| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
VFE-340 requires 8-byte alignment instead of 16-byte. This adjustment
prevents image corruption/misaligment when padding is needed.
Example: For SRGGB10_1X10/3280x2464, aligned BPL was 4112 instead of 4104
Fixes: 9e89149a19ed ("media: qcom: camss: add support for QCM2290 camss")
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add the <linux/bitfield.h> header to prevent erros:
>> drivers/media/platform/qcom/camss/camss-vfe-340.c:186:21: error: call to undeclared function 'FIELD_PREP'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
186 | if (bus_status & TFE_BUS_IRQ_MASK_RUP_DONE(i))
| ^
drivers/media/platform/qcom/camss/camss-vfe-340.c:36:40: note: expanded from macro 'TFE_BUS_IRQ_MASK_RUP_DONE'
36 | #define TFE_BUS_IRQ_MASK_RUP_DONE(sc) FIELD_PREP(TFE_BUS_IRQ_MASK_RUP_DONE_MASK, BIT(sc))
| ^
drivers/media/platform/qcom/camss/camss-vfe-340.c:191:21: error: call to undeclared function 'FIELD_PREP'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
191 | if (bus_status & TFE_BUS_IRQ_MASK_BUF_DONE(i))
| ^
drivers/media/platform/qcom/camss/camss-vfe-340.c:38:40: note: expanded from macro 'TFE_BUS_IRQ_MASK_BUF_DONE'
38 | #define TFE_BUS_IRQ_MASK_BUF_DONE(sg) FIELD_PREP(TFE_BUS_IRQ_MASK_BUF_DONE_MASK, BIT(sg))
| ^
2 errors generated.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509100228.xLeeYzpG-lkp@intel.com/
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Media endpoints are not devices, and there is no valid or sane usecase,
when an endpoint on the ISP side is an unavailable device.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
For sake of simplicity it makes sense to register all CAMSS subdevices
from its async notifier, this will cover all possible use cases, even
if there is no connected sensors to the CAMSS ISP.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
There is no potential for a custom .link_entities callback, remove it
by replacing with a common camss_link_entities().
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
[bod: amended for qcm2290, qcs8300, sa8775p]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Enumerate csiphy, csid and vfe resources for qcs8300.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The vfe in qcs8300 is version 690, it is same as vfe used in
lemans(sa8775p). vfe gen3 have support for vfe 690.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The CSID in qcs8300 is version 690, it is same as csid used in
lemans(sa8775p). csid gen3 have support for csid 690.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
QCS8300 uses the same CSIPHY hardware version (v1.3.0) as
SA8775P. The only difference between the two platforms is
the number of CSIPHY instances: SA8775P has four, while
QCS8300 has three.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add CAMSS_8300 enum, QCS8300 compatible and qcs8300 camss driver
private data, the private data just include some basic information
for now, later changes will enumerate with csiphy, tpg, csid and
vfe resources.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Enumerate csiphy, csid and vfe resources for lemans soc.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for VFE 690 found on lemans(SA8775P). This is
different from vfe 780 w.r.t few register offsets. It
supports two full and five lite VFE.
Co-developed-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Suresh Vankadara <quic_svankada@quicinc.com>
Co-developed-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for CSID 690 found on lemans(sa8775p) soc, This
is different from csid 780 w.r.t few register offsets and
bit-fields.
Signed-off-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for CSIPHY (v1.3.0) found on lemans(sa8775p). This
implementation is based on the titan 690 implementation.
Co-developed-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add CAMSS_8775P enum, compatible and lemans(sa8775p) camss driver
private data, the private data just include some basic information
now, later changes will enumerate with csiphy, tpg, csid and vfe
resources.
Co-developed-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Rename the file camss-vfe-780.c to camss-vfe-gen3.c to enable
reuse of VFE logic across multiple SoCs.
The lemans(sa8775p) SoC includes VFE 690, which is very similar
to VFE 780, with only minor differences in register bitfields.
Rename prepares the codebase for supporting additional SoCs
without duplicating VFE logic.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Rename the file camss-csid-780.c to camss-csid-gen3.c to enable
reuse of CSID logic across multiple SoCs.
The lemans(sa8775p) SoC includes CSID 690, which is functionally very
similar to CSID 780, with only minor differences in register
bitfields. This rename prepares the codebase for supporting
additional SoCs without duplicating CSID logic.
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The camera subsystem for QCM2290 which is based on Spectra 340.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
This is the CSI PHY version found in QCS2290/QCM2290 SoCs.
The table is extracted from downstream camera driver.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for CSID found in QCM2290, it's a simplified gen-2 version.
- There is no Test Pattern Generator (moved outside CSID)
- There is no subsampling (moved to CAMIF module)
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for TFE (Thin Front End) found in QCM2290.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
[bod: made tfe_line_iface_map and tfe_subgroup_line map static]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The 'file->private_data' pointer is reset in the vb2_fop_release()
call path. For this reason a custom handler for the .release
file operation is not needed and the driver can use
vb2_fop_release() directly.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The custom video_open() function in the camss driver open-codes the
v4l2_fh_open() helper, with an additional mutex that protects the whole
function. Given that the function does not modify any data guarded by
the lock, there's no need for using the mutex and the function can be
replaced by v4l2_fh_open().
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The -supply postfix is wrong but wasn't noticed on the CRD devices or
indeed the Dell devices, however on Lenovo devices the error comes up.
Fixes: 1830cf0f56c3 ("media: qcom: camss: Add x1e80100 specific support")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
[bod: reworded commit log per Konrad's feedback]
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
For sake of code simplicity and readability reduce the function code by
one level of indentation, the change is non-functional.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
[bod: Fixed indentation error]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
A media device can and at least for sake of simplicity should be registered
before V4L2 devices including the ones added on async completion.
The change removes the second and out of camss_probe() media device
registration path, and it allows to get a working ISP media device
independently from connected or not sensor devices.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
It's sufficient to have just one previously set csiphy_formats_sdm845 data.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
A call to media_device_init() requires media_device_cleanup() counterpart
to complete cleanup and release any allocated resources.
This has been done in the driver .remove() right from the beginning, but
error paths on .probe() shall also be fixed.
Fixes: a1d7c116fcf7 ("media: camms: Add core files")
Cc: stable@vger.kernel.org
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
phy init
The moving of init sequence hook from gen2() to subdev_init() doesn't
account for gen1 devices such as SDM660 and SDM670. The switch should find
the right offset for gen2 PHYs only, not reject gen1. Remove the default
error case to restore gen1 CSIPHY support.
Cc: stable@vger.kernel.org
Fixes: fbce0ca24c3a ("media: qcom: camss: csiphy-3ph: Move CSIPHY variables to data field inside csiphy struct")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The libcamera plugin for Pipewire may keep an open file descriptor to
the video device, even while streaming. This simplifies its operation,
as it only needs to keep track of a number instead of a file path. When
the video device is open but not streaming, the pipeline can be powered
off. Move the pipeline power management to the prepare_streaming and
unprepare_streaming functions.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Populate CAMSS with x1e80100 specific hooks.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
sequence
For various SoC skews at 4nm CSIPHY 2.1.2 is used. Add in the init sequence
with base control reg offset of 0x1000.
This initial version will support X1E80100. Take the silicon verification
PHY init parameters as a first/best guess pass.
SKEW_CAL is included as received from the qcom silicon init sequence.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Currently we have an s32 value called delay which has been inherited from
the CamX code for PHY init. This unused value relates to a post-write delay
latching time.
In the silicon test-bench which provides the basis for the CamX code the
write settle times are specified in nanoseconds.
In the upstream kernel we currently take no notice of the delay value and
use all zero in any case.
Nanosecond granularity timing from the perspective of the kernel is total
overkill, however for some PHY init sequences introduction of a settle
delay has a use.
Add support to the 3ph init sequence for microsecond level delay. A
readback of written data would probably accomplish the same thing but,
since the PHY init sequences in the wild provide a delay value - we can
just add support here for that delay and consume the values given.
Generally these delays are probably not necessary but, they do speak to a
theoretical delay that silicon test-benches utilise and therefore are
worthwhile to replicate if the given PHY init sequence has the data.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add silicon enabling support for VFE680 as found on sm8450, x1e and
derivatives thereof.
References work from Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
[bod: fix minor checkpatch linelenght splat @ lines 21, 22]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add CSI Decoder (CSID) 680 support to CAMSS. This version of CSID has been
shipped with SM8450 and x1e chips.
References work from Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Use the CSIPHY id property to find clock names instead of relying on
generating the clock names based on the control-loop index.
x1e80100 has CSIPHY0, CSIPHY1, CSIPHY2 and CSIPHY4 so simple index naming
won't work whereas and 'id' property allows any ordering and any stepping
between the CSIPHY names.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
In various places in CAMSS we assume a linear set of declared devices
{csiphy0, csiphy1, csiphy2} which currently works for upstream SoCs but for
upcoming SoCs some of the SoC resources will result in a set such as
{csiphy0, csiphy2} which will break the naive for() loops we have.
Introduce an identity property which resource declarations can populate
hence facilitating non-linear resource naming.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
A recent commit refactored the printing of the VFE hardware version, but
(without it being mentioned) also changed the log level from debug to
info.
This results in several hundred lines of repeated log spam during boot
and use, for example, on the Lenovo ThinkPad X13s:
qcom-camss ac5a000.camss: VFE:1 HW Version = 1.2.2
qcom-camss ac5a000.camss: VFE:0 HW Version = 1.2.2
qcom-camss ac5a000.camss: VFE:2 HW Version = 1.2.2
qcom-camss ac5a000.camss: VFE:2 HW Version = 1.2.2
qcom-camss ac5a000.camss: VFE:3 HW Version = 1.2.2
qcom-camss ac5a000.camss: VFE:5 HW Version = 1.3.0
qcom-camss ac5a000.camss: VFE:6 HW Version = 1.3.0
qcom-camss ac5a000.camss: VFE:4 HW Version = 1.3.0
qcom-camss ac5a000.camss: VFE:5 HW Version = 1.3.0
qcom-camss ac5a000.camss: VFE:6 HW Version = 1.3.0
qcom-camss ac5a000.camss: VFE:7 HW Version = 1.3.0
qcom-camss ac5a000.camss: VFE:7 HW Version = 1.3.0
qcom-camss ac5a000.camss: VFE:7 HW Version = 1.3.0
...
Suppress the version logging by demoting to debug level again.
Fixes: 10693fed125d ("media: qcom: camss: vfe: Move common code into vfe core")
Cc: stable@vger.kernel.org
Cc: Depeng Shao <quic_depengs@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
A recent commit refactored the printing of the CSID hardware version, but
(without it being mentioned) also changed the log level from debug to
info.
This results in repeated log spam during use, for example, on the Lenovo
ThinkPad X13s:
qcom-camss ac5a000.camss: CSID:0 HW Version = 1.0.0
qcom-camss ac5a000.camss: CSID:0 HW Version = 1.0.0
qcom-camss ac5a000.camss: CSID:0 HW Version = 1.0.0
qcom-camss ac5a000.camss: CSID:0 HW Version = 1.0.0
qcom-camss ac5a000.camss: CSID:0 HW Version = 1.0.0
Suppress the version logging by demoting to debug level again.
Fixes: f759b8fd3086 ("media: qcom: camss: csid: Move common code into csid core")
Cc: stable@vger.kernel.org
Cc: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Currently the Qualcomm CAMSS driver only supports D-PHY while the
hardware on most SoCs also supports C-PHY. Until this support is added,
check for D-PHY to make it somewhat explicit that C-PHY won't work.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Declare power-domain names "top", "ife0" and "ife1" eponymously for the
power-domains TITAN_TOP_GDSC, IFE_0_GDSC and IFE_1_GDSC respectively.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Remove redefined image data type IDs taken directly from the MIPI CSI-2
specification. Non-functional change.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Call v4l2_get_link_freq() on a pad, instead of a control handler. This way
we can soon convert v4l2_get_link_freq() to be callable only on a pad and
remove the compatibility code.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Naushir Patuck <naush@raspberrypi.com> # rp1-cfe
Acked-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> # st-mipid02
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The camera subsystem for the SDM670 the same as on SDM845 except with
3 CSIPHY ports instead of 4. Add support for the SDM670 camera
subsystem.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add support for VFE found on SM8550 (Titan 780). This implementation is
based on the titan 480 implementation. It supports the normal and lite
VFE.
Co-developed-by: Yongsheng Li <quic_yon@quicinc.com>
Signed-off-by: Yongsheng Li <quic_yon@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The CSID in sm8550 is version 780, it has new register offset
and new functionality. The buf done irq, register update and
reset are moved to CSID 780.
Co-developed-by: Yongsheng Li <quic_yon@quicinc.com>
Signed-off-by: Yongsheng Li <quic_yon@quicinc.com>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
support
Add a PHY configuration sequence and PHY resource for the sm8550 which
uses a Qualcomm Gen 2 version 2.1.2 CSI-2 PHY.
The PHY can be configured as two phase or three phase in C-PHY or D-PHY
mode. This configuration supports two-phase D-PHY mode.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add CAMSS_8550 enum, sm8550 compatible and sm8550 camss drvier private
data, the private data just include some basic information now, later
changes will enumerate with csiphy, csid and vfe resources.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
There is no CSID TPG on some SoCs, so the v4l2 ctrl in CSID driver
shouldn't be registered. Checking the supported TPG modes to indicate
if the TPG hardware exists or not and only registering v4l2 ctrl for
CSID only when the TPG hardware is present.
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add a default case in vfe_src_pad_code to get rid of a compile
warning if a new hw enum is added.
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
