| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and thunderbolt drivers for 6.18-rc1. It
was another normal development cycle, with lots of the usual drivers
getting updates:
- Thunderbolt driver cleanups and additions
- dwc3 driver updates
- dwc2 driver updates
- typec driver updates
- xhci driver updates and additions
- offload USB engine updates for better power management
- unused tracepoint removals
- usb gadget fixes and updates as more users start to rely on these
drivers instead of the "old" function gadget drivers
- new USB device ids
- other minor driver USB driver updates
- new USB I/O driver framework and driver additions"
The last item, the usb i/o driver, has an i2c and gpio driver added
through this tree. Those drivers were acked by the respective
subsystem maintainers.
All of these have been in linux-next for a while"
* tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (132 commits)
usb: vhci-hcd: Prevent suspending virtually attached devices
USB: serial: option: add SIMCom 8230C compositions
thunderbolt: Fix use-after-free in tb_dp_dprx_work
usb: xhci: align PORTSC trace with one-based port numbering
usb: xhci: correct indentation for PORTSC tracing function
usb: xhci: improve TR Dequeue Pointer mask
usb: xhci-pci: add support for hosts with zero USB3 ports
usb: xhci: Update a comment about Stop Endpoint retries
Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running"
usb: gadget: f_rndis: Refactor bind path to use __free()
usb: gadget: f_ecm: Refactor bind path to use __free()
usb: gadget: f_acm: Refactor bind path to use __free()
usb: gadget: f_ncm: Refactor bind path to use __free()
usb: gadget: Introduce free_usb_request helper
usb: gadget: Store endpoint pointer in usb_request
usb: host: xhci-rcar: Add Renesas RZ/G3E USB3 Host driver support
usb: host: xhci-plat: Add .post_resume_quirk for struct xhci_plat_priv
usb: host: xhci-rcar: Move R-Car reg definitions
dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
usb: gadget: f_fs: Fix epfile null pointer access after ep enable.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Mostly DT bindings additions this time because Andi was super busy and
I also could only partly cover it.
- new ids for qcom-cci, mt65xx, exynos5, apple, tegra20, k1, i801
- drop support for already removed S3C2410
- introduce and use fwnode_for_each_child_node_scoped()
- mmt65xx: improve write-then-read transactions
- k1: various fixes around bus errors and resets
- usual share of cleanups, minor improvements, PM fixes...
at24 updates:
- add the compatible for Giantec GT24C256C to the device-tree
bindings"
* tag 'i2c-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (33 commits)
i2c: i801: Add support for Intel Wildcat Lake-U
dt-bindings: i2c: i2c-mt65xx: Add MediaTek MT8196/6991 compatibles
i2c: designware: Add disabling clocks when probe fails
i2c: designware: Fix clock issue when PM is disabled
i2c: busses: Fix some spelling errors
i2c: mux: Simplify boolean assignment in i2c_mux_alloc
i2c: designware: use dev_err_probe() when probing platform device
i2c: designware: convert to dev_err_probe() on request IRQ error
i2c: spacemit: ensure SDA is released after bus reset
i2c: spacemit: check SDA instead of SCL after bus reset
i2c: spacemit: disable SDA glitch fix to avoid restart delay
i2c: spacemit: remove stop function to avoid bus error
i2c: spacemit: ensure bus release check runs when wait_bus_idle() fails
i2c: mediatek: fix potential incorrect use of I2C_MASTER_WRRD
i2c: boardinfo: Annotate code used in init phase only
dt-bindings: i2c: i2c-mt65xx: Document MediaTek MT6878 I2C
dt-bindings: i2c: samsung,s3c2410-i2c: Drop S3C2410
i2c: s3c2410: Drop S3C2410 OF support
dt-bindings: i2c: spacemit,k1-i2c: Minor whitespace cleanup in example
dt-bindings: i2c: exynos5: add samsung,exynos8890-hsi2c compatible
...
|
|
Add SMBus IDs on Intel Wildcat Lake-U.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
This driver supports I2C adapter functionality for NCT6694 MFD
device based on USB interface.
Each I2C controller uses the default baudrate of 100kHz, which
can be overridden via module parameters.
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-4-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add a a driver for the I2C auxbus child device of the Intel USBIO USB
IO-expander used by the MIPI cameras on various new (Meteor Lake and
later) Intel laptops.
Co-developed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Israel Cepeda <israel.a.cepeda.lopez@intel.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250911181343.77398-4-hansg@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
LAN969x uses the Atmel TWI I2C, so make it selectable for ARCH_MICROCHIP to
avoid needing to update depends in future if other Microchip SoC-s use it
as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
When the first driver for Apple Silicon was upstreamed we accidentally
included `default ARCH_APPLE` in its Kconfig which then spread to almost
every subsequent driver. As soon as ARCH_APPLE is set to y this will
pull in many drivers as built-ins which is not what we want.
Thus, drop `default ARCH_APPLE` from Kconfig.
Signed-off-by: Sven Peter <sven@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
"Mostly a few lines fixed here and there except amd/isp4 which improves
swnodes relationships but that is a new driver not in any stable
kernels yet. The think-lmi driver changes also look relatively large
but there are just many fixes to it.
The i2c/piix4 change is a effectively a revert of the commit
7e173eb82ae9 ("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on
CONFIG_X86") but that required moving the header out from arch/x86
under include/linux/platform_data/
Summary:
- amd/isp4: Improve swnode graph (new driver exception)
- asus-nb-wmi: Use duo keyboard quirk for Zenbook Duo UX8406CA
- dell-lis3lv02d: Add Latitude 5500 accelerometer address
- dell-wmi-sysman: Fix WMI data block retrieval and class dev unreg
- hp-bioscfg: Fix class device unregistration
- i2c: piix4: Re-enable on non-x86 + move FCH header under platform_data/
- intel/hid: Wildcat Lake support
- mellanox:
- mlxbf-pmc: Fix duplicate event ID
- mlxbf-tmfifo: Fix vring_desc.len assignment
- mlxreg-lc: Fix bit-not-set logic check
- nvsw-sn2201: Fix bus number in error message & spelling errors
- portwell-ec: Move watchdog device under correct platform hierarchy
- think-lmi: Error handling fixes (sysfs, kset, kobject, class dev unreg)
- thinkpad_acpi: Handle HKEY 0x1402 event (2025 Thinkpads)
- wmi: Fix WMI event enablement"
* tag 'platform-drivers-x86-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (22 commits)
platform/x86: think-lmi: Fix sysfs group cleanup
platform/x86: think-lmi: Fix kobject cleanup
platform/x86: think-lmi: Create ksets consecutively
platform/mellanox: mlxreg-lc: Fix logic error in power state check
i2c: Re-enable piix4 driver on non-x86
Move FCH header to a location accessible by all archs
platform/x86/intel/hid: Add Wildcat Lake support
platform/x86: dell-wmi-sysman: Fix class device unregistration
platform/x86: think-lmi: Fix class device unregistration
platform/x86: hp-bioscfg: Fix class device unregistration
platform/x86: Update swnode graph for amd isp4
platform/x86: dell-wmi-sysman: Fix WMI data block retrieval in sysfs callbacks
platform/x86: wmi: Update documentation of WCxx/WExx ACPI methods
platform/x86: wmi: Fix WMI event enablement
platform/mellanox: nvsw-sn2201: Fix bus number in adapter error message
platform/mellanox: Fix spelling and comment clarity in Mellanox drivers
platform/mellanox: mlxbf-pmc: Fix duplicate event ID for CACHE_DATA1
platform/x86: thinkpad_acpi: handle HKEY 0x1402 event
platform/x86: asus-nb-wmi: add DMI quirk for ASUS Zenbook Duo UX8406CA
platform/x86: dell-lis3lv02d: Add Latitude 5500
...
|
|
loongarch and mips both support hardware that uses the i2c-piix4 driver.
It should not be restricted to x86, so drop the x86 dependency.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdVPQLjOox5sMp34Z5MTwKv2WOpHa=MpZr8hWG22fQKcjw@mail.gmail.com/
Fixes: 7e173eb82ae97175 ("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on CONFIG_X86").
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250610205817.3912944-2-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
It already depends on X86_32, but that's also set for ARCH=um.
Recent changes made UML no longer have IO port access since
it's not needed, but this driver uses it. Build it only for
HAS_IOPORT. This is pretty much the same as depending on X86,
but on the off-chance that HAS_IOPORT will ever be optional
on x86 HAS_IOPORT is the real prerequisite.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Core updates:
- move towards using the 'fwnode' handle instead of 'of_node'
(meaning 'of_node' even gets removed from i2c_board_info)
- add support for Write Disable-aware SPD eeproms
- minor stuff (use new helpers, typo fixes)
i2c-atr (address translator) updates:
- support per-channel alias pools
- added support for dynamic address translation (also adds FPC202
driver as its user)
- add 'static' and 'passthrough' flags
Cleanups and refactorings
- Many drivers switched to dev_err_probe()
- Generic cleanups applied to designware, iproc, ismt, mlxbf,
npcm7xx, qcom-geni, pasemi, and thunderx
- davinci: declare I2C mangling support among I2C features
- designware: clean up DTS handling
- designware: fix PM runtime on driver unregister
- imx: improve error logging during probe
- lpc2k: improve checks in probe error path
- xgene-slimpro: improve PCC shared memory handling
- pasemi: improve error handling in reset, smbus clear, timeouts
- tegra: validate buffer length during transfers
- wmt: convert binding to YAML format
Improvements and extended support:
- microchip-core: add SMBus support
- mlxbf: add support for repeated start in block transfers
- mlxbf: improve timer configuration
- npcm: attempt clock toggle recovery before failing init
- octeon: add support for block mode operations
- pasemi: add support for unjam device feature
- riic: add support for bus recovery
New device support:
- MediaTek Dimensity 1200 (MT6893)
- Sophgo SG2044
- Renesas RZ/V2N (R9A09G056)
- Rockchip RK3528
- AMD ISP (new driver)"
* tag 'i2c-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (89 commits)
i2c: Use str_read_write() helper
i2c: mlxbf: avoid 64-bit division
i2c: viai2c-wmt: Replace dev_err() with dev_err_probe() in probe function
i2c: designware: Don't warn about missing get_clk_rate_khz
i2c: designware: Invoke runtime suspend on quick slave re-registration
i2c-mlxbf: Improve I2C bus timing configuration
i2c-mlxbf: Add repeated start condition support
i2c: xgene-slimpro: Replace dev_err() with dev_err_probe() in probe function
dt-bindings: i2c: i2c-wmt: Convert to YAML
i2c: microchip-corei2c: add smbus support
i2c: mlxbf: Allow build with COMPILE_TEST
i2c: I2C_DESIGNWARE_AMDISP should depend on DRM_AMD_ISP
i2c: atr: add passthrough flag
i2c: atr: add static flag
i2c: atr: allow replacing mappings in attach_addr()
i2c: atr: deduplicate logic in attach_addr()
i2c: atr: do not create mapping in detach_addr()
i2c: atr: split up i2c_atr_get_mapping_by_addr()
i2c: atr: find_mapping() -> get_mapping()
i2c: atr: Fix lockdep for nested ATRs
...
|
|
Extend the Kconfig dependency to include COMPILE_TEST so the
Mellanox BlueField I2C driver can be built on non-ARM64 platforms
for compile testing purposes.
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Cc: Khalil Blaiech <kblaiech@nvidia.com>
Cc: Asmaa Mnebhi <asmaa@nvidia.com>
Link: https://lore.kernel.org/r/20250505215854.2896383-1-andi.shyti@kernel.org
|
|
The AMD Image Signal Processor I2C functionality is only present on AMD
platforms with ISP support, and its platform device is instantiated by
the AMD ISP driver. Hence add a dependency on DRM_AMD_ISP, to prevent
asking the user about this driver when configuring a kernel that does
not support the AMD ISP.
Fixes: d6263c468a76 ("i2c: amd-isp: Add ISP i2c-designware driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Link: https://lore.kernel.org/r/3888f892b8c4d8c8acd17e56581e726ace7f7092.1746536495.git.geert+renesas@glider.be
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The camera sensor is connected via ISP I2C bus in AMD SOC
architectures. Add new I2C designware driver to support
new camera sensors on AMD HW.
Co-developed-by: Venkata Narendra Kumar Gutta <vengutta@amd.com>
Signed-off-by: Venkata Narendra Kumar Gutta <vengutta@amd.com>
Co-developed-by: Bin Du <bin.du@amd.com>
Signed-off-by: Bin Du <bin.du@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250424184952.1290019-1-pratap.nirujogi@amd.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
PIIX4 and compatible controllers are only for X86. As some headers are
being moved into x86 specific headers PIIX4 won't compile on non-x86.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Sanket Goswami <Sanket.Goswami@amd.com>
Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: linux-i2c@vger.kernel.org
Link: https://lore.kernel.org/r/20250422234830.2840784-3-superm1@kernel.org
|
|
This patch introduces basic I2C support for the SpacemiT K1 SoC,
utilizing interrupts for transfers.
The driver has been tested using i2c-tools on a Bananapi-F3 board,
and basic I2C read/write operations have been confirmed to work.
Signed-off-by: Troy Mitchell <troymitchell988@gmail.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250319-k1-i2c-master-v8-2-013e2df2b78d@gmail.com
|
|
Some SoCs require muxes in the routing for SDA and SCL lines.
Therefore, add support for setting the mux by reading the mux-states
property from the dt-node.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20250318103622.29979-3-j-choudhary@ti.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The addition of target mode causes a build failure when CONFIG_I2C_SLAVE
is turned off:
drivers/i2c/busses/i2c-imx-lpi2c.c:1273:10: error: 'const struct i2c_algorithm' has no member named 'reg_target'
1273 | .reg_target = lpi2c_imx_register_target,
| ^~~~~~~~~~
drivers/i2c/busses/i2c-imx-lpi2c.c:1274:10: error: 'const struct i2c_algorithm' has no member named 'unreg_target'
1274 | .unreg_target = lpi2c_imx_unregister_target,
| ^~~~~~~~~~~~
Select the Kconfig symbol like we do for other similar drivers.
Fixes: 1ee867e465c1 ("i2c: imx-lpi2c: add target mode support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Merely enabling compile-testing should not enable additional
functionality.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/36b2923241f285595f43bb9565da352fd366c63e.1733242595.git.geert+renesas@glider.be
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The AMBA bus header files do not generate compilation errors even
when the AMBA bus is not enabled in Kconfig via ARM_AMBA.
This allows the Nomadik driver to be compiled for testing
purposes with the COMPILE_TEST option enabled.
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241210221641.2661577-1-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Core:
- drivers can now use a GPIO as a side channel for SMBus Alerts using
a generic binding
- regular stuff like mem leak fix, Makefile maintenance...
Host improvements and refactoring:
- All controllers using the 'remove_new' callback have been reverted
to use the 'remove' callback
- Intel SCH controller underwent significant refactoring, this brings
love and a modern look to the driver
- PIIX4 driver refactored to enable usage by other drivers (e.g., AMD
ASF)
- iMX/MXC improved message handling to reduce protocol overhead:
Refactored DMA/non-DMA read/write and bus polling mechanisms to
achieve this.
- ACPI documentation for PIIX4
New host features:
- i2c-cadence support for atomic transfers
- Qualcomm CII support for a 32MHz serial engine clock
Deprecated features:
- Dropped outdated support for AMD756 S4882 and NFORCE2 S4985. If
somebody misses this, Jean will rewrite support using the proper
i2c mux framework.
New hardware IDs for existing drivers:
- Intel Panther Lake
- S32G2/S32G3 SoCs
- HJMC01 DesignWare ACPI HID
- PIC64GX to Microchip Core
- Qualcomm SDM670 to Qualcomm CCI
New drivers:
- AMD ASF
- Realtek RTL I2C Controller
at24 updates:
- add support for the lockable page on ST M24256E"
* tag 'i2c-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (59 commits)
docs: i2c: piix4: Add ACPI section
i2c: Add driver for the RTL9300 I2C controller
i2c: qcom-cci: Remove unused struct member cci_clk_rate
dt-bindings: i2c: Add Realtek RTL I2C Controller
i2c: busses: Use *-y instead of *-objs in Makefile
i2c: imx: add support for S32G2/S32G3 SoCs
dt-bindings: i2c: imx: add SoC specific compatible strings for S32G
i2c: qcom-cci: Remove the unused variable cci_clk_rate
i2c: Drop legacy muxing pseudo-drivers
i2c: imx: prevent rescheduling in non dma mode
i2c: imx: separate atomic, dma and non-dma use case
i2c: imx: do not poll for bus busy in single master mode
i2c: designware: Add a new ACPI HID for HJMC01 I2C controller
i2c: qcom-geni: Keep comment why interrupts start disabled
dt-bindings: i2c: microchip: corei2c: Add PIC64GX as compatible with driver
i2c: designware: constify abort_sources
i2c: Switch back to struct platform_driver::remove()
i2c: qcom-geni: Support systems with 32MHz serial engine clock
i2c: qcom-cci: Stop complaining about DT set clock rate
dt-bindings: i2c: qcom-cci: Document SDM670 compatible
...
|
|
Add support for the I2C controller on the RTL9300 SoC. There are two I2C
controllers in the RTL9300 that are part of the Ethernet switch register
block. Each of these controllers owns a SCL pin (GPIO8 for the fiorst
I2C controller, GPIO17 for the second). There are 8 possible SDA pins
(GPIO9-16) that can be assigned to either I2C controller. This
relationship is represented in the device tree with a child node for
each SDA line in use.
This is based on the openwrt implementation[1] but has been
significantly modified
[1] - https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/realtek/files-5.15/drivers/i2c/busses/i2c-rtl9300.c
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
While at it, fix an obvious typo in help section of the Kconfig.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Some S32G2/S32G3 SoC I2C particularities exist
such as different <clock divider, register value> pairs.
Those are addressed by adding specific S32G2 and S32G3
compatible strings.
Co-developed-by: Ionut Vicovan <Ionut.Vicovan@nxp.com>
Signed-off-by: Ionut Vicovan <Ionut.Vicovan@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The i2c-amd756-s4882 and i2c-nforce2-s4985 muxing pseudo-drivers were
written at a time when the i2c core did not support muxing. They are
essentially board-specific hacks. If we had to add support for these
boards today, we would implement it in a completely different way.
These Tyan server boards are 19 years old by now, so I very much doubt
any of these is still running today. So let's just drop this clumsy
code. If anyone really still needs this support and complains, I'll
rewrite it in a proper way on top of i2c-mux.
This also fixes the following warnings:
drivers/i2c/busses/i2c-amd756.c:286:20: warning: symbol 'amd756_smbus' was not declared. Should it be static?
drivers/i2c/busses/i2c-nforce2.c:123:20: warning: symbol 'nforce2_smbus' was not declared. Should it be static?
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Andi Shyti <andi.shyti@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Implement the i2c_algorithm operations to enable support for AMD ASF
(Alert Standard Format) with SMBus. This enhancement includes:
- Adding functionality to identify and select the supported ASF functions.
- Implementing mechanisms for registering and deregistering I2C slave
devices.
- Providing support for data transfer operations over ASF.
Additionally, include a 'select' Kconfig entry as the current patch
utilizes .reg_slave() and .unreg_slave() callbacks, which are controlled
by CONFIG_I2C_SLAVE.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The AMD ASF controller is presented to the operating system as an ACPI
device. The AMD ASF driver can use ACPI to obtain information about the
ASF controller's attributes, such as the ASF address space and interrupt
number, and to handle ASF interrupts.
Currently, the piix4 driver assumes that a specific port address is
designated for AUX operations. However, with the introduction of ASF, the
same port address may also be used by the ASF controller. Therefore, a
check needs to be added to ensure that if ASF is advertised and enabled in
ACPI, the AUX port should not be configured.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add SMBus PCI IDs on Intel Panther Lake-P and -U.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add i2c support for the Congatec Board Controller.
The Board Controller has two i2c busses, a General Purpose bus and a Power
Management bus.
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20241001-congatec-board-controller-v3-3-39ceceed5c47@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The KEBA I2C controller is only present on KEBA PLC devices. Hence add
a dependency on KEBA_CP500, to prevent asking the user about this driver
when configuring a kernel without KEBA CP500 system FPGA support.
Fixes: c7e08c816cd2fdf8 ("i2c: keba: Add KEBA I2C controller support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Gerhard Engleder <eg@keba.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The KEBA I2C controller is found in the system FPGA of KEBA PLC devices.
It is used to connect EEPROMs and hardware monitoring chips. The
It is a simple I2C controller with a fixed bus speed of 100 kbit/s. The
whole message transmission is executed by the driver. The driver
triggers all steps over control, status and data register. There are no
FIFOs or interrupts.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
There are quite a few drivers and options for the DesignWare
I2C adapter in the Kconfig. Grouping all of them under the
I2C_DESIGNWARE_CORE. That makes the menuconfig a bit more
easier to understand.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The piix4 I2C bus can carry SPDs, register them if present.
Only look on bus 0, as this is where the SPDs seem to be located.
Only the first 8 slots are supported. If the system has more,
then these will not be visible.
The AUX bus can not be probed as on some platforms it reports all
devices present and all reads return "0".
This would allow the ee1004 to be probed incorrectly.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Introduce i2c support to Airoha EN7581 SoC through the i2c-mt7621
driver.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Ray Liu <ray.liu@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add SMBus PCI ID on Intel Arrow Lake-H.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add Zhaoxin I2C controller driver. It provides the access to the i2c
busses, which connects to the touchpad, eeprom, I2S, etc.
Zhaoxin I2C controller has two separate busses, so may accommodate up
to two I2C adapters. Those adapters are listed in the ACPI namespace
with the IIC1D17 HID, and probed by a platform driver.
The driver works with IRQ mode, and supports basic I2C features. Flags
I2C_AQ_NO_ZERO_LEN and I2C_AQ_COMB_WRITE_THEN_READ are used to limit
the unsupported access.
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Hans Hu <hanshu-oc@zhaoxin.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add RISCV support to Cadence I2C Kconfig which is used in platform
such as the StarFive JH8100.
Signed-off-by: Eng Lee Teh <englee.teh@starfivetech.com>
Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The original change adds usage of i2c_root_adapter(), which is
implemented in i2c-mux.c. Therefore we can't use the multiplexing
if I2C_I801=y and I2C_MUX=m.
Handling the dependencies in the code would become unnecessarily
complex, therefore create a new config symbol.
Fixes: 893fef0bc6aa ("i2c: i801: Call i2c_register_spd for muxed child segments")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404042206.MjAQC32x-lkp@intel.com/
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
There is at least one machine that uses this driver but does not
have support for inb()/outb() instructions.
Convert this to using ioport_map() so it can build on architectures
that don't provide these but work correctly on machines that require
using port I/O.
Fixes: 47c21d2d52e0 ("i2c: add HAS_IOPORT dependencies")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/lkml/CAMuHMdVUQ2WgtpYPYfO2T=itMmZ7w=geREqDtsP8Q3ODh9rxdw@mail.gmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add HAS_IOPORT as dependency for those
drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Currently, all Kconfig symbols for R-Car Gen4 SoCs select
ARCH_RCAR_GEN3, which might confuse the casual reader. Prepare for the
advent of ARCH_RCAR_GEN4 by extending the dependency for auto-selecting
reset controller support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C has largely driver updates for 6.7, i.e. feature additions (like
adding transfers while in atomic mode), using new helpers (like
devm_clk_get_enabled), new IDs, documentation fixes and additions...
you name it.
The core got a memleak fix and better support for nested muxes"
* tag 'i2c-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (53 commits)
i2c: s3c2410: make i2c_s3c_irq_nextbyte() void
i2c: qcom-geni: add ACPI device id for sc8180x
Documentation: i2c: add fault code for not supporting 10 bit addresses
i2c: sun6i-p2wi: Prevent potential division by zero
i2c: mux: demux-pinctrl: Convert to use sysfs_emit_at() API
i2c: i801: Use new helper acpi_use_parent_companion
ACPI: Add helper acpi_use_parent_companion
MAINTAINERS: add YAML file for i2c-demux-pinctrl
i2c: core: fix lockdep warning for sparsely nested adapter chain
i2c: axxia: eliminate kernel-doc warnings
dt-bindings: i2c: i2c-demux-pinctrl: Convert to json-schema
i2c: stm32f7: Use devm_clk_get_enabled()
i2c: stm32f4: Use devm_clk_get_enabled()
i2c: stm32f7: add description of atomic in struct stm32f7_i2c_dev
i2c: fix memleak in i2c_new_client_device()
i2c: exynos5: Calculate t_scl_l, t_scl_h according to i2c spec
i2c: i801: Simplify class-based client device instantiation
i2c: exynos5: add support for atomic transfers
i2c: at91-core: Use devm_clk_get_enabled()
eeprom: at24: add ST M24C64-D Additional Write lockable page support
...
|
|
Implements the I2C function of Intel USB-I2C/GPIO/SPI adapter device
named "La Jolla Cove Adapter" (LJCA). It communicate with LJCA I2C
module with specific protocol through interfaces exported by LJCA
USB driver.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Wolfram Sang <wsa@kernel.org>
Link: https://lore.kernel.org/r/1696833205-16716-3-git-send-email-wentong.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add SMBus PCI ID on Intel Birch Stream SoC.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The "i2c_mlxcpld" platform device is only instantiated on X86 systems
(through drivers/platform/x86/mlx-platform.c), or on ARM64 systems with
ACPI (through drivers/platform/mellanox/nvsw-sn2201.c). Hence further
restrict the dependency on ARM64 to ACPI, to prevent asking the user
about this driver when configuring an ARM64 kernel without ACPI support.
While at it, document in the Kconfig help text that the driver supports
ARM64/ACPI based systems, too.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Vadim Pasternak <vadimp@nvidia.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Extend driver dependency by ARM64 architecture.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Drop extra space from the I2C_RZV2M config help description.
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Add SMBus PCI ID on Intel Meteor Lake PCH-S.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Mostly fixes for DTs or DT handling this time. And a few driver
bugfixes"
* tag 'i2c-for-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (28 commits)
i2c: xiic: xiic_xfer(): Fix runtime PM leak on error path
i2c: cadence: cdns_i2c_master_xfer(): Fix runtime PM leak on error path
i2c: omap: Improve error reporting for problems during .remove()
i2c: cadence: Add reset controller support
dt-bindings: i2c: cadence: Document `resets` property
i2c: mediatek: add support for MT7981 SoC
dt-bindings: i2c: i2c-mt65xx: add MediaTek MT7981 SoC
dt-bindings: i2c: Drop unneeded quotes
i2c: brcmstb: use devm_platform_ioremap_resource_byname()
i2c: cadence: Detect maximum transfer size
i2c: cadence: Allow to specify the FIFO depth
dt-bindings: i2c: cadence: Document `fifo-depth` property
i2c: xiic: Use devm_platform_get_and_ioremap_resource()
i2c: mpc: Use i2c-scl-clk-low-timeout-us i2c property
i2c: mpc: Use of_property_read_u32 instead of of_get_property
dt-bindings: i2c: mpc: Mark "fsl,timeout" as deprecated
i2c: xiic: hide OF related data for COMPILE_TEST
i2c: synquacer: mark OF related data as maybe unused
dt-bindings: i2c: i2c-mt65xx: Add compatible for MT6795 Helio X10
i2c: imx: Simplify using devm_clk_get_enabled()
...
|
