| Age | Commit message (Collapse) | Author | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from IPsec, Bluetooth and netfilter
Current release - regressions:
- wifi: fix dev_alloc_name() return value check
- rds: fix recursive lock in rds_tcp_conn_slots_available
Current release - new code bugs:
- vsock: lock down child_ns_mode as write-once
Previous releases - regressions:
- core:
- do not pass flow_id to set_rps_cpu()
- consume xmit errors of GSO frames
- netconsole: avoid OOB reads, msg is not nul-terminated
- netfilter: h323: fix OOB read in decode_choice()
- tcp: re-enable acceptance of FIN packets when RWIN is 0
- udplite: fix null-ptr-deref in __udp_enqueue_schedule_skb().
- wifi: brcmfmac: fix potential kernel oops when probe fails
- phy: register phy led_triggers during probe to avoid AB-BA deadlock
- eth:
- bnxt_en: fix deleting of Ntuple filters
- wan: farsync: fix use-after-free bugs caused by unfinished tasklets
- xscale: check for PTP support properly
Previous releases - always broken:
- tcp: fix potential race in tcp_v6_syn_recv_sock()
- kcm: fix zero-frag skb in frag_list on partial sendmsg error
- xfrm:
- fix race condition in espintcp_close()
- always flush state and policy upon NETDEV_UNREGISTER event
- bluetooth:
- purge error queues in socket destructors
- fix response to L2CAP_ECRED_CONN_REQ
- eth:
- mlx5:
- fix circular locking dependency in dump
- fix "scheduling while atomic" in IPsec MAC address query
- gve: fix incorrect buffer cleanup for QPL
- team: avoid NETDEV_CHANGEMTU event when unregistering slave
- usb: validate USB endpoints"
* tag 'net-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
dpaa2-switch: validate num_ifs to prevent out-of-bounds write
net: consume xmit errors of GSO frames
vsock: document write-once behavior of the child_ns_mode sysctl
vsock: lock down child_ns_mode as write-once
selftests/vsock: change tests to respect write-once child ns mode
net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query
net/mlx5: Fix missing devlink lock in SRIOV enable error path
net/mlx5: E-switch, Clear legacy flag when moving to switchdev
net/mlx5: LAG, disable MPESW in lag_disable_change()
net/mlx5: DR, Fix circular locking dependency in dump
selftests: team: Add a reference count leak test
team: avoid NETDEV_CHANGEMTU event when unregistering slave
net: mana: Fix double destroy_workqueue on service rescan PCI path
MAINTAINERS: Update maintainer entry for QUALCOMM ETHQOS ETHERNET DRIVER
dpll: zl3073x: Remove redundant cleanup in devm_dpll_init()
selftests/net: packetdrill: Verify acceptance of FIN packets when RWIN is 0
tcp: re-enable acceptance of FIN packets when RWIN is 0
vsock: Use container_of() to get net namespace in sysctl handlers
net: usb: kaweth: validate USB endpoints
...
|
|
When the FarSync T-series card is being detached, the fst_card_info is
deallocated in fst_remove_one(). However, the fst_tx_task or fst_int_task
may still be running or pending, leading to use-after-free bugs when the
already freed fst_card_info is accessed in fst_process_tx_work_q() or
fst_process_int_work_q().
A typical race condition is depicted below:
CPU 0 (cleanup) | CPU 1 (tasklet)
| fst_start_xmit()
fst_remove_one() | tasklet_schedule()
unregister_hdlc_device()|
| fst_process_tx_work_q() //handler
kfree(card) //free | do_bottom_half_tx()
| card-> //use
The following KASAN trace was captured:
==================================================================
BUG: KASAN: slab-use-after-free in do_bottom_half_tx+0xb88/0xd00
Read of size 4 at addr ffff88800aad101c by task ksoftirqd/3/32
...
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_report+0xcb/0x5d0
? do_bottom_half_tx+0xb88/0xd00
kasan_report+0xb8/0xf0
? do_bottom_half_tx+0xb88/0xd00
do_bottom_half_tx+0xb88/0xd00
? _raw_spin_lock_irqsave+0x85/0xe0
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? __pfx___hrtimer_run_queues+0x10/0x10
fst_process_tx_work_q+0x67/0x90
tasklet_action_common+0x1fa/0x720
? hrtimer_interrupt+0x31f/0x780
handle_softirqs+0x176/0x530
__irq_exit_rcu+0xab/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
...
Allocated by task 41 on cpu 3 at 72.330843s:
kasan_save_stack+0x24/0x50
kasan_save_track+0x17/0x60
__kasan_kmalloc+0x7f/0x90
fst_add_one+0x1a5/0x1cd0
local_pci_probe+0xdd/0x190
pci_device_probe+0x341/0x480
really_probe+0x1c6/0x6a0
__driver_probe_device+0x248/0x310
driver_probe_device+0x48/0x210
__device_attach_driver+0x160/0x320
bus_for_each_drv+0x101/0x190
__device_attach+0x198/0x3a0
device_initial_probe+0x78/0xa0
pci_bus_add_device+0x81/0xc0
pci_bus_add_devices+0x7e/0x190
enable_slot+0x9b9/0x1130
acpiphp_check_bridge.part.0+0x2e1/0x460
acpiphp_hotplug_notify+0x36c/0x3c0
acpi_device_hotplug+0x203/0xb10
acpi_hotplug_work_fn+0x59/0x80
...
Freed by task 41 on cpu 1 at 75.138639s:
kasan_save_stack+0x24/0x50
kasan_save_track+0x17/0x60
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x43/0x70
kfree+0x135/0x410
fst_remove_one+0x2ca/0x540
pci_device_remove+0xa6/0x1d0
device_release_driver_internal+0x364/0x530
pci_stop_bus_device+0x105/0x150
pci_stop_and_remove_bus_device+0xd/0x20
disable_slot+0x116/0x260
acpiphp_disable_and_eject_slot+0x4b/0x190
acpiphp_hotplug_notify+0x230/0x3c0
acpi_device_hotplug+0x203/0xb10
acpi_hotplug_work_fn+0x59/0x80
...
The buggy address belongs to the object at ffff88800aad1000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 28 bytes inside of
freed 1024-byte region
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xaad0
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x100000000000040(head|node=0|zone=1)
page_type: f5(slab)
raw: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000
head: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 0100000000000003 ffffea00002ab401 00000000ffffffff 00000000ffffffff
head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88800aad0f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88800aad0f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88800aad1000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88800aad1080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88800aad1100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Fix this by ensuring that both fst_tx_task and fst_int_task are properly
canceled before the fst_card_info is released. Add tasklet_kill() in
fst_remove_one() to synchronize with any pending or running tasklets.
Since unregister_hdlc_device() stops data transmission and reception,
and fst_disable_intr() prevents further interrupts, it is appropriate
to place tasklet_kill() after these calls.
The bugs were identified through static analysis. To reproduce the issue
and validate the fix, a FarSync T-series card was simulated in QEMU and
delays(e.g., mdelay()) were introduced within the tasklet handler to
increase the likelihood of triggering the race condition.
Fixes: 2f623aaf9f31 ("net: farsync: Fix kmemleak when rmmods farsync")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260219124637.72578-1-duoming@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Merge in late fixes in preparation for the net-next PR.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The priv->rx_buffer and priv->tx_buffer are alloc'd together as
contiguous buffers in uhdlc_init() but freed as two buffers in
uhdlc_memclean().
Change the cleanup to only call dma_free_coherent() once on the whole
buffer.
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260206085334.21195-2-fourier.thomas@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The framer driver defines framer_pm_runtime_put() to return an int,
but that return value is never used. It also passes the return value
of pm_runtime_put() to the caller which is not very useful.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example.
Modify phy_pm_runtime_put() to discard the pm_runtime_put() return
value and change its return type to void.
No intentional functional impact.
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3027916.e9J7NaK4W3@rafael.j.wysocki
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.18-rc5).
Conflicts:
drivers/net/wireless/ath/ath12k/mac.c
9222582ec524 ("Revert "wifi: ath12k: Fix missing station power save configuration"")
6917e268c433 ("wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon")
https://lore.kernel.org/11cece9f7e36c12efd732baa5718239b1bf8c950.camel@sipsolutions.net
Adjacent changes:
drivers/net/ethernet/intel/Kconfig
b1d16f7c0063 ("libie: depend on DEBUG_FS when building LIBIE_FWLOG")
93f53db9f9dc ("ice: switch to Page Pool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver calls mfd_add_devices() but fails to call mfd_remove_devices()
in error paths after successful MFD device registration and in the remove
function. This leads to resource leaks where MFD child devices are not
properly unregistered.
Replace mfd_add_devices with devm_mfd_add_devices to automatically
manage the device resources.
Fixes: c96e976d9a05 ("net: wan: framer: Add support for the Lantiq PEF2256 framer")
Suggested-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20251105034716.662-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
drivers/net/wan/hdlc_ppp.c: In function ‘ppp_cp_event’:
drivers/net/wan/hdlc_ppp.c:353:17: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
353 | netdev_info(dev, "%s down\n", proto_name(pid));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wan/hdlc_ppp.c:342:17: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
342 | netdev_info(dev, "%s up\n", proto_name(pid));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Update proto_name() to return "LCP" by default instead of NULL.
This change silences the compiler without changing existing behavior
and removes the need for the local 'pname' variable in ppp_cp_event.
Suggested-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Kriish Sharma <kriish.sharma2006@gmail.com>
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Link: https://patch.msgid.link/20251013014319.1608706-1-kriish.sharma2006@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Lantiq PEF2256 framer has some little differences in behaviour
depending on its version.
Add a sysfs attribute to allow user applications to know the
version.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://patch.msgid.link/77a27941d6924b1009df0162ed9f0fa07ed6e431.1758726302.git.christophe.leroy@csgroup.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New cocci check complains:
drivers/net/wan/framer/pef2256/pef2256.c:733:3-10: WARNING: Consider using %pe to print PTR_ERR()
Link: https://lore.kernel.org/1758192227-701925-1-git-send-email-tariqt@nvidia.com
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20250918134637.2226614-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzkaller managed to trigger lock dependency in xsk_notify via
register_netdevice. As discussed in [0], using register_netdevice
in the notifiers is problematic so skip adding lapbeth for ops-locked
devices.
xsk_notifier+0xa4/0x280 net/xdp/xsk.c:1645
notifier_call_chain+0xbc/0x410 kernel/notifier.c:85
call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:2230
call_netdevice_notifiers_extack net/core/dev.c:2268 [inline]
call_netdevice_notifiers net/core/dev.c:2282 [inline]
unregister_netdevice_many_notify+0xf9d/0x2700 net/core/dev.c:12077
unregister_netdevice_many net/core/dev.c:12140 [inline]
unregister_netdevice_queue+0x305/0x3f0 net/core/dev.c:11984
register_netdevice+0x18f1/0x2270 net/core/dev.c:11149
lapbeth_new_device drivers/net/wan/lapbether.c:420 [inline]
lapbeth_device_event+0x5b1/0xbe0 drivers/net/wan/lapbether.c:462
notifier_call_chain+0xbc/0x410 kernel/notifier.c:85
call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:2230
call_netdevice_notifiers_extack net/core/dev.c:2268 [inline]
call_netdevice_notifiers net/core/dev.c:2282 [inline]
__dev_notify_flags+0x12c/0x2e0 net/core/dev.c:9497
netif_change_flags+0x108/0x160 net/core/dev.c:9526
dev_change_flags+0xba/0x250 net/core/dev_api.c:68
devinet_ioctl+0x11d5/0x1f50 net/ipv4/devinet.c:1200
inet_ioctl+0x3a7/0x3f0 net/ipv4/af_inet.c:1001
0: https://lore.kernel.org/netdev/20250625140357.6203d0af@kernel.org/
Fixes: 4c975fd70002 ("net: hold instance lock during NETDEV_REGISTER/UP")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: syzbot+e67ea9c235b13b4f0020@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e67ea9c235b13b4f0020
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250806213726.1383379-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
drivers/net/wan/lapbether.c uses stacked devices.
Like similar drivers, it must use netdev_lockdep_set_classes()
to avoid LOCKDEP splats.
This is similar to commit 9bfc9d65a1dc ("hamradio:
use netdev_lockdep_set_classes() helper")
Fixes: 7e4d784f5810 ("net: hold netdev instance lock during rtnetlink operations")
Reported-by: syzbot+377b71db585c9c705f8e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/67cd611c.050a0220.14db68.0073.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250327144439.2463509-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simplify framer_provider_simple_of_xlate() implementation by API
class_find_device_by_of_node().
Also correct comments to mark its parameter @dev as unused instead of
@args in passing.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241213-net_fix-v2-1-6d06130d630f@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/net after the previous
conversion commits apart from the wireless drivers to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Received frame from QMC contains the CRC.
Upper layers don't need this CRC and tcpdump mentioned trailing junk
data due to this CRC presence.
As some other HDLC driver, simply discard this CRC.
Fixes: d0f2258e79fd ("net: wan: Add support for QMC HDLC")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240730063133.179598-1-herve.codina@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The carrier_lock spinlock protects the carrier detection. While it is
held, framer_get_status() is called which in turn takes a mutex.
This is not correct and can lead to a deadlock.
A run with PROVE_LOCKING enabled detected the issue:
[ BUG: Invalid wait context ]
...
c204ddbc (&framer->mutex){+.+.}-{3:3}, at: framer_get_status+0x40/0x78
other info that might help us debug this:
context-{4:4}
2 locks held by ifconfig/146:
#0: c0926a38 (rtnl_mutex){+.+.}-{3:3}, at: devinet_ioctl+0x12c/0x664
#1: c2006a40 (&qmc_hdlc->carrier_lock){....}-{2:2}, at: qmc_hdlc_framer_set_carrier+0x30/0x98
Avoid the spinlock usage and convert carrier_lock to a mutex.
Fixes: 54762918ca85 ("net: wan: fsl_qmc_hdlc: Add framer support")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240730063104.179553-1-herve.codina@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20240409091203.39062-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add HAS_IOPORT as dependency for
those drivers requiring them. For the DEFXX driver the use of I/O
ports is optional and we only need to fence specific code paths. It also
turns out that with HAS_IOPORT handled explicitly HAMRADIO does not need
the !S390 dependency and successfully builds the bpqether driver.
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Maciej W. Rozycki <macro@orcam.me.uk>
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The fsl_qmc_driver does not compile as module:
error: ‘qmc_hdlc_driver’ undeclared here (not in a function);
405 | MODULE_DEVICE_TABLE(of, qmc_hdlc_driver);
| ^~~~~~~~~~~~~~~
Fix the typo.
Fixes: b40f00ecd463 ("net: wan: Add support for QMC HDLC")
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Closes: https://lore.kernel.org/linux-kernel/87ttl93f7i.fsf@mail.lhotse/
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/9684419fd714cc489a3ef36d838d3717bb6aec6d.1709886922.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add framer support in the fsl_qmc_hdlc driver in order to be able to
signal carrier changes to the network stack based on the framer status
Also use this framer to provide information related to the E1/T1 line
interface on IF_GET_IFACE and configure the line interface according to
IF_IFACE_{E1,T1} information.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
QMC channels support runtime timeslots changes but nothing is done at
the QMC HDLC driver to handle these changes.
Use existing IFACE ioctl in order to configure the timeslots to use.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The QMC HDLC driver provides support for HDLC using the QMC (QUICC
Multichannel Controller) to transfer the HDLC data.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the framer_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20240302-class_cleanup-net-next-v1-2-8fa378595b93@marliere.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The xlate callbacks are supposed to translate of_phandle_args to proper
provider without modifying the of_phandle_args. Make the argument
pointer to const for code safety and readability.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240217100306.86740-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to Slic Maxim ds26522 card driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240108181610.2697017-9-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Linus Walleij says:
====================
Immutable tag for the PEF2256 framer
* tag 'pef2256-framer' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
MAINTAINERS: Add the Lantiq PEF2256 driver entry
pinctrl: Add support for the Lantic PEF2256 pinmux
net: wan: framer: Add support for the Lantiq PEF2256 framer
dt-bindings: net: Add the Lantiq PEF2256 E1/T1/J1 framer
net: wan: Add framer framework support
====================
Link: https://lore.kernel.org/all/CACRpkdYT1J7noFUhObFgfA60XQAfL4rb=knEmWS__TKKtCMh7Q@mail.gmail.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Lantiq PEF2256 is a framer and line interface component designed to
fulfill all required interfacing between an analog E1/T1/J1 line and the
digital PCM system highway/H.100 bus.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231128132534.258459-4-herve.codina@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
A framer is a component in charge of an E1/T1 line interface.
Connected usually to a TDM bus, it converts TDM frames to/from E1/T1
frames. It also provides information related to the E1/T1 line.
The framer framework provides a set of APIs for the framer drivers
(framer provider) to create/destroy a framer and APIs for the framer
users (framer consumer) to obtain a reference to the framer, and
use the framer.
This basic implementation provides a framer abstraction for:
- power on/off the framer
- get the framer status (line state)
- be notified on framer status changes
- get/set the framer configuration
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231128132534.258459-2-herve.codina@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/r/20231117095922.876489-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/b0488fa6181a47668e5737905ae7adc8d7cd055e.1701713943.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/r/20231117095922.876489-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/8c9ffca75ea24810f9ba05a514d5ad59847cc4fe.1701713943.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that napi_schedule return a bool, we can drop napi_reschedule that
does the same exact function. The function comes from a very old commit
bfe13f54f502 ("ibm_emac: Convert to use napi_struct independent of struct
net_device") and the purpose is actually deprecated in favour of
different logic.
Convert every user of napi_reschedule to napi_schedule.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> # ath10k
Acked-by: Nick Child <nnac123@linux.ibm.com> # ibm
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for can/dev/rx-offload.c
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20231009133754.9834-3-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
in uhdlc_close()
Process the result of hdlc_open() and call uhdlc_close()
in case of an error. It is necessary to pass the error
code up the control flow, similar to a possible
error in request_irq().
Also add a hdlc_close() call to the uhdlc_close()
because the comment to hdlc_close() says it must be called
by the hardware driver when the HDLC device is being closed
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It probbaly makes no sense to support arbitrary network devices
for lapbether.
syzbot reported:
skbuff: skb_under_panic: text:ffff80008934c100 len:44 put:40 head:ffff0000d18dd200 data:ffff0000d18dd1ea tail:0x16 end:0x140 dev:bond1
kernel BUG at net/core/skbuff.c:200 !
Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 5643 Comm: dhcpcd Not tainted 6.4.0-rc5-syzkaller-g4641cff8e810 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_panic net/core/skbuff.c:196 [inline]
pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210
lr : skb_panic net/core/skbuff.c:196 [inline]
lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210
sp : ffff8000973b7260
x29: ffff8000973b7270 x28: ffff8000973b7360 x27: dfff800000000000
x26: ffff0000d85d8150 x25: 0000000000000016 x24: ffff0000d18dd1ea
x23: ffff0000d18dd200 x22: 000000000000002c x21: 0000000000000140
x20: 0000000000000028 x19: ffff80008934c100 x18: ffff8000973b68a0
x17: 0000000000000000 x16: ffff80008a43bfbc x15: 0000000000000202
x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000001
x11: 0000000000000201 x10: 0000000000000000 x9 : f22f7eb937cced00
x8 : f22f7eb937cced00 x7 : 0000000000000001 x6 : 0000000000000001
x5 : ffff8000973b6b78 x4 : ffff80008df9ee80 x3 : ffff8000805974f4
x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086
Call trace:
skb_panic net/core/skbuff.c:196 [inline]
skb_under_panic+0x13c/0x140 net/core/skbuff.c:210
skb_push+0xf0/0x108 net/core/skbuff.c:2409
ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1383
dev_hard_header include/linux/netdevice.h:3137 [inline]
lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257
lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447
lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149
lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251
lapb_establish_data_link+0x94/0xec
lapb_device_event+0x348/0x4e0
notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93
raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461
__dev_notify_flags+0x2bc/0x544
dev_change_flags+0xd0/0x15c net/core/dev.c:8643
devinet_ioctl+0x858/0x17e4 net/ipv4/devinet.c:1150
inet_ioctl+0x2ac/0x4d8 net/ipv4/af_inet.c:979
sock_do_ioctl+0x134/0x2dc net/socket.c:1201
sock_ioctl+0x4ec/0x858 net/socket.c:1318
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:856
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52
el0_svc_common+0x138/0x244 arch/arm64/kernel/syscall.c:142
do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:191
el0_svc+0x4c/0x160 arch/arm64/kernel/entry-common.c:647
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:665
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Code: aa1803e6 aa1903e7 a90023f5 947730f5 (d4210000)
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A fairly standard release for SPI with the exception of a change to
the API for specifying chip selects done in preparation for supporting
devices with more than one chip select, this required some mechanical
changes throughout the tree which have been cooking in -next happily
for a while.
There's also a new API to allow us to support TPM chips on half duplex
controllers.
Summary:
- Refactoring in preparation for supporting multiple chip selects for
a single device, needed by some flash devices, which required a
change in the SPI device API visible throughout the tree
- Support for hardware assisted interaction with SPI TPMs on half
duplex controllers, implemented on nVidia Tedra210 QuadSPI
- Optimisation for large transfers on fsl-cpm devices
- Cleanups around device property use which fix some sisues with
fwnode
- Use of both void remove() and devm_platform_.*ioremap_resource()
- Support for AMD Pensando Elba, Amlogic A1, Cadence device mode,
Intel MetorLake-S and StarFive J7110 QuadSPI"
* tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (185 commits)
spi: bcm63xx: use macro DEFINE_SIMPLE_DEV_PM_OPS
spi: tegra210-quad: Enable TPM wait polling
spi: Add TPM HW flow flag
spi: bcm63xx: remove PM_SLEEP based conditional compilation
spi: cadence-quadspi: use macro DEFINE_SIMPLE_DEV_PM_OPS
spi: spi-cadence: Add support for Slave mode
spi: spi-cadence: Switch to spi_controller structure
spi: cadence-quadspi: fix suspend-resume implementations
spi: dw: Add support for AMD Pensando Elba SoC
spi: dw: Add AMD Pensando Elba SoC SPI Controller
spi: cadence-quadspi: Disable the SPI before reconfiguring
spi: cadence-quadspi: Update the read timeout based on the length
spi: spi-loopback-test: Add module param for iteration length
spi: add support for Amlogic A1 SPI Flash Controller
dt-bindings: spi: add Amlogic A1 SPI controller
spi: fsl-spi: No need to check transfer length versus word size
spi: fsl-spi: Change mspi_apply_cpu_mode_quirks() to void
spi: fsl-cpm: Use 16 bit mode for large transfers with even size
spi: fsl-spi: Re-organise transfer bits_per_word adaptation
spi: fsl-spi: Fix CPM/QE mode Litte Endian
...
|
|
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to of_property_read_bool().
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for net/can
Acked-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
call
Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod
members of struct spi_device to be an array. But changing the type of these
members to array would break the spi driver functionality. To make the
transition smoother introduced four new APIs to get/set the
spi->chip_select & spi->cs_gpiod and replaced all spi->chip_select and
spi->cs_gpiod references with get or set API calls.
While adding multi-cs support in further patches the chip_select & cs_gpiod
members of the spi_device structure would be converted to arrays & the
"idx" parameter of the APIs would be used as array index i.e.,
spi->chip_select[idx] & spi->cs_gpiod[idx] respectively.
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20230310173217.3429788-3-amit.kumar-mahapatra@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If uhdlc_priv_tsa != 1 then utdm is not initialized.
And if ret != NULL then goto undo_uhdlc_init, where
utdm is dereferenced. Same if dev == NULL.
Found by Astra Linux on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: 8d68100ab4ad ("soc/fsl/qe: fix err handling of ucc_of_parse_tdm")
Signed-off-by: Esina Ekaterina <eesina@astralinux.ru>
Link: https://lore.kernel.org/r/20230112074703.13558-1-eesina@astralinux.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are two memory leaks reported by kmemleak:
unreferenced object 0xffff888114b20200 (size 128):
comm "modprobe", pid 4846, jiffies 4295146524 (age 401.345s)
hex dump (first 32 bytes):
e0 62 57 09 81 88 ff ff e0 62 57 09 81 88 ff ff .bW......bW.....
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff815bcd82>] kmalloc_trace+0x22/0x60
[<ffffffff83d35c78>] __hw_addr_add_ex+0x198/0x6c0
[<ffffffff83d3989d>] dev_addr_init+0x13d/0x230
[<ffffffff83d1063d>] alloc_netdev_mqs+0x10d/0xe50
[<ffffffff82b4a06e>] alloc_hdlcdev+0x2e/0x80
[<ffffffffa016a741>] fst_add_one+0x601/0x10e0 [farsync]
...
unreferenced object 0xffff88810b85b000 (size 1024):
comm "modprobe", pid 4846, jiffies 4295146523 (age 401.346s)
hex dump (first 32 bytes):
00 00 b0 02 00 c9 ff ff 00 70 0a 00 00 c9 ff ff .........p......
00 00 00 f2 00 00 00 f3 0a 00 00 00 02 00 00 00 ................
backtrace:
[<ffffffff815bcd82>] kmalloc_trace+0x22/0x60
[<ffffffffa016a294>] fst_add_one+0x154/0x10e0 [farsync]
[<ffffffff82060e83>] local_pci_probe+0xd3/0x170
...
The root cause is traced to the netdev and fst_card_info are not freed
when removes one fst in fst_remove_one(), which may trigger oom if
repeated insmod and rmmod module.
Fix it by adding free_netdev() and kfree() in fst_remove_one(), just as
the operations on the error handling path in fst_add_one().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If lapb_register() failed when lapb device goes to up for the first time,
the NAPI is not disabled. As a result, the invalid opcode issue is
reported when the lapb device goes to up for the second time.
The stack info is as follows:
[ 1958.311422][T11356] kernel BUG at net/core/dev.c:6442!
[ 1958.312206][T11356] invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[ 1958.315979][T11356] RIP: 0010:napi_enable+0x16a/0x1f0
[ 1958.332310][T11356] Call Trace:
[ 1958.332817][T11356] <TASK>
[ 1958.336135][T11356] lapbeth_open+0x18/0x90
[ 1958.337446][T11356] __dev_open+0x258/0x490
[ 1958.341672][T11356] __dev_change_flags+0x4d4/0x6a0
[ 1958.345325][T11356] dev_change_flags+0x93/0x160
[ 1958.346027][T11356] devinet_ioctl+0x1276/0x1bf0
[ 1958.346738][T11356] inet_ioctl+0x1c8/0x2d0
[ 1958.349638][T11356] sock_ioctl+0x5d1/0x750
[ 1958.356059][T11356] __x64_sys_ioctl+0x3ec/0x1790
[ 1958.365594][T11356] do_syscall_64+0x35/0x80
[ 1958.366239][T11356] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 1958.377381][T11356] </TASK>
Fixes: 514e1150da9c ("net: x25: Queue received packets in the drivers instead of per-CPU queues")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221107011445.207372-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
lapbeth_device_event()
When following tests are performed, it will cause dev reference counting
leakage.
a)ip link add bond2 type bond mode balance-rr
b)ip link set bond2 up
c)ifenslave -f bond2 rose1
d)ip link del bond2
When new bond device is created, the default type of the bond device is
ether. And the bond device is up, lapbeth_device_event() receives the
message and creates a new lapbeth device. In this case, the reference
count value of dev is hold once. But after "ifenslave -f bond2 rose1"
command is executed, the type of the bond device is changed to rose. When
the bond device is unregistered, lapbeth_device_event() will not put the
dev reference count.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Delete the redundant word 'the'.
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Link: https://lore.kernel.org/r/20220604040917.8926-1-wangxiang@cdjrlc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
A handful of WAN drivers use custom napi weights,
switch them to the new API.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Looks like all the changes to this driver had been automated
churn since git era begun. The driver is using virt_to_bus(),
it's just a maintenance burden unlikely to have any users.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
