| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Pull kvm fixes from Paolo Bonzini:
"Arm:
- Make sure we don't leak any S1POE state from guest to guest when
the feature is supported on the HW, but not enabled on the host
- Propagate the ID registers from the host into non-protected VMs
managed by pKVM, ensuring that the guest sees the intended feature
set
- Drop double kern_hyp_va() from unpin_host_sve_state(), which could
bite us if we were to change kern_hyp_va() to not being idempotent
- Don't leak stage-2 mappings in protected mode
- Correctly align the faulting address when dealing with single page
stage-2 mappings for PAGE_SIZE > 4kB
- Fix detection of virtualisation-capable GICv5 IRS, due to the
maintainer being obviously fat fingered... [his words, not mine]
- Remove duplication of code retrieving the ASID for the purpose of
S1 PT handling
- Fix slightly abusive const-ification in vgic_set_kvm_info()
Generic:
- Remove internal Kconfigs that are now set on all architectures
- Remove per-architecture code to enable KVM_CAP_SYNC_MMU, all
architectures finally enable it in Linux 7.0"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: always define KVM_CAP_SYNC_MMU
KVM: remove CONFIG_KVM_GENERIC_MMU_NOTIFIER
KVM: arm64: Deduplicate ASID retrieval code
irqchip/gic-v5: Fix inversion of IRS_IDR0.virt flag
KVM: arm64: Revert accidental drop of kvm_uninit_stage2_mmu() for non-NV VMs
KVM: arm64: Fix protected mode handling of pages larger than 4kB
KVM: arm64: vgic: Handle const qualifier from gic_kvm_info allocation type
KVM: arm64: Remove redundant kern_hyp_va() in unpin_host_sve_state()
KVM: arm64: Fix ID register initialization for non-protected pKVM guests
KVM: arm64: Optimise away S1POE handling when not supported by host
KVM: arm64: Hide S1POE from guests when not supported by the host
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irqchip driver fixes from Ingo Molnar:
- Fix frozen interrupt bug in the sifive-plic driver
- Limit per-device MSI interrupts on uncommon gic-v3-its hardware
variants
- Address Sparse warning by constifying a variable in the MMP driver
- Revert broken commit and also fix an error check in the ls-extirq
driver
* tag 'irq-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ls-extirq: Fix devm_of_iomap() error check
Revert "irqchip/ls-extirq: Use for_each_of_imap_item iterator"
irqchip/mmp: Make icu_irq_chip variable static const
irqchip/gic-v3-its: Limit number of per-device MSIs to the range the ITS supports
irqchip/sifive-plic: Fix frozen interrupt due to affinity setting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 7.0, take #1
- Make sure we don't leak any S1POE state from guest to guest when
the feature is supported on the HW, but not enabled on the host
- Propagate the ID registers from the host into non-protected VMs
managed by pKVM, ensuring that the guest sees the intended feature set
- Drop double kern_hyp_va() from unpin_host_sve_state(), which could
bite us if we were to change kern_hyp_va() to not being idempotent
- Don't leak stage-2 mappings in protected mode
- Correctly align the faulting address when dealing with single page
stage-2 mappings for PAGE_SIZE > 4kB
- Fix detection of virtualisation-capable GICv5 IRS, due to the
maintainer being obviously fat fingered...
- Remove duplication of code retrieving the ASID for the purpose of
S1 PT handling
- Fix slightly abusive const-ification in vgic_set_kvm_info()
|
|
It appears that a !! became ! during a cleanup, resulting in inverted
logic when detecting if a host GICv5 implementation is capable of
virtualization.
Re-add the missing !, fixing the behaviour.
Fixes: 3227c3a89d65f ("irqchip/gic-v5: Check if impl is virt capable")
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://patch.msgid.link/20260225083130.3378490-1-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The devm_of_iomap() function returns an ERR_PTR() encoded error code on
failure. Replace the incorrect check against NULL with IS_ERR().
Fixes: 05cd654829dd ("irqchip/ls-extirq: Convert to a platform driver to make it work again")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20260224113610.1129022-3-ioana.ciornei@nxp.com
Closes: https://lore.kernel.org/all/aYXvfbfT6w0TMsXS@stanley.mountain/
|
|
This reverts commit 3ac6dfe3d7a2396602b67667249b146504dfbd2a.
The ls-extirq uses interrupt-map but it's a non-standard use documented
in fsl,ls-extirq.yaml:
# The driver(drivers/irqchip/irq-ls-extirq.c) have not use standard DT
# function to parser interrupt-map. So it doesn't consider '#address-size'
# in parent interrupt controller, such as GIC.
#
# When dt-binding verify interrupt-map, item data matrix is spitted at
# incorrect position. Remove interrupt-map restriction because it always
# wrong.
This means that by using for_each_of_imap_item and the underlying
of_irq_parse_imap_parent() on its interrupt-map property will effectively
break its functionality
Revert the patch making use of for_each_of_imap_item() in ls-extirq.
Fixes: 3ac6dfe3d7a2 ("irqchip/ls-extirq: Use for_each_of_imap_item iterator")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20260224113610.1129022-2-ioana.ciornei@nxp.com
|
|
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
File-scope 'icu_irq_chip' is not used outside of this unit and is not
modified anywhere, so make it static const to silence sparse warning:
irq-mmp.c:139:17: warning: symbol 'icu_irq_chip' was not declared. Should it be static?
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260216110449.160277-2-krzysztof.kozlowski@oss.qualcomm.com
|
|
supports
The ITS driver blindly assumes that EventIDs are in abundant supply, to the
point where it never checks how many the hardware actually supports.
It turns out that some pretty esoteric integrations make it so that only a
few bits are available, all the way down to a single bit.
Enforce the advertised limitation at the point of allocating the device
structure, and hope that the endpoint driver can deal with such limitation.
Fixes: 84a6a2e7fc18d ("irqchip: GICv3: ITS: device allocation and configuration")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Zenghui Yu <zenghui.yu@linux.dev>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260206154816.3582887-1-maz@kernel.org
|
|
PLIC ignores interrupt completion message for disabled interrupt, explained
by the specification:
The PLIC signals it has completed executing an interrupt handler by
writing the interrupt ID it received from the claim to the
claim/complete register. The PLIC does not check whether the completion
ID is the same as the last claim ID for that target. If the completion
ID does not match an interrupt source that is currently enabled for
the target, the completion is silently ignored.
This caused problems in the past, because an interrupt can be disabled
while still being handled and plic_irq_eoi() had no effect. That was fixed
by checking if the interrupt is disabled, and if so enable it, before
sending the completion message. That check is done with irqd_irq_disabled().
However, that is not sufficient because the enable bit for the handling
hart can be zero despite irqd_irq_disabled(d) being false. This can happen
when affinity setting is changed while a hart is still handling the
interrupt.
This problem is easily reproducible by dumping a large file to uart (which
generates lots of interrupts) and at the same time keep changing the uart
interrupt's affinity setting. The uart port becomes frozen almost
instantaneously.
Fix this by checking PLIC's enable bit instead of irqd_irq_disabled().
Fixes: cc9f04f9a84f ("irqchip/sifive-plic: Implement irq_set_affinity() for SMP host")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260212114125.3148067-1-namcao@linutronix.de
|
|
Pull MIPS updates from Thomas Bogendoerfer:
"Cleanups and fixes"
* tag 'mips_7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (28 commits)
Revert "clk: microchip: core: allow driver to be compiled with COMPILE_TEST"
Revert "clk: microchip: fix typo in reference to a config option"
MIPS: Implement ARCH_HAS_CC_CAN_LINK
MIPS: rb532: Fix MMIO UART resource registration
MIPS: Work around LLVM bug when gp is used as global register variable
MIPS: Loongson64: env: Fixup serial clock-frequency when using LEFI
MIPS: Loongson2ef: Use pcibios_align_resource() to block io range
MIPS: Loongson2ef: Register PCI controller in early stage
clk: microchip: fix typo in reference to a config option
MIPS: Loongson64: dts: fix phy-related definition of LS7A GMAC
clk: microchip: core: allow driver to be compiled with COMPILE_TEST
MIPS: drop unused pic32.h header
watchdog: pic32-wdt: update include to use pic32.h from platform_data
watchdog: pic32-dmt: update include to use pic32.h from platform_data
serial: pic32_uart: update include to use pic32.h from platform_data
rtc: pic32: update include to use pic32.h from platform_data
pinctrl: pic32: update include to use pic32.h from platform_data
mmc: sdhci-pic32: update include to use pic32.h from platform_data
irqchip/irq-pic32-evic: update include to use pic32.h from platform_data
clk: microchip: core: update include to use pic32.h from platform_data
...
|
|
Pull KVM updates from Paolo Bonzini:
"Loongarch:
- Add more CPUCFG mask bits
- Improve feature detection
- Add lazy load support for FPU and binary translation (LBT) register
state
- Fix return value for memory reads from and writes to in-kernel
devices
- Add support for detecting preemption from within a guest
- Add KVM steal time test case to tools/selftests
ARM:
- Add support for FEAT_IDST, allowing ID registers that are not
implemented to be reported as a normal trap rather than as an UNDEF
exception
- Add sanitisation of the VTCR_EL2 register, fixing a number of
UXN/PXN/XN bugs in the process
- Full handling of RESx bits, instead of only RES0, and resulting in
SCTLR_EL2 being added to the list of sanitised registers
- More pKVM fixes for features that are not supposed to be exposed to
guests
- Make sure that MTE being disabled on the pKVM host doesn't give it
the ability to attack the hypervisor
- Allow pKVM's host stage-2 mappings to use the Force Write Back
version of the memory attributes by using the "pass-through'
encoding
- Fix trapping of ICC_DIR_EL1 on GICv5 hosts emulating GICv3 for the
guest
- Preliminary work for guest GICv5 support
- A bunch of debugfs fixes, removing pointless custom iterators
stored in guest data structures
- A small set of FPSIMD cleanups
- Selftest fixes addressing the incorrect alignment of page
allocation
- Other assorted low-impact fixes and spelling fixes
RISC-V:
- Fixes for issues discoverd by KVM API fuzzing in
kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(), and
kvm_riscv_vcpu_aia_imsic_update()
- Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM
- Transparent huge page support for hypervisor page tables
- Adjust the number of available guest irq files based on MMIO
register sizes found in the device tree or the ACPI tables
- Add RISC-V specific paging modes to KVM selftests
- Detect paging mode at runtime for selftests
s390:
- Performance improvement for vSIE (aka nested virtualization)
- Completely new memory management. s390 was a special snowflake that
enlisted help from the architecture's page table management to
build hypervisor page tables, in particular enabling sharing the
last level of page tables. This however was a lot of code (~3K
lines) in order to support KVM, and also blocked several features.
The biggest advantages is that the page size of userspace is
completely independent of the page size used by the guest:
userspace can mix normal pages, THPs and hugetlbfs as it sees fit,
and in fact transparent hugepages were not possible before. It's
also now possible to have nested guests and guests with huge pages
running on the same host
- Maintainership change for s390 vfio-pci
- Small quality of life improvement for protected guests
x86:
- Add support for giving the guest full ownership of PMU hardware
(contexted switched around the fastpath run loop) and allowing
direct access to data MSRs and PMCs (restricted by the vPMU model).
KVM still intercepts access to control registers, e.g. to enforce
event filtering and to prevent the guest from profiling sensitive
host state. This is more accurate, since it has no risk of
contention and thus dropped events, and also has significantly less
overhead.
For more information, see the commit message for merge commit
bf2c3138ae36 ("Merge tag 'kvm-x86-pmu-6.20' ...")
- Disallow changing the virtual CPU model if L2 is active, for all
the same reasons KVM disallows change the model after the first
KVM_RUN
- Fix a bug where KVM would incorrectly reject host accesses to PV
MSRs when running with KVM_CAP_ENFORCE_PV_FEATURE_CPUID enabled,
even if those were advertised as supported to userspace,
- Fix a bug with protected guest state (SEV-ES/SNP and TDX) VMs,
where KVM would attempt to read CR3 configuring an async #PF entry
- Fail the build if EXPORT_SYMBOL_GPL or EXPORT_SYMBOL is used in KVM
(for x86 only) to enforce usage of EXPORT_SYMBOL_FOR_KVM_INTERNAL.
Only a few exports that are intended for external usage, and those
are allowed explicitly
- When checking nested events after a vCPU is unblocked, ignore
-EBUSY instead of WARNing. Userspace can sometimes put the vCPU
into what should be an impossible state, and spurious exit to
userspace on -EBUSY does not really do anything to solve the issue
- Also throw in the towel and drop the WARN on INIT/SIPI being
blocked when vCPU is in Wait-For-SIPI, which also resulted in
playing whack-a-mole with syzkaller stuffing architecturally
impossible states into KVM
- Add support for new Intel instructions that don't require anything
beyond enumerating feature flags to userspace
- Grab SRCU when reading PDPTRs in KVM_GET_SREGS2
- Add WARNs to guard against modifying KVM's CPU caps outside of the
intended setup flow, as nested VMX in particular is sensitive to
unexpected changes in KVM's golden configuration
- Add a quirk to allow userspace to opt-in to actually suppress EOI
broadcasts when the suppression feature is enabled by the guest
(currently limited to split IRQCHIP, i.e. userspace I/O APIC).
Sadly, simply fixing KVM to honor Suppress EOI Broadcasts isn't an
option as some userspaces have come to rely on KVM's buggy behavior
(KVM advertises Supress EOI Broadcast irrespective of whether or
not userspace I/O APIC supports Directed EOIs)
- Clean up KVM's handling of marking mapped vCPU pages dirty
- Drop a pile of *ancient* sanity checks hidden behind in KVM's
unused ASSERT() macro, most of which could be trivially triggered
by the guest and/or user, and all of which were useless
- Fold "struct dest_map" into its sole user, "struct rtc_status", to
make it more obvious what the weird parameter is used for, and to
allow fropping these RTC shenanigans if CONFIG_KVM_IOAPIC=n
- Bury all of ioapic.h, i8254.h and related ioctls (including
KVM_CREATE_IRQCHIP) behind CONFIG_KVM_IOAPIC=y
- Add a regression test for recent APICv update fixes
- Handle "hardware APIC ISR", a.k.a. SVI, updates in
kvm_apic_update_apicv() to consolidate the updates, and to
co-locate SVI updates with the updates for KVM's own cache of ISR
information
- Drop a dead function declaration
- Minor cleanups
x86 (Intel):
- Rework KVM's handling of VMCS updates while L2 is active to
temporarily switch to vmcs01 instead of deferring the update until
the next nested VM-Exit.
The deferred updates approach directly contributed to several bugs,
was proving to be a maintenance burden due to the difficulty in
auditing the correctness of deferred updates, and was polluting
"struct nested_vmx" with a growing pile of booleans
- Fix an SGX bug where KVM would incorrectly try to handle EPCM page
faults, and instead always reflect them into the guest. Since KVM
doesn't shadow EPCM entries, EPCM violations cannot be due to KVM
interference and can't be resolved by KVM
- Fix a bug where KVM would register its posted interrupt wakeup
handler even if loading kvm-intel.ko ultimately failed
- Disallow access to vmcb12 fields that aren't fully supported,
mostly to avoid weirdness and complexity for FRED and other
features, where KVM wants enable VMCS shadowing for fields that
conditionally exist
- Print out the "bad" offsets and values if kvm-intel.ko refuses to
load (or refuses to online a CPU) due to a VMCS config mismatch
x86 (AMD):
- Drop a user-triggerable WARN on nested_svm_load_cr3() failure
- Add support for virtualizing ERAPS. Note, correct virtualization of
ERAPS relies on an upcoming, publicly announced change in the APM
to reduce the set of conditions where hardware (i.e. KVM) *must*
flush the RAP
- Ignore nSVM intercepts for instructions that are not supported
according to L1's virtual CPU model
- Add support for expedited writes to the fast MMIO bus, a la VMX's
fastpath for EPT Misconfig
- Don't set GIF when clearing EFER.SVME, as GIF exists independently
of SVM, and allow userspace to restore nested state with GIF=0
- Treat exit_code as an unsigned 64-bit value through all of KVM
- Add support for fetching SNP certificates from userspace
- Fix a bug where KVM would use vmcb02 instead of vmcb01 when
emulating VMLOAD or VMSAVE on behalf of L2
- Misc fixes and cleanups
x86 selftests:
- Add a regression test for TPR<=>CR8 synchronization and IRQ masking
- Overhaul selftest's MMU infrastructure to genericize stage-2 MMU
support, and extend x86's infrastructure to support EPT and NPT
(for L2 guests)
- Extend several nested VMX tests to also cover nested SVM
- Add a selftest for nested VMLOAD/VMSAVE
- Rework the nested dirty log test, originally added as a regression
test for PML where KVM logged L2 GPAs instead of L1 GPAs, to
improve test coverage and to hopefully make the test easier to
understand and maintain
guest_memfd:
- Remove kvm_gmem_populate()'s preparation tracking and half-baked
hugepage handling. SEV/SNP was the only user of the tracking and it
can do it via the RMP
- Retroactively document and enforce (for SNP) that
KVM_SEV_SNP_LAUNCH_UPDATE and KVM_TDX_INIT_MEM_REGION require the
source page to be 4KiB aligned, to avoid non-trivial complexity for
something that no known VMM seems to be doing and to avoid an API
special case for in-place conversion, which simply can't support
unaligned sources
- When populating guest_memfd memory, GUP the source page in common
code and pass the refcounted page to the vendor callback, instead
of letting vendor code do the heavy lifting. Doing so avoids a
looming deadlock bug with in-place due an AB-BA conflict betwee
mmap_lock and guest_memfd's filemap invalidate lock
Generic:
- Fix a bug where KVM would ignore the vCPU's selected address space
when creating a vCPU-specific mapping of guest memory. Actually
this bug could not be hit even on x86, the only architecture with
multiple address spaces, but it's a bug nevertheless"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (267 commits)
KVM: s390: Increase permitted SE header size to 1 MiB
MAINTAINERS: Replace backup for s390 vfio-pci
KVM: s390: vsie: Fix race in acquire_gmap_shadow()
KVM: s390: vsie: Fix race in walk_guest_tables()
KVM: s390: Use guest address to mark guest page dirty
irqchip/riscv-imsic: Adjust the number of available guest irq files
RISC-V: KVM: Transparent huge page support
RISC-V: KVM: selftests: Add Zalasr extensions to get-reg-list test
RISC-V: KVM: Allow Zalasr extensions for Guest/VM
KVM: riscv: selftests: Add riscv vm satp modes
KVM: riscv: selftests: add Zilsd and Zclsd extension to get-reg-list test
riscv: KVM: allow Zilsd and Zclsd extensions for Guest/VM
RISC-V: KVM: Skip IMSIC update if vCPU IMSIC state is not initialized
RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_rw_attr()
RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_has_attr()
RISC-V: KVM: Remove unnecessary 'ret' assignment
KVM: s390: Add explicit padding to struct kvm_s390_keyop
KVM: LoongArch: selftests: Add steal time test case
LoongArch: KVM: Add paravirt vcpu_is_preempted() support in guest side
LoongArch: KVM: Add paravirt preempt feature in hypervisor side
...
|
|
Pull OpenRISC updates from Stafford Horne:
"The main focus for this series has been to improve OpenRISC kernel
out-of-the-box support for FPGA dev boards.
- Add device tree configurations for De0 Nano single and multicore
configurations
- Fix bug in OpenRISC SMP preventing the kernel from running on FPGA
boards, due to IPIs not being unmasked on secondary CPUs in some
configurations
- Pick up a fix from Brian Masney defining the nop() macro to fix
build failures on OpenRISC for drivers using it"
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: define arch-specific version of nop()
openrisc: dts: Add de0 nano multicore config and devicetree
openrisc: dts: Split simple smp dts to dts and dtsi
openrisc: Fix IPIs on simple multicore systems
openrisc: dts: Add de0 nano config and devicetree
|
|
KVM/riscv changes for 6.20
- Fixes for issues discoverd by KVM API fuzzing in
kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(),
and kvm_riscv_vcpu_aia_imsic_update()
- Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM
- Add riscv vm satp modes in KVM selftests
- Transparent huge page support for G-stage
- Adjust the number of available guest irq files based on
MMIO register sizes in DeviceTree or ACPI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are are a number of to firmware drivers, in particular the TEE
subsystem:
- a bus callback for TEE firmware that device drivers can register to
- sysfs support for tee firmware information
- minor updates to platform specific TEE drivers for AMD, NXP,
Qualcomm and the generic optee driver
- ARM SCMI firmware refactoring to improve the protocol discover
among other fixes and cleanups
- ARM FF-A firmware interoperability improvements
The reset controller and memory controller subsystems gain support for
additional hardware platforms from Mediatek, Renesas, NXP, Canaan and
SpacemiT.
Most of the other changes are for random drivers/soc code. Among a
number of cleanups and newly added hardware support, including:
- Mediatek MT8196 DVFS power management and mailbox support
- Qualcomm SCM firmware and MDT loader refactoring, as part of the
new Glymur platform support.
- NXP i.MX9 System Manager firmware support for accessing the syslog
- Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD
SoCs"
* tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (171 commits)
bus: fsl-mc: fix an error handling in fsl_mc_device_add()
reset: spacemit: Add SpacemiT K3 reset driver
reset: spacemit: Extract common K1 reset code
reset: Create subdirectory for SpacemiT drivers
dt-bindings: soc: spacemit: Add K3 reset support and IDs
reset: canaan: k230: drop OF dependency and enable by default
reset: rzg2l-usbphy-ctrl: Add suspend/resume support
reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits()
reset: gpio: check the return value of gpiod_set_value_cansleep()
reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV
reset: imx8mp-audiomix: Extend the driver usage
reset: imx8mp-audiomix: Switch to using regmap API
reset: imx8mp-audiomix: Drop unneeded macros
soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove
soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses
soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID
soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support
soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create()
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq chip driver updates from Thomas Gleixner:
- Add support for the Renesas RZ/V2N SoC
- Add a new driver for the Renesas RZ/[TN]2H SoCs
- Preserve the register state of the RISCV APLIC interrupt controller
accross suspend/resume
- Reinitialize the RISCV IMSIC registers after suspend/resume
- Make the various Loongson interrupt chip drivers 32/64-bit aware
- Handle the number of hardware interrupts in the SIFIVE PLIC driver
correctly
The hardware interrupt 0 is reserved which resulted in inconsistent
accounting. That went unnoticed as the off by one is only noticable
when the number of device interrupts is a multiple of 32
- The usual device tree updates, cleanups and improvements all over the
place
* tag 'irq-drivers-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
irqchip/gic-v5: Fix spelling mistake "ouside" -> "outside"
dt-bindings: interrupt-controller: sifive,plic: Clarify the riscv,ndev meaning in PLIC
irqchip/sifive-plic: Handle number of hardware interrupts correctly
irqchip/aspeed-scu-ic: Remove unused variable mask
irqchip/ti-sci-intr: Allow parsing interrupt-types per-line
dt-bindings: interrupt-controller: ti,sci-intr: Per-line interrupt-types
irqchip/renesas-rzv2h: Add suspend/resume support
irqchip/aslint-sswi: Fix error check of of_io_request_and_map() result
irqchip: Allow LoongArch irqchip drivers on both 32BIT/64BIT
irqchip/loongson-pch-pic: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-pch-msi: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-htvec: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-eiointc: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-liointc: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongarch-avec: Adjust irqchip driver for 32BIT/64BIT
irqchip/riscv-aplic: Preserve APLIC states across suspend/resume
irqchip/riscv-imsic: Add a CPU pm notifier to restore the IMSIC on exit
arm64: dts: renesas: r9a09g087: Add ICU support
arm64: dts: renesas: r9a09g077: Add ICU support
irqchip: Add RZ/{T2H,N2H} Interrupt Controller (ICU) driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"This one is significantly larger than previous ACPI support pull
requests because several significant updates have coincided in it.
First, there is a routine ACPICA code update, to upstream version
20251212, but this time it covers new ACPI 6.6 material that has not
been covered yet. Among other things, it includes definitions of a few
new ACPI tables and updates of some others, like the GICv5 MADT
structures and ARM IORT IWB node definitions that are used for adding
GICv5 ACPI probing on ARM (that technically is IRQ subsystem material,
but it depends on the ACPICA changes, so it is included here). The
latter alone adds a few hundred lines of new code.
Second, there is an update of ACPI _OSC handling including a fix that
prevents failures from occurring in some corner cases due to careless
handling of _OSC error bits.
On top of that, the "system resource" ACPI device objects with the
PNP0C01 and PNP0C02 are now going to be handled by the ACPI core
device enumeration code instead of handing them over to the legacy PNP
system driver which causes device enumeration issues to occur. Some of
those issues have been worked around in device drivers and elsewhere
and those workarounds should not be necessary any more, so they are
going away.
Moreover, the time has come to convert all "core ACPI" device drivers
that were still using struct acpi_driver objects for device binding
into proper platform drivers that use struct platform_driver for this
purpose. These updates are accompanied by some requisite core ACPI
device enumeration code changes.
Next, there are ACPI APEI updates, including changes to avoid excess
overhead in the NMI handler and in SEA on the ARM side, changes to
unify ACPI-based HW error tracing and logging, and changes to prevent
APEI code from reaching out of its allocated memory.
There are also some ACPI power management updates, mostly related to
the ACPI cpuidle support in the processor driver, suspend-to-idle
handling on systems with ACPI support and to ACPI PM of devices.
In addition to the above, bugs are fixed and the code is cleaned up in
assorted places all over.
Specifics:
- Update the ACPICA code in the kernel to upstream version 20251212
which includes the following changes:
* Add support for new ACPI table DTPR (Michal Camacho Romero)
* Release objects with acpi_ut_delete_object_desc() (Zilin Guan)
* Add UUIDs for Microsoft fan extensions and UUIDs associated with
TPM 2.0 devices (Armin Wolf)
* Fix NULL pointer dereference in acpi_ev_address_space_dispatch()
(Alexey Simakov)
* Add KEYP ACPI table definition (Dave Jiang)
* Add support for the Microsoft display mux _OSI string (Armin
Wolf)
* Add definitions for the IOVT ACPI table (Xianglai Li)
* Abort AML bytecode execution on AML_FATAL_OP (Armin Wolf)
* Include all fields in subtable type1 for PPTT (Ben Horgan)
* Add GICv5 MADT structures and Arm IORT IWB node definitions
(Jose Marinho)
* Update Parameter Block structure for RAS2 and add a new flag in
Memory Affinity Structure for SRAT (Pawel Chmielewski)
* Add _VDM (Voltage Domain) object (Pawel Chmielewski)
- Add support for GICv5 ACPI probing on ARM which is based on the
GICv5 MADT structures and ARM IORT IWB node definitions recently
added to ACPICA (Lorenzo Pieralisi)
- Rework ACPI PM notification setup for PCI root buses and modify the
ACPI PM setup for devices to register wakeup source objects under
physical (that is, PCI, platform, etc.) devices instead of doing
that under their ACPI companions (Rafael Wysocki)
- Adjust debug messages regarding postponed ACPI PM printed during
system resume to be more accurate (Rafael Wysocki)
- Remove dead code from lps0_device_attach() (Gergo Koteles)
- Start to invoke Microsoft Function 9 (Turn On Display) of the Low-
Power S0 Idle (LPS0) _DSM in the suspend-to-idle resume flow on
systems with ACPI LPS0 support to address a functional issue on
Lenovo Yoga Slim 7i Aura (15ILL9), where system fans and keyboard
backlights fail to resume after suspend (Jakob Riemenschneider)
- Add sysfs attribute cid for exposing _CID lists under ACPI device
objects (Rafael Wysocki)
- Replace sprintf() with sysfs_emit() in all of the core ACPI sysfs
interface code (Sumeet Pawnikar)
- Use acpi_get_local_u64_address() in the code implementing ACPI
support for PCI to evaluate _ADR instead of evaluating that object
directly (Andy Shevchenko)
- Add JWIPC JVC9100 to irq1_level_low_skip_override[] to unbreak
serial IRQs on that system (Ai Chao)
- Fix handling of _OSC errors in acpi_run_osc() to avoid failures on
systems where _OSC error bits are set even though the _OSC return
buffer contains acknowledged feature bits (Rafael Wysocki)
- Clean up and rearrange \_SB._OSC handling for general platform
features and USB4 features to avoid code duplication and
unnecessary memory management overhead (Rafael Wysocki)
- Make the ACPI core device enumeration code handle PNP0C01 and
PNP0C02 ("system resource") device objects directly instead of
letting the legacy PNP system driver handle them to avoid device
enumeration issues on systems where PNP0C02 is present in the _CID
list under ACPI device objects with a _HID matching a proper device
driver in Linux (Rafael Wysocki)
- Drop workarounds for the known device enumeration issues related to
_CID lists containing PNP0C02 (Rafael Wysocki)
- Drop outdated comment regarding removed function in the ACPI-based
device enumeration code (Julia Lawall)
- Make PRP0001 device matching work as expected for ACPI device
objects using it as a _HID for board development and similar
purposes (Kartik Rajput)
- Use async schedule function in acpi_scan_clear_dep_fn() to avoid
races with user space initialization on some systems (Yicong Yang)
- Add a piece of documentation explaining why binding drivers
directly to ACPI device objects is not a good idea in general and
why it is desirable to convert drivers doing so into proper
platform drivers that use struct platform_driver for device binding
(Rafael Wysocki)
- Convert multiple "core ACPI" drivers, including the NFIT ACPI
device driver, the generic ACPI button drivers, the generic ACPI
thermal zone driver, the ACPI hardware event device (HED) driver,
the ACPI EC driver, the ACPI SMBUS HC driver, the ACPI Smart
Battery Subsystem (SBS) driver, and the ACPI backlight (video)
driver to proper platform drivers that use struct platform_driver
for device binding (Rafael Wysocki)
- Use acpi_get_local_u64_address() in the ACPI backlight (video)
driver to evaluate _ADR instead of evaluating that object directly
(Andy Shevchenko)
- Convert the generic ACPI battery driver to a proper platform driver
using struct platform_driver for device binding (Rafael Wysocki)
- Fix incorrect charging status when current is zero in the generic
ACPI battery driver (Ata İlhan Köktürk)
- Use LIST_HEAD() for initializing a stack-allocated list in the
generic ACPI watchdog device driver (Can Peng)
- Rework the ACPI idle driver initialization to register it directly
from the common initialization code instead of doing that from a
CPU hotplug "online" callback and clean it up (Huisong Li, Rafael
Wysocki)
- Fix a possible NULL pointer dereference in
acpi_processor_errata_piix4() (Tuo Li)
- Make read-only array non_mmio_desc[] static const (Colin Ian King)
- Prevent the APEI GHES support code on ARM from accessing memory out
of bounds or going past the ARM processor CPER record buffer (Mauro
Carvalho Chehab)
- Prevent cper_print_fw_err() from dumping the entire memory on
systems with defective firmware (Mauro Carvalho Chehab)
- Improve ghes_notify_nmi() status check to avoid unnecessary
overhead in the NMI handler by carrying out all of the requisite
preparations and the NMI registration time (Tony Luck)
- Refactor the GHES driver by extracting common functionality into
reusable helper functions to reduce code duplication and improve
the ghes_notify_sea() status check in analogy with the previous
ghes_notify_nmi() status check improvement (Shuai Xue)
- Make ELOG and GHES log and trace consistently and support the CPER
CXL protocol analogously (Fabio De Francesco)
- Disable KASAN instrumentation in the APEI GHES driver when compile
testing with clang < 18 (Nathan Chancellor)
- Let ghes_edac be the preferred driver to load on __ZX__ and _BYO_
systems by extending the platform detection list in the APEI GHES
driver (Tony W Wang-oc)
- Clean up cppc_perf_caps and cppc_perf_ctrls structs and rename EPP
constants for clarity in the ACPI CPPC library (Sumit Gupta)"
* tag 'acpi-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (117 commits)
ACPI: battery: fix incorrect charging status when current is zero
ACPI: scan: Use async schedule function in acpi_scan_clear_dep_fn()
ACPI: x86: s2idle: Invoke Microsoft _DSM Function 9 (Turn On Display)
ACPI: APEI: GHES: Add ghes_edac support for __ZX__ and _BYO_ systems
ACPI: APEI: GHES: Disable KASAN instrumentation when compile testing with clang < 18
ACPI: sysfs: Replace sprintf() with sysfs_emit()
ACPI: CPPC: Rename EPP constants for clarity
ACPI: CPPC: Clean up cppc_perf_caps and cppc_perf_ctrls structs
ACPI: processor: idle: Rework the handling of acpi_processor_ffh_lpi_probe()
ACPI: processor: idle: Convert acpi_processor_setup_cpuidle_dev() to void
ACPI: processor: idle: Convert acpi_processor_setup_cpuidle_states() to void
irqchip/gic-v5: Add ACPI IWB probing
irqchip/gic-v5: Add ACPI ITS probing
irqchip/gic-v5: Add ACPI IRS probing
irqchip/gic-v5: Split IRS probing into OF and generic portions
PCI/MSI: Make the pci_msi_map_rid_ctlr_node() interface firmware agnostic
irqdomain: Add parent field to struct irqchip_fwid
ACPI: PCI: simplify code with acpi_get_local_u64_address()
ACPI: video: simplify code with acpi_get_local_u64_address()
ACPI: PM: Adjust messages regarding postponed ACPI PM
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 7.0
- Add support for FEAT_IDST, allowing ID registers that are not
implemented to be reported as a normal trap rather than as an UNDEF
exception.
- Add sanitisation of the VTCR_EL2 register, fixing a number of
UXN/PXN/XN bugs in the process.
- Full handling of RESx bits, instead of only RES0, and resulting in
SCTLR_EL2 being added to the list of sanitised registers.
- More pKVM fixes for features that are not supposed to be exposed to
guests.
- Make sure that MTE being disabled on the pKVM host doesn't give it
the ability to attack the hypervisor.
- Allow pKVM's host stage-2 mappings to use the Force Write Back
version of the memory attributes by using the "pass-through'
encoding.
- Fix trapping of ICC_DIR_EL1 on GICv5 hosts emulating GICv3 for the
guest.
- Preliminary work for guest GICv5 support.
- A bunch of debugfs fixes, removing pointless custom iterators stored
in guest data structures.
- A small set of FPSIMD cleanups.
- Selftest fixes addressing the incorrect alignment of page
allocation.
- Other assorted low-impact fixes and spelling fixes.
|
|
Currently, KVM assumes the minimum of implemented HGEIE bits and
"BIT(gc->guest_index_bits) - 1" as the number of guest files available
across all CPUs. This will not work when CPUs have different number
of guest files because KVM may incorrectly allocate a guest file on a
CPU with fewer guest files.
To address above, during initialization, calculate the number of
available guest interrupt files according to MMIO resources and
constrain the number of guest interrupt files that can be allocated
by KVM.
Signed-off-by: Xu Lu <luxu.kernel@bytedance.com>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://lore.kernel.org/r/20260104133457.57742-1-luxu.kernel@bytedance.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
There is a spelling mistake in a pr_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://patch.msgid.link/20260203210735.5036-1-colin.i.king@gmail.com
|
|
The driver is handling the number of hardware interrupts inconsistently.
The reason is that the firmware enumerates the maximum number of device
interrupts, but the actual number of hardware interrupts is one more
because hardware interrupt 0 is reserved.
There are two loop variants where this matters:
1) Iterating over the device interrupts
for (irq = 1; irq < total_irqs; irq++)
2) Iterating over the number of interrupt register groups
for (grp = 0; grp < irq_groups; grp++)
The current code stores the number of device interrupts and that requires
to write the loops as:
1) for (irq = 1; irq <= device_irqs; irq++)
2) for (grp = 0; grp < DIV_ROUND_UP(device_irqs + 1); grp++)
But the code gets it wrong all over the place. Just fixing up the
conditions and off by ones is not a sustainable solution as the next changes
will reintroduce the same bugs over and over.
Sanitize it by storing the total number of hardware interrupts during probe
and precalculating the number of groups. To future proof it mark
priv::total_irqs __private, provide a correct iterator macro and adjust the
code to this.
Marking it private allows sparse (C=1 build) to catch direct access to this
member:
drivers/irqchip/irq-sifive-plic.c:270:9: warning: dereference of noderef expression
That should prevent at least the most obvious future damage in that area.
Fixes: e80f0b6a2cf3 ("irqchip/irq-sifive-plic: Add syscore callbacks for hibernation")
Reported-by: Yangyu Chen <cyy@cyyself.name>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Yangyu Chen <cyy@cyyself.name>
Link: https://patch.msgid.link/87ikcd36i9.ffs@tglx
|
|
The kernel test robot reports:
drivers/irqchip/irq-aspeed-scu-ic.c:107:27: warning: variable 'mask' set but not used
107 | unsigned int sts, mask;
Remove the leftover.
Fixes: b2a0c13f8b4f ("irqchip/aspeed-scu-ic: Add support for AST2700 SCU interrupt controllers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/874io0h3sz.ffs@tglx
Closes: https://lore.kernel.org/oe-kbuild-all/202602010957.9uuKqUkG-lkp@intel.com/
|
|
Use the linux/platform_data/pic32.h include instead of
asm/mach-pic32/pic32.h so that the asm variant can be dropped. This
is in preparation for allowing some drivers to be compiled on other
architectures with COMPILE_TEST enabled.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Now that there is support for creating a GICv5-based guest with KVM,
check that the hardware itself supports virtualisation, skipping the
setting of struct gic_kvm_info if not.
Note: If native GICv5 virt is not supported, then nor is
FEAT_GCIE_LEGACY, so we are able to skip altogether.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260128175919.3828384-33-sascha.bischoff@arm.com
[maz: cosmetic changes]
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Starting with the blamed commit, the ls-extirq driver stopped working. This
is because ls-extirq, being one of the interrupt-map property abusers, does
not pass the DT checks added by the referenced commit, making it unable to
determine its interrupt parent:
irq-ls-extirq: Cannot find parent domain
OF: of_irq_init: Failed to init /soc/syscon@1f70000/interrupt-controller@14
((____ptrval____)), parent 0000000000000000
Instead of reverting the referenced commit, convert the ls-extirq to a
platform driver to avoid the irqchip_init() -> of_irq_init() code path
completely.
As part of the conversion, use the managed resources APIs and
dev_err_probe() so that there is no need for a .remove() callback or for
complicated error handling.
Fixes: 1b1f04d8271e ("of/irq: Ignore interrupt parent for nodes without interrupts")
Co-developed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260122134034.3274053-2-ioana.ciornei@nxp.com
|
|
To probe an IWB in an ACPI based system it is required:
- to implement the IORT functions handling the IWB IORT node and create
functions to retrieve IWB firmware information
- to augment the driver to match the DSDT ACPI "ARMH0003" device and
retrieve the IWB wire and trigger mask from the GSI interrupt descriptor
in the IWB msi_domain_ops.msi_translate() function
Make the required driver changes to enable IWB probing in ACPI systems.
The GICv5 GSI format requires special handling for IWB routed IRQs.
Add IWB GSI detection to the top level driver gic_v5_get_gsi_domain_id()
function so that the correct IRQ domain for a GSI can be detected by
parsing the GSI and check whether it is an IWB-backed IRQ or not.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260115-gicv5-host-acpi-v3-6-c13a9a150388@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On ACPI ARM64 systems the GICv5 ITS configuration and translate frames
are described in the MADT table.
Refactor the current GICv5 ITS driver code to share common functions
between ACPI and OF and implement ACPI probing in the GICv5 ITS driver.
Add iort_msi_xlate() to map a device ID and retrieve an MSI controller
fwnode node for ACPI systems and update pci_msi_map_rid_ctlr_node() to
use it in its ACPI code path.
Add the required functions to IORT code for deviceID retrieval and IRQ
domain registration and look-up so that the GICv5 ITS driver in an
ACPI based system can be successfully probed.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260115-gicv5-host-acpi-v3-5-c13a9a150388@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On ARM64 ACPI systems GICv5 IRSes are described in MADT sub-entries.
Add the required plumbing to parse MADT IRS firmware table entries and
probe the IRS components in ACPI.
Augment the irqdomain_ops.translate() for PPI and SPI IRQs in order to
provide support for their ACPI based firmware translation.
Implement an irqchip ACPI based callback to initialize the global GSI
domain upon an MADT IRS detection.
The IRQCHIP_ACPI_DECLARE() entry in the top level GICv5 driver is only used
to trigger the IRS probing (ie the global GSI domain is initialized once on
the first call on multi-IRS systems); IRS probing takes place by calling
acpi_table_parse_madt() in the IRS sub-driver, that probes all IRSes
in sequence.
Add a new ACPI interrupt model so that it can be detected at runtime and
distinguished from previous GIC architecture models.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260115-gicv5-host-acpi-v3-4-c13a9a150388@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Split the IRS driver code into OF specific and generic portions in order
to pave the way for adding ACPI firmware bindings support.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260115-gicv5-host-acpi-v3-3-c13a9a150388@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
To support booting with OF and ACPI seamlessly, GIC ITS parent code
requires the PCI/MSI irqdomain layer to implement a function to retrieve
an MSI controller fwnode and map an RID in a firmware agnostic way
(ie pci_msi_map_rid_ctlr_node()).
Convert pci_msi_map_rid_ctlr_node() to an OF agnostic interface
(fwnode_handle based) and update the GIC ITS MSI parent code to reflect
the pci_msi_map_rid_ctlr_node() change.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260115-gicv5-host-acpi-v3-2-c13a9a150388@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Some INTR router instances act as simple passthroughs that preserve the
source interrupt type unchanged at the output line, rather than
converting all interrupts to a fixed type.
When interrupt sources are not homogeneous with respect to trigger type,
the driver needs to read each source's interrupt type from DT and pass
it unchanged to its interrupt parent.
Add support to check for absence of "ti,intr-trigger-type" to indicate
passthrough mode. When this property is absent, parse interrupt type
per-line from the DT fwspec provided by the interrupt source. Else, use
the global setting for all interrupt lines.
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260123-ul-driver-i2c-j722s-v4-2-b08625c487d5@ti.com
|
|
On 32-bit machines with CONFIG_ARM_LPAE, it is possible for lowmem
allocations to be backed by addresses physical memory above the 32-bit
address limit, as found while experimenting with larger VMSPLIT
configurations.
This caused the qemu virt model to crash in the GICv3 driver, which
allocates the 'itt' object using GFP_KERNEL. Since all memory below
the 4GB physical address limit is in ZONE_DMA in this configuration,
kmalloc() defaults to higher addresses for ZONE_NORMAL, and the
ITS driver stores the physical address in a 32-bit 'unsigned long'
variable.
Change the itt_addr variable to the correct phys_addr_t type instead,
along with all other variables in this driver that hold a physical
address.
The gicv5 driver correctly uses u64 variables, while all other irqchip
drivers don't call virt_to_phys or similar interfaces. It's expected that
other device drivers have similar issues, but fixing this one is
sufficient for booting a virtio based guest.
Fixes: cc2d3216f53c ("irqchip: GICv3: ITS command queue")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260119201603.2713066-1-arnd@kernel.org
|
|
On RZ/G3E using PSCI, s2ram powers down the SoC. Add suspend/resume
callbacks to restore IRQ type for NMI, TINT and external IRQ interrupts.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260113125315.359967-3-biju.das.jz@bp.renesas.com
|
|
of_io_request_and_map() returns IOMEM_ERR_PTR() on failure which is
non-NULL.
Fixes: 8a7f030df897 ("irqchip/aslint-sswi: Request IO memory resource")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260118082843.2786630-1-vladimir.kondratiev@mobileye.com
Closes: https://lore.kernel.org/all/20260116124257.78357-1-clm@meta.com
|
|
All LoongArch irqchip drivers are adjusted, allow them to be built on both
32BIT and 64BIT platforms.
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260113085940.3344837-8-chenhuacai@loongson.cn
|
|
irq_domain_alloc_fwnode() takes a parameter with the phys_addr_t type.
Currently we pass acpi_pchpic->address to it. This can only work on
64BIT platform because its type is u64, so cast it to phys_addr_t and
then the driver works on both 32BIT and 64BIT platforms.
Also use readl() to read vec_count because readq() is only available on
64BIT platform.
[ tglx: Make the cast explicit and use the casted address as argument for
pch_pic_init() which takes a phys_addr_t as well. Fixup coding
style. More sigh... ]
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260113085940.3344837-7-chenhuacai@loongson.cn
|
|
irq_domain_alloc_fwnode() takes a parameter with the phys_addr_t type.
Currently the code passe acpi_pchmsi->msg_address to it.
This can only work on 64BIT platform because its type is u64, so cast it to
phys_addr_t and then the driver works on both 32BIT and 64BIT platform.
[ tglx: Make the cast explicit and fixup coding style. ]
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260113085940.3344837-6-chenhuacai@loongson.cn
|
|
irq_domain_alloc_fwnode() takes a parameter with the phys_addr_t type.
Currently the code passes acpi_htvec->address to it.
This can only work on 64BIT platform because its type is u64, so cast it to
phys_addr_t and then the driver works on both 32BIT and 64BIT platforms.
[ tglx: Dereference _after_ the NULL pointer check, make the cast explicit
and use the casted address as argument for htvec_init() which takes
a phys_addr_t as well. Sigh... ]
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260113085940.3344837-5-chenhuacai@loongson.cn
|
|
iocsr_read64()/iocsr_write64() are only available on 64BIT LoongArch
platform, so add and use a pair of helpers, i.e. read_isr()/write_isr()
instead to make the driver work on both 32BIT and 64BIT platforms.
This makes eoiintc_enable() a no-op for 32-bit as it is only required on
64-bit systems.
[ tglx: Make the helpers inline and fixup the variable declaration order ]
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260113085940.3344837-4-chenhuacai@loongson.cn
|
|
irq_domain_alloc_fwnode() takes a parameter with the phys_addr_t type.
Currently the code passes acpi_liointc->address to it.
This can only work on 64BIT platforms because its type is u64, so cast it to
phys_addr_t and then the driver works on both 32BIT and 64BIT platform.
[ tglx: Make the cast explicit and use the casted address as argument for
liointc_init() which takes a phys_addr_t as well. Sigh... ]
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260113085940.3344837-3-chenhuacai@loongson.cn
|
|
csr_read64() is only available on 64BIT LoongArch platform, so use the
recently added adaptive csr_read() instead to make the driver work on both
32BIT and 64BIT platforms.
This makes avecintc_enable() a no-op for 32-bit as it is only required on
64-bit systems.
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260113085940.3344837-2-chenhuacai@loongson.cn
|
|
A glitch in the edge detection circuit can cause a spurious interrupt. The
hardware manual recommends clearing the status flag after setting the
ICU_TSSRk register as a countermeasure.
Currently, a spurious interrupt is generated on the resume path of s2idle
for the PMIC RTC TINT interrupt due to a glitch related to unnecessary
enabling/disabling of the TINT enable bit.
Fix this issue by not setting TSSR(TINT Source) and TITSR(TINT Detection
Method Selection) registers if the values are the same as those set
in these registers.
Fixes: 0d7605e75ac2 ("irqchip: Add RZ/V2H(P) Interrupt Control Unit (ICU) driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260113125315.359967-2-biju.das.jz@bp.renesas.com
|
|
Commit c05671846451 ("openrisc: sleep instead of spin on secondary
wait") fixed OpenRISC SMP Linux for QEMU. However, stability was never
achieved on FPGA development boards. This is because the above patch
has a step to unmask IPIs on non-boot cpu's but on hardware without
power management, IPIs remain masked.
This meant that IPI's were never actually working on the simple SMP
systems we run on development boards. The systems booted but stability
was very suspect.
Add the ability to unmask IPI's on the non-boot cores. This is done by
making the OMPIC IRQs proper percpu IRQs. We can then use the
enabled_percpu_irq() to unmask IRQ on the non-boot cpus.
Update the or1k PIC driver to use a flow handler that can switch between
percpu and the configured level or edge flow handlers at runtime.
This mechanism is inspired by that done in the J-Core AIC driver.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Acked-by: Thomas Gleixner <tglx@kernel.org>
|
|
The renesas-rza1 driver parses the interrupt-map property. It does it
using open code.
Recently for_each_of_imap_item iterator has been introduce to help
drivers in this parsing.
Convert the renesas-rza1 driver to use the for_each_of_imap_item
iterator instead of open code.
Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260114093938.1089936-5-herve.codina@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The ls-extirq driver parses the interrupt-map property. It does it using
open code.
Recently for_each_of_imap_item iterator has been introduce to help
drivers in this parsing.
Convert the ls-extirq driver to use the for_each_of_imap_item
iterator instead of open code.
Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260114093938.1089936-4-herve.codina@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Commit c475c0b71314("irqchip/riscv-imsic: Remove redundant irq_data
lookups") leads to a NULL pointer deference in imsic_msi_update_msg():
virtio_blk virtio1: 8/0/0 default/read/poll queues
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Current kworker/u32:2 pgtable: 4K pagesize, 48-bit VAs, pgdp=0x0000000081c33000
[0000000000000000] pgd=0000000000000000, p4d=0000000000000000
CPU: 5 UID: 0 PID: 75 Comm: kworker/u32:2 Not tainted 6.19.0-rc4-next-20260109 #1 NONE
epc : 0x0
ra : imsic_irq_set_affinity+0x110/0x130
The irq_data argument of imsic_irq_set_affinity() is associated with the
imsic domain and not with the top-level MSI domain. As a consequence the
code dereferences the wrong interrupt chip, which has the
irq_write_msi_msg() callback not populated.
Signed-off-by: Luo Haiyang <luo.haiyang@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260113111930821RrC26avITHWSFCN0bYbgI@zte.com.cn
|
|
The __alloc_percpu() fails when the number of IDs are greater than 959
because size parameter of __alloc_percpu() must be less than 32768 (aka
PCPU_MIN_UNIT_SIZE). This failure is observed with KVMTOOL when AIA is
trap-n-emulated by in-kernel KVM because in this case KVM guest has 2047
interrupt IDs.
To address this issue, don't embed vector array in struct imsic_local_priv
until __alloc_percpu() support size parameter greater than 32768.
This reverts commit 79eaabc61dfb ("irqchip/riscv-imsic: Embed the vector
array in lpriv").
Signed-off-by: Anup Patel <anup.patel@oss.qualcomm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20251223143544.1504217-1-anup.patel@oss.qualcomm.com
|
