| Age | Commit message (Collapse) | Author | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
- loongson: Loongson-2K0300 support
- s35390a: nvmem support
- zynqmp: rework calibration
* tag 'rtc-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: ds1390: fix number of bytes read from RTC
rtc: class: Remove duplicate check for alarm
rtc: optee: simplify OP-TEE context match
rtc: interface: Alarm race handling should not discard preceding error
rtc: s35390a: implement nvmem support
rtc: loongson: Add Loongson-2K0300 support
dt-bindings: rtc: loongson: Document Loongson-2K0300 compatible
dt-bindings: rtc: loongson: Correct Loongson-1C interrupts property
dt-bindings: rtc: renesas,rz-rtca3: Add RZ/V2N support
dt-bindings: rtc: cpcap: convert to schema
rtc: zynqmp: use dynamic max and min offset ranges
rtc: zynqmp: rework set_offset
rtc: zynqmp: rework read_offset
rtc: zynqmp: check calibration max value
rtc: zynqmp: correct frequency value
rtc: amlogic-a4: Remove IRQF_ONESHOT
rtc: pcf8563: use correct of_node for output clock
rtc: max31335: use correct CONFIG symbol in IS_REACHABLE()
rtc: nvvrs: Add ARCH_TEGRA to the NV VRS RTC driver
|
|
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The spi_write_then_read() reads 8 bytes starting from
DS1390_REG_SECONDS (== 0x01), so the last byte read would already
be part of the alarm (Tenths and Hundredths of Seconds) feature.
However 7 bytes are engouh -- seconds (0x01), minutes (0x02), hours (0x03),
day (0x04), date (0x05), month/century (0x06) and year (0x07).
Signed-off-by: Andreas Gabriel-Platschek <andi.platschek@gmail.com>
Link: https://patch.msgid.link/20260209053439.313825-1-andi.platschek@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
In __devm_rtc_register_device(), the callee rtc_initialize_alarm()
will check the alarm, there is no need to check in advance,
so remove it.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20260122090031.3871746-1-ruanjinjie@huawei.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Simplify the TEE implementor ID match by returning the boolean
expression directly instead of going through an if/else.
Signed-off-by: Rouven Czerwinski <rouven.czerwinski@linaro.org>
Link: https://patch.msgid.link/20260126-optee-simplify-context-match-v1-3-d4104e526cb6@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Commit 795cda8338ea ("rtc: interface: Fix long-standing race when setting
alarm") should not discard any errors from the preceding validations.
Prior to that commit, if the alarm feature was disabled, or the
set_alarm failed, a meaningful error code would be returned to the
caller for further action.
After, more often than not, the __rtc_read_time will cause a success
return code instead, misleading the caller.
An example of this is when timer_enqueue is called for a rtc-abx080x
device. Since that driver does not clear the alarm feature bit, but
instead relies on the set_alarm operation to return invalid, the discard
of the return code causes very different behaviour; i.e.
hwclock: select() to /dev/rtc0 to wait for clock tick timed out
Fixes: 795cda8338ea ("rtc: interface: Fix long-standing race when setting alarm")
Signed-off-by: Anthony Pighin (Nokia) <anthony.pighin@nokia.com>
Reviewed-by: Esben Haabendal <esben@geanix.com>
Tested-by: Nick Bowler <nbowler@draconx.ca>
Link: https://patch.msgid.link/BN0PR08MB6951415A751F236375A2945683D1A@BN0PR08MB6951.namprd08.prod.outlook.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Pull MIPS updates from Thomas Bogendoerfer:
"Cleanups and fixes"
* tag 'mips_7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (28 commits)
Revert "clk: microchip: core: allow driver to be compiled with COMPILE_TEST"
Revert "clk: microchip: fix typo in reference to a config option"
MIPS: Implement ARCH_HAS_CC_CAN_LINK
MIPS: rb532: Fix MMIO UART resource registration
MIPS: Work around LLVM bug when gp is used as global register variable
MIPS: Loongson64: env: Fixup serial clock-frequency when using LEFI
MIPS: Loongson2ef: Use pcibios_align_resource() to block io range
MIPS: Loongson2ef: Register PCI controller in early stage
clk: microchip: fix typo in reference to a config option
MIPS: Loongson64: dts: fix phy-related definition of LS7A GMAC
clk: microchip: core: allow driver to be compiled with COMPILE_TEST
MIPS: drop unused pic32.h header
watchdog: pic32-wdt: update include to use pic32.h from platform_data
watchdog: pic32-dmt: update include to use pic32.h from platform_data
serial: pic32_uart: update include to use pic32.h from platform_data
rtc: pic32: update include to use pic32.h from platform_data
pinctrl: pic32: update include to use pic32.h from platform_data
mmc: sdhci-pic32: update include to use pic32.h from platform_data
irqchip/irq-pic32-evic: update include to use pic32.h from platform_data
clk: microchip: core: update include to use pic32.h from platform_data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Not much changed in the clk framework this time except the clk.h
consumer API moved the context saving APIs around to fix a build error
in certain configurations.
There was a change to the core framework for CLK_OPS_PARENT_ENABLE
behavior during registration, but it wrecked existing drivers that
didn't expect things to be turned off during clk registration so it
got reverted.
This cycle is really a large collection of new clk drivers, primarily
for Qualcomm SoCs but also for Amlogic, SpacemiT, Google, and Aspeed.
Another big change in here is support for automatic hardware clock
gating on Samsung SoCs where the clks turn on and off when needed.
Ideally more vendors move to this method for better power savings. The
highlights are in the updates section below.
Beyond all the new drivers we have a bunch of cleanups like converting
drivers from divider_round_rate() to divider_determine_rate() and
using scoped for each OF child loops. Otherwise it's the usual data
fixes and plugging reference leaks, etc. that's all pretty ordinary
but not critical enough to fix until the next release.
New Drivers:
- Qualcomm Kaanapali global, tcsr, rpmh, display, gpu, camera, and
video clk controllers
- Qualcomm SM8750 camera clk controllers
- Qualcomm MSM8940 and SDM439 global clk controllers
- Google GS101 Display Process Unit (DPU) clk controllers
- SpacemiT K3 clk controllers
- Amlogic t7 clk controllers
- Aspeed AST2700 clk controllers
Updates:
- Convert clock dividers from round_rate() to determine_rate()
- Fix sparse warnings, kernel-doc warnings, and plug leaked OF refs
- Automatic hardware clk gating on Google GS101 SoCs
- Amlogic s4 video clks
- CAN-FD clks and resets on Renesas RZ/T2H, RZ/N2H, RZ/V2H, and
RZ/V2N
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/T21H and RZ/N2H
- DMAC, interrupt controller (ICU), SPI, and thermal (TSU) clocks and
resets on Renesas RZ/V2N
- More serial (RSCI) clocks and resets on Renesas RZ/V2H and RZ/V2N
- CPU frequency scaling on T-HEAD TH1520"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (165 commits)
clk: aspeed: Add reset for HACE/VIDEO
dt-bindings: clock: aspeed: Add VIDEO reset definition
clk: aspeed: add AST2700 clock driver
MAINTAINERS: Add entry for ASPEED clock drivers.
clk: aspeed: Move the existing ASPEED clk drivers into aspeed subdirectory.
Revert "clk: Respect CLK_OPS_PARENT_ENABLE during recalc"
clk: Disable KUNIT_UML_PCI
dt-bindings: clk: rs9: Fix DIF pattern match
clk: rs9: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
clk: rs9: Reserve 8 struct clk_hw slots for for 9FGV0841
clk: qcom: sm8750: Constify 'qcom_cc_desc' in SM8750 camcc
clk: zynqmp: pll: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: zynqmp: divider: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: mediatek: Fix error handling in runtime PM setup
clk: mediatek: don't select clk-mt8192 for all ARM64 builds
clk: mediatek: Add mfg_eb as parent to mt8196 mfgpll clocks
clk: mediatek: Refactor pllfh registration to pass device
clk: mediatek: Pass device to clk_hw_register for PLLs
clk: mediatek: Refactor pll registration to pass device
clk: Respect CLK_OPS_PARENT_ENABLE during recalc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and some changes to GPIO core but mostly
just GPIO driver updates across a wide array of files, adding support
for new models as well as various refactoring changes. Nothing
controversial and everything has spent a good measure of time in
linux-next.
GPIOLIB core:
- shrink the GPIO bus driver stub code
- rework software node support for "undefined" software nodes
- provide and use devm_fwnode_gpiod_get_optional()
- only compile the OF quirk for MT2701 when needed
New drivers:
- add the GPIO driver for ROHM bd72720
- add the gpio-line-mux driver providing 1-to-many mapping for a
single real GPIO
Driver changes:
- refactor gpio-pca9570: use lock guard, add missing headers, use
devres consistently
- add support for a new model (G7 Aspeed sgpiom) to the aspeed-sgpio
driver along with some prerequisite refactoring
- use device_get_match_data() where applicable and save some lines
- add support for more models to gpio-cadence
- add the compatible property to reset-gpio and use it in shared GPIO
management
- drop unnecessary use of irqd_get_trigger_type() in gpio-max77759
- add support for a new variant to gpio-pca953x
- extend build coverage with COMPILE_TEST for more drivers
- constify configfs structures in gpio-sim and gpio-virtuser
- add support for the K3 SoC to gpio-spacemit
- implement the missing .get_direction() callback in gpio-max77620
- add support for Tegra264 to gpio-tegra186
- drop unneeded MODULE_ALIAS() from gpio-menz127
DT bindings:
- document support for the opencores GPIO controller in gpio-mmio
- document new variants for gpio-pca953x
Documentation:
- extensively describe interrupt source detection for gpio-pca953x
and add more models to the list of supported variants"
* tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
gpio: tegra186: Add support for Tegra264
dt-bindings: gpio: Add Tegra264 support
gpio: spacemit-k1: Use PDR for pin direction, not SDR/CDR
gpio: max77620: Implement .get_direction() callback
gpio: aspeed-sgpio: Support G7 Aspeed sgpiom controller
dt-bindings: gpio: aspeed,sgpio: Support ast2700
gpio: aspeed-sgpio: Convert IRQ functions to use llops callbacks
gpio: aspeed-sgpio: Create llops to handle hardware access
gpio: aspeed-sgpio: Remove unused bank name field
gpio: aspeed-sgpio: Change the macro to support deferred probe
regulator: bd71815: switch to devm_fwnode_gpiod_get_optional
gpiolib: introduce devm_fwnode_gpiod_get_optional() wrapper
gpio: mmio: Add compatible for opencores GPIO
dt-bindings: gpio-mmio: Correct opencores GPIO
gpio: pca9570: use lock guards
gpio: pca9570: Don't use "proxy" headers
gpio: pca9570: Use devm_mutex_init() for mutex initialization
MAINTAINERS: Add ROHM BD72720 PMIC
power: supply: bd71828-power: Support ROHM BD72720
power: supply: bd71828: Support wider register addresses
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"There's a bunch of new drivers here, plus a lot of hardening for the
supply resolution code which allow us to support systems where we have
two PMICs each of which has regulators supplied by the other. This did
work a long time ago but got broken as part of improved integration
with the device model, it's fairly rare so nobody noticed.
- Improvements for supply handling from André Draszik to allow
systems with two PMICs with supply/consumer relationships in both
directions to instantiate.
- New drivers for Maxim MAX776750, Realtek RT8902, Samsung S2MPG11,
Texas Instuments TPS65185.
This have also pulls in some MFD updates which are build dependencies
for the Samsung S2MPG11 support"
* tag 'regulator-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (42 commits)
regulator: s2mps11: more descriptive gpio consumer name
regulator: s2mps11: add S2MPG11 regulator
regulator: s2mps11: refactor S2MPG10 regulator macros for S2MPG11 reuse
regulator: s2mps11: refactor S2MPG10 ::set_voltage_time() for S2MPG11 reuse
regulator: s2mps11: add S2MPG10 regulator
regulator: s2mps11: refactor handling of external rail control
regulator: s2mps11: update node parsing (allow -supply properties)
regulator: s2mps11: place constants on right side of comparison tests
regulator: s2mps11: use dev_err_probe() where appropriate
regulator: s2mps11: drop two needless variable initialisations
regulator: add REGULATOR_LINEAR_VRANGE macro
regulator: dt-bindings: add s2mpg11-pmic regulators
regulator: dt-bindings: add s2mpg10-pmic regulators
dt-bindings: firmware: google,gs101-acpm-ipc: convert regulators to lowercase
mfd: sec: Add support for S2MPG11 PMIC via ACPM
mfd: sec: s2mpg10: Reorder regulators for better probe performance
dt-bindings: mfd: Add samsung,s2mpg11-pmic
dt-bindings: mfd: samsung,s2mpg10-pmic: Link to its regulators
dt-bindings: mfd: samsung,s2mps11: Split s2mpg10-pmic into separate file
mfd: sec: Drop now unused struct sec_pmic_dev::irq_data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are are a number of to firmware drivers, in particular the TEE
subsystem:
- a bus callback for TEE firmware that device drivers can register to
- sysfs support for tee firmware information
- minor updates to platform specific TEE drivers for AMD, NXP,
Qualcomm and the generic optee driver
- ARM SCMI firmware refactoring to improve the protocol discover
among other fixes and cleanups
- ARM FF-A firmware interoperability improvements
The reset controller and memory controller subsystems gain support for
additional hardware platforms from Mediatek, Renesas, NXP, Canaan and
SpacemiT.
Most of the other changes are for random drivers/soc code. Among a
number of cleanups and newly added hardware support, including:
- Mediatek MT8196 DVFS power management and mailbox support
- Qualcomm SCM firmware and MDT loader refactoring, as part of the
new Glymur platform support.
- NXP i.MX9 System Manager firmware support for accessing the syslog
- Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD
SoCs"
* tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (171 commits)
bus: fsl-mc: fix an error handling in fsl_mc_device_add()
reset: spacemit: Add SpacemiT K3 reset driver
reset: spacemit: Extract common K1 reset code
reset: Create subdirectory for SpacemiT drivers
dt-bindings: soc: spacemit: Add K3 reset support and IDs
reset: canaan: k230: drop OF dependency and enable by default
reset: rzg2l-usbphy-ctrl: Add suspend/resume support
reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits()
reset: gpio: check the return value of gpiod_set_value_cansleep()
reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV
reset: imx8mp-audiomix: Extend the driver usage
reset: imx8mp-audiomix: Switch to using regmap API
reset: imx8mp-audiomix: Drop unneeded macros
soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove
soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses
soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID
soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support
soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create()
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
...
|
|
Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.
The flag also prevents force-threading of the primary handler and the
irq-core will warn about this.
Remove IRQF_ONESHOT from irqflags.
Fixes: c89ac9182ee29 ("rtc: support for the Amlogic on-chip RTC")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20260128095540.863589-13-bigeasy@linutronix.de
|
|
This RTC has one "free" register which can be used to store arbitrary
data. Expose it as a nvmem resource in Linux.
Signed-off-by: Lorenz Brun <lorenz@monogon.tech>
Link: https://patch.msgid.link/20251223125728.346073-1-lorenz@monogon.tech
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The Loongson-2K0300's rtc hardware design is similar to that of the
Loongson-1B, but it does not support the alarm feature.
Introduce `LOONGSON_RTC_ALARM_WORKAROUND`, which indicates a chip that
does not support the alarm feature, and rewrite the related logic in
`loongson_rtc_alarm_setting()`.
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/abff68dda2fe6a6601a9e58b31e278d941297fce.1768616276.git.zhoubinbin@loongson.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Use the linux/platform_data/pic32.h include instead of
asm/mach-pic32/pic32.h so that the asm variant can be dropped. This
is in preparation for allowing some drivers to be compiled on other
architectures with COMPILE_TEST enabled.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Maximum and minimum offsets in ppb that can be handled are dependent on
the rtc clock frequency and what can fit in the 16-bit register field.
Reviewed-by: Harini T <harini.t@amd.com>
Tested-by: Harini T <harini.t@amd.com>
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20260122-zynqmp-rtc-updates-v4-5-d4edb966b499@vaisala.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
set_offset was using remainder of do_div as tick_mult which resulted in
wrong offset. Calibration value also assumed builtin calibration default.
Update fract_offset to correctly calculate the value for
negative offset and replace the for loop with division.
Tested-by: Harini T <harini.t@amd.com>
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Reviewed-by: Harini T <harini.t@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20260122-zynqmp-rtc-updates-v4-4-d4edb966b499@vaisala.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
read_offset() was using static frequency for determining
the tick offset. It was also using remainder from do_div()
operation as tick_mult value which caused the offset to be
incorrect.
At the same time, rework function to improve readability.
It is worth noting, that due to rounding errors, the offset
readback will differ slightly for positive and negative
calibration values.
Reviewed-by: Harini T <harini.t@amd.com>
Tested-by: Harini T <harini.t@amd.com>
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20260122-zynqmp-rtc-updates-v4-3-d4edb966b499@vaisala.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Enable check to not overflow the calibration
max value.
Reviewed-by: Harini T <harini.t@amd.com>
Tested-by: Harini T <harini.t@amd.com>
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20260122-zynqmp-rtc-updates-v4-2-d4edb966b499@vaisala.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Fix calibration value in case a clock reference is provided.
The actual calibration value written into register is
frequency - 1.
Reviewed-by: Harini T <harini.t@amd.com>
Tested-by: Harini T <harini.t@amd.com>
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20260122-zynqmp-rtc-updates-v4-1-d4edb966b499@vaisala.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.
The flag also disallows force-threading of the primary handler and the
irq-core will warn about this.
Remove IRQF_ONESHOT from irqflags.
Fixes: c89ac9182ee29 ("rtc: support for the Amlogic on-chip RTC")
Reviewed-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260128095540.863589-13-bigeasy@linutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The core driver now exposes the alarm IRQ as a resource, so we can drop
the lookup from here to simplify the code and make adding support for
additional variants easier in this driver.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://patch.msgid.link/20260113-s5m-alarm-v3-2-855a19db1277@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
When switching to regmap, the i2c_client pointer was removed from struct
pcf8563 so this function switched to using the RTC device instead. But
the RTC device is a child of the original I2C device and does not have
an associated of_node.
Reference the correct device's of_node to ensure that the output clock
can be found when referenced by other devices and so that the override
clock name is read correctly.
Cc: stable@vger.kernel.org
Fixes: 00f1bb9b8486b ("rtc: pcf8563: Switch to regmap")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://patch.msgid.link/20260108184749.3413348-1-jkeeping@inmusicbrands.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
IS_REACHABLE() is meant to be used with full symbol names from a kernel
.config file, not the shortened symbols used in Kconfig files, so
change HWMON to CONFIG_HWMON in 3 places.
Fixes: dedaf03b99d6 ("rtc: max31335: add driver support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20260108045432.2705691-1-rdunlap@infradead.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The NV VRS RTC driver currently is only supported on the
Tegra platform so add a dep for ARCH_TEGRA and compile test
so it doesn't show up universally across all arches/platforms.
Fixes: 9d6d6b06933c8 ("rtc: nvvrs: add NVIDIA VRS RTC device driver")
Cc: Shubhi Garg <shgarg@nvidia.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20251222035651.433603-1-pbrobinson@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The BD72720 has similar RTC block as a few other ROHM PMICs.
Add support for BD72720 RTC.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://patch.msgid.link/3241773f0f8e8d8e591a8e948495686cfdee4875.1765804226.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The tee bus got dedicated callbacks for probe and remove. Make use of
these. This fixes a runtime warning about the driver needing to be
converted to the bus methods.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
The tee subsystem recently got a set of dedicated functions to register
(and unregister) a tee driver. Make use of them. These care for setting the
driver's bus (so the explicit assignment can be dropped) and the driver
owner (which is an improvement this driver benefits from).
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- stop setting max_user_freq from the individual drivers as this has
not been hardware related for a while
New drivers:
- Andes ATCRTC100
- Apple SMC
- Nvidia VRS
Drivers:
- renesas-rtca3: add RZ/V2H support
- tegra: add ACPI support"
* tag 'rtc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
rtc: spacemit: MFD_SPACEMIT_P1 as dependencies
rtc: atcrtc100: Fix signedness bug in probe()
rtc: max31335: Fix ignored return value in set_alarm
rtc: gamecube: Check the return value of ioremap()
Documentation: ABI: testing: Fix "upto" typo in rtc-cdev
rtc: Add new rtc-macsmc driver for Apple Silicon Macs
dt-bindings: rtc: Add Apple SMC RTC
MAINTAINERS: drop unneeded file entry in NVIDIA VRS RTC DRIVER
rtc: isl12026: Add id_table
rtc: renesas-rtca3: Add support for multiple reset lines
dt-bindings: rtc: renesas,rz-rtca3: Add RZ/V2H support
rtc: tegra: Replace deprecated SIMPLE_DEV_PM_OPS
rtc: tegra: Add ACPI support
rtc: tegra: Use devm_clk_get_enabled() in probe
rtc: Kconfig: add MC34708 to mc13xxx help text
rtc: s35390a: use u8 instead of char for register buffer
rtc: nvvrs: add NVIDIA VRS RTC device driver
dt-bindings: rtc: Document NVIDIA VRS RTC
rtc: atcrtc100: Add ATCRTC100 RTC driver
MAINTAINERS: Add entry for ATCRTC100 RTC driver
...
|
|
RTC_DRV_SPACEMIT_P1 is a subdevice of P1 and should depend on
MFD_SPACEMIT_P1 rather than selecting it directly. Using 'select'
does not always respect the parent's dependencies, so 'depends on'
is the safer and more correct choice.
Additionally, the default value depends on MFD_SPACEMIT_P1 rather
than ARCH_SPACEMIT.
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Acked-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20251118-p1-kconfig-fix-v3-2-8839c5ac5db3@linux.spacemit.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The "atcrtc_dev->alarm_irq" variable is an unsigned int but it needs to
be signed for the error handling to work. Use the "ret" variable
instead.
Fixes: 7adca706fe16 ("rtc: atcrtc100: Add ATCRTC100 RTC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aRxPGBEX8hbY6sjV@stanley.mountain
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Return the result from regmap_update_bits() instead of ignoring it
and always returning 0.
Fixes: dedaf03b99d6 ("rtc: max31335: add driver support")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20251128-max31335-handler-error-v1-1-6b6f7f78dbda@analog.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The function ioremap() in gamecube_rtc_read_offset_from_sram() can fail
and return NULL, which is dereferenced without checking, leading to a
NULL pointer dereference.
Add a check for the return value of ioremap() and return -ENOMEM on
failure.
Fixes: 86559400b3ef ("rtc: gamecube: Add a RTC driver for the GameCube, Wii and Wii U")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Link Mauve <kernel@linkmauve.fr>
Link: https://patch.msgid.link/20251126080625.1752-1-vulab@iscas.ac.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Apple Silicon Macs (M1, etc.) have an RTC that is part of the PMU IC,
but most of the PMU functionality is abstracted out by the SMC.
On T600x machines, the RTC counter must be accessed via the SMC to
get full functionality, and it seems likely that future machines
will move towards making SMC handle all RTC functionality.
The SMC RTC counter access is implemented on all current machines
as of the time of this writing, on firmware 12.x. However, the RTC
offset (needed to set the time) is still only accessible via direct
PMU access. To handle this, we expose the RTC offset as an NVMEM
cell from the SPMI PMU device node, and this driver consumes that
cell and uses it to compute/set the current time.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Sven Peter <sven@kernel.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20251112-macsmc-subdevs-v5-3-728e4b91fe81@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add i2c id_table for isl12026 rtc.
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Link: https://patch.msgid.link/2025119-54859-2010914@bhairav-test.ee.iitb.ac.in
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Switch from devm_reset_control_get_shared() to
devm_reset_control_array_get_shared() when retrieving resets.
The RZ/V2H SoC requires two resets for the RTC block instead of one,
so this will allow to handle multiple resets without additional changes.
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251107210706.45044-3-ovidiu.panait.rb@renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Replace deprecated SIMPLE_DEV_PM_OPS with DEFINE_SIMPLE_DEV_PM_OPS macro
and use pm_sleep_ptr() to initialize pm_ops. This also allows us to drop
the checks for CONFIG_PM_SLEEP.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20251024064952.775883-3-kkartik@nvidia.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add ACPI support for Tegra RTC, which is available on Tegra241 and
Tegra410. Both Tegra241 and Tegra410 use the same ACPI ID 'NVDA0280'.
When ACPI boot is used, the RTC clock is configured by UEFI before
the kernel boots. On device-tree boot, the probe must fail if clocks are
not provided in the device-tree.
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20251024064952.775883-2-kkartik@nvidia.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Simplify clock management by replacing devm_clk_get() and manual clock
enable/disable with devm_clk_get_enabled(). This also simplifies the
error handling logic. Also remove tegra_rtc_remove() as the clock will
automatically be disabled when the device is unbound from the bus.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20251024064952.775883-1-kkartik@nvidia.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
MC34708 is one of the three mfd devices supported by DRV_MC13XXX.
Update Kconfig accordingly.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Link: https://patch.msgid.link/20251011062605.13591-1-akurz@blala.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The register buffer in s35390a_get_reg() was previously defined as
`char *buf`. This is not ideal since register data represents raw
binary values rather than textual data.
Switch the type to `u8 *buf` to better reflect its intended usage and
to avoid potential issues with sign extension when handling register
values on platforms where `char` is signed by default.
This change improves type safety and makes the code consistent with
other RTC drivers that operate on raw register data.
Signed-off-by: Nick Huang <sef1548@gmail.com>
Link: https://patch.msgid.link/20250920174224.108795-1-sef1548@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
This code is intended to operate on the CTRL1 register, but ctrl[1] is
actually CTRL2. Correctly, ctrl[0] is CTRL1.
Signed-off-by: Yuta Hayama <hayama@lineo.co.jp>
Fixes: 71af91565052 ("rtc: rx8025: fix 12/24 hour mode detection on RX-8035")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/eae5f479-5d28-4a37-859d-d54794e7628c@lineo.co.jp
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add support for NVIDIA VRS (Voltage Regulator Specification) RTC device
driver. NVIDIA VRS is a Power Management IC (PMIC) that implements a
power sequencing solution with I2C interface. The device includes RTC
which provides functionality to get/set system time, retain system
time across boot, wake system from suspend and shutdown state.
Supported platforms:
- NVIDIA Jetson AGX Orin Developer Kit
- NVIDIA IGX Orin Development Kit
- NVIDIA Jetson Orin NX Developer Kit
- NVIDIA Jetson Orin Nano Developer Kit
Signed-off-by: Shubhi Garg <shgarg@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20251007135738.487694-4-shgarg@nvidia.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
RTC driver for Andes ATCRTC100 Real-Time Clock.
Signed-off-by: CL Wang <cl634@andestech.com>
Link: https://patch.msgid.link/20250915031439.2680364-4-cl634@andestech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
max_user_freq has not been related to the hardware RTC since commit
6610e0893b8b ("RTC: Rework RTC code to use timerqueue for events"). Stop
setting it from individual driver to avoid confusing new contributors.
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://patch.msgid.link/20251101-max_user_freq-v1-11-c9a274fd6883@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
max_user_freq has not been related to the hardware RTC since commit
6610e0893b8b ("RTC: Rework RTC code to use timerqueue for events"). Stop
setting it from individual driver to avoid confusing new contributors.
Link: https://patch.msgid.link/20251101-max_user_freq-v1-10-c9a274fd6883@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
max_user_freq has not been related to the hardware RTC since commit
6610e0893b8b ("RTC: Rework RTC code to use timerqueue for events"). Stop
setting it from individual driver to avoid confusing new contributors.
Link: https://patch.msgid.link/20251101-max_user_freq-v1-9-c9a274fd6883@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
