aboutsummaryrefslogtreecommitdiffstats
path: root/tools/power/x86 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2025-10-01Merge tag 'pm-6.18-rc1' of ↵Linus Torvalds5-51/+130
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "The majority of these are cpufreq changes, which has been a recurring pattern for a few recent cycles. Those changes include new hardware support (AN7583 SoC support in the airoha cpufreq driver, ipq5424 support in the qcom-nvmem cpufreq driver, MT8196 support in the mediatek cpufreq driver, AM62D2 support in the ti cpufreq driver), DT bindings and Rust code updates, cleanups of the core and governors, and multiple driver fixes and cleanups. Beyond that, there are hibernation fixes (some remaining 6.16 cycle fallout and an issue related to hybrid suspend in the amdgpu driver), cleanups of the PM core code, runtime PM documentation update, cpuidle and power capping cleanups, and tooling updates. Specifics: - Rearrange variable declarations involving __free() in the cpufreq core and intel_pstate driver to follow common coding style (Rafael Wysocki) - Fix object lifecycle issue in update_qos_request(), rearrange freq QoS updates using __free(), and adjust frequency percentage computations in the intel_pstate driver (Rafael Wysocki) - Update intel_pstate to allow it to enable HWP without EPP if the new DEC (Dynamic Efficiency Control) HW feature is enabled (Rafael Wysocki) - Use on_each_cpu_mask() in drv_write() in the ACPI cpufreq driver to simplify the code (Rafael Wysocki) - Use likely() optimization in intel_pstate_sample() (Yaxiong Tian) - Remove dead EPB-related code from intel_pstate (Srinivas Pandruvada) - Use scope-based cleanup for cpufreq policy references in multiple cpufreq drivers (Zihuan Zhang) - Avoid calling get_governor() for the first policy in the cpufreq core to simplify the initial policy path (Zihuan Zhang) - Clean up the cpufreq core in multiple places (Zihuan Zhang) - Use int type to store negative error codes in the cpufreq core and update the speedstep-lib to use int for error codes (Qianfeng Rong) - Update the efficient idle check for Intel extended Families in the ondemand cpufreq governor (Sohil Mehta) - Replace sscanf() with kstrtouint() in the conservative cpufreq governor (Kaushlendra Kumar) - Rename CpumaskVar::as[_mut]_ref to from_raw[_mut] in the cpumask Rust code and mark CpumaskVar as transparent (Alice Ryhl, Baptiste Lepers) - Update ARef and AlwaysRefCounted imports from sync::aref in the OPP Rust code (Shankari Anand) - Add support for AN7583 SoC to the airoha cpufreq driver (Christian Marangi) - Enable cpufreq for ipq5424 in the qcom-nvmem cpufreq driver (Md Sadre Alam) - Add support for MT8196 to the mediatek-hw cpufreq driver, refactor that driver and add mediatek,mt8196-cpufreq-hw DT binding (Nicolas Frattaroli) - Avoid redundant conditions in the mediatek cpufreq driver (Liao Yuanhong) - Add support for AM62D2 to the ti cpufreq driver and blocklist ti,am62d2 SoC in dt-platdev (Paresh Bhagat) - Support more speed grades on AM62Px SoC in the ti cpufreq driver, allow all silicon revisions to support OPPs in it, and fix supported hardware for 1GHz OPP (Judith Mendez) - Add QCS615 compatible to DT bindings for cpufreq-qcom-hw (Taniya Das) - Minor assorted updates of the scmi, longhaul, CPPC, and armada-37xx cpufreq drivers (Akhilesh Patil, BowenYu, Dennis Beier, and Florian Fainelli) - Remove outdated cpufreq-dt.txt (Frank Li) - Fix python gnuplot package names in the amd_pstate_tracer utility (Kuan-Wei Chiu) - Saravana Kannan will maintain the virtual-cpufreq driver (Saravana Kannan) - Prevent CPU capacity updates after registering a perf domain from failing on a first CPU that is not present (Christian Loehle) - Add support for the cases in which frequency alone is not sufficient to uniquely identify an OPP (Krishna Chaitanya Chundru) - Use to_result() for OPP error handling in Rust (Onur Özkan) - Add support for LPDDR5 on Rockhip RK3588 SoC to rockchip-dfi devfreq driver (Nicolas Frattaroli) - Fix an issue where DDR cycle counts on RK3588/RK3528 with LPDDR4(X) are reported as half by adding a cycle multiplier to the DFI driver in rockchip-dfi devfreq-event driver (Nicolas Frattaroli) - Fix missing error pointer dereference check of regulator instance in the mtk-cci devfreq driver probe and remove a redundant condition from an if () statement in that driver (Dan Carpenter, Liao Yuanhong) - Fail cpuidle device registration if there is one already to avoid sysfs-related issues (Rafael Wysocki) - Use sysfs_emit()/sysfs_emit_at() instead of sprintf()/scnprintf() in cpuidle (Vivek Yadav) - Fix device and OF node leaks at probe in the qcom-spm cpuidle driver and drop unnecessary initialisations from it (Johan Hovold) - Remove unnecessary address-of operators from the intel_idle cpuidle driver (Kaushlendra Kumar) - Rearrange main loop in menu_select() to make the code in that funtion easier to follow (Rafael Wysocki) - Convert values in microseconds to ktime using us_to_ktime() where applicable in the intel_idle power capping driver (Xichao Zhao) - Annotate loops walking device links in the power management core code as _srcu and add macros for walking device links to reduce the likelihood of coding mistakes related to them (Rafael Wysocki) - Document time units for *_time functions in the runtime PM API (Brian Norris) - Clear power.must_resume in noirq suspend error path to avoid resuming a dependant device under a suspended parent or supplier (Rafael Wysocki) - Fix GFP mask handling during hybrid suspend and make the amdgpu driver handle hybrid suspend correctly (Mario Limonciello, Rafael Wysocki) - Fix GFP mask handling after aborted hibernation in platform mode and combine exit paths in power_down() to avoid code duplication (Rafael Wysocki) - Use vmalloc_array() and vcalloc() in the hibernation core to avoid open-coded size computations (Qianfeng Rong) - Fix typo in hibernation core code comment (Li Jun) - Call pm_wakeup_clear() in the same place where other functions that do bookkeeping prior to suspend_prepare() are called (Samuel Wu) - Fix and clean up the x86_energy_perf_policy utility and update its documentation (Len Brown, Kaushlendra Kumar) - Fix incorrect sorting of PMT telemetry in turbostat (Kaushlendra Kumar) - Fix incorrect size in cpuidle_state_disable() and the error return value of cpupower_write_sysfs() in cpupower (Kaushlendra Kumar)" * tag 'pm-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits) PM: hibernate: Combine return paths in power_down() PM: hibernate: Restrict GFP mask in power_down() PM: hibernate: Fix pm_hibernation_mode_is_suspend() build breakage PM: runtime: Documentation: ABI: Document time units for *_time tools/power x86_energy_perf_policy.8: Emphasize preference for SW interfaces tools/power x86_energy_perf_policy: Add make snapshot target tools/power x86_energy_perf_policy: Prefer driver HWP limits tools/power x86_energy_perf_policy: EPB access is only via sysfs tools/power x86_energy_perf_policy: Prepare for MSR/sysfs refactoring tools/power x86_energy_perf_policy: Enhance HWP enable tools/power x86_energy_perf_policy: Enhance HWP enabled check tools/power x86_energy_perf_policy: Fix incorrect fopen mode usage tools/power turbostat: Fix incorrect sorting of PMT telemetry drm/amd: Fix hybrid sleep PM: hibernate: Add pm_hibernation_mode_is_suspend() PM: hibernate: Fix hybrid-sleep tools/cpupower: Fix incorrect size in cpuidle_state_disable() tools/power/x86/amd_pstate_tracer: Fix python gnuplot package names cpufreq: Replace pointer subtraction with iteration macro cpuidle: Fail cpuidle device registration if there is one already ...
2025-09-29Merge branch 'pm-tools'Rafael J. Wysocki4-50/+129
Merge power management utilities updates for 6.18-rc1: - Fix and clean up the x86_energy_perf_policy utility and update its documentation (Len Brown, Kaushlendra Kumar) - Fix incorrect sorting of PMT telemetry in turbostat (Kaushlendra Kumar) - Fix incorrect size in cpuidle_state_disable() and the error return value of cpupower_write_sysfs() in cpupower (Kaushlendra Kumar) * pm-tools: tools/power x86_energy_perf_policy.8: Emphasize preference for SW interfaces tools/power x86_energy_perf_policy: Add make snapshot target tools/power x86_energy_perf_policy: Prefer driver HWP limits tools/power x86_energy_perf_policy: EPB access is only via sysfs tools/power x86_energy_perf_policy: Prepare for MSR/sysfs refactoring tools/power x86_energy_perf_policy: Enhance HWP enable tools/power x86_energy_perf_policy: Enhance HWP enabled check tools/power x86_energy_perf_policy: Fix incorrect fopen mode usage tools/power turbostat: Fix incorrect sorting of PMT telemetry tools/cpupower: Fix incorrect size in cpuidle_state_disable() tools/cpupower: fix error return value in cpupower_write_sysfs()
2025-09-26Merge tag 'power-utilities-for-v6.18-merge' of ↵Rafael J. Wysocki4-50/+129
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Merge turbostat and x86_energy_perf_policy bug fixes for v6.18 merge window from Len Brown. * tag 'power-utilities-for-v6.18-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power x86_energy_perf_policy.8: Emphasize preference for SW interfaces tools/power x86_energy_perf_policy: Add make snapshot target tools/power x86_energy_perf_policy: Prefer driver HWP limits tools/power x86_energy_perf_policy: EPB access is only via sysfs tools/power x86_energy_perf_policy: Prepare for MSR/sysfs refactoring tools/power x86_energy_perf_policy: Enhance HWP enable tools/power x86_energy_perf_policy: Enhance HWP enabled check tools/power x86_energy_perf_policy: Fix incorrect fopen mode usage tools/power turbostat: Fix incorrect sorting of PMT telemetry
2025-09-25tools/power x86_energy_perf_policy.8: Emphasize preference for SW interfacesLen Brown1-4/+11
This tool was originally written when Linux had no standard interface for EPB, or HWP support. Retain the capability to manage a system w/o any kernel PM support, but prefer the standard kernel interfaces, when avaialble. (not doing so led to a confusing conflict between a p-state limit request made via cpufreq and modified by the intel-pstate driver, versus the raw MSR write made by this utility) Signed-off-by: Len Brown <len.brown@intel.com>
2025-09-25tools/power x86_energy_perf_policy: Add make snapshot targetLen Brown1-1/+28
$ make snapshot creates x86_energy_perf_policy-$(DATE).tar.gz Which can be transported to a target machine without needing a kernel tree to build on the target. Useful for creating debug versions. Signed-off-by: Len Brown <len.brown@intel.com>
2025-09-25tools/power x86_energy_perf_policy: Prefer driver HWP limitsLen Brown1-4/+9
When we are successful in using cpufreq min/max limits, skip setting the raw MSR limits entirely. This is necessary to avoid undoing any modification that the cpufreq driver makes to our sysfs request. eg. intel_pstate may take our request for a limit that is valid according to HWP.CAP.MIN/MAX and clip it to be within the range available in PLATFORM_INFO. Signed-off-by: Len Brown <len.brown@intel.com>
2025-09-25tools/power x86_energy_perf_policy: EPB access is only via sysfsLen Brown1-9/+16
Comprehend that EPB writes are now only via sysfs by moving it out of the _msr specific path. No functional change. Signed-off-by: Len Brown <len.brown@intel.com>
2025-09-25tools/power x86_energy_perf_policy: Prepare for MSR/sysfs refactoringLen Brown1-19/+19
Rename routines to make "_msr" and "_sysfs" access methods clear No functional change Signed-off-by: Len Brown <len.brown@intel.com>
2025-09-25tools/power x86_energy_perf_policy: Enhance HWP enableLen Brown1-4/+9
On enabling HWP, preserve the reserved bits in MSR_PM_ENABLE. Also, skip writing the MSR_PM_ENABLE if HWP is already enabled. Signed-off-by: Len Brown <len.brown@intel.com>
2025-09-25tools/power x86_energy_perf_policy: Enhance HWP enabled checkLen Brown1-8/+36
Verify that all CPUs have HWP enabled, not just cpu0. Signed-off-by: Len Brown <len.brown@intel.com>
2025-09-25tools/power x86_energy_perf_policy: Fix incorrect fopen mode usageKaushlendra Kumar1-2/+2
The fopen_or_die() function was previously hardcoded to open files in read-only mode ("r"), ignoring the mode parameter passed to it. This patch corrects fopen_or_die() to use the provided mode argument, allowing for flexible file access as intended. Additionally, the call to fopen_or_die() in err_on_hypervisor() incorrectly used the mode "ro", which is not a valid fopen mode. This is fixed to use the correct "r" mode. Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-09-25tools/power turbostat: Fix incorrect sorting of PMT telemetryKaushlendra Kumar1-1/+1
The pmt_telemdir_sort() comparison function was returning a boolean value (0 or 1) instead of the required negative, zero, or positive value for proper sorting. This caused unpredictable and incorrect ordering of telemetry directories named telem0, telem1, ..., telemN. Update the comparison logic to return -1, 0, or 1 based on the numerical value extracted from the directory name, ensuring correct numerical ordering when using scandir. This change improves stability and correctness when iterating PMT telemetry directories. Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-09-23tools/power/x86/amd_pstate_tracer: Fix python gnuplot package namesKuan-Wei Chiu1-1/+1
The prerequisites section listed non-existent packages "phython-gnuplot" and "phython3-gnuplot", which may mislead users and cause installation failures. Update the names to the correct distribution package names "python-gnuplot" and "python3-gnuplot", helping users avoid confusion and saving time for those following the instructions. Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
2025-09-17x86/cpu: Rename and move CPU model entry for Diamond RapidsTony Luck1-1/+1
This model was added as INTEL_PANTHERCOVE_X (based on the name of the core) with a comment that the platform name is Diamond Rapids. It was also placed at the end of the file in a new section for family 19 processors. This is different from previous naming as Andrew Cooper noted. PeterZ agreed and posted a patch[1] to fix the name and move it in sequence with other Xeon servers. But without a commit description or sign-off the patch wasn't ever applied. Patch updated to cover one additional use of the #define by turbostat and to change the "Family 6" comment to also list 18 and 19 since new models in these families are mixed in with family 6. Originally-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Sohil Mehta <sohil.mehta@intel.com> Link: https://lore.kernel.org/all/20250214130205.GK14028@noisy.programming.kicks-ass.net/ # [1]
2025-08-10Merge tag 'turbostat-2025.09.09' of ↵Linus Torvalds2-225/+554
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown: "tools/power turbostat: version 2025.09.09 - Probe and display L3 Cache topology - Add ability to average an added counter (useful for pre-integrated "counters", such as Watts) - Break the limit of 64 built-in counters - Assorted bug fixes and minor feature tweaks" * tag 'turbostat-2025.09.09' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: version 2025.09.09 tools/power turbostat: Handle non-root legacy-uncore sysfs permissions tools/power turbostat: standardize PER_THREAD_PARAMS tools/power turbostat: Fix DMR support tools/power turbostat: add format "average" for external attributes tools/power turbostat: delete GET_PKG() tools/power turbostat: probe and display L3 cache topology tools/power turbostat: Support more than 64 built-in-counters tools/power turbostat.8: Document Totl%C0, Any%C0, GFX%C0, CPUGFX% columns tools/power turbostat: Fix bogus SysWatt for forked program tools/power turbostat: Handle cap_get_proc() ENOSYS tools/power turbostat: Fix build with musl tools/power turbostat: verify arguments to params --show and --hide tools/power turbostat: regression fix: --show C1E%
2025-08-09tools/power turbostat: version 2025.09.09Len Brown1-1/+1
Probe and display L3 Cache topology Add ability to average an added counter (useful for pre-integrated "counters", such as Watts) Break the limit of 64 built-in counters. Assorted bug fixes and minor feature tweaks Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-09tools/power turbostat: Handle non-root legacy-uncore sysfs permissionsLen Brown1-1/+2
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/ may be readable by all, but /sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/current_freq_khz may be readable only by root. Non-root turbostat users see complaints in this scenario. Fail probe of the interface if we can't read current_freq_khz. Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Original-patch-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-09tools/power turbostat: standardize PER_THREAD_PARAMSLen Brown1-20/+22
use a macro for PER_THREAD_PARAMS to make adding one later more clear. no functional change Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-09tools/power turbostat: Fix DMR supportZhang Rui1-14/+15
Together with the RAPL MSRs, there are more MSRs gone on DMR, including PLR (Perf Limit Reasons), and IRTL (Package cstate Interrupt Response Time Limit) MSRs. The configurable TDP info should also be retrieved from TPMI based Intel Speed Select Technology feature. Remove the access of these MSRs for DMR. Improve the DMR platform feature table to make it more readable at the same time. Fixes: 83075bd59de2 ("tools/power turbostat: Add initial support for DMR") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-09tools/power turbostat: add format "average" for external attributesMichael Hebenstreit2-11/+22
External atributes with format "raw" are not printed in summary lines for nodes/packages (or with option -S). The new format "average" behaves like "raw" but also adds the summary data Signed-off-by: Michael Hebenstreit <michael.hebenstreit@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-09tools/power turbostat: delete GET_PKG()Len Brown1-15/+6
pkg_base[pkg_id] is a simple array of structure pointers, let the compiler treat it that way. Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-09tools/power turbostat: probe and display L3 cache topologyLen Brown1-3/+31
Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-09tools/power turbostat: Support more than 64 built-in-countersLen Brown1-154/+406
We have out-grown the ability to use a 64-bit memory location to inventory every possible built-in counter. Leverage the the CPU_SET(3) macros to break this barrier. Also, break the Joules & Watts counters into two, since we can no longer 'or' them together... Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-09tools/power turbostat.8: Document Totl%C0, Any%C0, GFX%C0, CPUGFX% columnsLen Brown1-0/+8
Explain the meaning of the Totl%C0, Any%C0, GFX%C0, CPUGFX% columns. Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-08tools/power turbostat: Fix bogus SysWatt for forked programZhang Rui1-0/+1
Similar to delta_cpu(), delta_platform() is called in turbostat main loop. This ensures accurate SysWatt readings in periodic monitoring mode $ sudo turbostat -S -q --show power -i 1 CoreTmp PkgTmp PkgWatt CorWatt GFXWatt RAMWatt PKG_% RAM_% SysWatt 60 61 6.21 1.13 0.16 0.00 0.00 0.00 13.07 58 61 6.00 1.07 0.18 0.00 0.00 0.00 12.75 58 61 5.74 1.05 0.17 0.00 0.00 0.00 12.22 58 60 6.27 1.11 0.24 0.00 0.00 0.00 13.55 However, delta_platform() is missing for forked program and causes bogus SysWatt reporting, $ sudo turbostat -S -q --show power sleep 1 1.004736 sec CoreTmp PkgTmp PkgWatt CorWatt GFXWatt RAMWatt PKG_% RAM_% SysWatt 57 58 6.05 1.02 0.16 0.00 0.00 0.00 0.03 Add missing delta_platform() for forked program. Fixes: e5f687b89bc2 ("tools/power turbostat: Add RAPL psys as a built-in counter") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-08tools/power turbostat: Handle cap_get_proc() ENOSYSCalvin Owens1-1/+9
Kernels configured with CONFIG_MULTIUSER=n have no cap_get_proc(). Check for ENOSYS to recognize this case, and continue on to attempt to access the requested MSRs (such as temperature). Signed-off-by: Calvin Owens <calvin@wbinvd.org> Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-08tools/power turbostat: Fix build with muslCalvin Owens1-0/+1
turbostat.c: In function 'parse_int_file': turbostat.c:5567:19: error: 'PATH_MAX' undeclared (first use in this function) 5567 | char path[PATH_MAX]; | ^~~~~~~~ turbostat.c: In function 'probe_graphics': turbostat.c:6787:19: error: 'PATH_MAX' undeclared (first use in this function) 6787 | char path[PATH_MAX]; | ^~~~~~~~ Signed-off-by: Calvin Owens <calvin@wbinvd.org> Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-08-08tools/power turbostat: verify arguments to params --show and --hideLen Brown1-2/+31
$ sudo turbostat --quiet --show junk turbostat: Counter 'junk' can not be added. Previously, invalid arguments to --show and --hide were silently ignored Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-09tools/power turbostat: regression fix: --show C1E%Len Brown1-4/+0
The new default idle counter groupings broke "--show C1E%" (or any other C-state %) Also delete a stray debug printf from the same offending commit. Reported-by: Zhang Rui <rui.zhang@intel.com> Fixes: ec4acd3166d8 ("tools/power turbostat: disable "cpuidle" invocation counters, by default") Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08Merge tag 'turbostat-2025.06.08' of ↵Linus Torvalds2-110/+364
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown: - Add initial DMR support, which required smarter RAPL probe - Fix AMD MSR RAPL energy reporting - Add RAPL power limit configuration output - Minor fixes * tag 'turbostat-2025.06.08' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: version 2025.06.08 tools/power turbostat: Add initial support for BartlettLake tools/power turbostat: Add initial support for DMR tools/power turbostat: Dump RAPL sysfs info tools/power turbostat: Avoid probing the same perf counters tools/power turbostat: Allow probing RAPL with platform_features->rapl_msrs cleared tools/power turbostat: Clean up add perf/msr counter logic tools/power turbostat: Introduce add_msr_counter() tools/power turbostat: Remove add_msr_perf_counter_() tools/power turbostat: Remove add_cstate_perf_counter_() tools/power turbostat: Remove add_rapl_perf_counter_() tools/power turbostat: Quit early for unsupported RAPL counters tools/power turbostat: Always check rapl_joules flag tools/power turbostat: Fix AMD package-energy reporting tools/power turbostat: Fix RAPL_GFX_ALL typo tools/power turbostat: Add Android support for MSR device handling tools/power turbostat.8: pm_domain wording fix tools/power turbostat.8: fix typo: idle_pct should be pct_idle
2025-06-08tools/power turbostat: version 2025.06.08Len Brown1-37/+36
Add initial DMR support, which required smarter RAPL probe Fix AMD MSR RAPL energy reporting Add RAPL power limit configuration output Minor fixes Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Add initial support for BartlettLakeZhang Rui1-0/+1
Add initial support for BartlettLake. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Add initial support for DMRZhang Rui1-0/+18
Add initial support for DMR. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Dump RAPL sysfs infoZhang Rui1-0/+156
for example: intel-rapl:1: psys 28.0s:100W 976.0us:100W intel-rapl:0: package-0 28.0s:57W,max:15W 2.4ms:57W intel-rapl:0/intel-rapl:0:0: core disabled intel-rapl:0/intel-rapl:0:1: uncore disabled intel-rapl-mmio:0: package-0 28.0s:28W,max:15W 2.4ms:57W [lenb: simplified format] Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> squish me Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Avoid probing the same perf countersZhang Rui1-0/+15
For the RAPL package energy status counter, Intel and AMD share the same perf_subsys and perf_name, but with different MSR addresses. Both rapl_counter_arch_infos[0] and rapl_counter_arch_infos[1] are introduced to describe this counter for different Vendors. As a result, the perf counter is probed twice, and causes a failure in in get_rapl_counters() because expected_read_size and actual_read_size don't match. Fix the problem by skipping the already probed counter. Note, this is not a perfect fix. For example, if different vendors/platforms use the same MSR value for different purpose, the code can be fooled when it probes a rapl_counter_arch_infos[] entry that does not belong to the running Vendor/Platform. In a long run, better to put rapl_counter_arch_infos[] into the platform_features so that this becomes Vendor/Platform specific. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Allow probing RAPL with platform_features->rapl_msrs ↵Zhang Rui1-25/+24
cleared platform_features->rapl_msrs describes the RAPL MSRs supported. While RAPL Perf counters can be exposed from different kernel backend drivers, e.g. RAPL MSR I/F driver, or RAPL TPMI I/F driver. Thus, turbostat should first blindly probe all the available RAPL Perf counters, and falls back to the RAPL MSR counters if they are listed in platform_features->rapl_msrs. With this, platforms that don't have RAPL MSRs can clear the platform_features->rapl_msrs bits and use RAPL Perf counters only. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Clean up add perf/msr counter logicZhang Rui1-7/+18
Increase the code readability by moving the no_perf/no_msr flag and the cai->perf_name/cai->msr sanity checks into the counter probe functions. No functional change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Introduce add_msr_counter()Zhang Rui1-9/+23
probe_rapl_msr() is reused for probing RAPL MSR counters, cstate MSR counters and MPERF/APERF/SMI MSR counters, thus its name is misleading. Similar to add_perf_counter(), introduce add_msr_counter() to probe a counter via MSR. Introduce wrapper function add_rapl_msr_counter() at the same time to add extra check for Zero return value for specified RAPL counters. No functional change intended. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Remove add_msr_perf_counter_()Zhang Rui1-12/+8
As the only caller of add_msr_perf_counter_(), add_msr_perf_counter() just gives extra debug output on top. There is no need to keep both functions. Remove add_msr_perf_counter_() and move all the logic to add_msr_perf_counter(). No functional change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Remove add_cstate_perf_counter_()Zhang Rui1-13/+9
As the only caller of add_cstate_perf_counter_(), add_cstate_perf_counter() just gives extra debug output on top. There is no need to keep both functions. Remove add_cstate_perf_counter_() and move all the logic to add_cstate_perf_counter(). No functional change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Remove add_rapl_perf_counter_()Zhang Rui1-15/+10
As the only caller of add_rapl_perf_counter_(), add_rapl_perf_counter() just gives extra debug output on top. There is no need to keep both functions. Remove add_rapl_perf_counter_() and move all the logic to add_rapl_perf_counter(). No functional change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Quit early for unsupported RAPL countersZhang Rui1-1/+4
Quit early for unsupported RAPL counters. No functional change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Always check rapl_joules flagZhang Rui1-3/+9
rapl_joules bit should always be checked even if platform_features->rapl_msrs is not set or no_msr flag is used. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Fix AMD package-energy reportingGautham R. Shenoy1-5/+36
commit 05a2f07db888 ("tools/power turbostat: read RAPL counters via perf") that adds support to read RAPL counters via perf defines the notion of a RAPL domain_id which is set to physical_core_id on platforms which support per_core_rapl counters (Eg: AMD processors Family 17h onwards) and is set to the physical_package_id on all the other platforms. However, the physical_core_id is only unique within a package and on platforms with multiple packages more than one core can have the same physical_core_id and thus the same domain_id. (For eg, the first cores of each package have the physical_core_id = 0). This results in all these cores with the same physical_core_id using the same entry in the rapl_counter_info_perdomain[]. Since rapl_perf_init() skips the perf-initialization for cores whose domain_ids have already been visited, cores that have the same physical_core_id always read the perf file corresponding to the physical_core_id of the first package and thus the package-energy is incorrectly reported to be the same value for different packages. Note: This issue only arises when RAPL counters are read via perf and not when they are read via MSRs since in the latter case the MSRs are read separately on each core. Fix this issue by associating each CPU with rapl_core_id which is unique across all the packages in the system. Fixes: 05a2f07db888 ("tools/power turbostat: read RAPL counters via perf") Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Fix RAPL_GFX_ALL typoKaushlendra Kumar1-1/+1
Fix typo in the currently unused RAPL_GFX_ALL macro definition. Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Add Android support for MSR device handlingKaushlendra Kumar1-3/+17
It uses /dev/msrN device paths on Android instead of /dev/cpu/N/msr, updates error messages and permission checks to reflect the Android device path, and wraps platform-specific code with #if defined(ANDROID) to ensure correct behavior on both Android and non-Android systems. These changes improve compatibility and usability of turbostat on Android devices. Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat.8: pm_domain wording fixLen Brown1-2/+2
turbostat.8: clarify that uncore "domains" are Power Management domains, aka pm_domains. Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat.8: fix typo: idle_pct should be pct_idleLen Brown1-1/+1
idle_pct should be pct_idle Signed-off-by: Len Brown <len.brown@intel.com>
2025-05-09tools/power/x86/intel-speed-select: v1.23 releaseSrinivas Pandruvada1-1/+1
This version includes the following changes: - Displays SST-PP2 revision fields. - Skips updating uncore frequency limits on newer generations of CPUs. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2025-05-09tools/power/x86/intel-speed-select: Skip uncore frequency updateSrinivas Pandruvada1-1/+12
On SST PP level switch, skip adjusting the uncore frequency limit and allow the hardware to handle this on newer platforms. As newer generations of CPUs have changed the extended family identifier, use this identifier to exclude the update. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2026-01-10 05:56:51 +0000