summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/core
AgeCommit message (Expand)AuthorLines
2015-11-09mmc: mmc: Improve reliability of mmc_select_hs400()Adrian Hunter-2/+26
2015-11-09mmc: mmc: Move mmc_switch_status()Adrian Hunter-13/+13
2015-11-09mmc: mmc: Fix HS setting in mmc_select_hs400()Adrian Hunter-6/+8
2015-11-09mmc: mmc: Improve reliability of mmc_select_hs200()Adrian Hunter-3/+22
2015-10-27mmc: pwrseq: Use highest priority for eMMC restart handlerJavier Martinez Canillas-3/+3
2015-10-27mmc: mmc: extend the mmc_send_tuning()Chaotian Jing-4/+4
2015-10-27mmc: core: Add DT bindings for eMMC hardware reset supportChaotian Jing-0/+2
2015-10-26mmc: skip reclaiming host on mmc_add_card() errorSergei Shtylyov-4/+2
2015-10-26mmc: core: Add mmc_regulator_set_vqmmc()Douglas Anderson-0/+78
2015-10-26mmc: core: move ocr-bit to voltage translation into separate functionHeiko Stuebner-16/+35
2015-10-26mmc: core: Remove MMC_CLKGATEUlf Hansson-426/+19
2015-10-26mmc: core: enable CMD19 tuning for DDR50 modeWeijun Yang-2/+18
2015-10-26mmc: debugfs: implement ios show for SDR12 and SDR25Shawn Lin-0/+6
2015-10-26mmc: Wait for card_busy before starting sdio requestsHans de Goede-0/+17
2015-10-26mmc: Add mmc_is_io_op helper functionHans de Goede-0/+7
2015-10-26mmc: pwrseq_simple: use GPIO descriptors array APIJavier Martinez Canillas-30/+15
2015-10-26mmc: debugfs: implement ios show for driver typeShawn Lin-0/+19
2015-10-26mmc: pwrseq: use gpiod_get() instead of index 0Javier Martinez Canillas-1/+1
2015-10-26mmc: core: Convert __mmc_switch() into an internal core functionUlf Hansson-1/+3
2015-10-26mmc: sd: Remove superfluous error code assignmentYousong Zhou-2/+0
2015-10-26mmc: core: Keep host claimed while invoking mmc_power_off|up()Ulf Hansson-5/+21
2015-10-21mmc: core: Fix init_card in 52MhzChaotian Jing-7/+0
2015-09-30mmc: core: fix dead loop of mmc_retuneChaotian Jing-2/+4
2015-09-29mmc: core: Don't return an error for CD/WP GPIOs when GPIOLIB is unsetUlf Hansson-2/+2
2015-08-31mmc: core: fix race condition in mmc_wait_data_doneJialing Fu-2/+4
2015-08-27mmc: block: skip trim for some kingston eMMCsShawn Lin-1/+2
2015-08-27mmc: host: use of_property_read_bool()Sergei Shtylyov-21/+21
2015-08-27mmc: core: Fixed bug in one erase-group budget TRIMRobin van der Gracht-3/+2
2015-08-17mmc: core: Optimize case for exactly one erase-group budgetDavid Jander-4/+34
2015-06-04mmc: core: Attach PM domain prior probing of SDIO func driverUlf Hansson-4/+8
2015-06-04mmc: core: Remove redundant ->power_restore() callback for SDUlf Hansson-13/+1
2015-06-04mmc: core: Remove redundant ->power_restore() callback for MMCUlf Hansson-13/+1
2015-06-01mmc: mmc: Add driver strength selectionAdrian Hunter-7/+38
2015-06-01mmc: mmc: Read card's valid driver strength maskAdrian Hunter-0/+1
2015-06-01mmc: core: Record card drive strengthAdrian Hunter-0/+6
2015-06-01mmc: core: Factor out common code in drive strength selectionAdrian Hunter-46/+46
2015-06-01mmc: core: Add 'card' to drive strength selection callbackAdrian Hunter-2/+2
2015-06-01mmc: core: Simplify card drive strength maskAdrian Hunter-20/+4
2015-06-01mmc: core: Allow card drive strength to be different to hostAdrian Hunter-45/+31
2015-06-01mmc: core: Reset driver type to defaultAdrian Hunter-0/+1
2015-06-01mmc: core: Increase delay for voltage to stabilize from 3.3V to 1.8VDoug Anderson-2/+2
2015-06-01mmc: cast u8 to unsigned long long to avoid unexpected errorKuninori Morimoto-2/+4
2015-06-01mmc: dt: Allow to specify that no write protect signal is presentLars-Peter Clausen-0/+3
2015-06-01mmc: Add support for disabling write-protect detectionLars-Peter Clausen-7/+23
2015-06-01mmc: core: Don't print reset warning if reset is not supportedAdrian Hunter-1/+2
2015-06-01mmc: core: Flag re-tuning is needed on CRC errorsAdrian Hunter-0/+6
2015-06-01mmc: core: Add support for HS400 re-tuningAdrian Hunter-0/+107
2015-06-01mmc: core: Separate out the mmc_switch status check so it can be re-usedAdrian Hunter-14/+17
2015-06-01mmc: mmc: Hold re-tuning in mmc_sleep()Adrian Hunter-2/+8
2015-06-01mmc: core: Hold re-tuning while bkops ongoingAdrian Hunter-0/+6
generated by cgit v1.2.3 (git 2.46.0) at 2026-07-20 07:46:12 +0000