summaryrefslogtreecommitdiffstats
path: root/drivers/media/common
AgeCommit message (Collapse)AuthorLines
2026-03-25media: uvcvideo: Add support for P010 pixel formatOliver Collyer-0/+4
Add support for the P010 (10-bit Y/UV 4:2:0) pixel format to the uvcvideo driver. This format is exposed by USB capture devices such as the Magewell USB Capture HDMI 4K Pro when capturing HDR10 content. P010 stores 10-bit Y and interleaved UV samples in 16-bit little-endian words, with data in the upper 10 bits and zeros in the lower 6 bits. This requires 2 bytes per sample, so bytesperline is wWidth * 2. V4L2_PIX_FMT_P010 was added to the V4L2 core in commit 5374d8fb75f3 ("media: Add P010 video format"). Based on the community DKMS patch from awawa-dev/P010_for_V4L2. Link: https://github.com/awawa-dev/P010_for_V4L2 Signed-off-by: Oliver Collyer <ovcollyer@mac.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patch.msgid.link/20251226065718.95504-1-ovcollyer@mac.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2026-03-17media: rc: fix race between unregister and urb/irq callbacksSean Young-0/+1
Some rc device drivers have a race condition between rc_unregister_device() and irq or urb callbacks. This is because rc_unregister_device() does two things, it marks the device as unregistered so no new commands can be issued and then it calls rc_free_device(). This means the driver has no chance to cancel any pending urb callbacks or interrupts after the device has been marked as unregistered. Those callbacks may access struct rc_dev or its members (e.g. struct ir_raw_event_ctrl), which have been freed by rc_free_device(). This change removes the implicit call to rc_free_device() from rc_unregister_device(). This means that device drivers can call rc_unregister_device() in their remove or disconnect function, then cancel all the urbs and interrupts before explicitly calling rc_free_device(). Note this is an alternative fix for an issue found by Haotian Zhang, see the Closes: tags. Reported-by: Haotian Zhang <vulab@iscas.ac.cn> Closes: https://lore.kernel.org/linux-media/20251114101432.2566-1-vulab@iscas.ac.cn/ Closes: https://lore.kernel.org/linux-media/20251114101418.2548-1-vulab@iscas.ac.cn/ Closes: https://lore.kernel.org/linux-media/20251114101346.2530-1-vulab@iscas.ac.cn/ Closes: https://lore.kernel.org/linux-media/20251114090605.2413-1-vulab@iscas.ac.cn/ Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2026-03-16media: videobuf2: Set vma_flags in vb2_dma_sg_mmapJanne Grunau-0/+1
vb2_dma_contig sets VMA flags VM_DONTEXPAND and VM_DONTDUMP and I do not see a reason why vb2_dma_sg should behave differently. This avoids hitting `WARN_ON(!(vma->vm_flags & VM_DONTEXPAND));` in drm_gem_mmap_obj() during mmap() of an imported dma-buf from the out of tree Apple ISP camera capture driver which uses vb2_dma_sg_memops. gst-launch-1.0 v4l2src ! gtk4paintablesink [ 38.201528] ------------[ cut here ]------------ [ 38.202135] WARNING: CPU: 7 PID: 2362 at drivers/gpu/drm/drm_gem.c:1144 drm_gem_mmap_obj+0x1f8/0x210 [ 38.203278] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device uinput nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables qrtr bnep nls_ascii i2c_dev loop fuse dm_multipath nfnetlink brcmfmac_wcc hid_magicmouse hci_bcm4377 brcmfmac brcmutil bluetooth ecdh_generic cfg80211 ecc btrfs xor xor_neon rfkill hid_apple raid6_pq joydev aop_als apple_nvmem_spmi industrialio snd_soc_aop apple_z2 snd_soc_cs42l84 tps6598x snd_soc_tas2764 macsmc_reboot spi_nor macsmc_hwmon rtc_macsmc gpio_macsmc macsmc_power regmap_spmi macsmc_input dockchannel_hid panel_summit appledrm nvme_apple dwc3 snd_soc_macaudio drm_client_lib nvme_core phy_apple_atc hwmon apple_sart apple_dockchannel macsmc apple_rtkit_helper spmi_apple_controller aop apple_wdt mfd_core nvmem_apple_efuses pinctrl_apple_gpio apple_isp apple_dcp videobuf2_dma_sg mux_core spi_apple [ 38.203300] videobuf2_memops i2c_pasemi_platform snd_soc_apple_mca videobuf2_v4l2 videodev clk_apple_nco videobuf2_common snd_pcm_dmaengine adpdrm asahi apple_admac adpdrm_mipi drm_dma_helper pwm_apple i2c_pasemi_core drm_display_helper mc cec apple_dart ofpart apple_soc_cpufreq leds_pwm phram [ 38.217677] CPU: 7 UID: 1000 PID: 2362 Comm: gst-launch-1.0 Tainted: G W 6.17.6+ #asahi-dev PREEMPT(full) [ 38.219040] Tainted: [W]=WARN [ 38.219398] Hardware name: Apple MacBook Pro (13-inch, M2, 2022) (DT) [ 38.220213] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 38.221088] pc : drm_gem_mmap_obj+0x1f8/0x210 [ 38.221643] lr : drm_gem_mmap_obj+0x78/0x210 [ 38.222178] sp : ffffc0008dc678e0 [ 38.222579] x29: ffffc0008dc678e0 x28: 0000000000042a97 x27: ffff8000b701b480 [ 38.223465] x26: 00000000000000fb x25: ffffc0008dc67d20 x24: ffffc0008dc67968 [ 38.224402] x23: ffff8000e3ca5600 x22: ffff8000265b7800 x21: ffff80003000c0c0 [ 38.225279] x20: 0000000000000000 x19: ffff8000b68c5200 x18: ffffc0008dc67968 [ 38.226151] x17: 0000000000000000 x16: 0000000000000000 x15: ffffc000810a30a8 [ 38.227042] x14: 00007fff637effff x13: 00005555de91ffff x12: 00007fff63293fff [ 38.227942] x11: 0000000000000000 x10: ffff8000184ecf08 x9 : ffffc0007a1900c8 [ 38.228824] x8 : ffffc0008dc67968 x7 : 0000000000000012 x6 : ffffc0015cf1c000 [ 38.229703] x5 : ffffc0008dc676a0 x4 : ffffc00081a27dc0 x3 : 0000000000000038 [ 38.230607] x2 : 0000000000000003 x1 : 0000000000000003 x0 : 00000000100000fb [ 38.231488] Call trace: [ 38.231806] drm_gem_mmap_obj+0x1f8/0x210 (P) [ 38.232342] drm_gem_mmap+0x140/0x260 [ 38.232813] __mmap_region+0x488/0x9a0 [ 38.233277] mmap_region+0xd0/0x148 [ 38.233703] do_mmap+0x350/0x5c0 [ 38.234148] vm_mmap_pgoff+0x14c/0x200 [ 38.234612] ksys_mmap_pgoff+0x150/0x208 [ 38.235107] __arm64_sys_mmap+0x34/0x50 [ 38.235611] invoke_syscall+0x50/0x120 [ 38.236075] el0_svc_common.constprop.0+0x48/0xf0 [ 38.236680] do_el0_svc+0x24/0x38 [ 38.237113] el0_svc+0x38/0x168 [ 38.237507] el0t_64_sync_handler+0xa0/0xe8 [ 38.238034] el0t_64_sync+0x198/0x1a0 [ 38.238491] ---[ end trace 0000000000000000 ]--- There were discussions in [1] at the end of 2023 that mmap() on imported dma-bufs should not be supported but as of v6.17 drm_gem_shmem_mmap() in drm_gem_shmem_helper.c still supports it. This might affect all gpu or accel drivers using drm_gem_shmem_mmap() or the wrapper drm_gem_shmem_object_mmap(). [1] https://lore.kernel.org/dri-devel/bc7f7844-0aa3-4802-b203-69d58e8be2fa@linux.intel.com/ Cc: stable@vger.kernel.org Fixes: 5ba3f757f059 ("[media] v4l: videobuf2: add DMA scatter/gather allocator") Signed-off-by: Janne Grunau <j@jannau.net> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2026-03-11media: remove unnecessary module_init/exit functionsEthan Nelson-Moore-27/+0
Three media drivers have unnecessary module_init and module_exit functions that are empty or just print a message. Remove them. Note that if a module_init function exists, a module_exit function must also exist; otherwise, the module cannot be unloaded. Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2026-02-21Convert more 'alloc_obj' cases to default GFP_KERNEL argumentsLinus Torvalds-2/+1
This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21Convert 'alloc_obj' family to use the new default GFP_KERNEL argumentLinus Torvalds-30/+30
This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21treewide: Replace kmalloc with kmalloc_obj for non-scalar typesKees Cook-33/+33
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
2025-12-18media: vb2: drop wait_prepare/finish callbacksHans Verkuil-39/+10
Drop the wait_prepare/finish callbacks. Instead require that the vb2_queue lock field is always set and use that lock when waiting for buffers to arrive. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2025-12-18media: vb2: remove vb2_ops_wait_prepare/finish helpersHans Verkuil-14/+0
Since vb2 now relies on the presence of the vb2_queue lock field and there are no more drivers that use these helpers, it is safe to drop them. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2025-11-11Merge tag 'v6.18-rc5' into media-nextMauro Carvalho Chehab-0/+5
Linux 6.18-rc5 * tag 'v6.18-rc5': (1016 commits) Linux 6.18-rc5 kbuild: Let kernel-doc.py use PYTHON3 override rtc: rx8025: fix incorrect register reference Revert "drm/nouveau: set DMA mask before creating the flush page" io_uring: fix regbuf vector size truncation compiler_types: Move unused static inline functions warning to W=2 smb: client: validate change notify buffer before copy tracing/tools: Fix incorrcet short option in usage text for --threads drm/xe: Enforce correct user fence signaling order using x86/microcode/AMD: Add more known models to entry sign checking drm/xe: Do clean shutdown also when using flr drm/xe: Move declarations under conditional branch drm/xe/guc: Synchronize Dead CT worker with unbind tracing: Fix memory leaks in create_field_var() ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader catches up tracing: tprobe-events: Fix to put tracepoint_user when disable the tprobe tracing: tprobe-events: Fix to register tracepoint correctly gpio: tb10x: Drop unused tb10x_set_bits() function drm/amd/display: Enable mst when it's detected but yet to be initialized drm/amdgpu: Fix wait after reset sequence in S3 ...
2025-11-11media: siano: Remove redundant ternary operatorsLiao Yuanhong-1/+1
For ternary operators in the form of "a ? false : true", if 'a' itself returns a boolean result, the ternary operator can be omitted. Remove redundant ternary operators to clean up the code. Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-11-03media: videobuf2: Fix device reference leak in vb2_dc_alloc error pathHaotian Zhang-0/+1
In vb2_dc_alloc(), get_device() is called to increment the device reference count. However, if subsequent DMA allocation fails (vb2_dc_alloc_coherent or vb2_dc_alloc_non_coherent returns error), the function returns without calling put_device(), causing a device reference leak. Add put_device() call in the error path before kfree() to properly release the device reference acquired earlier. Fixes: de27891f675e ("media: videobuf2: handle non-contiguous DMA allocations") Cc: stable@vger.kernel.org Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-11-03media: saa7146: Replace saa7146_ext_vv.vbi_fops with write functionLaurent Pinchart-2/+2
The vbi_fops stored in struct saa7146_ext_vv is a full v4l2_file_operations, but only its .write field is used. Replace it with a single vbi_write function pointer to save memory. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-10-24media: videobuf2: forbid remove_bufs when legacy fileio is activeMarek Szyprowski-0/+5
vb2_ioctl_remove_bufs() call manipulates queue internal buffer list, potentially overwriting some pointers used by the legacy fileio access mode. Forbid that ioctl when fileio is active to protect internal queue state between subsequent read/write calls. CC: stable@vger.kernel.org Fixes: a3293a85381e ("media: v4l2: Add REMOVE_BUFS ioctl") Reported-by: Shuangpeng Bai <SJB7183@psu.edu> Closes: https://lore.kernel.org/linux-media/5317B590-AAB4-4F17-8EA1-621965886D49@psu.edu/ Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-09-09media: update Hans Verkuil's email addressHans Verkuil-1/+1
Replace hverkuil@xs4all.nl by hverkuil@kernel.org. Signed-off-by: Hans Verkuil <hverkuil@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2025-08-29media: b2c2: Remove space before newlineColin Ian King-1/+1
There is an extraneous space before a newline in a dprintk message. Remove the space. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-29media: b2c2: flexcop: Fix coding style issuesDarshan Rathod-11/+11
The code in flexcop.c has several instances where spaces are missing after commas in function call arguments. This violates the Linux kernel coding style guidelines. This patch cleans up these minor style issues by adding the required spaces. This is a purely stylistic change with no functional impact and improves overall code readability and consistency. Signed-off-by: Darshan Rathod <darshanrathod475@gmail.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: Drop V4L2_FL_USES_V4L2_FH checksLaurent Pinchart-8/+4
Now that all drivers use v4l2_fh, we can drop the V4L2_FL_USES_V4L2_FH checks through the V4L2 core. To ensure that all new drivers use v4l2_fh, keep setting the V4L2_FL_USES_V4L2_FH flag in v4l2_fh_init(), and verify it is set after the .open() file operation returns. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-08-13media: Wrap file->private_data access with a helper functionLaurent Pinchart-1/+1
Accessing file->private_data manually to retrieve the v4l2_fh pointer is error-prone, as the field is a void * and will happily convert implicitly to any pointer type. To avoid direct access to file->private_data, introduce a new inline function that retrieves the v4l2_fh pointer, and use it to replace common access patterns through the kernel. Changes to drivers have been generated with the following coccinelle semantic patch: @@ struct file *filp; identifier fh; @@ - struct v4l2_fh *fh = filp->private_data; + struct v4l2_fh *fh = file_to_v4l2_fh(filp); Manual changes have been applied to Documentation/ to update the usage patterns, and to include/media/v4l2-fh.h to add the new function. While at it, fix a typo in the title of v4l2-fh.rst: the file describes the "file handles" API, not "file handlers". No functional change is intended, this only paves the way to remove direct accesses to file->private_data and make V4L2 drivers safer. Other accesses to the field will be addressed separately. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-06-17media: flexcop-i2c: Constify struct i2c_algorithmChristophe JAILLET-1/+1
'struct i2c_algorithm' is not modified in this driver. Constifying this structure moves some data to a read-only section, so increase overall security, especially when the structure holds some function pointers. On a x86_64, with allmodconfig, as an example: Before: ====== text data bss dec hex filename 6645 216 16 6877 1add drivers/media/common/b2c2/flexcop-i2c.o After: ===== text data bss dec hex filename 6721 160 16 6897 1af1 drivers/media/common/b2c2/flexcop-i2c.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar-2/+2
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-05-09media: videobuf2: use sgtable-based scatterlist wrappersMarek Szyprowski-2/+2
Use common wrappers operating directly on the struct sg_table objects to fix incorrect use of scatterlists sync calls. dma_sync_sg_for_*() functions have to be called with the number of elements originally passed to dma_map_sg_*() function, not the one returned in sgt->nents. Fixes: d4db5eb57cab ("media: videobuf2: add begin/end cpu_access callbacks to dma-sg") CC: stable@vger.kernel.org Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Acked-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-04-25media: videobuf2: check constants during build timeMichał Mirosław-6/+5
There is nothing a driver author can do fix in the driver to make the global constants match. Since the assertion can be verified at build time, don't return EINVAL at runtime for it. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner-4/+4
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-03-06media: siano: Fix error handling in smsdvb_module_init()Yuan Can-0/+2
The smsdvb_module_init() returns without checking the retval from smscore_register_hotplug(). If the smscore_register_hotplug() failed, the module failed to install, leaving the smsdvb_debugfs not unregistered. Fixes: 3f6b87cff66b ("[media] siano: allow showing the complete statistics via debugfs") Cc: stable@vger.kernel.org Signed-off-by: Yuan Can <yuancan@huawei.com> Acked-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-05media: v4l2-tpg: use (t,l)/wxh format for rectangleHans Verkuil-4/+4
Standardize reporting of rectangles to (t,l)/wxh. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2025-01-25Merge tag 'media/v6.14-1' of ↵Linus Torvalds-17/+0
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Sensor driver fixes - remove dead TI wl128x FM radio driver - Add support for the imx462 sensor at the IMX290 binding - V4L2 pixel data transmitter and receiver documentation improvements - Add support for MIPI Discovery and Configuration for C-PHY line orders - imx8-isi fixes and improvements - stm32: dcmipp: add core support for the stm32mp25 - qcom: camss: Add sc7280 support - Various fixes and enhancements * tag 'media/v6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (152 commits) media: nuvoton: Fix an error check in npcm_video_ece_init() media: dvb-usb-v2: af9035: fix ISO C90 compilation error on af9035_i2c_master_xfer media: platform: rzg2l-cru: rzg2l-video: Fix the comment in rzg2l_cru_start_streaming_vq() media: fix secfeed undefined when filter alloc fail media: dt-bindings: trivial white-space and example cleanup MAINTAINERS: repair file entry in MEDIA DRIVERS FOR STM32 - CSI media: solo6x10: Use const 'struct bin_attribute' callback media: saa7164: Remove unused values staging: media: imx: fix OF node leak in imx_media_add_of_subdevs() media: platform: exynos4-is: Remove unused __is_get_frame_size media: vidtv: Fix a null-ptr-deref in vidtv_mux_stop_thread media: mmp: Bring back registration of the device media: cec: include linux/debugfs.h and linux/seq_file.h where needed Revert "media: qcom: camss: Restructure camss_link_entities" media: venus: Remove unused hfi_core_ping() media: dt-bindings: qcom-venus: Deprecate video-decoder and video-encoder where applicable media: venus: Populate video encoder/decoder nodename entries media: venus: Add support for static video encoder/decoder declarations media: venus: match instance creation and destruction order media: venus: destroy hfi session after m2m_ctx release ...
2024-12-02module: Convert symbol namespace to string literalPeter Zijlstra-4/+4
Clean up the existing export namespace code along the same lines of commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") and for the same reason, it is not desired for the namespace argument to be a macro expansion itself. Scripted using git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file; do awk -i inplace ' /^#define EXPORT_SYMBOL_NS/ { gsub(/__stringify\(ns\)/, "ns"); print; next; } /^#define MODULE_IMPORT_NS/ { gsub(/__stringify\(ns\)/, "ns"); print; next; } /MODULE_IMPORT_NS/ { $0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g"); } /EXPORT_SYMBOL_NS/ { if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) { if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ && $0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ && $0 !~ /^my/) { getline line; gsub(/[[:space:]]*\\$/, ""); gsub(/[[:space:]]/, "", line); $0 = $0 " " line; } $0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/, "\\1(\\2, \"\\3\")", "g"); } } { print }' $file; done Requested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc Acked-by: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-12-02media: b2c2: Remove unused functionsDr. David Alan Gilbert-17/+0
flexcop_dma_control_size_irq() last use was removed in 2005 by commit 64221be7b900 ("[PATCH] dvb: flexcop: woraround irq stop problem") flexcop_dump_reg() last use was removed in 2009 by commit 382c5546d618 ("V4L/DVB (10694): [PATCH] software IRQ watchdog for Flexcop B2C2 DVB PCI cards") Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-11-11Merge tag 'v6.12-rc7' into __tmp-hansg-linux-tags_media_atomisp_6_13_1Mauro Carvalho Chehab-13/+18
Linux 6.12-rc7 * tag 'v6.12-rc7': (1909 commits) Linux 6.12-rc7 filemap: Fix bounds checking in filemap_read() i2c: designware: do not hold SCL low when I2C_DYNAMIC_TAR_UPDATE is not set mailmap: add entry for Thorsten Blum ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove() signal: restore the override_rlimit logic fs/proc: fix compile warning about variable 'vmcore_mmap_ops' ucounts: fix counter leak in inc_rlimit_get_ucounts() selftests: hugetlb_dio: check for initial conditions to skip in the start mm: fix docs for the kernel parameter ``thp_anon=`` mm/damon/core: avoid overflow in damon_feed_loop_next_input() mm/damon/core: handle zero schemes apply interval mm/damon/core: handle zero {aggregation,ops_update} intervals mm/mlock: set the correct prev on failure objpool: fix to make percpu slot allocation more robust mm/page_alloc: keep track of free highatomic bcachefs: Fix UAF in __promote_alloc() error path bcachefs: Change OPT_STR max to be 1 less than the size of choices array bcachefs: btree_cache.freeable list fixes bcachefs: check the invalid parameter for perf test ...
2024-11-07media: videobuf2-core: copy vb planes unconditionallyTudor Ambarus-13/+15
Copy the relevant data from userspace to the vb->planes unconditionally as it's possible some of the fields may have changed after the buffer has been validated. Keep the dma_buf_put(planes[plane].dbuf) calls in the first `if (!reacquired)` case, in order to be close to the plane validation code where the buffers were got in the first place. Cc: stable@vger.kernel.org Fixes: 95af7c00f35b ("media: videobuf2-core: release all planes first in __prepare_dmabuf()") Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Tested-by: Will McVicker <willmcvicker@google.com> Acked-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-28media: vb2: fix confusing log messageHans Verkuil-1/+1
If the number of allocated buffers is less than q->min_queued_buffers, then a debug message was logged saying that it needs at least that many queued buffers. But the test is about allocated buffers. Update the message to say "allocated buffers". Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Acked-by: Tomasz Figa <tfiga@chromium.org>
2024-10-28media: vb2: Fix commentRicardo Ribalda-1/+1
If V4L2_TYPE_IS_OUTPUT() the information has been initially provided by the user, not by the driver. Fixes: e23ccc0ad925 ("[media] v4l: add videobuf2 Video for Linux 2 driver framework") Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Acked-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-28media: common: saa7146: drop vb2_ops_wait_prepare/finishHans Verkuil-4/+0
Since commit 88785982a19d ("media: vb2: use lock if wait_prepare/finish are NULL") it is no longer needed to set the wait_prepare/finish vb2_ops callbacks as long as the lock field in vb2_queue is set. Since the vb2_ops_wait_prepare/finish callbacks already rely on that field, we can safely drop these callbacks. This simplifies the code and this is a step towards the goal of deleting these callbacks. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2024-10-28media: videobuf2-core: update vb2_thread if wait_finish/prepare are NULLHans Verkuil-6/+20
The vb2_thread is used for DVB support. This will queue and dequeue buffers automatically. It calls wait_finish/prepare around vb2_core_dqbuf() and vb2_core_qbuf(), but that assumes all drivers have these ops set. But that will change due to commit 88785982a19d ("media: vb2: use lock if wait_prepare/finish are NULL"). So instead just check if the callback is available, and if not, use q->lock, just as __vb2_wait_for_done_vb() does. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-10-18media: v4l2-tpg: prevent the risk of a division by zeroMauro Carvalho Chehab-0/+3
As reported by Coverity, the logic at tpg_precalculate_line() blindly rescales the buffer even when scaled_witdh is equal to zero. If this ever happens, this will cause a division by zero. Instead, add a WARN_ON_ONCE() to trigger such cases and return without doing any precalculation. Fixes: 63881df94d3e ("[media] vivid: add the Test Pattern Generator") Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-10-12media: siano: remove redundant null pointer checks in cec_devnode_init()Li Zetao-8/+1
Since the debugfs_create_dir() never returns a null pointer, checking the return value for a null pointer is redundant, Remove this check since debugfs_create_file can handle IS_ERR pointers. Signed-off-by: Li Zetao <lizetao1@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-10-12media: vb2: use lock if wait_prepare/finish are NULLHans Verkuil-3/+10
If the wait_prepare or wait_finish callback is set, then call it. If it is NULL and the queue lock pointer is not NULL, then just unlock/lock that mutex. This allows simplifying drivers by dropping the wait_prepare and wait_finish ops (and eventually the vb2_ops_wait_prepare/finish helpers). Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-10-12media: vb2: vb2_core_queue_init(): sanity check lock and wait_prepare/finishHans Verkuil-0/+8
Add two new checks: 1) wait_prepare and wait_finish callbacks are either both present or both unset, you can't mix. 2) if lock == NULL, then wait_prepare (and due to check 1 also wait_finish) must be present. These checks should prevent the case where lock == NULL, but there is no way to release/reacquire whatever lock is used when waiting for a buffer to arrive in VIDIOC_DQBUF. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-10-08media: uvcvideo: Add support for the D3DFMT_R5G6B5 pixmap typeDavid Given-0/+4
This media format is used by the NXP Semiconductors 1fc9:009b chipset, used by the Kaiweets KTI-W02 infrared camera. Signed-off-by: David Given <dg@cowlark.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20240918180540.10830-1-dg@cowlark.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-10-08media: uvcvideo: Add luma 16-bit interlaced pixel formatDmitry Perchanov-0/+4
The formats added by this patch are: UVC_GUID_FORMAT_Y16I Interlaced lumina format primary use in RealSense Depth cameras with stereo stream for left and right image sensors. Signed-off-by: Dmitry Perchanov <dmitry.perchanov@intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/a717a912035b0a0f82b2f35719cca0c5269e995f.camel@intel.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-09-23Merge tag 'media/v6.12-1' of ↵Linus Torvalds-91/+100
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - New CEC driver: Extron DA HD 4K Plus - Lots of driver fixes, cleanups and improvements * tag 'media/v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (179 commits) media: atomisp: Use clamp() in ia_css_eed1_8_vmem_encode() media: atomisp: Fix eed1_8 code assigning signed values to an unsigned variable media: atomisp: set lock before calling vb2_queue_init() media: atomisp: Improve binary finding debug logging media: atomisp: Drop dev_dbg() calls from hmm_[alloc|free]() media: atomisp: csi2-bridge: Add DMI quirk for t4ka3 on Xiaomi Mipad2 media: atomisp: add missing wait_prepare/finish ops media: atomisp: Remove unused declaration media: atomisp: use clamp() in compute_coring() media: atomisp: use clamp() in ia_css_eed1_8_encode() media: atomisp: Simplify ia_css_pipe_create_cas_scaler_desc_single_output() media: atomisp: Replace rarely used macro from math_support.h media: atomisp: Remove duplicated leftover, i.e. sh_css_dvs_info.h media: atomisp: bnr: fix trailing statement media: atomisp: move trailing */ to separate lines media: atomisp: move trailing statement to next line. media: atomisp: Fix trailing statement in ia_css_de.host.c media: atomisp: Fix spelling mistakes in atomisp.h media: atomisp: Fix spelling mistakes in atomisp_platform.h media: atomisp: Fix spelling mistake in csi_rx_public.h ...
2024-08-31media: siano: Remove unused declarationsYue Haibing-6/+0
There is no caller and implementation in tree, so can remove them. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-29dma-mapping: don't return errors from dma_set_max_seg_sizeChristoph Hellwig-2/+1
A NULL dev->dma_parms indicates either a bus that is not DMA capable or grave bug in the implementation of the bus code. There isn't much the driver can do in terms of error handling for either case, so just warn and continue as DMA operations will fail anyway. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
2024-08-27media: videobuf2: Drop minimum allocation requirement of 2 buffersLaurent Pinchart-7/+0
When introducing the ability for drivers to indicate the minimum number of buffers they require an application to allocate, commit 6662edcd32cc ("media: videobuf2: Add min_reqbufs_allocation field to vb2_queue structure") also introduced a global minimum of 2 buffers. It turns out this breaks the Renesas R-Car VSP test suite, where a test that allocates a single buffer fails when two buffers are used. One may consider debatable whether test suite failures without failures in production use cases should be considered as a regression, but operation with a single buffer is a valid use case. While full frame rate can't be maintained, memory-to-memory devices can still be used with a decent efficiency, and requiring applications to allocate multiple buffers for single-shot use cases with capture devices would just waste memory. For those reasons, fix the regression by dropping the global minimum of buffers. Individual drivers can still set their own minimum. Fixes: 6662edcd32cc ("media: videobuf2: Add min_reqbufs_allocation field to vb2_queue structure") Cc: stable@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20240825232449.25905-1-laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-08-14media: videobuf2-core: attach once if multiple planes share the same dbufYunke Cao-4/+26
When multiple planes use the same dma buf, each plane will have its own dma buf attachment and mapping. It is a waste of IOVA space. This patch adds a dbuf_duplicated boolean in vb2_plane. If a plane's dbuf is the same as an existing plane, do not create another attachment and mapping. Signed-off-by: Yunke Cao <yunkec@chromium.org> Acked-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-14media: videobuf2-core: reverse the iteration order in __vb2_buf_dmabuf_putYunke Cao-2/+8
This patch prepares for allowing multiple planes to share the same DMA buffer attachment. Release the planes from num_planes - 1 to 0 so that we don't leave invalid mem_priv pointers behind. Signed-off-by: Yunke Cao <yunkec@chromium.org> Acked-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-14media: videobuf2-core: release all planes first in __prepare_dmabuf()Yunke Cao-56/+59
In the existing implementation, validating planes, checking if the planes changed, releasing previous planes and reaquiring new planes all happens in the same for loop. Split the for loop into 3 parts 1. In the first for loop, validate planes and check if planes changed. 2. Call __vb2_buf_dmabuf_put() to release all planes. 3. In the second for loop, reaquire new planes. Signed-off-by: Yunke Cao <yunkec@chromium.org> Acked-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-14media: videobuf2-core: clear memory related fields in __vb2_plane_dmabuf_put()Yunke Cao-4/+4
Clear vb2_plane's memory related fields in __vb2_plane_dmabuf_put(), including bytesused, length, fd and data_offset. Remove the duplicated code in __prepare_dmabuf(). Signed-off-by: Yunke Cao <yunkec@chromium.org> Acked-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-05media: siano: Simplify smscore_load_firmware_from_fileRicardo Ribalda-14/+5
The function is never called with a loadfirmware_handler, so we can remove some dead code. We can also use this as a excuse to remove some unused type definitions. This fixes the following smatch warning: drivers/media/common/siano/smscoreapi.c:1172 smscore_load_firmware_from_file() error: we previously assumed 'loadfirmware_handler' could be null (see line 1150) Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reported-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Closes: https://lore.kernel.org/linux-media/99bd75a0-a6f3-4c47-bc89-70ffd87da756@xs4all.nl/T/#t Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
generated by cgit v1.2.3 (git 2.46.0) at 2026-05-06 12:14:15 +0000