| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
FW_CS_DSP gets enabled if KUNIT is enabled. The test should rather
depend on if the feature is enabled. Fix this by moving FW_CS_DSP to the
depends on clause.
Fixes: dd0b6b1f29b9 ("firmware: cs_dsp: Add KUnit testing of bin file download")
Signed-off-by: Nico Pache <npache@redhat.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250411123608.1676462-4-rf@opensource.cirrus.com
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Enabling a (modular) test should not silently enable additional kernel
functionality, as that may increase the attack vector of a product.
Fix this by making FW_CS_DSP_KUNIT_TEST (and FW_CS_DSP_KUNIT_TEST_UTILS)
depend on REGMAP instead of selecting it.
After this, one can safely enable CONFIG_KUNIT_ALL_TESTS=m to build
modules for all appropriate tests for ones system, without pulling in
extra unwanted functionality, while still allowing a tester to manually
enable REGMAP_BUILD and this test suite on a system where REGMAP is not
enabled by default.
Fixes: dd0b6b1f29b92202 ("firmware: cs_dsp: Add KUnit testing of bin file download")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/73c81ac85e21f1c5a75b7628d90cbb0e1b4ed0fa.1737833376.git.geert@linux-m68k.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This adds a KUnit test suite to test downloading bin files.
The general technique is
1. Create mock bin file content
2. Tell cs_dsp to download the bin file
3. Check in the emulated regmap registers that the correct values have
been written to DSP memory
4. Drop the regmap cache for the expected written registers and then do a
regcache_sync() to check for unexpected writes to other registers.
The test covers ADSP2 v1 and v2, and HALO Core DSPs. (ADSP1 is very
obsolete so isn't tested).
There is a large number of test cases and parameterized variants of tests
because of the many different addressing schemes supported by the Cirrus
devices. The DSP has 2 or 3 memory spaces: XM, YM and ZM. The DSP sees
these using its native addressing, which is word-addressed (not
byte-addressed). The host sees these through one of several register
mappings (depending on the DSP type and parent codec family). The
registers have three different addressing schemes: 16-bit registers
addressed by register number, 32-bit registers addressed by register
number, or 32-bit registers addressed by byte (with a stride of 4). In
addition to these multiple addressing schemes, the Halo Core DSPs have a
"packed" register mapping that maps 4 DSP words into 3 registers. The bin
file addresses the data blob relative to the base address of an algorithm,
which has to be calculated in both DSP words (for the DSP to access) and
register addresses (for the host).
This results in many different addressing schemes used in parallel, hence
the complexity of the address and size manipulation in the test cases:
word addresses in DSP memory, byte offsets, word offsets, register
addresses (either byte-addressed 32-bit or index-addressed 16-bit), and
packed register addresses.
The test cases intentionally have relatively little factoring-out of
similar code. This makes it much easier to visually verify that a test
case is testing correctly, and what exactly it is testing. Factoring out
large amounts of code into helper functions tends to obscure what the
actual test procedure is, so increasing the chance of hidden errors where
test cases don't actually test as intended.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a mock regmap implementation to act as a simulated DSP for KUnit
testing. This is built as a utility module so that it could be used by
clients of cs_dsp to create a mock "DSP" for their own testing.
cs_dsp interacts with the DSP only through registers. Most of the
register space of the DSP is RAM. ADSP cores have a small set of control
registers. HALO Core DSPs have a much larger set of control registers but
only a small subset are used.
Most writes are "blind" in the sense that cs_dsp does not expect to
receive any sort of response from the DSP. So there isn't any need to
emulate a "DSP", only a set of registers that can be written and read
back.
The idea of the mock regmap is to use the cache to accumulate writes
which can then be tested against the values that are expected to be in
the registers.
Stray writes can be detected by dropping the cache entries for all
addresses that should have been written and then issuing a regcache_sync().
If this causes bus writes it means there were writes to unexpected
registers.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Qualify the KConfig symbol for cs_dsp by adding a FW_ prefix so that
it is more explicit what is being referred to. This is preparation for
using the symbol to namespace the exports.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221124134556.3343784-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
wm_adsp originally provided firmware loading on some audio DSP and was
implemented as an ASoC codec driver. However, the firmware loading now
covers a wider range of DSP cores and peripherals containing them,
beyond just audio. So it needs to be available to non-audio drivers. All
the core firmware loading support has been moved into a new driver
cs_dsp, leaving only the ASoC-specific parts in wm_adsp.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210913160057.103842-17-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
