| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
After DME Link Startup, the error return value is set to the MIPI UniPro
GenericErrorCode which can be 0 (SUCCESS) or 1 (FAILURE). Upon failure
during driver probe, the error code 1 is propagated back to the driver
probe function which must return a negative value to indicate an error,
but 1 is not negative, so the probe is considered to be successful even
though it failed. Subsequently, removing the driver results in an oops
because it is not in a valid state.
This happens because none of the callers of ufshcd_init() expect a
non-negative error code.
Fix the return value and documentation to match actual usage.
Fixes: 69f5eb78d4b0 ("scsi: ufs: core: Move the ufshcd_device_init(hba, true) call")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251024085918.31825-5-adrian.hunter@intel.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufshcd_link_startup() has a facility (link_startup_again) to issue
DME_LINKSTARTUP a 2nd time even though the 1st time was successful.
Some older hardware benefits from that, however the behaviour is
non-standard, and has been found to cause link startup to be unreliable
for some Intel Alder Lake based host controllers.
Add UFSHCD_QUIRK_PERFORM_LINK_STARTUP_ONCE to suppress
link_startup_again, in preparation for setting the quirk for affected
controllers.
Fixes: 7dc9fb47bc9a ("scsi: ufs: ufs-pci: Add support for Intel ADL")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251024085918.31825-3-adrian.hunter@intel.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Patch "Make HID attributes visible" is needed for older kernel versions
(e.g. 6.12) where ufs_get_device_desc() is called from ufshcd_probe_hba().
In these older kernel versions ufshcd_get_device_desc() may be called
after the sysfs attributes have been added. In the upstream kernel however
ufshcd_get_device_desc() is called before ufs_sysfs_add_nodes(). See also
the ufshcd_device_params_init() call from ufshcd_init(). Hence, calling
sysfs_update_group() is not necessary.
See also commit 69f5eb78d4b0 ("scsi: ufs: core: Move the
ufshcd_device_init(hba, true) call") in kernel v6.13.
This patch fixes the following kernel warning:
sysfs: cannot create duplicate filename '/devices/platform/3c2d0000.ufs/hid'
Workqueue: async async_run_entry_fn
Call trace:
dump_backtrace+0xfc/0x17c
show_stack+0x18/0x28
dump_stack_lvl+0x40/0x104
dump_stack+0x18/0x3c
sysfs_warn_dup+0x6c/0xc8
internal_create_group+0x1c8/0x504
sysfs_create_groups+0x38/0x9c
ufs_sysfs_add_nodes+0x20/0x58
ufshcd_init+0x1114/0x134c
ufshcd_pltfrm_init+0x728/0x7d8
ufs_google_probe+0x30/0x84
platform_probe+0xa0/0xe0
really_probe+0x114/0x454
__driver_probe_device+0xa4/0x160
driver_probe_device+0x44/0x23c
__device_attach_driver+0x15c/0x1f4
bus_for_each_drv+0x10c/0x168
__device_attach_async_helper+0x80/0xf8
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
ufshcd 3c2d0000.ufs: ufs_sysfs_add_nodes: sysfs groups creation failed (err = -17)
Cc: Daniel Lee <chullee@google.com>
Cc: Peter Wang <peter.wang@mediatek.com>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Fixes: bb7663dec67b ("scsi: ufs: sysfs: Make HID attributes visible")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Fixes: bb7663dec67b ("scsi: ufs: sysfs: Make HID attributes visible")
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://patch.msgid.link/20251028222433.1108299-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Some systems, e.g. Rock 4D, have a pluggable UFS module. Link startup
fails systematically on these systems. If no UFS module has been plugged
in, more than fourty lines are logged after the "link startup failed"
message. Avoid this by reducing link startup failure logging.
An intended side effect of this patch is that scsi_host_busy() is not
called before scsi_add_host() is called.
Commit 995412e23bb2 ("blk-mq: Replace tags->lock with SRCU for tag
iterators") introduced a regression - the warning shown below is
triggered during every boot. This patch fixes that regression.
Call trace:
__srcu_read_lock+0x30/0x80 (P)
blk_mq_tagset_busy_iter+0x44/0x300
scsi_host_busy+0x38/0x70
ufshcd_print_host_state+0x34/0x1bc
ufshcd_link_startup.constprop.0+0xe4/0x2e0
ufshcd_init+0x944/0xf80
ufshcd_pltfrm_init+0x504/0x820
ufs_rockchip_probe+0x2c/0x88
platform_probe+0x5c/0xa4
really_probe+0xc0/0x38c
__driver_probe_device+0x7c/0x150
driver_probe_device+0x40/0x120
__driver_attach+0xc8/0x1e0
bus_for_each_dev+0x7c/0xdc
driver_attach+0x24/0x30
bus_add_driver+0x110/0x230
driver_register+0x68/0x130
__platform_driver_register+0x20/0x2c
ufs_rockchip_pltform_init+0x1c/0x28
do_one_initcall+0x60/0x1e0
kernel_init_freeable+0x248/0x2c4
kernel_init+0x20/0x140
ret_from_fork+0x10/0x20
Reported-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Closes: https://lore.kernel.org/linux-block/pnezafputodmqlpumwfbn644ohjybouveehcjhz2hmhtcf2rka@sdhoiivync4y/
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251014200118.3390839-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufs_sysfs_add_nodes() is called concurrently with ufs_get_device_desc().
This may cause the following code to be called before
ufs_sysfs_add_nodes():
sysfs_update_group(&hba->dev->kobj, &ufs_sysfs_hid_group);
If this happens, ufs_sysfs_add_nodes() triggers a kernel warning and
fails. Fix this by calling ufs_sysfs_add_nodes() before SCSI LUNs are
scanned since the sysfs_update_group() call happens from the context of
thread that executes ufshcd_async_scan(). This patch fixes the following
kernel warning:
sysfs: cannot create duplicate filename '/devices/platform/3c2d0000.ufs/hid'
Workqueue: async async_run_entry_fn
Call trace:
dump_backtrace+0xfc/0x17c
show_stack+0x18/0x28
dump_stack_lvl+0x40/0x104
dump_stack+0x18/0x3c
sysfs_warn_dup+0x6c/0xc8
internal_create_group+0x1c8/0x504
sysfs_create_groups+0x38/0x9c
ufs_sysfs_add_nodes+0x20/0x58
ufshcd_init+0x1114/0x134c
ufshcd_pltfrm_init+0x728/0x7d8
ufs_google_probe+0x30/0x84
platform_probe+0xa0/0xe0
really_probe+0x114/0x454
__driver_probe_device+0xa4/0x160
driver_probe_device+0x44/0x23c
__device_attach_driver+0x15c/0x1f4
bus_for_each_drv+0x10c/0x168
__device_attach_async_helper+0x80/0xf8
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
ufshcd 3c2d0000.ufs: ufs_sysfs_add_nodes: sysfs groups creation failed (err = -17)
Cc: Daniel Lee <chullee@google.com>
Fixes: bb7663dec67b ("scsi: ufs: sysfs: Make HID attributes visible")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251014200118.3390839-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A value of an attribute will be initialized at ufshcd_dme_get_attr().
There is no need to initialize a tx_lanes.
Signed-off-by: Wonkon Kim <wkon.kim@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251020061539.28661-3-wkon.kim@samsung.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If ufshcd_send_cmd() fails, *mib_val may have a garbage value. It can
get an unintended value of an attribute.
Make ufshcd_dme_get_attr() always initialize *mib_val.
Fixes: 12b4fdb4f6bc ("[SCSI] ufs: add dme configuration primitives")
Signed-off-by: Wonkon Kim <wkon.kim@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251020061539.28661-2-wkon.kim@samsung.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix the issue where host_sem is not released due to a new return path in
commit f966e02ae521 ("scsi: ufs: core: Fix runtime suspend error
deadlock").
Check pm_op_in_progress before acquiring hba->host_sem to prevent
deadlocks and ensure proper resource management during error
handling. Add comment for use ufshcd_rpm_get_noresume() to safely
perform link recovery without interfering with ongoing PM operations.
Fixes: f966e02ae521 ("scsi: ufs: core: Fix runtime suspend error deadlock")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251008065651.1589614-2-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI fixes from James Bottomley:
"Fixes only in drivers (ufs, mvsas, qla2xxx, target) that came in just
before or during the merge window.
The most important one is the qla2xxx which reverts a conversion to
fix flexible array member warnings, that went up in this merge window
but which turned out on further testing to be causing data corruption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Include UTP error in INT_FATAL_ERRORS
scsi: ufs: sysfs: Make HID attributes visible
scsi: mvsas: Fix use-after-free bugs in mvs_work_queue
scsi: ufs: core: Fix PM QoS mutex initialization
scsi: ufs: core: Fix runtime suspend error deadlock
Revert "scsi: qla2xxx: Fix memcpy() field-spanning write issue"
scsi: target: target_core_configfs: Add length check to avoid buffer overflow
|
|
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, mpi3mr, lpfc, pm80xx, mpt3sas) plus
assorted cleanups and fixes.
The only core update is to sd.c and is mostly cosmetic"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (105 commits)
scsi: MAINTAINERS: Update FC element owners
scsi: mpt3sas: Update driver version to 54.100.00.00
scsi: mpt3sas: Add support for 22.5 Gbps SAS link rate
scsi: mpt3sas: Suppress unnecessary IOCLogInfo on CONFIG_INVALID_PAGE
scsi: mpt3sas: Fix crash in transport port remove by using ioc_info()
scsi: ufs: ufs-qcom: Add support for limiting HS gear and rate
scsi: ufs: pltfrm: Add DT support to limit HS gear and gear rate
scsi: ufs: ufs-qcom: Remove redundant re-assignment to hs_rate
scsi: ufs: dt-bindings: Document gear and rate limit properties
scsi: ufs: core: Fix data race in CPU latency PM QoS request handling
scsi: libfc: Fix potential buffer overflow in fc_ct_ms_fill()
scsi: storvsc: Remove redundant ternary operators
scsi: ufs: core: Change MCQ interrupt enable flow
scsi: smartpqi: Replace kmalloc() + copy_from_user() with memdup_user()
scsi: hpsa: Replace kmalloc() + copy_from_user() with memdup_user()
scsi: hpsa: Fix potential memory leak in hpsa_big_passthru_ioctl()
scsi: lpfc: Copyright updates for 14.4.0.11 patches
scsi: lpfc: Update lpfc version to 14.4.0.11
scsi: lpfc: Convert debugfs directory counts from atomic to unsigned int
scsi: lpfc: Clean up extraneous phba dentries
...
|
|
Call sysfs_update_group() after reading the device descriptor to ensure
the HID sysfs attributes are visible when the feature is supported.
Fixes: ae7795a8c258 ("scsi: ufs: core: Add HID support")
Signed-off-by: Daniel Lee <chullee@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
hba->pm_qos_mutex is used very early as a part of ufshcd_init(), so it
need to be initialized before that call. This fixes the following
warning:
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: kernel/locking/mutex.c:577 at __mutex_lock+0x268/0x894, CPU#4: kworker/u32:4/72
Modules linked in:
CPU: 4 UID: 0 PID: 72 Comm: kworker/u32:4 Not tainted 6.17.0-rc7-next-20250926+ #11223 PREEMPT
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
Workqueue: events_unbound deferred_probe_work_func
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __mutex_lock+0x268/0x894
lr : __mutex_lock+0x268/0x894
...
Call trace:
__mutex_lock+0x268/0x894 (P)
mutex_lock_nested+0x24/0x30
ufshcd_pm_qos_update+0x30/0x78
ufshcd_setup_clocks+0x2d4/0x3c4
ufshcd_init+0x234/0x126c
ufshcd_pltfrm_init+0x62c/0x82c
ufs_qcom_probe+0x20/0x58
platform_probe+0x5c/0xac
really_probe+0xbc/0x298
__driver_probe_device+0x78/0x12c
driver_probe_device+0x40/0x164
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x80/0xdc
__device_attach+0xa8/0x1b0
device_initial_probe+0x14/0x20
bus_probe_device+0xb0/0xb4
deferred_probe_work_func+0x8c/0xc8
process_one_work+0x208/0x60c
worker_thread+0x244/0x388
kthread+0x150/0x228
ret_from_fork+0x10/0x20
irq event stamp: 57267
hardirqs last enabled at (57267): [<ffffd761485e868c>] _raw_spin_unlock_irqrestore+0x74/0x78
hardirqs last disabled at (57266): [<ffffd76147b13c44>] clk_enable_lock+0x7c/0xf0
softirqs last enabled at (56270): [<ffffd7614734446c>] handle_softirqs+0x4c4/0x4dc
softirqs last disabled at (56265): [<ffffd76147290690>] __do_softirq+0x14/0x20
---[ end trace 0000000000000000 ]---
Fixes: 79dde5f7dc7c ("scsi: ufs: core: Fix data race in CPU latency PM QoS request handling")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Message-Id: <20250929112730.3782765-1-m.szyprowski@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Resolve the deadlock issue during runtime suspend when an error triggers
the error handler. Prevent the deadlock by checking pm_op_in_progress
and performing a quick recovery. This approach ensures that the error
handler does not wait indefinitely for runtime PM to resume, allowing
runtime suspend to proceed smoothly.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Message-Id: <20250926012940.3933367-1-peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The cpu_latency_qos_add/remove/update_request interfaces lack internal
synchronization by design, requiring the caller to ensure thread safety.
The current implementation relies on the 'pm_qos_enabled' flag, which is
insufficient to prevent concurrent access and cannot serve as a proper
synchronization mechanism. This has led to data races and list
corruption issues.
A typical race condition call trace is:
[Thread A]
ufshcd_pm_qos_exit()
--> cpu_latency_qos_remove_request()
--> cpu_latency_qos_apply();
--> pm_qos_update_target()
--> plist_del <--(1) delete plist node
--> memset(req, 0, sizeof(*req));
--> hba->pm_qos_enabled = false;
[Thread B]
ufshcd_devfreq_target
--> ufshcd_devfreq_scale
--> ufshcd_scale_clks
--> ufshcd_pm_qos_update <--(2) pm_qos_enabled is true
--> cpu_latency_qos_update_request
--> pm_qos_update_target
--> plist_del <--(3) plist node use-after-free
Introduces a dedicated mutex to serialize PM QoS operations, preventing
data races and ensuring safe access to PM QoS resources, including sysfs
interface reads.
Fixes: 2777e73fc154 ("scsi: ufs: core: Add CPU latency QoS support for UFS driver")
Signed-off-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Huan Tang <tanghuan@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move the MCQ interrupt enable process to
ufshcd_mcq_make_queues_operational() to ensure that interrupts are set
correctly when making queues operational, similar to
ufshcd_make_hba_operational(). This change addresses the issue where
ufshcd_mcq_make_queues_operational() was not fully operational due to
missing interrupt enablement.
This change only affects host drivers that call
ufshcd_mcq_make_queues_operational(), i.e. ufs-mediatek.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Some Kioxia UFS 4 devices do not support the qTimestamp attribute. Set
the UFS_DEVICE_QUIRK_NO_TIMESTAMP_SUPPORT for these devices such that no
error messages appear in the kernel log about failures to set the
qTimestamp attribute.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Tested-by: Nitin Rawat <quic_nitirawa@quicinc.com> # on SM8650-QRD
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Message-ID: <20250909190614.3531435-1-bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
enhancements"
Peter Wang <peter.wang@mediatek.com> says:
These patches collectively enhance the UFS host driver's reliability,
power management efficiency, and error recovery mechanisms on MediaTek
platforms. They address critical issues and introduce optimizations
that improve system stability and performance.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Improve the recovery process for hibernation exit failures. Trigger the
error handler and break the suspend operation to ensure effective
recovery from hibernation errors. Activate the error handling mechanism
by ufshcd_force_error_recovery and scheduling the error handler work.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Previous checks incorrectly tested the DMA addresses (dma_handle) for
NULL. Since dma_alloc_coherent() returns the CPU (virtual) address, the
NULL check should be performed on the *_base_addr pointer to correctly
detect allocation failures.
Update the checks to validate sqe_base_addr and cqe_base_addr instead of
sqe_dma_addr and cqe_dma_addr.
Fixes: 4682abfae2eb ("scsi: ufs: core: mcq: Allocate memory for MCQ mode")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The <ufs/ufs.h> header file defines constants and data structures
related to the UFS standard. Move the enumeration types related to
tracing into a new header file because these are not defined in the UFS
standard. An intended side effect of this patch is that the tracing
enumeration types are no longer visible to UFS host drivers.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250829153841.2201700-1-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Every ktime_get() call in the hot path has a measurable impact on IOPS.
Hence, only collect timestamps if the monitoring functionality is
enabled.
See also commit 1d8613a23f3c ("scsi: ufs: core: Introduce HBA
performance monitor sysfs nodes").
Cc: Can Guo <cang@codeaurora.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Daejun Park <daejun7.park@samsung.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250819153958.2255907-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The name ufshcd_wait_for_doorbell_clr() refers to legacy mode. Commit
8d077ede48c1 ("scsi: ufs: Optimize the command queueing code") added
support for MCQ mode in this function. Since then the name of this
function is misleading. Hence change the name of this function into
something that is appropriate for both legacy and MCQ mode.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250815155842.472867-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufshcd_wait_for_dev_cmd() and all its callers can return an OCS error.
OCS errors are represented by positive integers. Remove the WARN_ONCE()
statements that complain about positive error codes and update the
documentation.
Keep the behavior of ufshcd_wait_for_dev_cmd() because this return value
may end be passed as the second argument of bsg_job_done() and
bsg_job_done() handles positive and negative error codes differently.
Cc: Peter Wang <peter.wang@mediatek.com>
Fixes: cc59f3b68542 ("scsi: ufs: core: Improve return value documentation")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250815155842.472867-4-bvanassche@acm.org
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The UIC completion interrupt may be disabled while an UIC command is
being processed. When the UIC completion interrupt is reenabled, an UIC
interrupt is triggered and the WARN_ON_ONCE(!cmd) statement is hit.
Hence this patch that removes this kernel warning.
Fixes: fcd8b0450a9a ("scsi: ufs: core: Make ufshcd_uic_cmd_compl() easier to analyze")
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250815155842.472867-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 3c7ac40d7322 ("scsi: ufs: core: Delegate the interrupt service
routine to a threaded IRQ handler") introduced an IRQ lock inversion
issue. Fix this lock inversion by changing the spin_lock_irq() calls into
spin_lock_irqsave() calls in code that can be called either from
interrupt context or from thread context. This patch fixes the following
lockdep complaint:
WARNING: possible irq lock inversion dependency detected
6.12.30-android16-5-maybe-dirty-4k #1 Tainted: G W OE
--------------------------------------------------------
kworker/u28:0/12 just changed the state of lock:
ffffff881e29dd60 (&hba->clk_gating.lock){-...}-{2:2}, at: ufshcd_release_scsi_cmd+0x60/0x110
but this lock took another, HARDIRQ-unsafe lock in the past:
(shost->host_lock){+.+.}-{2:2}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(shost->host_lock);
local_irq_disable();
lock(&hba->clk_gating.lock);
lock(shost->host_lock);
<Interrupt>
lock(&hba->clk_gating.lock);
*** DEADLOCK ***
4 locks held by kworker/u28:0/12:
#0: ffffff8800ac6158 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c
#1: ffffffc085c93d70 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c
#2: ffffff881e29c0e0 (&shost->scan_mutex){+.+.}-{3:3}, at: __scsi_add_device+0x74/0x120
#3: ffffff881960ea00 (&hwq->cq_lock){-...}-{2:2}, at: ufshcd_mcq_poll_cqe_lock+0x28/0x104
the shortest dependencies between 2nd lock and 1st lock:
-> (shost->host_lock){+.+.}-{2:2} {
HARDIRQ-ON-W at:
lock_acquire+0x134/0x2b4
_raw_spin_lock+0x48/0x64
ufshcd_sl_intr+0x4c/0xa08
ufshcd_threaded_intr+0x70/0x12c
irq_thread_fn+0x48/0xa8
irq_thread+0x130/0x1ec
kthread+0x110/0x134
ret_from_fork+0x10/0x20
SOFTIRQ-ON-W at:
lock_acquire+0x134/0x2b4
_raw_spin_lock+0x48/0x64
ufshcd_sl_intr+0x4c/0xa08
ufshcd_threaded_intr+0x70/0x12c
irq_thread_fn+0x48/0xa8
irq_thread+0x130/0x1ec
kthread+0x110/0x134
ret_from_fork+0x10/0x20
INITIAL USE at:
lock_acquire+0x134/0x2b4
_raw_spin_lock+0x48/0x64
ufshcd_sl_intr+0x4c/0xa08
ufshcd_threaded_intr+0x70/0x12c
irq_thread_fn+0x48/0xa8
irq_thread+0x130/0x1ec
kthread+0x110/0x134
ret_from_fork+0x10/0x20
}
... key at: [<ffffffc085ba1a98>] scsi_host_alloc.__key+0x0/0x10
... acquired at:
_raw_spin_lock_irqsave+0x5c/0x80
__ufshcd_release+0x78/0x118
ufshcd_send_uic_cmd+0xe4/0x118
ufshcd_dme_set_attr+0x88/0x1c8
ufs_google_phy_initialization+0x68/0x418 [ufs]
ufs_google_link_startup_notify+0x78/0x27c [ufs]
ufshcd_link_startup+0x84/0x720
ufshcd_init+0xf3c/0x1330
ufshcd_pltfrm_init+0x728/0x7d8
ufs_google_probe+0x30/0x84 [ufs]
platform_probe+0xa0/0xe0
really_probe+0x114/0x454
__driver_probe_device+0xa4/0x160
driver_probe_device+0x44/0x23c
__driver_attach_async_helper+0x60/0xd4
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
-> (&hba->clk_gating.lock){-...}-{2:2} {
IN-HARDIRQ-W at:
lock_acquire+0x134/0x2b4
_raw_spin_lock_irqsave+0x5c/0x80
ufshcd_release_scsi_cmd+0x60/0x110
ufshcd_compl_one_cqe+0x2c0/0x3f4
ufshcd_mcq_poll_cqe_lock+0xb0/0x104
ufs_google_mcq_intr+0x80/0xa0 [ufs]
__handle_irq_event_percpu+0x104/0x32c
handle_irq_event+0x40/0x9c
handle_fasteoi_irq+0x170/0x2e8
generic_handle_domain_irq+0x58/0x80
gic_handle_irq+0x48/0x104
call_on_irq_stack+0x3c/0x50
do_interrupt_handler+0x7c/0xd8
el1_interrupt+0x34/0x58
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x68/0x6c
_raw_spin_unlock_irqrestore+0x3c/0x6c
debug_object_assert_init+0x16c/0x21c
__mod_timer+0x4c/0x48c
schedule_timeout+0xd4/0x16c
io_schedule_timeout+0x48/0x70
do_wait_for_common+0x100/0x194
wait_for_completion_io_timeout+0x48/0x6c
blk_execute_rq+0x124/0x17c
scsi_execute_cmd+0x18c/0x3f8
scsi_probe_and_add_lun+0x204/0xd74
__scsi_add_device+0xbc/0x120
ufshcd_async_scan+0x80/0x3c0
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
INITIAL USE at:
lock_acquire+0x134/0x2b4
_raw_spin_lock_irqsave+0x5c/0x80
ufshcd_hold+0x34/0x14c
ufshcd_send_uic_cmd+0x28/0x118
ufshcd_dme_set_attr+0x88/0x1c8
ufs_google_phy_initialization+0x68/0x418 [ufs]
ufs_google_link_startup_notify+0x78/0x27c [ufs]
ufshcd_link_startup+0x84/0x720
ufshcd_init+0xf3c/0x1330
ufshcd_pltfrm_init+0x728/0x7d8
ufs_google_probe+0x30/0x84 [ufs]
platform_probe+0xa0/0xe0
really_probe+0x114/0x454
__driver_probe_device+0xa4/0x160
driver_probe_device+0x44/0x23c
__driver_attach_async_helper+0x60/0xd4
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
}
... key at: [<ffffffc085ba6fe8>] ufshcd_init.__key+0x0/0x10
... acquired at:
mark_lock+0x1c4/0x224
__lock_acquire+0x438/0x2e1c
lock_acquire+0x134/0x2b4
_raw_spin_lock_irqsave+0x5c/0x80
ufshcd_release_scsi_cmd+0x60/0x110
ufshcd_compl_one_cqe+0x2c0/0x3f4
ufshcd_mcq_poll_cqe_lock+0xb0/0x104
ufs_google_mcq_intr+0x80/0xa0 [ufs]
__handle_irq_event_percpu+0x104/0x32c
handle_irq_event+0x40/0x9c
handle_fasteoi_irq+0x170/0x2e8
generic_handle_domain_irq+0x58/0x80
gic_handle_irq+0x48/0x104
call_on_irq_stack+0x3c/0x50
do_interrupt_handler+0x7c/0xd8
el1_interrupt+0x34/0x58
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x68/0x6c
_raw_spin_unlock_irqrestore+0x3c/0x6c
debug_object_assert_init+0x16c/0x21c
__mod_timer+0x4c/0x48c
schedule_timeout+0xd4/0x16c
io_schedule_timeout+0x48/0x70
do_wait_for_common+0x100/0x194
wait_for_completion_io_timeout+0x48/0x6c
blk_execute_rq+0x124/0x17c
scsi_execute_cmd+0x18c/0x3f8
scsi_probe_and_add_lun+0x204/0xd74
__scsi_add_device+0xbc/0x120
ufshcd_async_scan+0x80/0x3c0
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
stack backtrace:
CPU: 6 UID: 0 PID: 12 Comm: kworker/u28:0 Tainted: G W OE 6.12.30-android16-5-maybe-dirty-4k #1 ccd4020fe444bdf629efc3b86df6be920b8df7d0
Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Spacecraft board based on MALIBU (DT)
Workqueue: async async_run_entry_fn
Call trace:
dump_backtrace+0xfc/0x17c
show_stack+0x18/0x28
dump_stack_lvl+0x40/0xa0
dump_stack+0x18/0x24
print_irq_inversion_bug+0x2fc/0x304
mark_lock_irq+0x388/0x4fc
mark_lock+0x1c4/0x224
__lock_acquire+0x438/0x2e1c
lock_acquire+0x134/0x2b4
_raw_spin_lock_irqsave+0x5c/0x80
ufshcd_release_scsi_cmd+0x60/0x110
ufshcd_compl_one_cqe+0x2c0/0x3f4
ufshcd_mcq_poll_cqe_lock+0xb0/0x104
ufs_google_mcq_intr+0x80/0xa0 [ufs dd6f385554e109da094ab91d5f7be18625a2222a]
__handle_irq_event_percpu+0x104/0x32c
handle_irq_event+0x40/0x9c
handle_fasteoi_irq+0x170/0x2e8
generic_handle_domain_irq+0x58/0x80
gic_handle_irq+0x48/0x104
call_on_irq_stack+0x3c/0x50
do_interrupt_handler+0x7c/0xd8
el1_interrupt+0x34/0x58
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x68/0x6c
_raw_spin_unlock_irqrestore+0x3c/0x6c
debug_object_assert_init+0x16c/0x21c
__mod_timer+0x4c/0x48c
schedule_timeout+0xd4/0x16c
io_schedule_timeout+0x48/0x70
do_wait_for_common+0x100/0x194
wait_for_completion_io_timeout+0x48/0x6c
blk_execute_rq+0x124/0x17c
scsi_execute_cmd+0x18c/0x3f8
scsi_probe_and_add_lun+0x204/0xd74
__scsi_add_device+0xbc/0x120
ufshcd_async_scan+0x80/0x3c0
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Fixes: 3c7ac40d7322 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250815155842.472867-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Measurements have shown that IOPS improve by 2% - 3% on my UFS 4 test
setup every time a ktime_get() call is removed from the UFS driver
command processing path. Hence this patch that modifies
ufshcd_clk_scaling_start_busy() such that ktime_get() is only called if
the returned value will be used.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250813171049.3399387-1-bvanassche@acm.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in outstanding commits for 6.17.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull more SCSI updates from James Bottomley:
"This is mostly fixes and cleanups and code reworks that trickled in
across the merge window and the weeks leading up. The only substantive
update is the Mediatek ufs driver which accounts for the bulk of the
additions"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (37 commits)
scsi: libsas: Use a bool for sas_deform_port() second argument
scsi: libsas: Move declarations of internal functions to sas_internal.h
scsi: libsas: Make sas_get_ata_info() static
scsi: libsas: Simplify sas_ata_wait_eh()
scsi: libsas: Refactor dev_is_sata()
scsi: sd: Make sd shutdown issue START STOP UNIT appropriately
scsi: arm64: dts: mediatek: mt8195: Add UFSHCI node
scsi: dt-bindings: mediatek,ufs: add MT8195 compatible and update clock nodes
scsi: dt-bindings: mediatek,ufs: Add ufs-disable-mcq flag for UFS host
scsi: ufs: ufs-mediatek: Add UFS host support for MT8195 SoC
scsi: ufs: ufs-pci: Remove control of UIC Completion interrupt for Intel MTL
scsi: ufs: core: Do not write interrupt enable register unnecessarily
scsi: ufs: core: Set and clear UIC Completion interrupt as needed
scsi: ufs: core: Remove duplicated code in ufshcd_send_bsg_uic_cmd()
scsi: ufs: core: Move ufshcd_enable_intr() and ufshcd_disable_intr()
scsi: ufs: ufs-pci: Remove UFS PCI driver's ->late_init() call back
scsi: ufs: ufs-pci: Fix default runtime and system PM levels
scsi: ufs: ufs-pci: Fix hibernate state transition for Intel MTL-like host controllers
scsi: ufs: host: mediatek: Support FDE (AES) clock scaling
scsi: ufs: host: mediatek: Support clock scaling with Vcore binding
...
|
|
When devm_add_action_or_reset() fails, it is due to a failed memory
allocation and will thus return -ENOMEM. dev_err_probe() doesn't do
anything when error is -ENOMEM. Therefore, remove the useless call to
dev_err_probe() when devm_add_action_or_reset() fails, and just return
the value instead.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://lore.kernel.org/r/pndtt2mkt8v.a.out@axis.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 3c7ac40d7322 ("scsi: ufs: core: Delegate the interrupt service
routine to a threaded IRQ handler") introduced a regression where the UFS
interrupt status register (IS) was not cleared in ufshcd_intr() when
operating in MCQ mode. As a result, the IS register remained uncleared.
This led to a persistent issue during UIC interrupts:
ufshcd_is_auto_hibern8_error() consistently returned true because the
UFSHCD_UIC_HIBERN8_MASK bit was set, while the active command was neither
UIC_CMD_DME_HIBER_ENTER nor UIC_CMD_DME_HIBER_EXIT. This caused
continuous auto hibern8 enter errors and device failed to boot.
To fix this, ensure that the interrupt status register is properly
cleared in the ufshcd_intr() function for both MCQ mode with ESI enabled.
[ 4.553226] ufshcd-qcom 1d84000.ufs: ufshcd_check_errors: Auto
Hibern8 Enter failed - status: 0x00000040, upmcrs: 0x00000001
[ 4.553229] ufshcd-qcom 1d84000.ufs: ufshcd_check_errors: saved_err
0x40 saved_uic_err 0x0
[ 4.553311] host_regs: 00000000: d5c7033f 20e0071f 00000400 00000000
[ 4.553312] host_regs: 00000010: 01000000 00010217 00000c96 00000000
[ 4.553314] host_regs: 00000020: 00000440 00170ef5 00000000 00000000
[ 4.553316] host_regs: 00000030: 0000010f 00000001 00000000 00000000
[ 4.553317] host_regs: 00000040: 00000000 00000000 00000000 00000000
[ 4.553319] host_regs: 00000050: fffdf000 0000000f 00000000 00000000
[ 4.553320] host_regs: 00000060: 00000001 80000000 00000000 00000000
[ 4.553322] host_regs: 00000070: fffde000 0000000f 00000000 00000000
[ 4.553323] host_regs: 00000080: 00000001 00000000 00000000 00000000
[ 4.553325] host_regs: 00000090: 00000002 d0020000 00000000 01930200
Fixes: 3c7ac40d7322 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler")
Co-developed-by: Palash Kambar <quic_pkambar@quicinc.com>
Signed-off-by: Palash Kambar <quic_pkambar@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20250728225711.29273-1-quic_nitirawa@quicinc.com
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"Smaller set of driver updates than usual (ufs, lpfc, mpi3mr).
The rest (including the core file changes) are doc updates and some
minor bug fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (49 commits)
scsi: libiscsi: Initialize iscsi_conn->dd_data only if memory is allocated
scsi: scsi_transport_fc: Add comments to describe added 'rport' parameter
scsi: bfa: Double-free fix
scsi: isci: Fix dma_unmap_sg() nents value
scsi: mvsas: Fix dma_unmap_sg() nents value
scsi: elx: efct: Fix dma_unmap_sg() nents value
scsi: scsi_transport_fc: Change to use per-rport devloss_work_q
scsi: ufs: exynos: Fix programming of HCI_UTRL_NEXUS_TYPE
scsi: core: Fix kernel doc for scsi_track_queue_full()
scsi: ibmvscsi_tgt: Fix dma_unmap_sg() nents value
scsi: ibmvscsi_tgt: Fix typo in comment
scsi: mpi3mr: Update driver version to 8.14.0.5.50
scsi: mpi3mr: Serialize admin queue BAR writes on 32-bit systems
scsi: mpi3mr: Drop unnecessary volatile from __iomem pointers
scsi: mpi3mr: Fix race between config read submit and interrupt completion
scsi: ufs: ufs-qcom: Enable QUnipro Internal Clock Gating
scsi: ufs: core: Add ufshcd_dme_rmw() to modify DME attributes
scsi: ufs: ufs-qcom: Update esi_vec_mask for HW major version >= 6
scsi: core: Use scsi_cmd_priv() instead of open-coding it
scsi: qla2xxx: Remove firmware URL
...
|
|
Intel MTL-like host controllers"
Adrian Hunter <adrian.hunter@intel.com> says:
Hi
Here is V2 of a couple of fixes for Intel MTL-like UFS host controllers,
related to link Hibernation state.
Following the fixes are some improvements for the enabling and disabling
of UIC Completion interrupts.
Link: https://lore.kernel.org/r/20250723165856.145750-1-adrian.hunter@intel.com
Conflicts:
drivers/ufs/core/ufshcd.c
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Write a new value to the interrupt enable register only if it is
different from the old value, thereby saving a register write operation.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250723165856.145750-8-adrian.hunter@intel.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently the UIC Completion interrupt is left enabled except for when
issuing link hibernate commands, in which case the interrupt is disabled
and then re-enabled.
Instead, set and clear the interrupt enable bit as needed.
That is slightly simpler and less error prone, but also avoids side
effects of accessing the interrupt enable register after entering link
hibernation. Specifically, for some host controllers like Intel MTL,
doing so disrupts the link state transition.
Note also, the interrupt register is not read back anymore after it is
updated. No other code does that, so it is assumed to be no longer
necessary if it ever was.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250723165856.145750-7-adrian.hunter@intel.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Make ufshcd_send_bsg_uic_cmd() call ufshcd_send_uic_cmd() instead of
duplicating its code.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250723165856.145750-6-adrian.hunter@intel.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move ufshcd_enable_intr() and ufshcd_disable_intr() so they can be called
in subsequent patches without forward declarations.
No functional change.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250723165856.145750-5-adrian.hunter@intel.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove hard-coded strings by using the str_true_false() helper function.
Signed-off-by: Liu Song <liu.song13@zte.com.cn>
Link: https://lore.kernel.org/r/20250721200138431dOU9KyajGyGi5339ma26p@zte.com.cn
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If the h8 exit fails during runtime resume process, the runtime thread
enters runtime suspend immediately and the error handler operates at the
same time. It becomes stuck and cannot be recovered through the error
handler. To fix this, use link recovery instead of the error handler.
Fixes: 4db7a2360597 ("scsi: ufs: Fix concurrency of error handler and other error recovery paths")
Signed-off-by: Seunghui Lee <sh043.lee@samsung.com>
Link: https://lore.kernel.org/r/20250717081213.6811-1-sh043.lee@samsung.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Nitin Rawat <quic_nitirawa@quicinc.com> says:
This patch series adds programming support for Qualcomm UFS
to align with Hardware Specification.
In this patch series below changes are taken care.
1. Enable QUnipro Internal Clock Gating
2. Update esi_vec_mask for HW major version >= 6
Link: https://lore.kernel.org/r/20250714075336.2133-1-quic_nitirawa@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Introduce ufshcd_dme_rmw() API to read, modify, and write DME attributes
in UFS host controllers using a mask and value.
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20250714075336.2133-3-quic_nitirawa@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Some functions return a negative value to indicate an error while other
functions return a value != 0 to indicate an error. Document the return
value behavior where this documentation is missing and fix the return
value documentation where necessary. Add warnings to detect mismatches
between documentation and implementation. This matters because several
sysfs callback functions only work correctly if a negative value is
returned upon error.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250623215909.4169007-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Change "resourse" into "resource" in the name of a sysfs attribute.
Fixes: d829fc8a1058 ("scsi: ufs: sysfs: unit descriptor")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250624181658.336035-1-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Previously, the response buffer (ucd_rsp_ptr) was cleared in multiple
UPIU preparation functions. Do it once.
Signed-off-by: Avri Altman <avri.altman@sandisk.com>
Link: https://lore.kernel.org/r/20250617095611.89229-2-avri.altman@sandisk.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In ufshcd_host_reset_and_restore(), scale up clocks only when clock
scaling is supported. Without this change CPU latency is voted for 0
(ufshcd_pm_qos_update) during resume unconditionally.
Signed-off-by: anvithdosapati <anvithdosapati@google.com>
Link: https://lore.kernel.org/r/20250616085734.2133581-1-anvithdosapati@google.com
Fixes: a3cd5ec55f6c ("scsi: ufs: add load based scaling of UFS gear")
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Follow JESD220G, support HID(Host Initiated Defragmentation) through
sysfs, the relevant sysfs nodes are as follows:
1. analysis_trigger
2. defrag_trigger
3. fragmented_size
4. defrag_size
5. progress_ratio
6. state
The detailed definition of the six nodes can be found in the sysfs
documentation.
HID's execution policy is given to user-space.
Signed-off-by: Huan Tang <tanghuan@vivo.com>
Signed-off-by: Wenxing Cheng <wenxing.cheng@vivo.com>
Link: https://lore.kernel.org/r/20250523064604.800-1-tanghuan@vivo.com
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bean Huo <huobean@gmail.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in remaining fixes from queue branch.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI fixes from James Bottomley:
"Mostly trivial updates and bug fixes (core update is a comment
spelling fix).
The bigger UFS update is the clock scaling and frequency fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Prevent calling phy_exit() before phy_init()
scsi: ufs: qcom: Call ufs_qcom_cfg_timers() in clock scaling path
scsi: ufs: qcom: Map devfreq OPP freq to UniPro Core Clock freq
scsi: ufs: qcom: Check gear against max gear in vop freq_to_gear()
scsi: aacraid: Remove useless code
scsi: core: devinfo: Fix typo in comment
scsi: ufs: core: Don't perform UFS clkscaling during host async scan
|
|
ufshcd_err_handling_prepare() calls ufshcd_rpm_get_sync(). The latter
function can only succeed if UFSHCD_EH_IN_PROGRESS is not set because
resuming involves submitting a SCSI command and ufshcd_queuecommand()
returns SCSI_MLQUEUE_HOST_BUSY if UFSHCD_EH_IN_PROGRESS is set. Fix this
hang by setting UFSHCD_EH_IN_PROGRESS after ufshcd_rpm_get_sync() has
been called instead of before.
Backtrace:
__switch_to+0x174/0x338
__schedule+0x600/0x9e4
schedule+0x7c/0xe8
schedule_timeout+0xa4/0x1c8
io_schedule_timeout+0x48/0x70
wait_for_common_io+0xa8/0x160 //waiting on START_STOP
wait_for_completion_io_timeout+0x10/0x20
blk_execute_rq+0xe4/0x1e4
scsi_execute_cmd+0x108/0x244
ufshcd_set_dev_pwr_mode+0xe8/0x250
__ufshcd_wl_resume+0x94/0x354
ufshcd_wl_runtime_resume+0x3c/0x174
scsi_runtime_resume+0x64/0xa4
rpm_resume+0x15c/0xa1c
__pm_runtime_resume+0x4c/0x90 // Runtime resume ongoing
ufshcd_err_handler+0x1a0/0xd08
process_one_work+0x174/0x808
worker_thread+0x15c/0x490
kthread+0xf4/0x1ec
ret_from_fork+0x10/0x20
Signed-off-by: Sanjeev Yadav <sanjeev.y@mediatek.com>
[ bvanassche: rewrote patch description ]
Fixes: 62694735ca95 ("[SCSI] ufs: Add runtime PM support for UFS host controller driver")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250523201409.1676055-1-bvanassche@acm.org
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (smartpqi, ufs, lpfc, scsi_debug, target,
hisi_sas) with the only substantive core change being the removal of
the stream_status member from the scsi_stream_status_header (to get
rid of flex array members)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (77 commits)
scsi: target: core: Constify struct target_opcode_descriptor
scsi: target: core: Constify enabled() in struct target_opcode_descriptor
scsi: hisi_sas: Fix warning detected by sparse
scsi: mpt3sas: Fix _ctl_get_mpt_mctp_passthru_adapter() to return IOC pointer
scsi: sg: Remove unnecessary NULL check before unregister_sysctl_table()
scsi: ufs: mcq: Delete ufshcd_release_scsi_cmd() in ufshcd_mcq_abort()
scsi: ufs: qcom: dt-bindings: Document the SM8750 UFS Controller
scsi: mvsas: Fix typos in SAS/SATA VSP register comments
scsi: fnic: Replace memset() with eth_zero_addr()
scsi: ufs: core: Support updating device command timeout
scsi: ufs: core: Change hwq_id type and value
scsi: ufs: core: Increase the UIC command timeout further
scsi: zfcp: Simplify workqueue allocation
scsi: ufs: core: Print error value as hex format in ufshcd_err_handler()
scsi: sd: Remove the stream_status member from scsi_stream_status_header
scsi: docs: Clean up some style in scsi_mid_low_api
scsi: core: Remove unused scsi_dev_info_list_del_keyed()
scsi: isci: Remove unused sci_remote_device_reset()
scsi: scsi_debug: Reduce DEF_ATOMIC_WR_MAX_LENGTH
scsi: smartpqi: Delete a stray tab in pqi_is_parity_write_stream()
...
|
|
When preparing for UFS clock scaling, the UFS driver will quiesce all
sdevs queues in the UFS SCSI host tagset list and then unquiesce them in
ufshcd_clock_scaling_unprepare(). If the UFS SCSI host async scan is in
progress at this time, some LUs may be added to the tagset list between
UFS clkscale prepare and unprepare. This can cause two issues:
1. During clock scaling, there may be I/O requests issued through new
added queues that have not been quiesced, leading to task abort issue.
2. These new added queues that have not been quiesced will be unquiesced
as well when UFS clkscale is unprepared, resulting in warning prints.
Therefore, use the mutex lock scan_mutex in
ufshcd_clock_scaling_prepare() and ufshcd_clock_scaling_unprepare() to
protect it.
Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/20250522081233.2358565-1-quic_ziqichen@quicinc.com
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
