| Age | Commit message (Collapse) | Author | Lines |
|---|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Support & Features:
- Add support for the TI LP5812 4x3 matrix RGB LED driver, including
autonomous animation engine control and extensive scan multiplexing
modes
- Add a new driver for the ams Osram AS3668 4-channel I2C LED
controller
- Extend the is31fl32xx driver to support the is31fl3293 variant,
which features 3 channels and 12-bit PWM resolution
Improvements & Fixes:
- Prevent the ExpressWire KTD2801 chip from entering an undefined
state by disabling interrupts during time-sensitive communication
- Ensure the Qualcomm LPG driver detects hardware write failures by
checking the return value of regmap_bulk_write() during LUT
programming
- Fix kernel-doc warnings in the lm3692x driver by documenting
missing struct members and standardizing the comment style
- Update the ExpressWire library to use fsleep() and unexport
internal-only functions
- Improve the is31fl32xx driver by reordering code to eliminate
unnecessary forward declarations
Cleanups & Refactoring:
- Simplify the LP55XX common LED driver by utilizing the
for_each_available_child_of_node_scoped() macro for more concise
node iteration
Device Tree Bindings Updates:
- Add new YAML bindings for the TI LP5860 and LP5812 LED controllers,
and the ams Osram AS3668
- Convert the TI LM3697 white LED driver binding to DT schema format
- Allow multicolor LED nodes to be named with numeric suffixes (e.g.,
multi-led-0) to handle multiple instances without unit addresses
- Document support for the PMH0101 variant in the Qualcomm LPG PWM
and SPMI Flash LED bindings
- Add the issi,is31fl3293 compatible string to the is31fl32xx
binding"
* tag 'leds-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
dt-bindings: leds: Convert ti,lm3697 to DT schema
leds: as3668: Driver for the ams Osram 4-channel i2c LED driver
dt-bindings: leds: Add new as3668 support
docs: leds: Document TI LP5812 LED driver
leds: Add basic support for TI/National Semiconductor LP5812 LED Driver
leds: qcom-lpg: Check the return value of regmap_bulk_write()
dt-bindings: leds: qcom,spmi-flash-led: Add PMH0101 compatible
dt-bindings: leds: leds-qcom-lpg: Add support for PMH0101 PWM
dt-bindings: leds: Allow differently named multicolor LEDs
leds: lp55xx: Simplify with scoped for each OF child loop
dt-bindings: leds: add TI/National Semiconductor LP5812 LED Driver
leds: is31f132xx: Add support for is31fl3293
leds: is31f132xx: Re-order code to remove forward declarations
dt-bindings: leds: Add issi,is31fl3293 to leds-is31fl32xx
leds: expresswire: Fix chip state breakage
dt-bindings: leds: Add LP5860 LED controller
leds: lm3692x: Fix kernel-doc for struct lm3692x_led
|
|
Since there were no existing drivers for the AS3668 or related devices,
a new driver was introduced in a separate file. Similar devices were
reviewed, but none shared enough characteristics to justify code reuse.
As a result, this driver is written specifically for the AS3668.
Signed-off-by: Lukas Timmermann <linux@timmermann.space>
Link: https://patch.msgid.link/20260118165010.902086-3-linux@timmermann.space
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The LP5812 is a 4x3 matrix RGB LED driver with an autonomous animation
engine and time-cross-multiplexing (TCM) support for up to 12 LEDs or
4 RGB LEDs. Each LED can be configured through the related registers
to realize vivid and fancy lighting effects.
This patch adds minimal driver support for the LP5812, implementing
only the essential functionality: I2C communication with the device,
LED registration, brightness control in manual mode, and basic sysfs
interfaces for LED configuration and fault monitoring.
Signed-off-by: Nam Tran <trannamatk@gmail.com>
Link: https://patch.msgid.link/20260115161013.40706-2-trannamatk@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The lpg_lut_store() function currently ignores the return value of
regmap_bulk_write() and always returns 0. This can cause hardware write
failures to go undetected, leading the caller to believe LUT programming
succeeded when it may have failed.
Check the return value of regmap_bulk_write() in lpg_lut_store and return
the error to the caller on failure.
Fixes: 24e2d05d1b68 ("leds: Add driver for Qualcomm LPG")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260108175133.638-1-vulab@iscas.ac.cn
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251224124521.208635-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
This chip supports 3 LED channels with 4096 possible PWM values.
Extend the driver to support this variant:
* Make brightness steps configurable per device type
* Handle dual-register brightness updates
* Allow to specify values to write into the PWM update register
* Add custom init and shutdown function for 3293 variant
* Init registers after parsing DT properties
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://patch.msgid.link/20251219154521.643312-4-daniel@zonque.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Move the chipdef structs after the functions they reference so that forward
declarations become unnecessary.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://patch.msgid.link/20251219154521.643312-3-daniel@zonque.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
It is possible to put the KTD2801 chip in an unknown/undefined state by
changing the brightness very rapidly (for example, with a brightness
slider). When this happens, the brightness is stuck on max and cannot be
changed until the chip is power cycled.
Fix this by disabling interrupts while talking to the chip. While at it,
make expresswire_power_off() use fsleep() and also unexport some
functions meant to be internal.
Fixes: 1368d06dd2c9 ("leds: Introduce ExpressWire library")
Tested-by: Karel Balej <balejk@matfyz.cz>
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Link: https://patch.msgid.link/20251217-expresswire-fix-v2-1-4a02b10acd96@dujemihanovic.xyz
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Before this change the LED was added to leds_list before led_init_core()
gets called adding it the list before led_classdev.set_brightness_work gets
initialized.
This leaves a window where led_trigger_register() of a LED's default
trigger will call led_trigger_set() which calls led_set_brightness()
which in turn will end up queueing the *uninitialized*
led_classdev.set_brightness_work.
This race gets hit by the lenovo-thinkpad-t14s EC driver which registers
2 LEDs with a default trigger provided by snd_ctl_led.ko in quick
succession. The first led_classdev_register() causes an async modprobe of
snd_ctl_led to run and that async modprobe manages to exactly hit
the window where the second LED is on the leds_list without led_init_core()
being called for it, resulting in:
------------[ cut here ]------------
WARNING: CPU: 11 PID: 5608 at kernel/workqueue.c:4234 __flush_work+0x344/0x390
Hardware name: LENOVO 21N2S01F0B/21N2S01F0B, BIOS N42ET93W (2.23 ) 09/01/2025
...
Call trace:
__flush_work+0x344/0x390 (P)
flush_work+0x2c/0x50
led_trigger_set+0x1c8/0x340
led_trigger_register+0x17c/0x1c0
led_trigger_register_simple+0x84/0xe8
snd_ctl_led_init+0x40/0xf88 [snd_ctl_led]
do_one_initcall+0x5c/0x318
do_init_module+0x9c/0x2b8
load_module+0x7e0/0x998
Close the race window by moving the adding of the LED to leds_list to
after the led_init_core() call.
Cc: stable@vger.kernel.org
Fixes: d23a22a74fde ("leds: delay led_set_brightness if stopping soft-blink")
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Link: https://patch.msgid.link/20251211163727.366441-1-johannes.goede@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Building with W=1 reports several kernel-doc warnings in
drivers/leds/leds-lm3692x.c:
Warning: leds-lm3692x.c:122 struct member 'boost_ctrl'
not described in 'lm3692x_led'
Warning: leds-lm3692x.c:122 struct member 'brightness_ctrl'
not described in 'lm3692x_led'
Warning: leds-lm3692x.c:122 struct member 'enabled'
not described in 'lm3692x_led'
These fields were added to struct lm3692x_led but the corresponding
kernel-doc comment was not updated. Convert the kernel-doc block to
use the "@member: description" style consistently and document the
boost_ctrl, brightness_ctrl and enabled fields.
This keeps the documentation in sync with the implementation and
silences the W=1 warnings.
Signed-off-by: Vivek BalachandharTN <vivek.balachandhar@gmail.com>
Link: https://patch.msgid.link/20251201042612.2099239-1-vivek.balachandhar@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for power
management, as a preparation for future Tegra specific changes
- Reset controller updates with added drivers for LAN969x, eic770 and
RZ/G3S SoCs
- Protection of system controller registers on Renesas and Google
SoCs, to prevent trivially triggering a system crash from e.g.
debugfs access
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas"
* tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits)
memory: tegra186-emc: Fix missing put_bpmp
Documentation: reset: Remove reset_controller_add_lookup()
reset: fix BIT macro reference
reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe
reset: th1520: Support reset controllers in more subsystems
reset: th1520: Prepare for supporting multiple controllers
dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys
dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets
reset: remove legacy reset lookup code
clk: davinci: psc: drop unused reset lookup
reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
reset: eswin: Add eic7700 reset driver
dt-bindings: reset: eswin: Documentation for eic7700 SoC
reset: sparx5: add LAN969x support
dt-bindings: reset: microchip: Add LAN969x support
soc: rockchip: grf: Add select correct PWM implementation on RK3368
soc/tegra: pmc: Add USB wake events for Tegra234
amba: tegra-ahb: Fix device leak on SMMU enable
...
|
|
The PWM signal from the LPG channel can be routed to PMIC GPIOs with
proper GPIO configuration, and it is not necessary to enable the
TRILED channel in that case. This also applies to the LPG channels
that mapped to TRILED channels. Additionally, enabling the TRILED
channel unnecessarily would cause a voltage increase in its power
supply. Hence remove it.
Fixes: 24e2d05d1b68 ("leds: Add driver for Qualcomm LPG")
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://patch.msgid.link/20251119-lpg_triled_fix-v3-2-84b6dbdc774a@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
There's nothing special about RGB multi-led instances. Allow any color
combinations by simply extending the "if _RGB" checks.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Link: https://patch.msgid.link/20251117-topic-lpg_multi-v1-1-05604374a2dd@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Reorder include files to alphabetic order to simplify maintenance
No functional change.
Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
Link: https://patch.msgid.link/20251117054511.730246-3-Qing-wu.Li@leica-geosystems.com.cn
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add support for optional GPIO-based enable pin control to PWM LED driver.
Some PWM LED driver chips like TPS92380 and LT3743 require a separate
enable signal in addition to PWM control. Implement support for such
GPIO control through the "enable-gpios" device tree property, activating
the pin when LED brightness is non-zero and deactivating it when off.
Tested on i.MX8MP EVK with TPS92380 LED driver chip
Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
Link: https://patch.msgid.link/20251117054511.730246-2-Qing-wu.Li@leica-geosystems.com.cn
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Several drivers can benefit from registering per-instance data along
with the syscore operations. To achieve this, move the modifiable fields
out of the syscore_ops structure and into a separate struct syscore that
can be registered with the framework. Add a void * driver data field for
drivers to store contextual data that will be passed to the syscore ops.
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
system_wq should be the per-cpu workqueue, yet in this name nothing makes
that clear, so replace system_wq with system_percpu_wq.
The old wq (system_wq) will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251105111924.141555-1-marco.crivellari@suse.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Replace sprintf() with sysfs_emit() in sysfs show functions.
sysfs_emit() is preferred to format sysfs output as it provides better
bounds checking. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20251103120809.32834-1-thorsten.blum@linux.dev
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The function netxbig_gpio_ext_get() acquires GPIO descriptors but
fails to release them when errors occur mid-way through initialization.
The cleanup callback registered by devm_add_action_or_reset() only
runs on success, leaving acquired GPIOs leaked on error paths.
Add goto-based error handling to release all acquired GPIOs before
returning errors.
Fixes: 9af512e81964 ("leds: netxbig: Convert to use GPIO descriptors")
Suggested-by: Markus Elfring <Markus.Elfring@web.de>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251031021620.781-1-vulab@iscas.ac.cn
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
If a GPIO is used to control the chip's enable pin, it needs to be pulled
high before any i2c communication is attempted.
Currently, the enable GPIO handling is not correct.
Assume the enable GPIO is low when the probe function is entered. In this
case the device is in SHUTDOWN mode and does not react to i2c commands.
During probe the following sequence happens:
1. The call to lp50xx_reset() on line 548 has no effect as i2c is not
possible yet.
2. Then - on line 552 - lp50xx_enable_disable() is called. As
"priv->enable_gpio“ has not yet been initialized, setting the GPIO has
no effect. Also the i2c enable command is not executed as the device
is still in SHUTDOWN.
3. On line 556 the call to lp50xx_probe_dt() finally parses the rest of
the DT and the configured priv->enable_gpio is set up.
As a result the device is still in SHUTDOWN mode and not ready for
operation.
Split lp50xx_enable_disable() into distinct enable and disable functions
to enforce correct ordering between enable_gpio manipulations and i2c
commands.
Read enable_gpio configuration from DT before attempting to manipulate
enable_gpio.
Add delays to observe correct wait timing after manipulating enable_gpio
and before any i2c communication.
Cc: stable@vger.kernel.org
Fixes: 242b81170fb8 ("leds: lp50xx: Add the LP50XX family of the RGB LED driver")
Signed-off-by: Christian Hitz <christian.hitz@bbv.ch>
Link: https://patch.msgid.link/20251028155141.1603193-1-christian@klarinett.li
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
While moving said config symbol out of the "if NEW_LEDS" block, I
accidentally left a copy inside that block. Remove it.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/all/b6c481bb-e854-405e-a428-90301789fe20@infradead.org/
Fixes: 2cd0d1db31e7 ("leds: expresswire: Don't depend on NEW_LEDS")
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20250729-expresswire-dep-fix-v1-1-635cd4cc746b@dujemihanovic.xyz
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
A user reports that on their Lenovo Corsola Magneton with EC firmware
steelix-15194.270.0 the driver probe fails with EINVAL. It turns out
that the power LED does not contain any color components as indicated
by the following "ectool led power query" output:
Brightness range for LED 1:
red : 0x0
green : 0x0
blue : 0x0
yellow : 0x0
white : 0x0
amber : 0x0
The LED also does not react to commands sent manually through ectool and
is generally non-functional.
Instead of failing the probe for all LEDs managed by the EC when one
without color components is encountered, silently skip those.
Cc: stable@vger.kernel.org
Fixes: 8d6ce6f3ec9d ("leds: Add ChromeOS EC driver")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20251028-cros_ec-leds-no-colors-v1-1-ebe13a02022a@weissschuh.net
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
LP5009 supports 9 LED outputs that are grouped into 3 modules.
Cc: stable@vger.kernel.org
Fixes: 242b81170fb8 ("leds: lp50xx: Add the LP50XX family of the RGB LED driver")
Signed-off-by: Christian Hitz <christian.hitz@bbv.ch>
Link: https://patch.msgid.link/20251022063305.972190-1-christian@klarinett.li
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The module alias does not match the cell name defined in the MFD driver,
preventing automatic loading when the driver is built as a module. So fix
the module alias to ensure proper module auto-loading.
Fixes: 0ef2929a0181 ("leds: Add AAEON UP board LED driver")
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251020-leds-upboard-fix-module-alias-v2-1-84ac5c3a1a81@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
led_banks contains LED module number(s) that should be grouped into the
module bank. led_banks is 0-initialized.
By checking the led_banks entries for 0, un-set entries are detected.
But a 0-entry also indicates that LED module 0 should be grouped into the
module bank.
By only iterating over the available entries no check for unused entries
is required and LED module 0 can be added to bank.
Cc: stable@vger.kernel.org
Fixes: 242b81170fb8 ("leds: lp50xx: Add the LP50XX family of the RGB LED driver")
Signed-off-by: Christian Hitz <christian.hitz@bbv.ch>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Link: https://patch.msgid.link/20251008123222.1117331-1-christian@klarinett.li
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Many distributions disable FW_LOADER_USER_HELPER, and this configuration
makes lp55xx LEDs completely unusable. Enable their use by only implying
the user helper, since the basic LEDs and the hardware patterns can be used
with only the sysfs interface.
Tested on Nokia N900 with LP5523.
Additionally do not refer to the sysfs interface as legacy anymore, since
it might be the only one available to users.
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
fwnode_get_next_child_node() is now the same as
fwnode_get_next_available_child_node() on all backends (OF, ACPI and
swnode). In order to remove the available variants, switch the uses to
non-available variants (device_get_next_child_node() in this case).
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
fwnode_for_each_child_node() is now the same as
fwnode_for_each_available_child_node() on all backends (OF, ACPI and
swnode). In order to remove the available variants, switch the uses to
non-available variants.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add 'name' argument to of_led_get() such that it can lookup LEDs in
devicetree by either name or index.
And use this modified function to add devicetree support to the generic
(non devicetree specific) [devm_]led_get() function.
This uses the standard devicetree pattern of adding a -names string array
to map names to the indexes for an array of resources.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Aleksandrs Vinarskis <alex@vinarskis.com>
Link: https://lore.kernel.org/r/20250910-leds-v5-3-bb90a0f897d5@vinarskis.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Use devm_mutex_init() instead of hand-writing it.
This saves some LoC, improves readability and saves some space in the
generated .o file.
Before:
======
text data bss dec hex filename
20011 6752 128 26891 690b drivers/leds/leds-is31fl319x.o
After:
=====
text data bss dec hex filename
19715 6680 128 26523 679b drivers/leds/leds-is31fl319x.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/267aba6eab12be67c297fcd52fcf45a0856338bb.1757240150.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Memory programming doesn't work for devices without page support.
For example, LP5562 has 3 engines but doesn't support pages,
the start address is changed depending on engine number.
According to datasheet [1], the PROG MEM register addresses for each
engine are as follows:
Engine 1: 0x10
Engine 2: 0x30
Engine 3: 0x50
However, the current implementation incorrectly calculates the address
of PROG MEM register using the engine index starting from 1:
prog_mem_base = 0x10
LP55xx_BYTES_PER_PAGE = 0x20
Engine 1: 0x10 + 0x20 * 1 = 0x30
Engine 2: 0x10 + 0x20 * 2 = 0x50
Engine 3: 0x10 + 0x20 * 3 = 0x70
This results in writing to the wrong engine memory, causing pattern
programming to fail.
To correct it, the engine index should be decreased:
Engine 1: 0x10 + 0x20 * 0 = 0x10
Engine 2: 0x10 + 0x20 * 1 = 0x30
Engine 3: 0x10 + 0x20 * 2 = 0x50
1 - https://www.ti.com/lit/ds/symlink/lp5562.pdf
Fixes: 31379a57cf2f ("leds: leds-lp55xx: Generalize update_program_memory function")
Signed-off-by: Andrei Lalaev <andrei.lalaev@anton-paar.com>
Link: https://lore.kernel.org/r/20250820-lp5562-prog-mem-address-v1-1-8569647fa71d@anton-paar.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
There is one more set of two LEDs on the qnap devices to indicate status.
One LED is green, the other is red and while they occupy the same space
on the front panel, they cannot be enabled at the same time.
But they can interact via blink functions, the MCU can flash them
alternately, going red -> green -> red -> ... either in 500ms or
1s intervals. They can of course also blink individually.
Add specific LED functions for them and register them on probe.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250804114949.3127417-3-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The "@Cx" commands span a number of different functions, from the status
and USB LEDs to the buzzer and power button.
So change the USB-LED enum to start at 0 and adapt the offset accordingly
to not suggest @CD would relate to the USB-LED - while in fact "@CD" is a
state of the status LED.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250804114949.3127417-2-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The 3-channel flash module in PMI8998 has several registers different
than the others, such as: torch_clamp. Add different register fields
for it.
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250729-fix-torch-clamp-issue-v2-2-9b83816437a3@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
There is a register to clamp the flash current per LED channel when
safety timer is disabled. It needs to be updated according to the
maximum torch LED current setting to ensure the torch current won't
be clamped unexpectedly.
Fixes: 96a2e242a5dc ("leds: flash: Add driver to support flash LED module in QCOM PMICs")
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250729-fix-torch-clamp-issue-v2-1-9b83816437a3@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Coverity noticed that assigning value -EINVAL to 'ret' in the if
statement is useless because 'ret' is overwritten a few lines later.
However, after inspect the code, this warning reveals that we need to
return -EINVAL instead of the variable assignment. So, fix it.
Coverity-id: 1646104
Fixes: aebb5fc9a0d8 ("leds: max77705: Add LEDs support")
Signed-off-by: Len Bao <len.bao@gmx.us>
Link: https://lore.kernel.org/r/20250727075649.34496-1-len.bao@gmx.us
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
There is a spelling mistake in the LEDS_BD2606MVV config. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20250724112030.142121-1-colin.i.king@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Also add an additional and optional control register for setting the
output PWM frequency to 22kHz. The default is 3kHz and this option puts
the operational frequency outside of the audible range.
Signed-off-by: Pawel Zalewski <pzalewski@thegoodpenguin.co.uk>
Link: https://lore.kernel.org/r/20250723-leds-is31fl3236a-v6-3-210328058625@thegoodpenguin.co.uk
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Improvements & Fixes:
- A fix for QCOM Flash to prevent incorrect register access when the
driver is re-bound. This is solved by duplicating a static register
array during the probe function, which prevents register addresses
from being miscalculated after multiple binds
- The LP50xx driver now correctly handles the 'reg' property in
device tree child nodes to ensure the multi_index is set correctly.
This prevents issues where LEDs could be controlled incorrectly if
the device tree nodes were processed in a different order. An error
is returned if the reg property is missing or out of range
- Add a Kconfig dependency on between TPS6131x and
V4L2_FLASH_LED_CLASS to prevent a build failure when the driver is
built-in and the V4L2 flash infrastructure is a loadable module
- Fix a potential buffer overflow warning in PCA955x reported by
older GCC versions by using a more precise format specifier when
creating the default LED label.
Cleanups & Refactoring:
- Correct the MAINTAINERS file entry for the TPS6131X flash LED
driver to point to the correct device tree binding file name
- Fix a comment in the Flash Class for the flash_timeout setter to
"flash timeout" from "flash duration" for accuracy
- The of_led_get() function is no longer exported as it has no users
outside of its own module.
Removals:
- Revert the commit to configure LED blink intervals for hardware
offload in the Netdev Trigger. This change was found to break
existing PHY drivers by putting their LEDs into a permanent,
unconditional blinking state.
Device Tree Bindings Updates:
- Update the binding for LP50xx to document that the child reg
property is the index within the LED bank. The example was also
updated to use correct values
- Update the JNCP5623 binding to add 0x39 as a valid I2C address, as
it is used by the NCP5623C variant"
* tag 'leds-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
dt-bindings: leds: ncp5623: Add 0x39 as a valid I2C address
Revert "leds: trigger: netdev: Configure LED blink interval for HW offload"
leds: pca955x: Avoid potential overflow when filling default_label (take 2)
leds: Unexport of_led_get()
leds: tps6131x: Add V4L2_FLASH_LED_CLASS dependency
dt-bindings: leds: lp50xx: Document child reg, fix example
leds: leds-lp50xx: Handle reg to get correct multi_index
leds: led-class-flash:: Fix flash_timeout comment
MAINTAINERS: Adjust file entry in TPS6131X FLASH LED DRIVER
leds: flash: leds-qcom-flash: Fix registry access after re-bind
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Locking primitives:
- Mark devm_mutex_init() as __must_check and fix drivers that didn't
check the return code (Thomas Weißschuh)
- Reorganize <linux/local_lock.h> to better expose the internal APIs
to local variables (Sebastian Andrzej Siewior)
- Remove OWNER_SPINNABLE in rwsem (Jinliang Zheng)
- Remove redundant #ifdefs in the mutex code (Ran Xiaokai)
Lockdep:
- Avoid returning struct in lock_stats() (Arnd Bergmann)
- Change `static const` into enum for LOCKF_*_IRQ_* (Arnd Bergmann)
- Temporarily use synchronize_rcu_expedited() in
lockdep_unregister_key() to speed things up. (Breno Leitao)
Rust runtime:
- Add #[must_use] to Lock::try_lock() (Jason Devers)"
* tag 'locking-core-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep: Speed up lockdep_unregister_key() with expedited RCU synchronization
locking/mutex: Remove redundant #ifdefs
locking/lockdep: Change 'static const' variables to enum values
locking/lockdep: Avoid struct return in lock_stats()
locking/rwsem: Use OWNER_NONSPINNABLE directly instead of OWNER_SPINNABLE
rust: sync: Add #[must_use] to Lock::try_lock()
locking/mutex: Mark devm_mutex_init() as __must_check
leds: lp8860: Check return value of devm_mutex_init()
spi: spi-nxp-fspi: Check return value of devm_mutex_init()
local_lock: Move this_cpu_ptr() notation from internal to main header
|
|
This reverts commit c629c972b310af41e9e072febb6dae9a299edde6.
While .led_blink_set() would previously put an LED into an unconditional
permanently blinking state, the offending commit now uses same operation
to (also?) set the blink timing of the netdev trigger when offloading.
This breaks many if not all of the existing PHY drivers which offer
offloading LED operations, as those drivers would just put the LED into
blinking state after .led_blink_set() has been called.
Unfortunately the change even made it into stable kernels for unknown
reasons, so it should be reverted there as well.
Fixes: c629c972b310a ("leds: trigger: netdev: Configure LED blink interval for HW offload")
Link: https://lore.kernel.org/linux-leds/c6134e26-2e45-4121-aa15-58aaef327201@lunn.ch/T/#m9d6fe81bbcb273e59f12bbedbd633edd32118387
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/6dcc77ee1c9676891d6250d8994850f521426a0f.1752334655.git.daniel@makrotopia.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
devm_mutex_init() can fail. With CONFIG_DEBUG_MUTEXES=y the mutex will be
marked as unusable and trigger errors on usage.
Add the missed check.
Fixes: 87a59548af95 ("leds: lp8860: Use new mutex guards to cleanup function exits")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Andrew Davis <afd@ti.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250617-must_check-devm_mutex_init-v7-2-d9e449f4d224@weissschuh.net
|
|
GCC compiler v8.5.0 is not happy about printing
into a too short buffer (when build with `make W=1`):
drivers/leds/leds-pca955x.c:696:5: note: 'snprintf' output between 2 and 11 bytes into a destination of size 8
Unfortunately this is a false positive from the old GCC versions,
but we may still improve the code by using '%hhu' format specifier
and reduce buffer size by 4 bytes.
Fixes: bd3d14932923 ("leds: pca955x: Avoid potential overflow when filling default_label")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506282159.TXfvorYl-lkp@intel.com/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250630093906.1715800-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
There are no users outside the module.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250630092639.1574860-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
This driver can optionally use the v4l2_flash infrastructure, but fails to
link built=in if that is in a loadable module:
ld.lld-21: error: undefined symbol: v4l2_flash_release
>>> referenced by leds-tps6131x.c:792 (drivers/leds/flash/leds-tps6131x.c:792)
Add the usual Kconfig dependency for it, still allowing it to be built when
CONFIG_V4L2_FLASH_LED_CLASS is disabled.
Fixes: b338a2ae9b31 ("leds: tps6131x: Add support for Texas Instruments TPS6131X flash LED driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20250620114440.4080938-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
mc_subled used for multi_index needs well defined array indexes,
to guarantee the desired result, use reg for that.
If devicetree child nodes is processed in random or reverse order
you may end up with multi_index "blue green red" instead of the expected
"red green blue".
If user space apps uses multi_index to deduce how to control the leds
they would most likely be broken without this patch if devicetree
processing is reversed (which it appears to be).
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts has reg set
but I don't see how it can have worked without this change.
If reg is not set, an error is returned,
If reg is out of range, an error is returned.
reg within led child nodes starts with 0, to map to the iout in each bank.
Signed-off-by: Johan Adolfsson <johan.adolfsson@axis.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Link: https://lore.kernel.org/r/20250617-led-fix-v7-1-cdbe8efc88fa@axis.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The normal bin_attrs field can now handle const pointers.
This makes the _new variant unnecessary.
Switch all users back.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-4-724bfcf05b99@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
