| Age | Commit message (Collapse) | Author | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: pci: fix array indexing
For large amounts of PCI devices its possible to overrun the arrays as
the index was miscalculated in 2 places.
|
|
The current implementation of aisb calculation will erroneously index
via an unsigned long * as well as multiply by 8B for every 64-bits in
the offset; only one or the other is required. This throws off aisb
calculations once the number of devices exceeds 64, and can result
in out-of-bounds access as well as failure to indicate summary bits
associated with those devices in guests.
Fix this by converting to a physical address before applying the
offset, as is already done in arch/s390/pci/pci_irq.c.
Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
kvm_s390_pci_aif_enable(), kvm_s390_pci_aif_disable(), and
aen_host_forward() index the GAIT by manually multiplying the index
with sizeof(struct zpci_gaite).
Since aift->gait is already a struct zpci_gaite pointer, this
double-scales the offset, accessing element aisb*16 instead of aisb.
This causes out-of-bounds accesses when aisb >= 32 (with
ZPCI_NR_DEVICES=512)
Fix by removing the erroneous sizeof multiplication.
Fixes: 3c5a1b6f0a18 ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding")
Fixes: 73f91b004321 ("KVM: s390: pci: enable host forwarding of Adapter Event Notifications")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- ESA nesting support
- 4k memslots
- LPSW/E fix
|
|
Introduce a new boolean flag, used for shadow gmaps, to keep track of
whether the gmap has been invalidated, either partially or totally.
Use the new flag to check whether shadow gmap invalidations happened
during shadowing. In such cases, abort whatever was going on, return
-EAGAIN and let the caller try again.
Fixes: 19d6c5b80443 ("KVM: s390: vsie: Fix unshadowing while shadowing")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260407161721.247044-1-imbrenda@linux.ibm.com>
|
|
Fix memslots handling for UCONTROL guests. Attempts to delete user
memslots will fail, as they should, without the risk of a NULL pointer
dereference.
Fixes: 413c98f24c63 ("KVM: s390: fake memslot for ucontrol VMs")
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Until now memslots on s390 needed to have 1M granularity and be 1M
aligned. Since the new gmap code can handle memslots with 4k
granularity and alignment, remove the restrictions.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
When backing a guest page with a large page, check that the alignment
of the guest page matches the alignment of the host physical page
backing it within the large page.
Also check that the memslot is large enough to fit the large page.
Those checks are currently not needed, because memslots are guaranteed
to be 1m-aligned, but this will change.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add _{SEGMENT,REGION3}_FR_MASK, similar to _{SEGMENT,REGION3}_MASK, but
working on gfn/pfn instead of addresses. Use them in gaccess.c instead
of using the normal masks plus gpa_to_gfn().
Also add _PAGES_PER_{SEGMENT,REGION3} to make future code more readable.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Now that all the bits are properly addressed, provide a mechanism
for testing ESA mode guests in nested configurations.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
[farman@us.ibm.com: Updated commit message]
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
The prefix page address occupies a different number
of bits for z/Architecture versus ESA mode. Adjust the
definition to cover both, and permit an ESA mode
address within the nested codepath.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
In the event that a nested guest is put in ESA mode,
ensure that some bits are scrubbed from the shadow SCB.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
Linux/KVM runs in z/Architecture-only mode. Although z/Architecture
is built upon a long history of hardware refinements, any other
CPU mode is not permitted.
Allow a userspace to explicitly enable the use of ESA mode for
nested guests, otherwise usage will be rejected.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
LPSW and LPSWE need to set the gbea on completion but currently don't.
Time to fix this up.
LPSWEY was designed to not set the bear.
Fixes: 48a3e950f4cee ("KVM: s390: Add support for machine checks.")
Reported-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
Routine __inject_service() may set both the SERVICE and SERVICE_EV
pending bits, and in the case of a pure service event the corresponding
trip through __deliver_service_ev() will clear the SERVICE_EV bit only.
This necessitates an additional trip through __deliver_service() for
the other pending interrupt bit, however it is possible that the
external interrupt parameters are zero and there is nothing to be
delivered to the guest.
To avoid sending empty data to the guest, let's only write out the SCLP
data when there is something for the guest to do, otherwise bail out.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
A previous commit changed the behaviour of the KVM_S390_VCPU_FAULT
ioctl. The current (wrong) implementation will trigger a guest
addressing exception if the requested address lies outside of a
memslot, unless the VM is UCONTROL.
Restore the previous behaviour by open coding the fault-in logic.
Fixes: 3762e905ec2e ("KVM: s390: use __kvm_faultin_pfn()")
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
When shadowing, the guest page tables are write-protected, in order to
trap changes and properly unshadow the shadow mapping for the nested
guest. Already shadowed levels are skipped, so that only the needed
levels are write protected.
Currently the levels that get write protected are exactly one level too
deep: the last level (nested guest memory) gets protected in the wrong
way, and will be protected again correctly a few lines afterwards; most
importantly, the highest non-shadowed level does *not* get write
protected.
Moreover, if the nested guest is running in a real address space, there
are no DAT tables to shadow.
Write protect the correct levels, so that all the levels that need to
be protected are protected, and avoid double protecting the last level;
skip attempting to shadow the DAT tables when the nested guest is
running in a real address space.
Fixes: e38c884df921 ("KVM: s390: Switch to new gmap")
Tested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
If shadowing causes the shadow gmap to get unshadowed, exit early to
prevent an attempt to dereference the parent pointer, which at this
point is NULL.
Opportunistically add some more checks to prevent NULL parents.
Fixes: a2c17f9270cc ("KVM: s390: New gmap code")
Fixes: e5f98a6899bd ("KVM: s390: Add some helper functions needed for vSIE")
Fixes: e38c884df921 ("KVM: s390: Switch to new gmap")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
In most cases gmap_put() was not called when it should have.
Add the missing gmap_put() in vsie_run().
Fixes: e38c884df921 ("KVM: s390: Switch to new gmap")
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Fix _do_shadow_pte() to use the correct pointer (guest pte instead of
nested guest) to set up the new pte.
Add a check to return -EOPNOTSUPP if the mapping for the nested guest
is writeable but the same page in the guest is only read-only.
Fixes: e38c884df921 ("KVM: s390: Switch to new gmap")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Introduce a new special softbit for large pages, like already presend
for normal pages, and use it to mark guest mappings that do not have
struct pages.
Whenever a leaf DAT entry becomes dirty, check the special softbit and
only call SetPageDirty() if there is an actual struct page.
Move the logic to mark pages dirty inside _gmap_ptep_xchg() and
_gmap_crstep_xchg_atomic(), to avoid needlessly duplicating the code.
Fixes: 5a74e3d93417 ("KVM: s390: KVM-specific bitfields and helper functions")
Fixes: a2c17f9270cc ("KVM: s390: New gmap code")
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
The slow path of the fault handler ultimately called gmap_link(), which
assumed the fault was a major fault, and blindly called dat_link().
In case of minor faults, things were not always handled properly; in
particular the prefix and vsie marker bits were ignored.
Move dat_link() into gmap.c, renaming it accordingly. Once moved, the
new _gmap_link() function will be able to correctly honour the prefix
and vsie markers.
This will cause spurious unshadows in some uncommon cases.
Fixes: 94fd9b16cc67 ("KVM: s390: KVM page table management functions: lifecycle management")
Fixes: a2c17f9270cc ("KVM: s390: New gmap code")
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
When shadowing a nested guest, a check is performed and no shadowing is
attempted if the nested guest is already shadowed.
The existing check was incomplete; fix it by also checking whether the
leaf DAT table entry in the existing shadow gmap has the same protection
as the one specified in the guest DAT entry.
Fixes: e38c884df921 ("KVM: s390: Switch to new gmap")
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
In practice dat_crstep_xchg() is racy and hard to use correctly. Simply
remove it and replace its uses with dat_crstep_xchg_atomic().
This solves some actual races that lead to system hangs / crashes.
Opportunistically fix an alignment issue in _gmap_crstep_xchg_atomic().
Fixes: 589071eaaa8f ("KVM: s390: KVM page table management functions: clear and replace")
Fixes: 94fd9b16cc67 ("KVM: s390: KVM page table management functions: lifecycle management")
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
If the guest misbehaves and puts the page tables for its nested guest
inside the memory of the nested guest itself, and the guest and nested
guest are being mapped with large pages, the shadow mapping will
lose synchronization with the actual mapping, since this will cause the
large page with the vsie notification bit to be split, but the
vsie notification bit will not be propagated to the resulting small
pages.
Fix this by propagating the vsie_notif bit from large pages to normal
pages when splitting a large page.
Fixes: 2db149a0a6c5 ("KVM: s390: KVM page table management functions: walks")
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Fixes for 7.0
- fix deadlock in new memory management
- handle kernel faults on donated memory properly
- fix bounds checking for irq routing + selftest
- fix invalid machine checks + logging
|
|
The recent XFER_TO_GUEST_WORK change resulted in a situation, where the
vsie code would interpret a signal during work as a machine check during
SIE as both use the EINTR return code.
The exit_reason of the sie64a function has nothing to do with the
kvm_run exit_reason. Rename it and define a specific code for machine
checks instead of abusing -EINTR.
rename exit_reason into sie_return to avoid the naming conflict
and change the code flow in vsie.c to have a separate variable for rc
and sie_return.
Fixes: 2bd1337a1295e ("KVM: s390: Use generic VIRT_XFER_TO_GUEST_WORK functions")
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
KVM will reinject machine checks that happen during guest activity.
From a host perspective this machine check is no longer visible
and even for the guest, the guest might decide to only kill a
userspace program or even ignore the machine check.
As this can be a disruptive event nevertheless, we should log this
not only in the VM debug event (that gets lost after guest shutdown)
but also on the global KVM event as well as syslog.
Consolidate the logging and log with loglevel 2 and higher.
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Hendrik Brueckner <brueckner@linux.ibm.com>
|
|
While we check the address for errors, we don't seem to check the bit
offsets and since they are 32 and 64 bits a lot of memory can be
reached indirectly via those offsets.
Fixes: 84223598778b ("KVM: s390: irq routing for adapter interrupts.")
Suggested-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
|
|
HEAD
KVM generic changes for 7.0
- Remove a subtle pseudo-overlay of kvm_stats_desc, which, aside from being
unnecessary and confusing, triggered compiler warnings due to
-Wflex-array-member-not-at-end.
- Document that vcpu->mutex is take outside of kvm->slots_lock and
kvm->slots_arch_lock, which is intentional and desirable despite being
rather unintuitive.
|
|
In some scenarios, a deadlock can happen, involving _do_shadow_pte().
Convert all usages of pgste_get_lock() to pgste_get_trylock() in
_do_shadow_pte() and return -EAGAIN. All callers can already deal with
-EAGAIN being returned.
Fixes: e38c884df921 ("KVM: s390: Switch to new gmap")
Tested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
KVM_CAP_SYNC_MMU is provided by KVM's MMU notifiers, which are now always
available. Move the definition from individual architectures to common
code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
All architectures now use MMU notifier for KVM page table management.
Remove the Kconfig symbol and the code that is used when it is
disabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Relax the maximum allowed Secure Execution (SE) header size from
8 KiB to 1 MiB. This allows individual secure guest images to run on a
wider range of physical machines.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
The shadow gmap returned by gmap_create_shadow() could get dropped
before taking the gmap->children_lock. This meant that the shadow gmap
was sometimes being used while its reference count was 0.
Fix this by taking the additional reference inside gmap_create_shadow()
while still holding gmap->children_lock, instead of afterwards.
Fixes: e38c884df921 ("KVM: s390: Switch to new gmap")
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
It is possible that walk_guest_tables() is called on a shadow gmap that
has been removed already, in which case its parent will be NULL.
In such case, return -EAGAIN and let the callers deal with it.
Fixes: e38c884df921 ("KVM: s390: Switch to new gmap")
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Stop using the userspace address to mark the guest page dirty.
mark_page_dirty() expects a guest frame number, but was being passed a
host virtual frame number. When slot == NULL, mark_page_dirty_in_slot()
does nothing and does not complain.
This means that in some circumstances the dirtiness of the guest page
might have been lost.
Fix by adding two fields in struct kvm_s390_adapter_int to keep the
guest addressses, and use those for mark_page_dirty().
Fixes: f65470661f36 ("KVM: s390/interrupt: do not pin adapter interrupt pages")
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add a new IOCTL to allow userspace to manipulate storage keys directly.
This will make it easier to write selftests related to storage keys.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
While userspace is allowed to have pages of any size, the new gmap
would always use 4k pages to back the guest.
Enable 1M pages for gmap.
This allows 1M pages to be used to back a guest when userspace is using
1M pages for the corresponding addresses (e.g. THP or hugetlbfs).
Remove the limitation that disallowed having nested guests and
hugepages at the same time.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Remove the PGSTE config option.
Remove all code from linux/s390 mm that involves PGSTEs.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Switch KVM/s390 to use the new gmap code.
Remove includes to <gmap.h> and include "gmap.h" instead; fix all the
existing users of the old gmap functions to use the new ones instead.
Fix guest storage key access functions to work with the new gmap.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Refactor some storage key functions to improve readability.
Introduce helper functions that will be used in the next patches.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Implement gmap_protect_asce_top_level(), which was a stub. This
function was a stub due to cross dependencies with other patches.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add some helper functions for handling multiple guest faults at the
same time.
This will be needed for VSIE, where a nested guest access also needs to
access all the page tables that map it.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
New gmap (guest map) code. This new gmap code will only be used by KVM.
This will replace the existing gmap.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add page table management functions to be used for KVM guest (gmap)
page tables.
This patch adds functions to handle CMMA and the ESSA instruction.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add page table management functions to be used for KVM guest (gmap)
page tables.
This patch adds functions to handle memslot creation and destruction,
additional per-pagetable data stored in the PGSTEs, mapping physical
addresses into the gmap, and marking address ranges as prefix.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
