| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The datasheet lists this signal as PRI_TDI, not PRI_DTI.
Fix the pin name to match the documentation and JTAG naming
convention (TDI = Test Data In).
Signed-off-by: Hendrik Hamerlinck <hendrik.hamerlinck@hammernet.be>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The debug output for spacemit_pinconf_dbg_show() prints an extra newline
at the end. This is redundant as pinconf_pins_show() in pinconf.c already
adds a newline in its for loop.
Remove the newline to avoid the extra line in the output.
Example current output:
$ cat /sys/kernel/debug/pinctrl/d401e000.pinctrl/pinconf-pins
Pin config settings per pin
Format: pin (name): configs
pin 0 (GPIO_00): , bias pull disabled, io type (Fixed/1V8), drive strength (32 mA), register (0x1041)
pin 1 (GPIO_01): slew rate (0x0), bias pull disabled, io type (Fixed/1V8), drive strength (32 mA), register (0x1041)
pin 2 (GPIO_02): slew rate (0x0), bias pull disabled, io type (Fixed/1V8), drive strength (32 mA), register (0x1041)
...
Signed-off-by: Hendrik Hamerlinck <hendrik.hamerlinck@hammernet.be>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/20250805150701.129113-1-hendrik.hamerlinck@hammernet.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
For SpacemiT K1 SoC's pinctrl, explicitly acquiring clocks in
the driver instead of relying on bootloader or default hardware
settings to enable it.
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://lore.kernel.org/20250416-02-k1-pinctrl-clk-v2-2-2b5fcbd4183c@gentoo.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Core changes:
- None really.
New drivers:
- AMD ISP411 "AMD ISP" driver
- Exynos 2200 and 7870 SoC subdrivers
- Sophgo RISC-V SG2042 and SG2044 subdrivers
- Amlogic A4 subdriver
- Rockchip RK3528 subdriver
- Broadcom BCM21664 subdriver
- Allwinner A523/T527 subdriver
- Ingenic X1600 subdriver
- Microchip SAMA7D65 subdriver, essentially a re-branded Atmel AT91
PIO4 driver, but nowadays a Microschip SoC line
Improvements:
- Bring in the devm_kmemdup_array() helper and use it throughout,
also bring in changes to other subsystems for this to establish
this helper
- Support EGPIO on the Qualcomm SA8775P SoC
- Extend EINT support in the Mediatek driver"
* tag 'pinctrl-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (101 commits)
pinctrl: mediatek: Add EINT support for multiple addresses
pinctrl: amlogic-a4: Drop surplus semicolon
pinctrl: nuvoton: Reduce use of OF-specific APIs
pinctrl: nuvoton: Convert to use struct group_desc
pinctrl: nuvoton: Make use of struct pinfunction and PINCTRL_PINFUNCTION()
pinctrl: nuvoton: Convert to use struct pingroup and PINCTRL_PINGROUP()
pinctrl: npcm8xx: Fix incorrect struct npcm8xx_pincfg assignment
pinctrl: tegra: Fix off by one in tegra_pinctrl_get_group()
pinctrl: PINCTRL_AMDISP should depend on DRM_AMD_ISP
pinctrl: qcom: sa8775p: Enable egpio function
dt-bindings: pinctrl: qcom: Add egpio function for sa8775p
pinctrl: qcom: tlmm-test: Validate irq_enable delivers edge irqs
pinctrl: qcom: Clear latched interrupt status when changing IRQ type
dt-bindings: pinctrl: airoha: Add missing gpio-ranges property
pinctrl: bcm281xx: Add missing assignment in bcm21664_pinctrl_lock_all()
pinctrl: amd: isp411: Fix IS_ERR() vs NULL check in probe()
dt-bindings: pinctrl: at91-pio4: add microchip,sama7d65-pinctrl
pinctrl: tegra: Set SFIO mode to Mux Register
pinctrl-tegra: Restore SFSEL bit when freeing pins
pinctrl: tegra: Add descriptions for SoC data fields
...
|
|
Merely enabling compile-testing should not enable additional
functionality.
Fixes: 7ff4faba63571c51 ("pinctrl: spacemit: enable config option")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://lore.kernel.org/6881b8d1ad74ac780af8a974e604b5ef3f5d4aad.1742198691.git.geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The mutex initialized in probe() is never cleaned up. Use
devm_mutex_init() to destroy it automatically.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/20250305102710.52762-1-brgl@bgdev.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Pinctrl is an essential driver for SpacemiT's SoC,
The uart driver requires it, same as sd card driver,
so let's enable it by default for this SoC.
The CONFIG_PINCTRL_SPACEMIT_K1 isn't enabled when using
'make defconfig' to select kernel configuration options.
This result in a broken uart driver where fail at probe()
stage due to no pins found.
Fixes: a83c29e1d145 ("pinctrl: spacemit: add support for SpacemiT K1 SoC")
Reported-by: Alex Elder <elder@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/20250218-k1-pinctrl-option-v3-1-36e031e0da1b@gentoo.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The map pointer is freed by pinctrl_utils_free_map(). It must not be a
devm_ pointer or it leads to a double free when the device is unloaded.
This is similar to a couple bugs Harshit Mogalapalli fixed earlier in
commits 3fd976afe974 ("pinctrl: nuvoton: fix a double free in
ma35_pinctrl_dt_node_to_map_func()") and 4575962aeed6 ("pinctrl: sophgo:
fix double free in cv1800_pctrl_dt_node_to_map()").
Fixes: a83c29e1d145 ("pinctrl: spacemit: add support for SpacemiT K1 SoC")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/4b5f1306-dc01-4edc-96d3-b232b930ddf2@stanley.mountain
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
SpacemiT's K1 SoC has a pinctrl controller which use single register
to describe all functions, which include bias pull up/down(strong pull),
drive strength, schmitter trigger, slew rate, mux mode.
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/20241016-02-k1-pinctrl-v5-2-03d395222e4f@gentoo.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
