summaryrefslogtreecommitdiffstats
path: root/drivers/platform/x86/intel
AgeCommit message (Collapse)AuthorLines
2026-02-23platform/x86: intel-hid: Enable 5-button array on ThinkPad X1 Fold 16 Gen 1Leif Skunberg-0/+7
The Lenovo ThinkPad X1 Fold 16 Gen 1 has physical volume up/down buttons that are handled through the intel-hid 5-button array interface. The firmware does not advertise 5-button array support via HEBC, so the driver relies on a DMI allowlist to enable it. Add the ThinkPad X1 Fold 16 Gen 1 to the button_array_table so the volume buttons work out of the box. Signed-off-by: Leif Skunberg <diamondback@cohunt.app> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Link: https://patch.msgid.link/20260210085625.34380-1-diamondback@cohunt.app Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2026-02-23platform/x86: int3472: Handle GPIO type 0x10 (DOVDD)Leif Skunberg-0/+7
The Lenovo ThinkPad X1 Fold 16 Gen 1 has an OV5675 sensor (ACPI HID OVTI5675) behind an INT3472 discrete PMIC controller. The INT3472 _DSM returns GPIO type 0x10 for one of the pins, which controls the DOVDD (digital I/O power) regulator enable. Type 0x10 is not currently handled by the driver, causing the GPIO to be ignored with a warning. Add INT3472_GPIO_TYPE_DOVDD (0x10) and handle it as a regulator with con_id "dovdd" to match the supply name used by sensor drivers (e.g. ov5675). Also increase GPIO_SUPPLY_NAME_LENGTH from 5 to 6 to accommodate the "dovdd" name (5 chars + null terminator). Signed-off-by: Leif Skunberg <diamondback@cohunt.app> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Link: https://patch.msgid.link/20260210132129.17943-1-diamondback@cohunt.app Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2026-02-23platform/x86: intel-hid: Add Dell 16 Plus 2-in-1 to dmi_vgbs_allow_listPeter Metz-0/+6
The Dell 16 Plus 2-in-1 (model DB06250) requires the VGBS allow list entry to correctly enable the tablet mode switch. Without this, the chassis state is not reported, and the hinge rotation only emits unknown scancodes. Link: https://lore.kernel.org/platform-driver-x86/CAP3yi-BWm0LqkhfzTrGy5n-KQ=3+T8eRMoR+Z+7Ke2VJB43kTA@mail.gmail.com/ Signed-off-by: Peter Metz <peter.metz@unarin.com> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Link: https://patch.msgid.link/20260213230310.299974-1-peter.metz@unarin.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2026-02-23platform/x86: intel-hid: Add Dell 14 Plus 2-in-1 to dmi_vgbs_allow_listPeter Metz-0/+6
The Dell 14 Plus 2-in-1 (model DB04250) requires the VGBS allow list entry to correctly enable the tablet mode switch. Without this, the chassis state is not reported, and the hinge rotation only emits unknown scancodes. Verified on Dell 14 Plus 2-in-1 DB04250. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221090 Signed-off-by: Peter Metz <peter.metz@unarin.com> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Link: https://patch.msgid.link/20260213044627.203638-1-peter.metz@unarin.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2026-02-22Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL usesKees Cook-4/+3
Conversion performed via this Coccinelle script: // SPDX-License-Identifier: GPL-2.0-only // Options: --include-headers-for-types --all-includes --include-headers --keep-comments virtual patch @gfp depends on patch && !(file in "tools") && !(file in "samples")@ identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex, kzalloc_obj,kzalloc_objs,kzalloc_flex, kvmalloc_obj,kvmalloc_objs,kvmalloc_flex, kvzalloc_obj,kvzalloc_objs,kvzalloc_flex}; @@ ALLOC(... - , GFP_KERNEL ) $ make coccicheck MODE=patch COCCI=gfp.cocci Build and boot tested x86_64 with Fedora 42's GCC and Clang: Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21Convert more 'alloc_obj' cases to default GFP_KERNEL argumentsLinus Torvalds-8/+4
This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21Convert 'alloc_flex' family to use the new default GFP_KERNEL argumentLinus Torvalds-1/+1
This is the exact same thing as the 'alloc_obj()' version, only much smaller because there are a lot fewer users of the *alloc_flex() interface. As with alloc_obj() version, this was done entirely with mindless brute force, using the same script, except using 'flex' in the pattern rather than 'objs*'. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21Convert 'alloc_obj' family to use the new default GFP_KERNEL argumentLinus Torvalds-10/+10
This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21treewide: Replace kmalloc with kmalloc_obj for non-scalar typesKees Cook-27/+26
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
2026-02-13Merge tag 'platform-drivers-x86-v7.0-1' of ↵Linus Torvalds-109/+158
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Ilpo Järvinen: "Highlights: - amd/pmf: - Avoid overwriting BIOS input values when events occur rapidly - Fix PMF driver issues related to S4 (in part on crypto/ccp side) - Add NPU metrics API (for accel side consumers) - Allow disabling Smart PC function through a module parameter - asus-wmi & HID/asus: - Unification of backlight control (replaces quirks) - Support multiple interfaces for controlling keyboard/RGB brightness - Simplify init sequence - hp-wmi: - Add manual fan control for Victus S models - Add fan mode keep-alive - Fix platform profile values for Omen 16-wf1xxx - Add EC offset to get the thermal profile - intel/pmc: Show substate residencies also for non-primary PMCs - intel/ISST: - Store and restore data for all domains - Write interface improvements - lenovo-wmi: - Support multiple Capability Data - Add HWMON reporting and tuning support - mellanox/mlx-platform: Add HI173 & HI174 support - surface/aggregator_registry: Add Surface Pro 11 (QCOM) - thinkpad_acpi: Add support for HW damage detection capability - uniwill: Implement cTGP setting - wmi: - Introduce marshalling support - Convert a few drivers to use the new buffer-based WMI API - tools/power/x86/intel-speed-select: Allow read operations for non-root - Miscellaneous cleanups / refactoring / improvements" * tag 'platform-drivers-x86-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (68 commits) platform/x86: lenovo-wmi-{capdata,other}: Fix HWMON channel visibility platform/x86: hp-wmi: Add EC offsets to read Victus S thermal profile platform: mellanox: mlx-platform: Add support DGX flavor of next-generation 800GB/s ethernet switch. platform: mellanox: mlx-platform: Add support for new Nvidia DGX system based on class VMOD0010 HID: asus: add support for the asus-wmi brightness handler platform/x86: asus-wmi: add keyboard brightness event handler platform/x86: asus-wmi: remove unused keyboard backlight quirk HID: asus: listen to the asus-wmi brightness device instead of creating one platform/x86: asus-wmi: Add support for multiple kbd led handlers HID: asus: early return for ROG devices HID: asus: move vendor initialization to probe HID: asus: fortify keyboard handshake HID: asus: use same report_id in response HID: asus: initialize additional endpoints only for certain devices HID: asus: simplify RGB init sequence platform/wmi: string-kunit: Add missing oversized string test case platform/x86/amd/pmf: Added a module parameter to disable the Smart PC function platform/x86/uniwill: Implement cTGP setting platform/x86: uniwill-laptop: Introduce device descriptor system platform/x86/amd: Use scope-based cleanup for wbrf_record() ...
2026-02-12Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of ↵Linus Torvalds-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves disk space by teaching ocfs2 to reclaim suballocator block group space (Heming Zhao) - "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the ARRAY_END() macro and uses it in various places (Alejandro Colomar) - "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the page size (Pnina Feder) - "kallsyms: Prevent invalid access when showing module buildid" cleans up kallsyms code related to module buildid and fixes an invalid access crash when printing backtraces (Petr Mladek) - "Address page fault in ima_restore_measurement_list()" fixes a kexec-related crash that can occur when booting the second-stage kernel on x86 (Harshit Mogalapalli) - "kho: ABI headers and Documentation updates" updates the kexec handover ABI documentation (Mike Rapoport) - "Align atomic storage" adds the __aligned attribute to atomic_t and atomic64_t definitions to get natural alignment of both types on csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain) - "kho: clean up page initialization logic" simplifies the page initialization logic in kho_restore_page() (Pratyush Yadav) - "Unload linux/kernel.h" moves several things out of kernel.h and into more appropriate places (Yury Norov) - "don't abuse task_struct.group_leader" removes the usage of ->group_leader when it is "obviously unnecessary" (Oleg Nesterov) - "list private v2 & luo flb" adds some infrastructure improvements to the live update orchestrator (Pasha Tatashin) * tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits) watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency procfs: fix missing RCU protection when reading real_parent in do_task_stat() watchdog/softlockup: fix sample ring index wrap in need_counting_irqs() kcsan, compiler_types: avoid duplicate type issues in BPF Type Format kho: fix doc for kho_restore_pages() tests/liveupdate: add in-kernel liveupdate test liveupdate: luo_flb: introduce File-Lifecycle-Bound global state liveupdate: luo_file: Use private list list: add kunit test for private list primitives list: add primitives for private list manipulations delayacct: fix uapi timespec64 definition panic: add panic_force_cpu= parameter to redirect panic to a specific CPU netclassid: use thread_group_leader(p) in update_classid_task() RDMA/umem: don't abuse current->group_leader drm/pan*: don't abuse current->group_leader drm/amd: kill the outdated "Only the pthreads threading model is supported" checks drm/amdgpu: don't abuse current->group_leader android/binder: use same_thread_group(proc->tsk, current) in binder_mmap() android/binder: don't abuse current->group_leader kho: skip memoryless NUMA nodes when reserving scratch areas ...
2026-02-10Merge tag 'irq-cleanups-2026-02-09' of ↵Linus Torvalds-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq cleanups from Thomas Gleixner: "A series of treewide cleanups to ensure interrupt request consistency. - Add the missing IRQF_COND_ONESHOT flag to devm_request_irq() This is inconsistent vs request_irq() and causes the same issues which where addressed with the introduction of this flag - Cleanup IRQF_ONESHOT and IRQF_NO_THREAD usage Quite some drivers have inconsistent interrupt request flags related to interrupt threading namely IRQF_ONESHOT and IRQF_NO_THREAD. This leads to warnings and/or malfunction when forced interrupt threading is enabled. - Remove stub primary (hard interrupt) handlers A bunch of drivers implement a stub primary (hard interrupt) handler which just returns IRQ_WAKE_THREAD. The same functionality is provided by the core code when the primary handler argument of request_thread_irq() is set to NULL" * tag 'irq-cleanups-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: media: pci: mg4b: Use IRQF_NO_THREAD mfd: wm8350-core: Use IRQF_ONESHOT thermal/qcom/lmh: Replace IRQF_ONESHOT with IRQF_NO_THREAD rtc: amlogic-a4: Remove IRQF_ONESHOT usb: typec: fusb302: Remove IRQF_ONESHOT EDAC/altera: Remove IRQF_ONESHOT char: tpm: cr50: Remove IRQF_ONESHOT ARM: versatile: Remove IRQF_ONESHOT scsi: efct: Use IRQF_ONESHOT and default primary handler Bluetooth: btintel_pcie: Use IRQF_ONESHOT and default primary handler bus: fsl-mc: Use default primary handler mailbox: bcm-ferxrm-mailbox: Use default primary handler iommu/amd: Use core's primary handler and set IRQF_ONESHOT platform/x86: int0002: Remove IRQF_ONESHOT from request_irq() genirq: Set IRQF_COND_ONESHOT in devm_request_irq().
2026-02-09Merge tag 'acpi-6.20-rc1' of ↵Linus Torvalds-69/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "This one is significantly larger than previous ACPI support pull requests because several significant updates have coincided in it. First, there is a routine ACPICA code update, to upstream version 20251212, but this time it covers new ACPI 6.6 material that has not been covered yet. Among other things, it includes definitions of a few new ACPI tables and updates of some others, like the GICv5 MADT structures and ARM IORT IWB node definitions that are used for adding GICv5 ACPI probing on ARM (that technically is IRQ subsystem material, but it depends on the ACPICA changes, so it is included here). The latter alone adds a few hundred lines of new code. Second, there is an update of ACPI _OSC handling including a fix that prevents failures from occurring in some corner cases due to careless handling of _OSC error bits. On top of that, the "system resource" ACPI device objects with the PNP0C01 and PNP0C02 are now going to be handled by the ACPI core device enumeration code instead of handing them over to the legacy PNP system driver which causes device enumeration issues to occur. Some of those issues have been worked around in device drivers and elsewhere and those workarounds should not be necessary any more, so they are going away. Moreover, the time has come to convert all "core ACPI" device drivers that were still using struct acpi_driver objects for device binding into proper platform drivers that use struct platform_driver for this purpose. These updates are accompanied by some requisite core ACPI device enumeration code changes. Next, there are ACPI APEI updates, including changes to avoid excess overhead in the NMI handler and in SEA on the ARM side, changes to unify ACPI-based HW error tracing and logging, and changes to prevent APEI code from reaching out of its allocated memory. There are also some ACPI power management updates, mostly related to the ACPI cpuidle support in the processor driver, suspend-to-idle handling on systems with ACPI support and to ACPI PM of devices. In addition to the above, bugs are fixed and the code is cleaned up in assorted places all over. Specifics: - Update the ACPICA code in the kernel to upstream version 20251212 which includes the following changes: * Add support for new ACPI table DTPR (Michal Camacho Romero) * Release objects with acpi_ut_delete_object_desc() (Zilin Guan) * Add UUIDs for Microsoft fan extensions and UUIDs associated with TPM 2.0 devices (Armin Wolf) * Fix NULL pointer dereference in acpi_ev_address_space_dispatch() (Alexey Simakov) * Add KEYP ACPI table definition (Dave Jiang) * Add support for the Microsoft display mux _OSI string (Armin Wolf) * Add definitions for the IOVT ACPI table (Xianglai Li) * Abort AML bytecode execution on AML_FATAL_OP (Armin Wolf) * Include all fields in subtable type1 for PPTT (Ben Horgan) * Add GICv5 MADT structures and Arm IORT IWB node definitions (Jose Marinho) * Update Parameter Block structure for RAS2 and add a new flag in Memory Affinity Structure for SRAT (Pawel Chmielewski) * Add _VDM (Voltage Domain) object (Pawel Chmielewski) - Add support for GICv5 ACPI probing on ARM which is based on the GICv5 MADT structures and ARM IORT IWB node definitions recently added to ACPICA (Lorenzo Pieralisi) - Rework ACPI PM notification setup for PCI root buses and modify the ACPI PM setup for devices to register wakeup source objects under physical (that is, PCI, platform, etc.) devices instead of doing that under their ACPI companions (Rafael Wysocki) - Adjust debug messages regarding postponed ACPI PM printed during system resume to be more accurate (Rafael Wysocki) - Remove dead code from lps0_device_attach() (Gergo Koteles) - Start to invoke Microsoft Function 9 (Turn On Display) of the Low- Power S0 Idle (LPS0) _DSM in the suspend-to-idle resume flow on systems with ACPI LPS0 support to address a functional issue on Lenovo Yoga Slim 7i Aura (15ILL9), where system fans and keyboard backlights fail to resume after suspend (Jakob Riemenschneider) - Add sysfs attribute cid for exposing _CID lists under ACPI device objects (Rafael Wysocki) - Replace sprintf() with sysfs_emit() in all of the core ACPI sysfs interface code (Sumeet Pawnikar) - Use acpi_get_local_u64_address() in the code implementing ACPI support for PCI to evaluate _ADR instead of evaluating that object directly (Andy Shevchenko) - Add JWIPC JVC9100 to irq1_level_low_skip_override[] to unbreak serial IRQs on that system (Ai Chao) - Fix handling of _OSC errors in acpi_run_osc() to avoid failures on systems where _OSC error bits are set even though the _OSC return buffer contains acknowledged feature bits (Rafael Wysocki) - Clean up and rearrange \_SB._OSC handling for general platform features and USB4 features to avoid code duplication and unnecessary memory management overhead (Rafael Wysocki) - Make the ACPI core device enumeration code handle PNP0C01 and PNP0C02 ("system resource") device objects directly instead of letting the legacy PNP system driver handle them to avoid device enumeration issues on systems where PNP0C02 is present in the _CID list under ACPI device objects with a _HID matching a proper device driver in Linux (Rafael Wysocki) - Drop workarounds for the known device enumeration issues related to _CID lists containing PNP0C02 (Rafael Wysocki) - Drop outdated comment regarding removed function in the ACPI-based device enumeration code (Julia Lawall) - Make PRP0001 device matching work as expected for ACPI device objects using it as a _HID for board development and similar purposes (Kartik Rajput) - Use async schedule function in acpi_scan_clear_dep_fn() to avoid races with user space initialization on some systems (Yicong Yang) - Add a piece of documentation explaining why binding drivers directly to ACPI device objects is not a good idea in general and why it is desirable to convert drivers doing so into proper platform drivers that use struct platform_driver for device binding (Rafael Wysocki) - Convert multiple "core ACPI" drivers, including the NFIT ACPI device driver, the generic ACPI button drivers, the generic ACPI thermal zone driver, the ACPI hardware event device (HED) driver, the ACPI EC driver, the ACPI SMBUS HC driver, the ACPI Smart Battery Subsystem (SBS) driver, and the ACPI backlight (video) driver to proper platform drivers that use struct platform_driver for device binding (Rafael Wysocki) - Use acpi_get_local_u64_address() in the ACPI backlight (video) driver to evaluate _ADR instead of evaluating that object directly (Andy Shevchenko) - Convert the generic ACPI battery driver to a proper platform driver using struct platform_driver for device binding (Rafael Wysocki) - Fix incorrect charging status when current is zero in the generic ACPI battery driver (Ata İlhan Köktürk) - Use LIST_HEAD() for initializing a stack-allocated list in the generic ACPI watchdog device driver (Can Peng) - Rework the ACPI idle driver initialization to register it directly from the common initialization code instead of doing that from a CPU hotplug "online" callback and clean it up (Huisong Li, Rafael Wysocki) - Fix a possible NULL pointer dereference in acpi_processor_errata_piix4() (Tuo Li) - Make read-only array non_mmio_desc[] static const (Colin Ian King) - Prevent the APEI GHES support code on ARM from accessing memory out of bounds or going past the ARM processor CPER record buffer (Mauro Carvalho Chehab) - Prevent cper_print_fw_err() from dumping the entire memory on systems with defective firmware (Mauro Carvalho Chehab) - Improve ghes_notify_nmi() status check to avoid unnecessary overhead in the NMI handler by carrying out all of the requisite preparations and the NMI registration time (Tony Luck) - Refactor the GHES driver by extracting common functionality into reusable helper functions to reduce code duplication and improve the ghes_notify_sea() status check in analogy with the previous ghes_notify_nmi() status check improvement (Shuai Xue) - Make ELOG and GHES log and trace consistently and support the CPER CXL protocol analogously (Fabio De Francesco) - Disable KASAN instrumentation in the APEI GHES driver when compile testing with clang < 18 (Nathan Chancellor) - Let ghes_edac be the preferred driver to load on __ZX__ and _BYO_ systems by extending the platform detection list in the APEI GHES driver (Tony W Wang-oc) - Clean up cppc_perf_caps and cppc_perf_ctrls structs and rename EPP constants for clarity in the ACPI CPPC library (Sumit Gupta)" * tag 'acpi-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (117 commits) ACPI: battery: fix incorrect charging status when current is zero ACPI: scan: Use async schedule function in acpi_scan_clear_dep_fn() ACPI: x86: s2idle: Invoke Microsoft _DSM Function 9 (Turn On Display) ACPI: APEI: GHES: Add ghes_edac support for __ZX__ and _BYO_ systems ACPI: APEI: GHES: Disable KASAN instrumentation when compile testing with clang < 18 ACPI: sysfs: Replace sprintf() with sysfs_emit() ACPI: CPPC: Rename EPP constants for clarity ACPI: CPPC: Clean up cppc_perf_caps and cppc_perf_ctrls structs ACPI: processor: idle: Rework the handling of acpi_processor_ffh_lpi_probe() ACPI: processor: idle: Convert acpi_processor_setup_cpuidle_dev() to void ACPI: processor: idle: Convert acpi_processor_setup_cpuidle_states() to void irqchip/gic-v5: Add ACPI IWB probing irqchip/gic-v5: Add ACPI ITS probing irqchip/gic-v5: Add ACPI IRS probing irqchip/gic-v5: Split IRS probing into OF and generic portions PCI/MSI: Make the pci_msi_map_rid_ctlr_node() interface firmware agnostic irqdomain: Add parent field to struct irqchip_fwid ACPI: PCI: simplify code with acpi_get_local_u64_address() ACPI: video: simplify code with acpi_get_local_u64_address() ACPI: PM: Adjust messages regarding postponed ACPI PM ...
2026-02-05Merge branch 'acpi-bus'Rafael J. Wysocki-69/+2
Merge ACPI support updates related to _OSC evaluation, the handling of "system resource" device objects, and ACPI-based device enumeration for 6.20-rc1/7.0-rc1: - Fix handling of _OSC errors in acpi_run_osc() to avoid failures on systems where _OSC error bits are set even though the _OSC return buffer contains acknowledged feature bits (Rafael Wysocki) - Clean up and rearrange \_SB._OSC handling for general platform features and USB4 features to avoid code duplication and unnecessary memory management overhead (Rafael Wysocki) - Make the ACPI core device enumeration code handle PNP0C01 and PNP0C02 ("system resource") device objects directly instead of letting the legacy PNP system driver handle them to avoid device enumeration issues on systems where PNP0C02 is present in the _CID list under ACPI device objects with a _HID matching a proper device driver in Linux (Rafael Wysocki) - Drop workarounds for the known device enumeration issues related to _CID lists containing PNP0C02 (Rafael Wysocki) - Drop outdated comment regarding removed function in the ACPI-based device enumeration code (Julia Lawall) - Make PRP0001 device matching work as expected for ACPI device objects using it as a _HID for board development and similar purposes (Kartik Rajput) - Use async schedule function in acpi_scan_clear_dep_fn() to avoid races with user space initialization on some systems (Yicong Yang) * acpi-bus: ACPI: scan: Use async schedule function in acpi_scan_clear_dep_fn() ACPI: bus: Align acpi_device_get_match_data() with driver match order ACPI: scan: Drop outdated comment regarding removed function ACPI: scan: Use resource_type() for resource type checking ACPI: bus: Fix typo under sizeof() in acpi_run_osc() ACPI: bus: Adjust acpi_osc_handshake() parameter list ACPI: bus: Rework the handling of \_SB._OSC USB4 features ACPI: bus: Adjust feature mask creation for \_SB._OSC ACPI: bus: Rework the handling of \_SB._OSC platform features ACPI: bus: Rename label and use ACPI_FREE() in acpi_run_osc() ACPI: bus: Split _OSC error processing out of acpi_run_osc() ACPI: bus: Split _OSC evaluation out of acpi_run_osc() ACPI: bus: Rework printing debug messages on _OSC errors ACPI: bus: Fix handling of _OSC errors in acpi_run_osc() ACPI: PNP: Drop acpi_nonpnp_device_ids[] platform/x86/intel/vbtn: Stop creating a platform device platform/x86/intel/hid: Stop creating a platform device ACPI: PNP: Drop PNP0C01 and PNP0C02 from acpi_pnp_device_ids[]
2026-02-01platform/x86: int0002: Remove IRQF_ONESHOT from request_irq()Sebastian Andrzej Siewior-2/+2
Passing IRQF_ONESHOT ensures that the interrupt source is masked until the secondary (threaded) handler is done. If only a primary handler is used then the flag makes no sense because the interrupt cannot fire (again) while its handler is running. The flag also prevents force-threading of the primary handler and the irq-core will warn about this. The flag was added to match the flag on the shared handler which uses a threaded handler and therefore IRQF_ONESHOT. This is no longer needed because devm_request_irq() now passes IRQF_COND_ONESHOT for this case. Revert adding IRQF_ONESHOT to irqflags. Fixes: 8f812373d1958 ("platform/x86: intel: int0002_vgpio: Pass IRQF_ONESHOT to request_irq()") Reported-by: Borah, Chaitanya Kumar <chaitanya.kumar.borah@intel.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://patch.msgid.link/20260128095540.863589-3-bigeasy@linutronix.de Closes: https://lore.kernel.org/all/555f1c56-0f74-41bf-8bd2-6217e0aab0c6@intel.com
2026-01-29platform/x86/intel/tpmi/plr: Make the file domain<n>/status writeableRicardo Neri-1/+1
The file sys/kernel/debug/tpmi-<n>/plr/domain<n>/status has store and show callbacks. Make it writeable. Fixes: 811f67c51636d ("platform/x86/intel/tpmi: Add new auxiliary driver for performance limits") Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Link: https://patch.msgid.link/20260127-plr-debugfs-write-v1-1-1fffbc370b1e@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2026-01-26platform/x86: intel_telemetry: Fix PSS event register maskKaushlendra Kumar-1/+1
The PSS telemetry info parsing incorrectly applies TELEM_INFO_SRAMEVTS_MASK when extracting event register count from firmware response. This reads bits 15-8 instead of the correct bits 7-0, causing misdetection of hardware capabilities. The IOSS path correctly uses TELEM_INFO_NENABLES_MASK for register count. Apply the same mask to PSS parsing for consistency. Fixes: 9d16b482b059 ("platform:x86: Add Intel telemetry platform driver") Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Link: https://patch.msgid.link/20251224061144.3925519-1-kaushlendra.kumar@intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2026-01-26platform/x86: intel_telemetry: Fix swapped arrays in PSS outputKaushlendra Kumar-2/+2
The LTR blocking statistics and wakeup event counters are incorrectly cross-referenced during debugfs output rendering. The code populates pss_ltr_blkd[] with LTR blocking data and pss_s0ix_wakeup[] with wakeup data, but the display loops reference the wrong arrays. This causes the "LTR Blocking Status" section to print wakeup events and the "Wakes Status" section to print LTR blockers, misleading power management analysis and S0ix residency debugging. Fix by aligning array usage with the intended output section labels. Fixes: 87bee290998d ("platform:x86: Add Intel Telemetry Debugfs interfaces") Cc: stable@vger.kernel.org Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Link: https://patch.msgid.link/20251224032053.3915900-1-kaushlendra.kumar@intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2026-01-26platform/x86/intel/vsec: Add Nova Lake PUNIT supportDavid E. Box-0/+2
Add PCI ID for Nova Lake, supporting PUNIT telemetry. Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://patch.msgid.link/20260122022110.3231344-1-david.e.box@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2026-01-26Merge branch 'fixes' of into for-nextIlpo Järvinen-3/+5
2026-01-20kernel.h: drop hex.h and update all hex.h usersRandy Dunlap-0/+1
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of hex.h interfaces to directly #include <linux/hex.h> as part of the process of putting kernel.h on a diet. Removing hex.h from kernel.h means that 36K C source files don't have to pay the price of parsing hex.h for the roughly 120 C source files that need it. This change has been build-tested with allmodconfig on most ARCHes. Also, all users/callers of <linux/hex.h> in the entire source tree have been updated if needed (if not already #included). Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-01-20platform/x86/intel/wmi: thunderbolt: Use new buffer-based WMI APIArmin Wolf-15/+11
Use the new buffer-based WMI API to avoid having to deal with ACPI at all. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://patch.msgid.link/20260116204116.4030-7-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2026-01-20platform/x86: intel-wmi-sbl-fw-update: Use new buffer-based WMI APIArmin Wolf-25/+18
Use the new buffer-based WMI API to also support ACPI firmware implementations that return a ACPI buffer instead of a ACPI integer. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://patch.msgid.link/20260116204116.4030-6-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2026-01-13platform/x86/intel/pmc: Remove double empty lineXi Pardee-1/+0
Remove double empty line to improve readability. Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com> Link: https://patch.msgid.link/20260108223144.504267-5-xi.pardee@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2026-01-13platform/x86/intel/pmc: Enable substate residencies for multiple PMCsXi Pardee-8/+18
Enable substate residencies support for multiple PMCs. Previously substate residencies were shown only for the primary PMC. This change enables substate residencies for all available PMCs. The output of substate_residencies with this patch will be similar to this: pmc0 Substate Residency S0i2.0 0 S0i2.1 0 S0i2.2 0 pmc1 Substate Residency S0i2.0 0 S0i2.1 0 S0i2.2 0 pmc2 Substate Residency S0i2.0 0 Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com> Link: https://patch.msgid.link/20260108223144.504267-4-xi.pardee@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2026-01-13platform/x86/intel/pmc: Move LPM mode attributes to PMCXi Pardee-20/+34
Move LPM modes attributes from the pmc_dev to the pmc structure. LPM modes are PMC-specific and should be stored within the pmc structure. After the change, LPM mode information will be retrieved and stored per PMC. The substate_requirements attribute in debugfs will display the requirements for each enabled LPM substate. Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com> Link: https://patch.msgid.link/20260108223144.504267-3-xi.pardee@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2026-01-13platform/x86/intel/pmc: Change LPM mode fields to u8Xi Pardee-12/+15
Change the datatypes of num_lpm_modes and lpm_en_modes[] from int to u8. The u8 type is more appropriate and improves the readability and maintainability of the code. Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com> Link: https://patch.msgid.link/20260108223144.504267-2-xi.pardee@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2026-01-13platform/x86: ISST: Optimize suspend/resume callbacksSrinivas Pandruvada-0/+17
If SST-CP or SST-PP is not supported then don't store configuration during suspend callback and restore during resume callback. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://patch.msgid.link/20260107061649.1634737-1-srinivas.pandruvada@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2026-01-13platform/x86: ISST: Check for admin capability for write commandsSrinivas Pandruvada-5/+6
In some SST deployments, administrators want to allow reading SST capabilities for non-root users. This can be achieved by changing file permissions for "/dev/isst_interface", but they still want to prevent any changes to the SST configuration by non-root users. This capability was available before for non-TPMI SST. Extend the same capability for TPMI SST by adding a check for CAP_SYS_ADMIN for all write commands. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://patch.msgid.link/20260107060729.1634420-1-srinivas.pandruvada@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2026-01-13platform/x86: ISST: Store and restore all domains dataSrinivas Pandruvada-21/+33
The suspend/resume callbacks currently only store and restore the configuration for power domain 0. However, other power domains may also have modified configurations that need to be preserved across suspend/ resume cycles. Extend the store/restore functionality to handle all power domains. Fixes: 91576acab020 ("platform/x86: ISST: Add suspend/resume callbacks") Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> CC: stable@vger.kernel.org Link: https://patch.msgid.link/20260107060256.1634188-3-srinivas.pandruvada@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2026-01-13platform/x86: ISST: Add missing write block checkSrinivas Pandruvada-0/+3
If writes are blocked, then return error during SST-CP enable command. Add missing write block check in this code path. Fixes: 8bed9ff7dbcc ("platform/x86: ISST: Process read/write blocked feature status") Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260107060256.1634188-2-srinivas.pandruvada@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2026-01-06platform/x86/intel/uncore-freq: Replace sprintf() with sysfs_emit()Kaushlendra Kumar-4/+4
Replace sprintf() with sysfs_emit() in sysfs show functions. The sysfs_emit() function is the preferred way to format sysfs output as it ensures proper buffer bounds checking and correct return values. Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Link: https://patch.msgid.link/20251230124516.229125-3-kaushlendra.kumar@intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2026-01-06platform/x86/intel/uncore-freq: Replace sprintf() with scnprintf()Kaushlendra Kumar-2/+3
Replace unbounded sprintf() calls with scnprintf() to prevent potential buffer overflows when formatting device names. While the current format strings cannot overflow the buffer, using scnprintf() follows kernel best practices for string formatting. Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Link: https://patch.msgid.link/20251230124516.229125-2-kaushlendra.kumar@intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-12-29platform/x86/intel/pmt/discovery: use valid device pointer in dev_err_probeAlok Tiwari-2/+2
The PMT feature probe creates a child device with device_create(). If device creation fail, the code pass priv->dev (which is an ERR_PTR) to dev_err_probe(), which is not a valid device pointer. This patch change the dev_err_probe() call to use the parent auxiliary device (&auxdev->dev) and update the error message to reference the parent device name. It ensure correct error reporting and avoid passing an invalid device pointer. Fixes: d9a078809356 ("platform/x86/intel/pmt: Add PMT Discovery driver") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Link: https://patch.msgid.link/20251224095133.115678-1-alok.a.tiwari@oracle.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-12-23platform/x86/intel/pmt: Fix kobject memory leak on init failureKaushlendra Kumar-1/+3
When kobject_init_and_add() fails in pmt_features_discovery(), the function returns without calling kobject_put(). This violates the kobject API contract where kobject_put() must be called even on initialization failure to properly release allocated resources. Fixes: d9a078809356 ("platform/x86/intel/pmt: Add PMT Discovery driver") Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Link: https://patch.msgid.link/20251223084041.3832933-1-kaushlendra.kumar@intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-12-23platform/x86: intel/pmt: Replace sprintf() with sysfs_emit()Kaushlendra Kumar-3/+3
Replace sprintf() calls with sysfs_emit() in guid_show(), size_show(), and offset_show() sysfs attribute handlers. The sysfs_emit() function provides automatic buffer bounds checking and is the preferred method for formatting sysfs output per Documentation/filesystems/sysfs.rst. This improves safety by preventing potential buffer overflows and aligns with current kernel coding standards for sysfs attribute implementation. Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Link: https://patch.msgid.link/20251218074833.2948801-1-kaushlendra.kumar@intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-12-16platform/x86/intel/vbtn: Stop creating a platform deviceRafael J. Wysocki-29/+1
Now that "system" devices are represented as platform devices, they are not claimed by the PNP ACPI scan handler any more and the Intel virtual button array platform devices should be created by the ACPI core, so the driver does not need to attempt to create a platform device by itself. Accordingly, make it stop doing so. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Link: https://patch.msgid.link/8661724.NyiUUSuA9g@rafael.j.wysocki
2025-12-16platform/x86/intel/hid: Stop creating a platform deviceRafael J. Wysocki-40/+1
Now that "system" devices are represented as platform devices, they are not claimed by the PNP ACPI scan handler any more and the Intel HID platform devices should be created by the ACPI core, so the driver does not need to attempt to create a platform device by itself. Accordingly, make it stop doing so. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Link: https://patch.msgid.link/6115868.MhkbZ0Pkbq@rafael.j.wysocki
2025-12-10Merge tag 'platform-drivers-x86-v6.19-1' of ↵Linus Torvalds-93/+130
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Ilpo Järvinen: - acer-wmi: Add PH16-72, PHN16-72, and PT14-51 fan control support - acpi: platform_profile: Add max-power profile option (power draw limited by the cooling hardware, may exceed battery power draw limit when on AC power) - amd/hsmp: Allow more than one data-fabric per socket - asus-armoury: Add WMI attributes driver to expose miscellaneous WMI functions through fw_attributes (deprecates the custom BIOS features interface through asus-wmi) - asus-wmi: Use brightness_set_blocking() for kbd led - ayaneo-ec: Add Ayaneo Embedded Controller driver - fs/nls: - Fix utf16 to utf8 string conversion when output size restricted - Improve error code consistency for utf8 to utf32 conversions - ideapad-laptop: Fast (Rapid Charge) charge type support - intel/hid: Add Dell Pro Rugged 10/12 tablet to VGBS DMI quirks - intel/pmc: - Arrow Lake telemetry GUID improvements - Add support for Wildcat Lake PMC information - intel_pmc_ipc: Fix ACPI buffer memleak - intel/punit_ipc: Fix memory corruption - intel/vsec: Wildcat Lake PMT telemetry support - lenovo-wmi-gamezone: Map "Extreme" performance mode to max-power - lg-laptop: Add support for the HDAP opregion field - serial-multi-instantiate: Add IRQ_RESOURCE_OPT for IRQ missing projects - thinkpad-t14s-ec: Improve suspend/resume support (lid LEDs, keyboard backlight) - uniwill: Add Uniwill laptop driver - wmi: Move under drivers/platform/wmi as non-x86 WMI support is around the corner and other WMI features will require adding more C files as well - tools/power/x86/intel-speed-select: v1.24 - Check feature status to check if the feature enablement was successful - Reset SST-TF bucket structure to display valid bucket info - Miscellaneous cleanups / refactoring / improvements * tag 'platform-drivers-x86-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (73 commits) tools/power/x86/intel-speed-select: v1.24 release tools/power/x86/intel-speed-select: Reset isst_turbo_freq_info for invalid buckets tools/power/x86/intel-speed-select: Check feature status platform/x86: asus-wmi: use brightness_set_blocking() for kbd led fs/nls: Fix inconsistency between utf8_to_utf32() and utf32_to_utf8() platform/x86: asus-armoury: add support for GA503QR platform/x86: intel_pmc_ipc: fix ACPI buffer memory leak platform/x86: hp-wmi: Order DMI board name arrays platform/x86/intel/hid: Add Dell Pro Rugged 10/12 tablet to VGBS DMI quirks platform: surface: replace use of system_wq with system_percpu_wq platform: x86: replace use of system_wq with system_percpu_wq platform/surface: acpi-notify: add WQ_PERCPU to alloc_workqueue users platform/x86: wmi-gamezone: Add Legion Go 2 Quirks platform/x86: lenovo-wmi-gamezone Use max-power rather than balanced-performance acpi: platform_profile - Add max-power profile option platform/x86/amd/pmf: Use devm_mutex_init() for mutex initialization platform/x86/amd/pmf: Add BIOS_INPUTS_MAX macro to replace hardcoded array size platform/x86: serial-multi-instantiate: Add IRQ_RESOURCE_OPT for IRQ missing projects platform/x86/amd/pmf: Refactor repetitive BIOS output handling platform/x86/uniwill: Add TUXEDO devices ...
2025-12-04Merge tag 'gpio-updates-for-v6.19-rc1' of ↵Linus Torvalds-9/+120
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "There's one new driver, lots of various updates to existing ones, some refactoring support for new models and misc tweaks and fixes. The biggest new feature in GPIO core is adding support for managed, enable-counted sharing of GPIO pins, something that - until now - was only hacked around with the GPIOD_FLAGS_BIT_NONEXCLUSIVE request flag which basically allowed drivers to "fight it out" for the descriptor and provided no synchronization. It was enabled on Qualcomm platforms (and thus is enabled on arm64 defconfig) and I plan on removing GPIOD_FLAGS_BIT_NONEXCLUSIVE once all drivers using it are switched to the new mechanism. GPIO core: - add proper support for shared GPIOs that's aiming to replace the current sharing mechanism (which provides no synchronization ot enable counting) and enable it for Qualcomm platforms - improve the software node GPIO lookup by using the fwnode representation instead of the software node's name which was prone to bugs (GPIO controllers don't have to use the software node's name as their kernel label) - remove the last user of legacy-of-mm-gpiochip.h and drop the header - move closer to removing the legacy gpio_request_one() routine - rename some symbols for consistency - shrink GPIO printk() helpers by reusing existing code - remove some redundant kernel messages - use min() instead of min_t() in GPIO ACPI code - use system_percpu_wq instead of system_wq in GPIO character device code New drivers: - add a driver for the QIXIS FPGA GPIO controller Driver improvements: - use modernized variants of power management macros across a wide array of drivers in order to avoid having to use the __maybe_unused attribute - convert gpio-elkhartlake and reset-gpio to using the auxiliary bus instead of the platform bus as they are not really described in firmware - use lock guards and update symbol prefixes in gpio-mmio - support the bryx radio interface kit in gpio-mpsse + refactor the driver - use software nodes for configuring the reset-gpio driver, including setting up the reference to the shared "reset" pin - check and propagate the return value of gpiod_set_value() to user-space in gpio-virtuser (this was previously not possible as this function returned void) - extend the gpio-regmap helper with more features (bypass cache for aliased inputs, force writes for aliased data registers, add a new configuration parameter) - remove unneeded includes from gpio-aspeed and gpio-latch - add support for Tegra410 to gpio-tegra186 - replace PCI-specific PM with generic device-level PM in gpio-bt8xx - use dynamic GPIO range allocation in gpio-loongson-64bit - improve handling of level-triggered interrupts in gpio-pca953x - add suspend/resume support to gpio-fxl6408 - add support for more models to gpio-menz127 - optimize gpio-mvebu interrupt handling by avoiding unnecessary calls to mvebu_gpio_irq_handler() - make locking more consistent in gpio-grgpio Device-tree bindings: - document new NXP and Microchip models Documentation: - add a comprehensive compatibility and feature list for gpio-pca953x, which is a great addition as it's probably the most commonly used GPIO expander driver - kernel-doc tweaks Late fixes: - use BYTE_CTRL_MODE for 2K2000/3000 models in gpio-loongson" * tag 'gpio-updates-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (80 commits) gpio: loongson: Switch 2K2000/3000 GPIO to BYTE_CTRL_MODE gpio: regmap: fix kernel-doc notation gpio: shared: fix a deadlock gpio: shared-proxy: set suppress_bind_attrs gpio: shared: ignore GPIO hogs when traversing the device tree gpio: shared: ignore special __symbols__ node when traversing device tree gpio: shared: handle the reset-gpios corner case gpio: zynq: Use modern PM macros gpio: xilinx: Use modern PM macros gpio: xgene: Use modern PM macros gpio: uniphier: Use modern PM macros gpio: tqmx86: Use modern PM macros gpio: pch: Use modern PM macros gpio: omap: Use modern PM macros gpio: msc313: Use modern PM macros gpio: mlxbf2: Use modern PM macros gpio: ml-ioh: Use modern PM macros gpio: pl061: Use modern PM macros gpio: htc-egpio: Use modern PM macros gpio: brcmstb: Use modern PM macros ...
2025-12-01Merge branch 'fixes' of into for-nextIlpo Järvinen-11/+14
The current set of DMI board IDs from the fixes branch is required to reorder them in the for-next branch.
2025-11-28platform/x86/intel/hid: Add Dell Pro Rugged 10/12 tablet to VGBS DMI quirksChia-Lin Kao (AceLan)-0/+12
Dell Pro Rugged 10/12 tablets has a reliable VGBS method. If VGBS is not called on boot, the on-screen keyboard won't appear if the device is booted without a keyboard. Call VGBS on boot on thess devices to get the initial state of SW_TABLET_MODE in a reliable way. Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Link: https://patch.msgid.link/20251127070407.656463-1-acelan.kao@canonical.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-11-27Merge tag 'platform-drivers-x86-v6.18-5' of ↵Linus Torvalds-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull platform driver fixes from Ilpo Järvinen: - arm64/thinkpad-t14s-ec: - Fix IRQ race condition - Sleep after EC access - intel/punit_ipc: Fix memory corruption * tag 'platform-drivers-x86-v6.18-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: intel: punit_ipc: fix memory corruption platform: arm64: thinkpad-t14s-ec: sleep after EC access platform: arm64: thinkpad-t14s-ec: fix IRQ race condition
2025-11-24platform/x86: intel: punit_ipc: fix memory corruptionDan Carpenter-1/+1
This passes the address of the pointer "&punit_ipcdev" when the intent was to pass the pointer itself "punit_ipcdev" (without the ampersand). This means that the: complete(&ipcdev->cmd_complete); in intel_punit_ioc() will write to a wrong memory address corrupting it. Fixes: fdca4f16f57d ("platform:x86: add Intel P-Unit mailbox IPC driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/aSCmoBipSQ_tlD-D@stanley.mountain Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-11-21Merge tag 'reset-gpio-for-v6.19-2' of ↵Bartosz Golaszewski-9/+20
https://git.pengutronix.de/git/pza/linux into gpio/for-next Reset/GPIO/swnode changes for v6.19 (v2) * Fix chtwc_int33fe build issue since commit d7cdbbc93c56 ("software node: allow referencing firmware nodes").
2025-11-21platform/x86: intel: chtwc_int33fe: don't dereference swnode argsBartosz Golaszewski-9/+20
Members of struct software_node_ref_args should not be dereferenced directly but set using the provided macros. Commit d7cdbbc93c56 ("software node: allow referencing firmware nodes") changed the name of the software node member and caused a build failure. Remove all direct dereferences of the ref struct as a fix. However, this driver also seems to abuse the software node interface by waiting for a node with an arbitrary name "intel-xhci-usb-sw" to appear in the system before setting up the reference for the I2C device, while the actual software node already exists in the intel-xhci-usb-role-switch module and should be used to set up a static reference. Add a FIXME for a future improvement. Fixes: d7cdbbc93c56 ("software node: allow referencing firmware nodes") Fixes: 53c24c2932e5 ("platform/x86: intel_cht_int33fe: use inline reference properties") Cc: stable@vger.kernel.org Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/all/20251121111534.7cdbfe5c@canb.auug.org.au/ Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2025-11-20Merge tag 'reset-gpio-for-v6.19' of https://git.pengutronix.de/git/pza/linux ↵Bartosz Golaszewski-5/+2
into gpio/for-next Reset/GPIO/swnode changes for v6.19 * Extend software node implementation, allowing its properties to reference existing firmware nodes. * Update the GPIO property interface to use reworked swnode macros. * Rework reset-gpio code to use GPIO lookup via swnode. * Fix spi-cs42l43 driver to work with swnode changes.
2025-11-20Merge tag 'platform-drivers-x86-v6.18-4' of ↵Linus Torvalds-6/+12
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Ilpo Järvinen: "This one has lots of new HW entries which adds to the size in diffstat but the individual changes are simple. Fixes - acer-wmi: Ignore backlight event - alienware-wmi-wmax: Fix quirk match table order & drop redundant entries - amd/pmc: - Add Xbox Ally to spurious 8042 quirk list - Quirk list Lenovo Legion Go 2 NVMe resume - msi-wmi-platform: - Correct GUID to uppercase - GUID is uncleverly copy-pasted from an example so add a DMI whitelist - intel/speed_select_if: PCIBIOS_* return code conversion - intel-uncore-freq & ISST: Fix kernel doc warnings New HW support - alienware-wmi-wmax: - Alienware 16 Aurora support - Alienware M support - Alienware X support - Dell G support - amd/pmc: - ROG Xbox Ally (non-X) support - huaway-wmi: HONOR MagicBoox X16/X14 PrintScreen & YOYO keys - hp-wmi: - Omen 16-wf1xxx fan support - Omen MAX 16-ah0xx fan + thermal profile support - Victus 16-r0 and 16-s0 fan + thermal profile support - intel/hid: Intel Nova Lake support - intel-uncore-freq: - Intel Panther Lake support - Intel Wildcat Lake support - Intel Nova Lake support" * tag 'platform-drivers-x86-v6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (21 commits) platform/x86: intel-uncore-freq: fix all header kernel-doc warnings platform/x86: acer-wmi: Ignore backlight event platform/x86/intel/speed_select_if: Convert PCIBIOS_* return codes to errnos platform/x86/intel/hid: Add Nova Lake support platform/x86: alienware-wmi-wmax: Add AWCC support to Alienware 16 Aurora platform/x86: hp-wmi: Add Omen MAX 16-ah0xx fan support and thermal profile platform/x86: msi-wmi-platform: Fix typo in WMI GUID platform/x86: msi-wmi-platform: Only load on MSI devices platform/x86/amd: pmc: Add Lenovo Legion Go 2 to pmc quirk list platform/x86/amd/pmc: Add spurious_8042 to Xbox Ally platform/x86/amd/pmc: Add support for Van Gogh SoC platform/x86: alienware-wmi-wmax: Add support for the whole "G" family platform/x86: alienware-wmi-wmax: Add support for the whole "X" family platform/x86: alienware-wmi-wmax: Add support for the whole "M" family platform/x86: alienware-wmi-wmax: Drop redundant DMI entries platform/x86: alienware-wmi-wmax: Fix "Alienware m16 R1 AMD" quirk order platform/x86: ISST: isst_if.h: fix all kernel-doc warnings platform/x86: intel-uncore-freq: Add additional client processors platform/x86: hp-wmi: Add Omen 16-wf1xxx fan support platform/x86: huawei-wmi: add keys for HONOR models ...
2025-11-19platform/x86/intel: Introduce Intel Elkhart Lake PSE I/ORaag Jadav-0/+100
Intel Elkhart Lake Programmable Service Engine (PSE) includes two PCI devices that expose two different capabilities of GPIO and Timed I/O as a single PCI function through shared MMIO with below layout. GPIO: 0x0000 - 0x1000 TIO: 0x1000 - 0x2000 This driver enumerates the PCI parent device and creates auxiliary child devices for these capabilities. The actual functionalities are provided by their respective auxiliary drivers. Signed-off-by: Raag Jadav <raag.jadav@intel.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20251112034040.457801-2-raag.jadav@intel.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-11-18platform/x86: intel-uncore-freq: fix all header kernel-doc warningsRandy Dunlap-4/+5
In file uncore-frequency/uncore-frequency-common.h, correct all kernel-doc warnings by adding missing leading " *" to some lines, adding a missing kernel-doc entry, and fixing a name typo. Warning: uncore-frequency-common.h:50 bad line: Storage for kobject attribute elc_low_threshold_percent Warning: uncore-frequency-common.h:52 bad line: Storage for kobject attribute elc_high_threshold_percent Warning: uncore-frequency-common.h:54 bad line: Storage for kobject attribute elc_high_threshold_enable Warning: uncore-frequency-common.h:92 struct member 'min_freq_khz_kobj_attr' not described in 'uncore_data' Warning: uncore-frequency-common.h:92 struct member 'die_id_kobj_attr' not described in 'uncore_data' Fixes: 24b6616355f7 ("platform/x86/intel-uncore-freq: Add efficiency latency control to sysfs interface") Fixes: 416de0246f35 ("platform/x86: intel-uncore-freq: Fix types in sysfs callbacks") Fixes: 247b43fcd872 ("platform/x86/intel-uncore-freq: Add attributes to show die_id") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://patch.msgid.link/20251111060938.1998542-1-rdunlap@infradead.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
generated by cgit v1.2.3 (git 2.46.0) at 2026-03-17 12:25:43 +0000