| Age | Commit message (Collapse) | Author | Files | Lines |
|
Implement support for queuing and dequeuing input and output buffers
for the encoder video device using the appropriate V4L2 buffer
management ioctls.
This enables userspace applications to manage streaming buffers
required for encoding operations.
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
[bod: drop dead code size_enc_single_pipe()]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for allocating and queuing internal buffers required by the
encoder. The sizes of these buffers are derived from hardware
specifications and are essential to meet the encoder's functional and
performance requirements.
These buffers are not exposed to userspace; they are allocated and
managed internally to ensure correct and efficient hardware operation.
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
[bod: added sm8750 enc_op_int_buf_tbl enumeration during merge]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for V4L2 streaming operations on the encoder video device.
During stream-on, configure mandatory properties on the respective
planes and notify the firmware to initiate an encode session.
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
[bod: add sm8750 enc/dec declarations during merge process]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Subscribe and set mandatory properties to the firmware for HEVC and VP9
decoders.
Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # on sa8775p-ride
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add platform capabilities for HEVC and VP9 codecs in decoder driver
with related hooks.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # on sa8775p-ride
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Extend the decoder driver's supported formats to include HEVC (H.265)
and VP9. This change updates the format enumeration (VIDIOC_ENUM_FMT)
and allows setting these formats via VIDIOC_S_FMT.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # on sa8775p-ride
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Correct a typo from "dpeth" to "depth".
Cc: stable@vger.kernel.org
Fixes: 3a19d7b9e08b ("media: iris: implement set properties to firmware during streamon")
Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # on sa8775p-ride
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
handle the V4L2_DEC_CMD_STOP by initiating a drain sequence on the
firmware. Process and decode all OUTPUT buffers, that are queued by the
client, before the VIDIOC_DECODER_CMD() was issued and mark the last
buffer with the V4L2_BUF_FLAG_LAST flag. The decoder is stopped, after
processing the last buffer.
Resume the decoder when one of these operations are issued by the client:
- V4L2_DEC_CMD_START
- pair of VIDIOC_STREAMOFF() and VIDIOC_STREAMON() on the CAPTURE queue
- pair of VIDIOC_STREAMOFF() and VIDIOC_STREAMON() on the OUTPUT queue
Add the handling to resume decoding when client issues
V4L2_DEC_CMD_START to resume decoding after a source change is detected.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The decoder is stopped after it completes the dynamic resolution change
sequence. Handle VIDIOC_STREAMOFF() and VIDIOC_STREAMON() on the CAPTURE
queue to resume the decoding process.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Implement the functions for creating, queueing, releasing and destroying
the buffers for internal usage.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
For hfi_gen2, subscribe different bitstream parameters on to firmware,
to get notified of a change in any of the subscribed parameters.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
During the stream on operation, set some mandatory properties on the
firmware to start a session. Set all v4l2 properties, which are set by
the client, on to firmware, which is prepared with the dependency graph.
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
During the stream on operation, send HFI_CMD_START on the capture and
output planes to start processing on the respective planes.
During the stream off operation, send HFI_CMD_STOP to the firmware,
which is a synchronous command. After the response is received by the
firmware, the session is closed on the firmware.
Introduce different states for the instance and state transitions.
IRIS_INST_INIT - video instance is opened.
IRIS_INST_INPUT_STREAMING - stream on is completed on output plane.
IRIS_INST_OUTPUT_STREAMING - stream on is completed on capture plane.
IRIS_INST_STREAMING - stream on is completed on both output and capture
planes.
IRIS_INST_DEINIT - video instance is closed.
IRIS_INST_ERROR - error state.
|
v
-------------
+---------| INIT |--------- +
| ------------- |
| ^ ^ |
| / \ |
| / \ |
| v v |
| ----------- ----------- |
| | INPUT OUTPUT | |
|---| STREAMING STREAMING |---|
| ----------- ----------- |
| ^ ^ |
| \ / |
| \ / |
| v v |
| ------------- |
|--------| STREAMING |-----------|
| ------------- |
| | |
| | |
| v |
| ----------- |
+-------->| DEINIT |<----------+
| ----------- |
| | |
| | |
| v |
| ---------- |
+-------->| ERROR |<-----------+
----------.
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Implement the reqbuf IOCTL op and the vb2_queue_setup vb2 op in the
driver with necessary hooks.
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Implement runtime power management for iris, including a platform
specific power on/off sequence.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The Host firmware interface (HFI) is a well defined set of interfaces
for the communication between the host driver and the firmware. The
commands and responses are exchanged in form of packets. One or multiple
packets are grouped under the packet header. Each packet has a packet
type which describes the specific HFI and the payload, which holds the
corresponding value for that HFI.
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Implement open, close and poll ops.
Open:
Configure the vb2 queue and v4l2 file handler. Allocate a video instance
and add the instance to core instance list.
Close:
Free the instance and remove it from core instance list.
Poll:
Wait for an event on vb2 src and vb2 dst queues.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Stefan Schmidt <stefan.schmidt@linaro.org> # x1e80100 (Dell XPS 13 9345)
Reviewed-by: Stefan Schmidt <stefan.schmidt@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|