aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/leds/rgb/Makefile (follow)
AgeCommit message (Collapse)AuthorFilesLines
2024-03-07leds: Add NCP5623 multi-led driverAbdel Alkuor1-0/+1
NCP5623 is DC-DC multi-LEDs driver which has three PWMs that can be programmed up to 32 steps giving 32768 colors hue. NCP5623 driver supports gradual dimming upward/downward with programmable delays. Also, the driver supports driving a single LED or multi-LED like RGB. Signed-off-by: Abdel Alkuor <alkuor@gmail.com> Link: https://lore.kernel.org/r/20240305042049.1533279-2-alkuor@gmail.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-11-01leds: Add ktd202x driverAndré Apitzsch1-0/+1
This commit adds support for Kinetic KTD2026/7 RGB/White LED driver. Signed-off-by: André Apitzsch <git@apitzsch.eu> Link: https://lore.kernel.org/r/20231002-ktd202x-v6-2-26be8eefeb88@apitzsch.eu Signed-off-by: Lee Jones <lee@kernel.org>
2023-08-17leds: rgb: Add a multicolor LED driver to group monochromatic LEDsJean-Jacques Hiblot1-0/+1
Grouping multiple monochrome LEDs into a multicolor LED device has a few benefits over handling the group in user-space: - The state of the LEDs relative to each other is consistent. In other words, if 2 threads competes to set the LED to green and red, the end-result cannot be black or yellow. - The multicolor LED as a whole can be driven through the sysfs LED interface. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Reviewed-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230728153731.3742339-5-jjhiblot@traphandler.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-03-23leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator supportChiYuan Huang1-0/+1
The MediaTek MT6370 is a highly-integrated smart power management IC, which includes a single cell Li-Ion/Li-Polymer switching battery charger, a USB Type-C & Power Delivery (PD) controller, dual Flash LED current sources, a RGB LED driver, a backlight WLED driver, a display bias driver and a general LDO for portable devices. Add support for the MediaTek MT6370 Current Sink Type LED Indicator driver. It can control four channels current-sink RGB LEDs with 3 modes: constant current, PWM, and breath mode. Co-developed-by: Alice Chen <alice_chen@richtek.com> Signed-off-by: Alice Chen <alice_chen@richtek.com> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/1df93a583c3f508a7158b83b95857e9bce235e1b.1678430444.git.chiaen_wu@richtek.com
2022-05-07leds: Move pwm-multicolor driver into rgb directorySven Schwermer1-1/+2
The drivers/leds/rgb subdirectory is relatively fresh, so we move this new PWM multi-color driver into it. Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2022-05-04leds: Add driver for Qualcomm LPGBjorn Andersson1-0/+3
The Light Pulse Generator (LPG) is a PWM-block found in a wide range of PMICs from Qualcomm. These PMICs typically comes with 1-8 LPG instances, with their output being routed to various other components, such as current sinks or GPIOs. Each LPG instance can operate on fixed parameters or based on a shared lookup-table, altering the duty cycle over time. This provides the means for hardware assisted transitions of LED brightness. A typical use case for the fixed parameter mode is to drive a PWM backlight control signal, the driver therefor allows each LPG instance to be exposed to the kernel either through the LED framework or the PWM framework. A typical use case for the LED configuration is to drive RGB LEDs in smartphones etc, for which the driver supports multiple channels to be ganged up to a MULTICOLOR LED. In this configuration the pattern generators will be synchronized, to allow for multi-color patterns. The idea of modelling this as a LED driver ontop of a PWM driver was considered, but setting the properties related to patterns does not fit in the PWM API. Similarly the idea of just duplicating the lower bits in a PWM and LED driver separately was considered, but this would not allow the PWM channels and LEDs to be configured on a per-board basis. The driver implements the more complex LED interface, and provides a PWM interface on the side of that, in the same driver. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Tested-by: Marijn Suijten <marijn.suijten@somainline.org> [On the Sony Xperia Nile Discovery, SDM630] Signed-off-by: Pavel Machek <pavel@ucw.cz>