| Age | Commit message (Collapse) | Author | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs buffer_head updates from Christian Brauner:
"This cleans up the mess that has accumulated over the years in
metadata buffer_head tracking for inodes.
It moves the tracking into dedicated structure in filesystem-private
part of the inode (so that we don't use private_list, private_data,
and private_lock in struct address_space), and also moves couple other
users of private_data and private_list so these are removed from
struct address_space saving 3 longs in struct inode for 99% of inodes"
* tag 'vfs-7.1-rc1.bh.metadata' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (42 commits)
fs: Drop i_private_list from address_space
fs: Drop mapping_metadata_bhs from address space
ext4: Track metadata bhs in fs-private inode part
minix: Track metadata bhs in fs-private inode part
udf: Track metadata bhs in fs-private inode part
fat: Track metadata bhs in fs-private inode part
bfs: Track metadata bhs in fs-private inode part
affs: Track metadata bhs in fs-private inode part
ext2: Track metadata bhs in fs-private inode part
fs: Provide functions for handling mapping_metadata_bhs directly
fs: Switch inode_has_buffers() to take mapping_metadata_bhs
fs: Make bhs point to mapping_metadata_bhs
fs: Move metadata bhs tracking to a separate struct
fs: Fold fsync_buffers_list() into sync_mapping_buffers()
fs: Drop osync_buffers_list()
kvm: Use private inode list instead of i_private_list
fs: Remove i_private_data
aio: Stop using i_private_data and i_private_lock
hugetlbfs: Stop using i_private_data
fs: Stop using i_private_data for metadata bh tracking
...
|
|
Track metadata bhs for an inode in fs-private part of the inode.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260326095354.16340-78-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
There are only very few filesystems using generic metadata buffer head
tracking and everybody is paying the overhead. When we remove this
tracking for inode reclaim code .evict will start to see inodes with
metadata buffers attached so write them out and prune them.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260326095354.16340-62-jack@suse.cz
Tested-by: syzbot@syzkaller.appspotmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
BFS uses list of metadata bhs attached to an inode. Switch it to use
generic_buffers_fsync() instead of generic_file_fsync() as we'll be
removing metadata bh handling from generic_file_fsync().
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260326095354.16340-53-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
On 32-bit architectures, unsigned long is only 32 bits wide, which
causes 64-bit inode numbers to be silently truncated. Several
filesystems (NFS, XFS, BTRFS, etc.) can generate inode numbers that
exceed 32 bits, and this truncation can lead to inode number collisions
and other subtle bugs on 32-bit systems.
Change the type of inode->i_ino from unsigned long to u64 to ensure that
inode numbers are always represented as 64-bit values regardless of
architecture. Update all format specifiers treewide from %lu/%lx to
%llu/%llx to match the new type, along with corresponding local variable
types.
This is the bulk treewide conversion. Earlier patches in this series
handled trace events separately to allow trace field reordering for
better struct packing on 32-bit.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260304-iino-u64-v3-12-2257ad83d372@kernel.org
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode updates from Christian Brauner:
"Features:
- Hide inode->i_state behind accessors. Open-coded accesses prevent
asserting they are done correctly. One obvious aspect is locking,
but significantly more can be checked. For example it can be
detected when the code is clearing flags which are already missing,
or is setting flags when it is illegal (e.g., I_FREEING when
->i_count > 0)
- Provide accessors for ->i_state, converts all filesystems using
coccinelle and manual conversions (btrfs, ceph, smb, f2fs, gfs2,
overlayfs, nilfs2, xfs), and makes plain ->i_state access fail to
compile
- Rework I_NEW handling to operate without fences, simplifying the
code after the accessor infrastructure is in place
Cleanups:
- Move wait_on_inode() from writeback.h to fs.h
- Spell out fenced ->i_state accesses with explicit smp_wmb/smp_rmb
for clarity
- Cosmetic fixes to LRU handling
- Push list presence check into inode_io_list_del()
- Touch up predicts in __d_lookup_rcu()
- ocfs2: retire ocfs2_drop_inode() and I_WILL_FREE usage
- Assert on ->i_count in iput_final()
- Assert ->i_lock held in __iget()
Fixes:
- Add missing fences to I_NEW handling"
* tag 'vfs-6.19-rc1.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (22 commits)
dcache: touch up predicts in __d_lookup_rcu()
fs: push list presence check into inode_io_list_del()
fs: cosmetic fixes to lru handling
fs: rework I_NEW handling to operate without fences
fs: make plain ->i_state access fail to compile
xfs: use the new ->i_state accessors
nilfs2: use the new ->i_state accessors
overlayfs: use the new ->i_state accessors
gfs2: use the new ->i_state accessors
f2fs: use the new ->i_state accessors
smb: use the new ->i_state accessors
ceph: use the new ->i_state accessors
btrfs: use the new ->i_state accessors
Manual conversion to use ->i_state accessors of all places not covered by coccinelle
Coccinelle-based conversion to use ->i_state accessors
fs: provide accessors for ->i_state
fs: spell out fenced ->i_state accesses with explicit smp_wmb/smp_rmb
fs: move wait_on_inode() from writeback.h to fs.h
fs: add missing fences to I_NEW handling
ocfs2: retire ocfs2_drop_inode() and I_WILL_FREE usage
...
|
|
syzbot is reporting that S_IFMT bits of inode->i_mode can become bogus when
the S_IFMT bits of the 32bits "mode" field loaded from disk are corrupted
or when the 32bits "attributes" field loaded from disk are corrupted.
A documentation says that BFS uses only lower 9 bits of the "mode" field.
But I can't find an explicit explanation that the unused upper 23 bits
(especially, the S_IFMT bits) are initialized with 0.
Therefore, ignore the S_IFMT bits of the "mode" field loaded from disk.
Also, verify that the value of the "attributes" field loaded from disk is
either BFS_VREG or BFS_VDIR (because BFS supports only regular files and
the root directory).
Reported-by: syzbot+895c23f6917da440ed0d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=895c23f6917da440ed0d
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://patch.msgid.link/fabce673-d5b9-4038-8287-0fd65d80203b@I-love.SAKURA.ne.jp
Reviewed-by: Tigran Aivazian <aivazian.tigran@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
All places were patched by coccinelle with the default expecting that
->i_lock is held, afterwards entries got fixed up by hand to use
unlocked variants as needed.
The script:
@@
expression inode, flags;
@@
- inode->i_state & flags
+ inode_state_read(inode) & flags
@@
expression inode, flags;
@@
- inode->i_state &= ~flags
+ inode_state_clear(inode, flags)
@@
expression inode, flag1, flag2;
@@
- inode->i_state &= ~flag1 & ~flag2
+ inode_state_clear(inode, flag1 | flag2)
@@
expression inode, flags;
@@
- inode->i_state |= flags
+ inode_state_set(inode, flags)
@@
expression inode, flags;
@@
- inode->i_state = flags
+ inode_state_assign(inode, flags)
@@
expression inode, flags;
@@
- flags = inode->i_state
+ flags = inode_state_read(inode)
@@
expression inode, flags;
@@
- READ_ONCE(inode->i_state) & flags
+ inode_state_read(inode) & flags
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull mmap_prepare updates from Christian Brauner:
"Last cycle we introduce f_op->mmap_prepare() in c84bf6dd2b83 ("mm:
introduce new .mmap_prepare() file callback").
This is preferred to the existing f_op->mmap() hook as it does require
a VMA to be established yet, thus allowing the mmap logic to invoke
this hook far, far earlier, prior to inserting a VMA into the virtual
address space, or performing any other heavy handed operations.
This allows for much simpler unwinding on error, and for there to be a
single attempt at merging a VMA rather than having to possibly
reattempt a merge based on potentially altered VMA state.
Far more importantly, it prevents inappropriate manipulation of
incompletely initialised VMA state, which is something that has been
the cause of bugs and complexity in the past.
The intent is to gradually deprecate f_op->mmap, and in that vein this
series coverts the majority of file systems to using f_op->mmap_prepare.
Prerequisite steps are taken - firstly ensuring all checks for mmap
capabilities use the file_has_valid_mmap_hooks() helper rather than
directly checking for f_op->mmap (which is now not a valid check) and
secondly updating daxdev_mapping_supported() to not require a VMA
parameter to allow ext4 and xfs to be converted.
Commit bb666b7c2707 ("mm: add mmap_prepare() compatibility layer for
nested file systems") handles the nasty edge-case of nested file
systems like overlayfs, which introduces a compatibility shim to allow
f_op->mmap_prepare() to be invoked from an f_op->mmap() callback.
This allows for nested filesystems to continue to function correctly
with all file systems regardless of which callback is used. Once we
finally convert all file systems, this shim can be removed.
As a result, ecryptfs, fuse, and overlayfs remain unaltered so they
can nest all other file systems.
We additionally do not update resctl - as this requires an update to
remap_pfn_range() (or an alternative to it) which we defer to a later
series, equally we do not update cramfs which needs a mixed mapping
insertion with the same issue, nor do we update procfs, hugetlbfs,
syfs or kernfs all of which require VMAs for internal state and hooks.
We shall return to all of these later"
* tag 'vfs-6.17-rc1.mmap_prepare' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
doc: update porting, vfs documentation to describe mmap_prepare()
fs: replace mmap hook with .mmap_prepare for simple mappings
fs: convert most other generic_file_*mmap() users to .mmap_prepare()
fs: convert simple use of generic_file_*_mmap() to .mmap_prepare()
mm/filemap: introduce generic_file_*_mmap_prepare() helpers
fs/xfs: transition from deprecated .mmap hook to .mmap_prepare
fs/ext4: transition from deprecated .mmap hook to .mmap_prepare
fs/dax: make it possible to check dev dax support without a VMA
fs: consistently use can_mmap_file() helper
mm/nommu: use file_has_valid_mmap_hooks() helper
mm: rename call_mmap/mmap_prepare to vfs_mmap/mmap_prepare
|
|
Change the address_space_operations callbacks write_begin() and
write_end() to take struct kiocb * as the first argument instead of
struct file *.
Update all affected function prototypes, implementations, call sites,
and related documentation across VFS, filesystems, and block layer.
Part of a series refactoring address_space_operations write_begin and
write_end callbacks to use struct kiocb for passing write context and
flags.
Signed-off-by: Taotao Chen <chentaotao@didiglobal.com>
Link: https://lore.kernel.org/20250716093559.217344-4-chentaotao@didiglobal.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Since commit c84bf6dd2b83 ("mm: introduce new .mmap_prepare() file
callback"), the f_op->mmap() hook has been deprecated in favour of
f_op->mmap_prepare().
We have provided generic .mmap_prepare() equivalents, so update all file
systems that specify these directly in their file_operations structures.
This updates 9p, adfs, affs, bfs, fat, hfs, hfsplus, hostfs, hpfs, jffs2,
jfs, minix, omfs, ramfs and ufs file systems directly.
It updates generic_ro_fops which impacts qnx4, cramfs, befs, squashfs,
frebxfs, qnx6, efs, romfs, erofs and isofs file systems.
There are remaining file systems which use generic hooks in a less direct
way which we address in a subsequent commit.
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/c7dc90e44a9e75e750939ea369290d6e441a18e6.1750099179.git.lorenzo.stoakes@oracle.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert the bfs filesystem to use the new mount API.
Tested using mount and simple writes & reads on ro/rw bfs devices.
Signed-off-by: Pavel Reichl <preichl@redhat.com>
Link: https://lore.kernel.org/r/20250320204224.181403-1-preichl@redhat.com
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert all callers from working on a page to working on one page
of a folio (support for working on an entire folio can come later).
Removes a lot of folio->page->folio conversions.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Yes, yes, I know the slab people were planning on going slow and letting
every subsystem fight this thing on their own. But let's just rip off
the band-aid and get it over and done with. I don't want to see a
number of unnecessary pull requests just to get rid of a flag that no
longer has any meaning.
This was mainly done with a couple of 'sed' scripts and then some manual
cleanup of the end result.
Link: https://lore.kernel.org/all/CAHk-=wji0u+OOtmAOD-5JV3SXcRJF___k_+8XNKmak0yd5vW1Q@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull misc filesystem updates from Al Viro:
"Misc cleanups (the part that hadn't been picked by individual fs
trees)"
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
apparmorfs: don't duplicate kfree_link()
orangefs: saner arguments passing in readdir guts
ocfs2_find_match(): there's no such thing as NULL or negative ->d_parent
reiserfs_add_entry(): get rid of pointless namelen checks
__ocfs2_add_entry(), ocfs2_prepare_dir_for_insert(): namelen checks
ext4_add_entry(): ->d_name.len is never 0
befs: d_obtain_alias(ERR_PTR(...)) will do the right thing
affs: d_obtain_alias(ERR_PTR(...)) will do the right thing
/proc/sys: use d_splice_alias() calling conventions to simplify failure exits
hostfs: use d_splice_alias() calling conventions to simplify failure exits
udf_fiiter_add_entry(): check for zero ->d_name.len is bogus...
udf: d_obtain_alias(ERR_PTR(...)) will do the right thing...
udf: d_splice_alias() will do the right thing on ERR_PTR() inode
nfsd: kill stale comment about simple_fill_super() requirements
bfs_add_entry(): get rid of pointless ->d_name.len checks
nilfs2: d_obtain_alias(ERR_PTR(...)) will do the right thing...
zonefs: d_splice_alias() will do the right thing on ERR_PTR() inode
|
|
If the filesystem implements migrate_folio and writepages, there is no
need for a writepage implementation.
Link: https://lkml.kernel.org/r/20231215200245.748418-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
First of all, any dentry getting here would have passed bfs_lookup(),
so it it passed ENAMETOOLONG check there, there's no need to
repeat it. And we are not going to get dentries with zero name length -
that check ultimately comes from ext2 and it's as pointless here as it
used to be there.
Acked-by: Tigran Aivazian <aivazian.tigran@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Convert to using the new inode timestamp accessor functions.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20231004185347.80880-20-jlayton@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pull block updates from Jens Axboe:
"Pretty quiet round for this release. This contains:
- Add support for zoned storage to ublk (Andreas, Ming)
- Series improving performance for drivers that mark themselves as
needing a blocking context for issue (Bart)
- Cleanup the flush logic (Chengming)
- sed opal keyring support (Greg)
- Fixes and improvements to the integrity support (Jinyoung)
- Add some exports for bcachefs that we can hopefully delete again in
the future (Kent)
- deadline throttling fix (Zhiguo)
- Series allowing building the kernel without buffer_head support
(Christoph)
- Sanitize the bio page adding flow (Christoph)
- Write back cache fixes (Christoph)
- MD updates via Song:
- Fix perf regression for raid0 large sequential writes (Jan)
- Fix split bio iostat for raid0 (David)
- Various raid1 fixes (Heinz, Xueshi)
- raid6test build fixes (WANG)
- Deprecate bitmap file support (Christoph)
- Fix deadlock with md sync thread (Yu)
- Refactor md io accounting (Yu)
- Various non-urgent fixes (Li, Yu, Jack)
- Various fixes and cleanups (Arnd, Azeem, Chengming, Damien, Li,
Ming, Nitesh, Ruan, Tejun, Thomas, Xu)"
* tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux: (113 commits)
block: use strscpy() to instead of strncpy()
block: sed-opal: keyring support for SED keys
block: sed-opal: Implement IOC_OPAL_REVERT_LSP
block: sed-opal: Implement IOC_OPAL_DISCOVERY
blk-mq: prealloc tags when increase tagset nr_hw_queues
blk-mq: delete redundant tagset map update when fallback
blk-mq: fix tags leak when shrink nr_hw_queues
ublk: zoned: support REQ_OP_ZONE_RESET_ALL
md: raid0: account for split bio in iostat accounting
md/raid0: Fix performance regression for large sequential writes
md/raid0: Factor out helper for mapping and submitting a bio
md raid1: allow writebehind to work on any leg device set WriteMostly
md/raid1: hold the barrier until handle_read_error() finishes
md/raid1: free the r1bio before waiting for blocked rdev
md/raid1: call free_r1bio() before allow_barrier() in raid_end_bio_io()
blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init
drivers/rnbd: restore sysfs interface to rnbd-client
md/raid5-cache: fix null-ptr-deref for r5l_flush_stripe_to_raid()
raid6: test: only check for Altivec if building on powerpc hosts
raid6: test: make sure all intermediate and artifact files are .gitignored
...
|
|
Add a new config option that controls building the buffer_head code, and
select it from all file systems and stacking drivers that need it.
For the block device nodes and alternative iomap based buffered I/O path
is provided when buffer_head support is not enabled, and iomap needs a
a small tweak to define the IOMAP_F_BUFFER_HEAD flag to 0 to not call
into the buffer_head code when it doesn't exist.
Otherwise this is just Kconfig and ifdef changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230801172201.1923299-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-26-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When adding entries to a directory, POSIX generally requires that the
ctime be updated alongside the mtime.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230705190309.579783-2-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Replace pointers to generic_file_splice_read() with calls to
filemap_splice_read().
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: David Hildenbrand <david@redhat.com>
cc: John Hubbard <jhubbard@nvidia.com>
cc: linux-mm@kvack.org
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20230522135018.2742245-29-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
This function is NOT converted to handle large folios, so include
an assert that the filesystem isn't passing one in. Otherwise, use
the folio functions instead of the page functions, where they exist.
Convert all filesystems which use block_read_full_page().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
There are no more aop flags left, so remove the parameter.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
There are no more aop flags left, so remove the parameter.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Pull filesystem folio updates from Matthew Wilcox:
"Primarily this series converts some of the address_space operations to
take a folio instead of a page.
Notably:
- a_ops->is_partially_uptodate() takes a folio instead of a page and
changes the type of the 'from' and 'count' arguments to make it
obvious they're bytes.
- a_ops->invalidatepage() becomes ->invalidate_folio() and has a
similar type change.
- a_ops->launder_page() becomes ->launder_folio()
- a_ops->set_page_dirty() becomes ->dirty_folio() and adds the
address_space as an argument.
There are a couple of other misc changes up front that weren't worth
separating into their own pull request"
* tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache: (53 commits)
fs: Remove aops ->set_page_dirty
fb_defio: Use noop_dirty_folio()
fs: Convert __set_page_dirty_no_writeback to noop_dirty_folio
fs: Convert __set_page_dirty_buffers to block_dirty_folio
nilfs: Convert nilfs_set_page_dirty() to nilfs_dirty_folio()
mm: Convert swap_set_page_dirty() to swap_dirty_folio()
ubifs: Convert ubifs_set_page_dirty to ubifs_dirty_folio
f2fs: Convert f2fs_set_node_page_dirty to f2fs_dirty_node_folio
f2fs: Convert f2fs_set_data_page_dirty to f2fs_dirty_data_folio
f2fs: Convert f2fs_set_meta_page_dirty to f2fs_dirty_meta_folio
afs: Convert afs_dir_set_page_dirty() to afs_dir_dirty_folio()
btrfs: Convert extent_range_redirty_for_io() to use folios
fs: Convert trivial uses of __set_page_dirty_nobuffers to filemap_dirty_folio
btrfs: Convert from set_page_dirty to dirty_folio
fscache: Convert fscache_set_page_dirty() to fscache_dirty_folio()
fs: Add aops->dirty_folio
fs: Remove aops->launder_page
orangefs: Convert launder_page to launder_folio
nfs: Convert from launder_page to launder_folio
fuse: Convert from launder_page to launder_folio
...
|
|
The inode allocation is supposed to use alloc_inode_sb(), so convert
kmem_cache_alloc() of all filesystems to alloc_inode_sb().
Link: https://lkml.kernel.org/r/20220228122126.37293-5-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Theodore Ts'o <tytso@mit.edu> [ext4]
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Alex Shi <alexs@kernel.org>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kari Argillander <kari.argillander@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Convert all callers; mostly this is just changing the aops to point
at it, but a few implementations need a little more work.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
|
|
Remove special-casing of a NULL invalidatepage, since there is no
more block_invalidatepage.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
|
|
Remove the CONFIG_BLOCK default to __set_page_dirty_buffers and just wire
that method up for the missing instances.
[hch@lst.de: ecryptfs: add a ->set_page_dirty cludge]
Link: https://lkml.kernel.org/r/20210624125250.536369-1-hch@lst.de
Link: https://lkml.kernel.org/r/20210614061512.3966143-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Tyler Hicks <code@tyhicks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has been marked with. This can be used for
additional permission checking and also to enable filesystems to
translate between uids and gids if they need to. We have implemented all
relevant helpers in earlier patches.
As requested we simply extend the exisiting inode method instead of
introducing new ones. This is a little more code churn but it's mostly
mechanical and doesnt't leave us with additional inode methods.
Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
The inode_owner_or_capable() helper determines whether the caller is the
owner of the inode or is capable with respect to that inode. Allow it to
handle idmapped mounts. If the inode is accessed through an idmapped
mount it according to the mount's user namespace. Afterwards the checks
are identical to non-idmapped mounts. If the initial user namespace is
passed nothing changes so non-idmapped mounts will see identical
behavior as before.
Similarly, allow the inode_init_owner() helper to handle idmapped
mounts. It initializes a new inode on idmapped mounts by mapping the
fsuid and fsgid of the caller from the mount's user namespace. If the
initial user namespace is passed nothing changes so non-idmapped mounts
will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-7-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Make the printk() [bfs "printf" macro] seem less severe by changing
"WARNING:" to "NOTE:".
<asm-generic/bug.h> warns us about using WARNING or BUG in a format string
other than in WARN() or BUG() family macros. bfs/inode.c is doing just
that in a normal printk() call, so change the "WARNING" string to be
"NOTE".
Link: https://lkml.kernel.org/r/20201203212634.17278-1-rdunlap@infradead.org
Reported-by: syzbot+3fd34060f26e766536ff@syzkaller.appspotmail.com
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: "Tigran A. Aivazian" <aivazian.tigran@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Get rid of boilerplate in most of ->statfs()
instances...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Some filesystem references got broken by a previous patch
series I submitted. Address those.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: David Sterba <dsterba@suse.com> # fs/affs/Kconfig
Link: https://lore.kernel.org/r/57318c53008dbda7f6f4a5a9e5787f4d37e8565a.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Fill in the appropriate limits to avoid inconsistencies
in the vfs cached inode times when timestamps are
outside the permitted range.
Even though some filesystems are read-only, fill in the
timestamps to reflect the on-disk representation.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-By: Tigran Aivazian <aivazian.tigran@gmail.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Cc: aivazian.tigran@gmail.com
Cc: al@alarsen.net
Cc: coda@cs.cmu.edu
Cc: darrick.wong@oracle.com
Cc: dushistov@mail.ru
Cc: dwmw2@infradead.org
Cc: hch@infradead.org
Cc: jack@suse.com
Cc: jaharkes@cs.cmu.edu
Cc: luisbg@kernel.org
Cc: nico@fluxnic.net
Cc: phillip@squashfs.org.uk
Cc: richard@nod.at
Cc: salah.triki@gmail.com
Cc: shaggy@kernel.org
Cc: linux-xfs@vger.kernel.org
Cc: codalist@coda.cs.cmu.edu
Cc: linux-ext4@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: jfs-discussion@lists.sourceforge.net
Cc: reiserfs-devel@vger.kernel.org
|
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have MODULE_LICENCE("GPL*") inside which was used in the initial
scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Strengthen validation of BFS superblock against corruption. Make
in-core inode bitmap static part of superblock info structure. Print a
warning when mounting a BFS filesystem created with "-N 512" option as
only 510 files can be created in the root directory. Make the kernel
messages more uniform. Update the 'prefix' passed to bfs_dump_imap() to
match the current naming of operations. White space and comments
cleanup.
Link: http://lkml.kernel.org/r/CAK+_RLkFZMduoQF36wZFd3zLi-6ZutWKsydjeHFNdtRvZZEb4w@mail.gmail.com
Signed-off-by: Tigran Aivazian <aivazian.tigran@gmail.com>
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
syzbot is reporting too large memory allocation at bfs_fill_super() [1].
Since file system image is corrupted such that bfs_sb->s_start == 0,
bfs_fill_super() is trying to allocate 8MB of continuous memory. Fix
this by adding a sanity check on bfs_sb->s_start, __GFP_NOWARN and
printf().
[1] https://syzkaller.appspot.com/bug?id=16a87c236b951351374a84c8a32f40edbc034e96
Link: http://lkml.kernel.org/r/1525862104-3407-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+71c6b5d68e91149fc8a4@syzkaller.appspotmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tigran Aivazian <aivazian.tigran@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
same story as with bfs_find_entry()
Cc: "Tigran A. Aivazian" <aivazian.tigran@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
all callers feed something->name/something->len anyway
Cc: "Tigran A. Aivazian" <aivazian.tigran@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
code is actually simpler that way.
Acked-by: "Tigran A. Aivazian" <aivazian.tigran@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
