| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If the HID or the IRQ are selected as options they will always require
loading alongside the main SDCA module. Since it will never be possible
to run without them the value of keeping them as separate modules is
fairly limited. Pull them into the main SDCA module to simplify things
still further.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250711100616.296329-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Tidy up a few bits of the SDCA Kconfig. Default both HID and IRQ to
enabled, since typically if one wants SDCA all the functionality
will be expected.
Finally, update the IRQ support to match the changes made to the
HID support.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250711100616.296329-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It is not possible to enable SND_SOC_SDCA_HID when SND_SOC_SDCA is built-in
but HID is in a loadable module, as that results in a link failure:
x86_64-linux-ld: sound/soc/sdca/sdca_functions.o: in function `find_sdca_entity_hide':
sdca_functions.c:(.text+0x25b): undefined reference to `sdca_add_hid_device'
Change SND_SOC_SDCA_HID into a 'bool' option that can only be enabled
if this results in a working build, and change the Makefile so this driver
is a loadable module if possible.
Fixes: ac558015dfd8 ("ASoC: SDCA: add a HID device for HIDE entity")
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250709152430.1498427-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a library supporting usage of SDCA interrupts, using regmap irq
framework. The library adds functions for parsing ACPI for
interrupt-related information, configuring irq chip and requesting
individual irqs. Calling code (SDCA function code) is expected to also
substitute the library's base irq handler for its own, appropriate
callback.
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250624122844.2761627-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch supports to add a HID device for SDCA HIDE entity.
The codec driver could call 'hid_input_report' to report events.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250616114929.855496-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the previously parsed DisCo information from ACPI to create DAPM
widgets and routes representing a SDCA Function. For the most part SDCA
maps well to the DAPM abstractions.
The primary point of interest is the SDCA Power Domain Entities
(PDEs), which actually control the power status of the device. Whilst
these PDEs are the primary widgets the other parts of the SDCA graph
are added to maintain a consistency with the hardware abstract,
and allow routing to take effect. As for the PDEs themselves the
code currently only handle PS0 and PS3 (basically on and off),
the two intermediate power states are not commonly used and don't
map well to ASoC/DAPM.
Other minor points of slightly complexity include, the Group Entities
(GEs) these set the value of several other controls, typically
Selector Units (SUs) for enabling a cetain jack configuration. Multiple
SUs being controlled by a GE are easily modelled creating a single
control and sharing it among the controlled muxes.
SDCA also has a slight habit of having fully connected paths, relying
more on activating the PDEs to enable functionality. This doesn't
map quite so perfectly to DAPM which considers the path a reason to
power the PDE. Whilst in the current specification Mixer Units are
defined as fixed-function, in DAPM we create a virtual control for
each input (which defaults to connected). This allows paths to be
connected/disconnected, providing a more ASoC style approach to
managing the power. PIN_SWITCHs will also be added for non-dataport
terminal entities in a later patch along with the other ALSA controls,
providing greater flexibility in power management.
A top level helper sdca_asoc_populate_component() is exported that
counts and allocates everything, however, the intermediate counting and
population functions are also exported. This will allow end drivers to
do allocation and add custom handling, which is probably fairly likely
for the early SDCA devices.
Clock muxes are currently not fully supported, so some future work will
also be required there.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add helper functions that SDCA drivers can use to calculate the
properties of SDCA Controls (registers) specified through DisCo.
Most of these are fairly obvious from the SDCA Access Modes.
DisCo Constants, values which are specified in the ACPI rather than on
the device, are handled as unreadable and unwritable registers. The
intention is these will be populated in the register defaults table
allowing drivers to read them normally. This means the drivers can be
agnostic as to which values are DisCo Constants.
Finally, support for SDCA Dual Ranked Controls is currently limited
here, at the moment the current value will be used directly. Writing
the current value directly is valid as per the specification
although the synchronicity of updates across multiple registers is
lost. Support for this will probably need to be added later. But its a
fairly hard problem and doesn't need to be solved immediately.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250217140159.2288784-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We should use *-y instead of *-objs in Makefile for the module
objects. *-objs is used rather for host programs.
Fixes: 3a513da1ae33 ("ASoC: SDCA: add initial module")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20241203141823.22393-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add new module for SDCA (SoundWire Device Class for Audio) support.
For now just add a parser to identify the SDCA revision and the
function mask.
Note that the SDCA definitions and related MIPI DisCo properties are
defined only for ACPI platforms and extracted with _DSD helpers. There
is currently no support for Device Tree in the specification, the
'depends on ACPI' reflects this design limitation. This might change
in a future revision of the specification but for SDCA 1.0 ACPI is the
only supported type of platform firmware.
The SDCA library is defined with static inline fallbacks, which will
allow for unconditional addition of SDCA support in common parts of
the code.
The design follows a four-step process:
1) Basic information related to Functions is extracted from MIPI DisCo
tables and stored in the 'struct sdw_slave'. Devm_ based memory
allocation is not allowed at this point prior to a driver probe, so we only
store the function node, address and type.
2) When a codec driver probes, it will register subdevices for each
Function identified in phase 1)
3) a driver will probe for each subdevice and addition parsing/memory
allocation takes place at this level. devm_ based allocation is highly
encouraged to make error handling manageable.
4) Before the peripheral device becomes physically attached, register
access is not permitted and the regmaps are cache-only. When
peripheral device is enumerated, the bus level uses the
'update_status' notification; after optional device-level
initialization, the codec driver will notify each of the subdevices so
that they can start interacting with the hardware.
Note that the context extracted in 1) should be arguably be handled
completely in the codec driver probe. That would however make it
difficult to use the ACPI information for machine quirks, and
e.g. select different machine driver and topologies as done for the
RT712_VB handling later in the series. To make the implementation of
quirks simpler, this patchset extracts a minimal amount of context
(interface revision and number/type of Functions) before the codec
driver probe, and stores this context in the scope of the 'struct
sdw_slave'.
The SDCA library can also be used in a vendor-specific driver without
creating subdevices, e.g. to retrieve the 'initialization-table'
values to write platform-specific values as needed.
For more technical details, the SDCA specification is available for
public downloads at https://www.mipi.org/mipi-sdca-v1-0-download
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241016102333.294448-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
