confusion. mmio_ext was originally added in an attempt to hack around the early (mis)design of the Xe driver, which used xe_gt as the target for all register MMIO access, even those completely unrelated to the GT subunit of the hardware. With the introduction of commit 34953ee349dd ("drm/xe: Create dedicated xe_mmio structure") and its follow-up patches, that misdesign has been corrected and access to register MMIO regions specific to hardware units is now done through xe_mmio structures which encapsulate an iomap, region size, and some other metadata. Although all of the registers used by the driver today happen to fall within one specific PCI BAR region, and thus re-use a single device-wide iomap, there's no requirement that this stay true for future platforms or features. I.e., if a future platform adds a new 'foo' hardware unit that exists at a different area in the BAR, or even in a completely different BAR, then that would be handled by doing a separate iomap of that unit's register region and wrapping it in its own 'struct xe_mmio foo_regs' structure. The pointer to the new 'foo_regs' could be placed within the xe_device, xe_tile, xe_gt, etc., according to where the new hardware unit falls within the current hardware hierarchy. This effectively reverts the following commits, although parts of these commits had already vanished or changed with the earlier xe_mmio refactor work: - commit 399a13323f0d ("drm/xe: add 28-bit address support in struct xe_reg") - commit fdef72e02e20 ("drm/xe: add a flag to bypass multi-tile config from MTCFG reg") - commit 866b2b176434 ("drm/xe: add MMIO extension support flags") - commit ef29b390c734 ("drm/xe: map MMIO BAR according to the num of tiles in device desc") - commit a4e2f3a299ea ("drm/xe: refactor xe_mmio_probe_tiles to support MMIO extension") Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Koby Elbaz <kelbaz@habana.ai> Acked-by: Maciej Patelczyk <maciej.patelczyk@intel.com> Reviewed-by: Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250106234312.2986065-2-matthew.d.roper@intel.com Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
2025-01-13drm/xe/ptl: Apply Wa_14023061436Nirmoy Das1-0/+3
Enable WMTP for the BTD kernel to address Wa14023061436 by setting the proper TDL Chicken Bit. v2: Apply it on engine_was[] as this register is not part of LRC(Matt) Apply it for first_render_or_compute in case this gets extended to compute only platforms(Matt). Cc: Gustavo Sousa <gustavo.sousa@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250108141323.311601-1-nirmoy.das@intel.com Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
2025-01-09drm/xe: Fix all typos in xeNitin Gote1-1/+1
Fix all typos in files of xe, reported by codespell tool. Signed-off-by: Nitin Gote <nitin.r.gote@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250106102646.1400146-2-nitin.r.gote@intel.com Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
2025-01-08drm/xe: Introduce the RPa informationRodrigo Vivi1-0/+4
RPa is the Achievable frequency, defined by PCODE at runtime based on multiple running conditions. v2: Remove RPA_MASK from i915 file Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241220152936.623627-1-rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-12-13drm/xe: Initial MSI-X support for HW enginesIlia Levi2-0/+6
- Configure the HW engines to work with MSI-X - Program the LRC to use memirq infra (similar to VF) - CS_INT_VEC field added to the LRC Bspec: 60342, 72547 Signed-off-by: Ilia Levi <ilia.levi@intel.com> Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241213072538.6823-3-ilia.levi@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-12-10drm/xe/oa/uapi: Make OA buffer size configurableSai Teja Pottumuttu1-8/+1
Add a new property called DRM_XE_OA_PROPERTY_OA_BUFFER_SIZE to allow OA buffer size to be configurable from userspace. With this OA buffer size can be configured to any power of 2 size between 128KB and 128MB and it would default to 16MB in case the size is not supplied. v2: - Rebase v3: - Add oa buffer size to capabilities [Ashutosh] - Address several nitpicks [Ashutosh] - Fix commit message/subject [Ashutosh] BSpec: 61100, 61228 Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241205041913.883767-2-sai.teja.pottumuttu@intel.com
2024-12-03drm/xe/vsec: Support BMG devicesMichael J. Ruhl1-0/+19
The Battlemage (BMG) discrete graphics card supports the Platform, Monitoring Technology (PMT) feature directly on the primary PCI device. Utilize the PMT callback API to add support for the BMG devices. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241203153639.2982162-1-michael.j.ruhl@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-11-27drm/xe/xe3lpg: Add Wa_16024792527Apoorva Singh1-0/+2
Force Sampler Tile64 Overfetch via MMIO Signed-off-by: Apoorva Singh <apoorva.singh@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241107082158.1436637-1-apoorva.singh@intel.com Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-11-01drm/xe: Set mask bits for CCS_MODE registerBalasubramani Vivekanandan1-1/+1
CCS_MODE register requires setting mask bits from Xe2+ platforms. Set the mask bits unconditionally, as those bits are unused for older platforms. Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Cc: stable@vger.kernel.org # v6.11+ Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241008073628.377433-2-balasubramani.vivekanandan@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-10-29drm/xe/guc: Capture all available bits of GuC timestampJohn Harrison1-1/+2
The extra bits are not hugely useful because the GuC log only uses 32bit time stamps. But they exist so might as well provide them. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241024002554.1983101-2-John.C.Harrison@Intel.com
2024-10-09drm/xe/xe3: Add initial set of workaroundsGustavo Sousa2-0/+4
Implement the initial set of workarounds for Xe3 IPs. Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241008204626.55802-2-matthew.s.atwood@intel.com
2024-10-09drm/xe/bmg: improve cache flushing behaviourMatthew Auld1-3/+0
The BSpec says that EN_L3_RW_CCS_CACHE_FLUSH must be toggled on for manual global invalidation to take effect and actually flush device cache, however this also turns on flushing for things like pipecontrol, which occurs between submissions for compute/render. This sounds like massive overkill for our needs, where we already have the manual flushing on the display side with the global invalidation. Some observations on BMG: 1. Disabling l2 caching for host writes and stubbing out the driver global invalidation but keeping EN_L3_RW_CCS_CACHE_FLUSH enabled, has no impact on wb-transient-vs-display IGT, which makes sense since the pipecontrol is now flushing the device cache after the render copy. Without EN_L3_RW_CCS_CACHE_FLUSH the test then fails, which is also expected since device cache is now dirty and display engine can't see the writes. 2. Disabling EN_L3_RW_CCS_CACHE_FLUSH, but keeping the driver global invalidation also has no impact on wb-transient-vs-display. This suggests that the global invalidation still works as expected and is flushing the device cache without EN_L3_RW_CCS_CACHE_FLUSH turned on. With that drop EN_L3_RW_CCS_CACHE_FLUSH. This helps some workloads since we no longer flush the device cache between submissions as part of pipecontrol. Edit: We now also have clarification from HW side that BSpec was indeed wrong here. v2: - Rebase and update commit message. BSpec: 71718 Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Vitasta Wattal <vitasta.wattal@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241007074541.33937-2-matthew.auld@intel.com
generated by cgit v1.2.3 (git 2.39.1) at 2026-02-06 10:12:57 +0000